SMD: Table E2E_TEMPLEXTR contains no entries

Hi!
I am about to set up SMD and have problems with the step activation of E2E extractors.
Therefore I done the following:
Tcode SE16 (E2E_TEMPLEXTR), make sure "Maximum No. of Hits" is at
least 500, <F8>, Select All (F9), Delete All.
Then:
1) Download the CSV file attached to this message:
E2E_TEMPLEXTR_SP15.csv
Do not open the file with Microsoft Excel,
as this may garble its content.
2) Execute function module E2E_UPLOAD_TEMPLATE_TABLE in transaction SE37and enter the path to the CSV, execute. This will update the template
table defining which extractors are to be started.
3) Run the setup wizard for managed systems again. If the system is
supported, the appropriate extractors will activated in the Extractor
Framework and a controlling batch process will be created.
I also can see in Self check:
The RFC READ Destination for SID 'PIB' has not been defined in SMSY or the RFC fails to connect to the managed system! Error is 'SM_PIBCLNT000_READ : FM /SDF/E2E_ENABLE_TRACE is not available'
Now I have the problem that none entries exist.
Question:
How to load or manually create the entries in table E2E_TEMPLEXTR?
Thank you very much!
regards
Thom

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

Similar Messages

Which table will contain user entry info

HI all,
I have duplicated user in OID and I am finding the way to clean them up. Any way, I am looking for tables in ODS schema that contained users and group they belong to so I can use ldapdelete to clean them up.
Please let me know which tables in ODS had that info
thanks

if you're just looking for the dn try
ldapsearch -L -b "cn=users,dc=yourdomain" -s sub "objectclass=*" dn | grep "your user"
notice -L will give proper LDIF file notation.
Don't touch ODS schema tables unless Oracle Support tells you what to do.
regards,
--Olaf

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

T77RCF_SMASK table entries: Error - Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071

Team,
Table T77RCF_SMASK has reference to T77RCF_SMG_ASM.
When compared the two tables we found that following entries are missing in T77RCF_SMASK:
71
72
73
74
75
78
92
95
96
Can you please guide on what should be the entry for these in table T77RCF_SMASK? Would appreciate if full table entries are shown in answer for future users.
Missing entries are causing error "Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071 and so on in SLG1 logs display.
Regards
Yash

The table enteries should be as attached
Regards
Khalid

SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'?

Gurus,
when user is updating size grid in matl master, the third party legacy system is reciving the bwlow error:
SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'
could u all pls advise as why this error occured?
Thanks in advance..

t100 is the table that holds all messages in SAP.
The key to access this table is the message class and the message number.
Reading the message that you provided, it looks like SAP is searching for a message number 000 without having a message class.
Do you use any exit with own programming ?
You probably need to debug the program to find the root cause

Where Is Table That Contains DTP Filter Entries?

Hi,
I am trying to find the table where my "Filter" entries for a DTP are contained. I would like to use these entries in my start routine. In the old 3.5, the table was RSSELDONE, but I can't seem to find the NW04S version of this table.
Thanks for your help.

P-Dub:
To date I have not found a table that specifically contains the DTP filter entries. If you are looking for a way to access this information from a transformation though, you may reference following logic:
create an internal table (itab) of type RSBK_S_RANGE in the local portion of a start routine.
fill the internal table (itab) as follows:
itab[] = p_r_request->GET_TH_RANGE( ).
The selection criteria of the DTP will then be available within your transformation in the internal table itab.
All DTP attributes at run time can be accessed in this way. For a list of the methods available, look at the interface if_rsbk_request_admintab_view, know as p_r_request in the start routine.
==============Start Routine CODE Example - BEGIN==============
      Method start_routine
      Calculation of source package via start routine
<-> source package
METHOD start_routine.
*=== Segments ===
    FIELD-SYMBOLS:
      <SOURCE_FIELDS>    TYPE tys_SC_1.
    DATA:
      MONITOR_REC     TYPE rstmonitor.
$$ begin of routine - insert your code only below this line        -
... "insert your code here
DATA: i_dtpfilter type standard table of RSBK_S_RANGE
       initial size 0.
break CONTDG.
i_dtpfilter[] = p_r_request->GET_TH_RANGE( ).
==============Start Routine CODE Example - END=================
Good luck,
The Dude

Dynamic Select Query including Dynamic Tables with For all Entries

Hello everyone,
I need to create a select query which involves using of Dynamic Tables.
Suppose I have a dynamic table <d1> which consist of let say 10 records.
Now i need to make a select query putting data into another dynamic table <d2>
CONCATENATE keyfield '=' '<d1>' INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <d1>
        FOR ALL ENTRIES IN <d1>
WHERE (g_condition).
But it is giving dump.
Please help me on this....

