SMF and multi-user service not running

Hi,
I have an issue with several services not starting ...
As you can see, the multi-user services is "offline*" And it remains like this...
I've recently patched the system hoping it would resolve this issue, but no luck. Restarting the server does not help.
# svcs | grep multi-user
offline 14:14:21 svc:/milestone/multi-user-server:default
offline* 14:14:53 svc:/milestone/multi-user:default
# svcs -xv
svc:/milestone/multi-user:default (multi-user milestone)
State: offline since Wed Dec 05 14:14:53 2007
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: man -M /usr/share/man -s 1M init
See: /var/svc/log/milestone-multi-user:default.log
Impact: 6 dependent services are not running:
svc:/system/webconsole:console
svc:/milestone/multi-user-server:default
svc:/system/basicreg:default
svc:/system/zones:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
I've tried to enable the services above manually, but had no luck.
Thanks.

Darren_Dunham wrote:
>
# svcs | grep multi-user
offline 14:14:21 svc:/milestone/multi-user-server:default
offline* 14:14:53 svc:/milestone/multi-user:default
# svcs -xv
svc:/milestone/multi-user:default (multi-user milestone)
State: offline since Wed Dec 05 14:14:53 2007
Reason: Start method is running.The start method of milestone/multi-user is responsible for (among other things), running all the /etc/rc2.d scripts. If you've placed a startup script in there and it's hanging, you'll see this behavior. From memory, I think there's a 30 minute timeout before it gives up and continues.
During the problem period, you probably want to do a 'ps -ef | grep rc' and look for any rc scripts running. That will probably point to a startup script hanging.
DarrenThanks Darren,
That was the problem. A hung script in rc2.d/
What is odd, is that this script is the same on many of our machines and no problems have been found until now. Thanks for your help. Killing that processes made everything start properly.

Similar Messages

  • IPM and dynamic user tracking not running properly.

    Hello, I've got two problems after a reinstallation of CiscoWorks LMS 3.2.
    Versions of software components:
    LMS-3.2
    Campus Manager-5.2.1
    CiscoView-6.1.9
    CiscoWorks Assistant-1.2.0
    CiscoWorks Common Services-3.3.0
    Device Fault Manager-3.2.0
    Integration Utility-1.9.0
    Internetwork Performance Monitor-4.2.0
    LMS Portal-1.2.0
    Resource Manager Essentials-4.3.0
    First probelm I have sounds pretty much like this thread:
    https://supportforums.cisco.com/message/3064784#3064784
    Source device is a WS-C3560-8PC - 12.2(55)SE1 - C3560-IPSERVICESK9-M
    I configured a IPM collector, if I have a look at the "Collector Management" the collector is running and I can also monitor the running collector.
    But if I have a look at the running config of the switch, there is no ip sla collector configuration but I can see the ip sla statistics via the show command.
    #sh ip sla configuration 135123
    IP SLAs, Infrastructure Engine-II.
    Entry number: 135123
    Owner: ipm|XXXS1077
    Tag: QA-Site1-Site2
    Type of operation to perform: udp-jitter
    Target address/Source address: target ip address/source ip address
    Target port/Source port: 2000/0
    Type Of Service parameter: 0xB8
    Operation timeout (milliseconds): 5000
    Codec Type: g729a
    Codec Number Of Packets: 1000
    Codec Packet Size: 32
    Codec Interval (milliseconds): 20
    Advantage Factor: 12
    Verify data: No
    Vrf Name:
    Control Packets: enabled
    Schedule:
        Operation frequency (seconds): 60
        Next Scheduled Start Time: Start Time already passed
        Group Scheduled : FALSE
        Randomly Scheduled : FALSE
        Life (seconds): Forever
        Entry Ageout (seconds): 3600
        Recurring (Starting Everyday): FALSE
        Status of entry (SNMP RowStatus): Active
    Threshold (milliseconds): 5000
    Distribution Statistics:
        Number of statistic hours kept: 2
        Number of statistic distribution buckets kept: 1
        Statistic distribution interval (milliseconds): 20
    Enhanced History:
    #sh ip sla statistics
    Round Trip Time (RTT) for       Index 135123
    Type of operation: jitter
            Latest RTT: 45 ms
    Latest operation start time: 14:36:31.759 MET Wed Mar 16 2011
    Latest operation return code: OK
    RTT Values
            Number Of RTT: 1000
            RTT Min/Avg/Max: 21/45/60 ms
    Latency one-way time milliseconds
            Number of Latency one-way Samples: 0
            Source to Destination Latency one way Min/Avg/Max: 0/0/0 ms
            Destination to Source Latency one way Min/Avg/Max: 0/0/0 ms
    Jitter time milliseconds
            Number of SD Jitter Samples: 999
            Number of DS Jitter Samples: 999
            Source to Destination Jitter Min/Avg/Max: 0/3/15 ms
            Destination to Source Jitter Min/Avg/Max: 0/1/9 ms
    Packet Loss Values
            Loss Source to Destination: 0           Loss Destination to Source: 0
            Out Of Sequence: 0      Tail Drop: 0
            Packet Late Arrival: 0  Packet Skipped: 0
    Voice Score Values
            Calculated Planning Impairment Factor (ICPIF): 11
    MOS score: 4.06
    Number of successes: 18
    Number of failures: 0
    Operation time to live: Forever
    #sh run all | include 135123
    Any suggestions? Am I right?
    The second problem is about the dynamic user tracking like these theads https://supportforums.cisco.com/message/3135881#3135881 or
    https://supportforums.cisco.com/message/3195492#3195492
    Access switches are configured properly, the configuration ran without any problems with the previous installation.
    No changes done at the configuration, using the default trap listener port etc.
    In the macuhic.log file I get entries like in the attached txt.
    When I try to run a full Campus Manager Data Collection I get the following errormessage:
    Failed to start acquisition: Construction of XML data required for UT is in progress.Please try after some time
    Also any suggestions? Am I right, too?

    By default IP SLA collectors installed by IPM do not appear in the running configuration.  If you want to install the collectors into the running configuration, then set the "Copy IPSLA Configuration to running-config" property under IPM > Admin > Application Settings, then delete and recreate the collector.
    Your Campus problem could be CSCtd49439 (a patch is available by contacting TAC).  However, you should start a new thread for your Campus problem.

  • Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

    Hi All,
    I'm getting the below error in My SHarepoint 2013 search Administration page.
    Crawler background activity - The search application 'Search Service Application 1' on server ""  is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
    on the server.
    and when i click on Crawl Log and content source
    it throws the below error
    The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
    the service is enabled. This might also be because an indexer move is in progress
    When i check the search status
    Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
    As of now search service application is online and search is working.But not sure why it throws the above error.
    I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
    But no luck,This is happening in my prodcution environment.
    Any help will be greatly appreciated.
    There are the logs i have found
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
    on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
    Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)    
    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
    Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
    - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
    http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
    Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
    Anil Loka

    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
    Check options.."Web Server: Configuration" within LabVIEW.
    LabVIEW Champion . Do more with less code and in less time .

  • Auto-start services not running :Shell Hardware Detection in my Health Reports

    Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
     Auto-start Services Not Running Shell
    Hardware Detection.
     I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
    Any Advice what might be the problem? 
     

    Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
    From http://technet.microsoft.com/en-us/library/hh831394.aspx:
    "After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
    only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
    Services in the thumbnails for server groups, including the
    All Servers group. In the Services Detail View dialog box, on the
    Services drop-down list, clear the check box for Shell Hardware Detection, and then click
    OK."
    That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
    Mark Berry
    MCB Systems

  • Diagnostics policy service not running on Windows 7 home premium

    I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
    service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
    Error code is 5: access denied

    Hi,
    Thanks for the post!
    Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
    After that, check if you can connect to the internet.
    For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
    Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
    Restart the computer to check if this service is working now.
    Regards,
    Miya  
    This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • Web pages are very slow to load airport is fine and other users do not have any problems

    my macbook pro is very slow to load web pages airport is running fine and other users do not have any issues?

    Likely a corrupted cache, do #12 and #13 here, if that doesn't work run through the Steps 1+
    Step by Step to fix your Mac
    Why is my computer slow?

  • Golden gate extract and replicate process are not running.