Short text
    A condition specified at runtime has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZNG_CUSTOMWRITE" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
    procedure "WRITE_ARCHIVE_PROD" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The current ABAP program has tried to execute an Open SQL statement
    which contains a WHERE, ON or HAVING condition with a dynamic part.
    The part of the WHERE, ON or HAVING condition specified at runtime in
    a field or an internal table, contains the invalid value "ZCOURIER-ZCOURIERID".
CONCATENATE keyfield '=' g_header INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <dyn_table1>
FOR ALL ENTRIES IN <dyn_table>
WHERE (g_condition).

Is it possible to transport table with over 1500 entries?

How can I transport a table with over 1500 entries from QA to Prod? It is not a Z table. Anyone have steps do that, please?
Thanks

Prakash,
The delivery class of table AUFM (A) indicates that it is an application table, not a customising table and as such should not be transported.
This table contains many foreign key filelds within it. If you transported this table alone to your production system you would probably render the system unusable.
This table should only be copied as part of a client copy, when other related tables would also be copied.
You should ask the person requesting the transport why they want to copy this table alone to your production system.
Gary

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

Table that contain epstp field

dear all expert
i want to create report for pr relase
i have some problem, in item category i found epstp field, but i cannot found the table
in eban i found pstyp, but its different with epstp
please help me to found table that contain epstp field

Hi,
you can find in T163X and T163Y.
epstp is Item category in purchasing document.
Regrds,
Nikhil.

Intenal table as container variable in the alert category

Hi
Is it possible to create internal table as Container Variable in the alert category. If it is possible how can we pass the data to this internal table in the Run time to the funtion module SALRT_CREATE_API.I have tried this to pass the data to the container parameter
it_container ,but i was unable to achive it .If anyone has come across this please guide me .
Thanks and Regards,
Venkat

You can use the Forms "From Clause Query" as the datasource for the data block. Then you can change the QUERY_DATA_SOURCE_NAME using set_block_property, so you can use any SQL statement you like. Of course you must name/alias the columns in a consistent manner so that the number of database items on the block matches those being queried.

Find table which contains "job name" and "Mail sent to users"

Hi Folks,
I have a requirement whenever I run a job(xyz), it send mail to users, Can you please let me know the table which contains both job name and successfully mail sent to users.
Thanks in Advance.
Lakshmi.

Hi,
You can find the job name in TBTCJOB.
Regards,
Ravi
Note : Please mark the helpful answers

Refresh tool and table name containing database name in Mysql

Hi,
when refreshing the database schema and my table name contains a database name (for example "my_other_db.my_other_table"), the refresh tool never sees weather "my_other_db.my_other_table" already exists or not. so it always generates a create-table-statement (which is syntactically correct, but of course fails, because that table exists already).
Is there known workaround for it? I am using Mysql 5.0.x, jdbc driver 5.0.7, Kodo 4.1.4 (but this problem was there before).
Right now i'm deleting the database names from my package.jdo-files, then doing the refresh command and after that i put back the database names. At runtime Kodo works very well with the database name before the table name.
Thanks very much,
Markus

1. For WBS element under consideration, get OBJNR from PRPS table
2. Get PO numbers from COEP where OBJNR = PRPS-OBJNR obtained in step 1

Delete any entry in the table before adding an entry?

Hello ABAP Experts,
I have the data in the work area. I can modify / update / insert to the table.
How to write the ABAP code for this situation.
1) to delete any entries in the table
2) update this entry
so finally always there would be only one entry.
Suggestions appreciated.
Thanks,
BWer

Hi,
Delete the entries of table by this stmt.
DELETE FROM (dbtabname).
Then insert the values from workarea
INSERT INTO dbtab VALUES <work_area>.
And u can upadte the entry with values of workarea by this stmr.
UPDATE (dbtabname) FROM wa.
Dont use MODIFY. It will add a new record if its a new entry.
Rgds,
Prakash

How to create a table which contains relational data and Document data

hai all
i need to create a table which contains relational data(i mean coulumns whose data types are type NUMBER,VARCHAR) and documents(like xml file/html file/image)using iFS.
when i store the document data(xml data/html data) in the iFS ,it will be stored as Document Object.so how do i relate this document object belongs to a particular row in a table.
do guide me
thanks

Please see reply at http://technet.oracle.com:89/ubb/Forum36/HTML/000778.html

SMD: Table E2E_TEMPLEXTR contains no entries

Similar Messages

Maybe you are looking for