    All,
    I am trying replicate data between two oracle databases using golden gate.
    I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
    1. I have two databases PROD, UAT both are running on 11.2 oracle home.
    2. Created the ggate user both the databases, and enabled supplemental logging.
    3. Ran the following scripts in both databases.
    SQL> @marker_setup.sql
    SQL> @ddl_setup.sql
    SQL> @role_setup.sql
    SQL> grant GGS_GGSUSER_ROLE to ggate;
    SQL> @ddl_enable.sql
    4. Connected the source database (PROD) in ggsci prompt
    GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
    add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
    edit params ext1
    EXTRACT ext1
    USERID ggate@PROD, PASSWORD 123456
    RMTHOST home-c07402bbc5, MGRPORT 7840
    rmttrail C:\app\Bhanu\Goldengate\lt
    ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
    TABLE bhanu.*;
    5. Connected the target database(UAT) in ggsci prompt
    add checkpointtable ggate.checkpoint
    edit params ./GLOBALS
    GGSCHEMA ggate
    CHECKPOINTTABLE ggate.checkpoint
    add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
    edit params rep1
    replicat rep1
    ASSUMETARGETDEFS
    userid ggate@UAT, password 123456
    discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
    map bhanu.*, target kiran.*;
    After that started the extract, replicat using
    start extract ext1, start replicate rep1
    Now the status.
    GGSCI (home-c07402bbc5) 103> info all
    Program Status Group Lag Time Since Chkpt
    MANAGER RUNNING
    EXTRACT STOPPED EXT1 00:00:00 00:11:43
    REPLICAT STOPPED REP1 00:00:00 00:21:16
    Can you please help me what is wrong in my setup and why extract and replicate process are not running.
    Edited by: user12178861 on Nov 19, 2011 11:22 AM

    Thanks for your quick reply.
    I have done few changes but extract, replicate process not running.
    couple of points I would like to share with you regarding my setup.
    1. I am using single golden date instance to replicate the data between PROD and UAT databases.
    2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
    Successfully logged into database.
    GGSCI (home-c07402bbc5) 2> info all
    Program Status Group Lag Time Since Chkpt
    MANAGER RUNNING
    EXTRACT STOPPED EXT1 00:00:00 01:23:29
    REPLICAT STOPPED REP1 00:00:00 01:33:02
    GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
    ERROR: REPORT file EXT1 does not exist.
    GGSCI (home-c07402bbc5) 4> start er *
    Sending START request to MANAGER ...
    EXTRACT EXT1 starting
    Sending START request to MANAGER ...
    REPLICAT REP1 starting
    GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
    ERROR: REPORT file EXT1 does not exist.
    GGSCI (home-c07402bbc5) 6> info all
    Program Status Group Lag Time Since Chkpt
    MANAGER RUNNING
    EXTRACT STOPPED EXT1 00:00:00 01:24:10
    REPLICAT STOPPED REP1 00:00:00 01:33:44
    Target :
    GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
    ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
    GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
    Successfully logged into database.
    GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
    ERROR: REPLICAT REP1 already exists.
    GGSCI (home-c07402bbc5) 6> delete replicat rep1
    Deleted REPLICAT REP1.
    GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
    REPLICAT added.
    GGSCI (home-c07402bbc5) 8> edit params rep1
    GGSCI (home-c07402bbc5) 9> start er *
    Sending START request to MANAGER ...
    EXTRACT EXT1 starting
    Sending START request to MANAGER ...
    REPLICAT REP1 starting
    GGSCI (home-c07402bbc5) 10> info all
    Program Status Group Lag Time Since Chkpt
    MANAGER RUNNING
    EXTRACT STOPPED EXT1 00:00:00 01:29:46
    REPLICAT STOPPED REP1 00:00:00 00:00:48
    3. Is mandatory that I need two golden gate instances running each side ?
    Thanks for spending your time on this problem.

  • The Data access service not running or not yet initialized.

    Hello guys , 
    i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error 
    OS : Windows 2012r2 patched and scom 2012 r2
    sql : 2012 r2 enuff database size  
    tried few things as :
    1. change the account to domain admin for system center data acess service  still no luck
    2. created registry keys for servicepipetimeout to 6000 bt still nit working
    3.  Refresh sql account used for sccom data aceess service  still no luck 
    4. the service disappears as running after 30 seconds and the console is unable to open 
    kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
    thanks guys in advance
    Basit Siddiqui
    AIG

    Check that following:
    Verify permission of SCOM Account on sysadmin and OM DB.
    Check firewall that is disable
    Check antivirus that didn't block scom folders or services.
    Check SQL services is running
    Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
    Also you can check below link
    http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
    Technical | Twitter:
    Mai Ali

  • Window search service not running

    window search service not running how i can fix it?
    This question was solved.
    View Solution.

    Hi,
    From the Desktop, hold down the Windows key and press

  • [mostly solved] Strigi service not running

    Hello,
    Since I am constantly fluctuating between a rich and a minimalistic desktop environment, I'm trying out KDE once again. The Soprano/Nepomuk/Strigi stuff seems really interesting but I fail at using it.
    When I go to System Settings -> Advanced -> Desktop Search it says "Strigi service not running". While Nepomuk is activated, I can't activate Strigi. When I set the checkbox for Strigi and apply, the message is still there. When I close the widow and go back again, the checkbox is deactivated again.
    The searchbar in dolphin never finds anything and there is no interface for tagging or commenting files.
    However, I can index files and find stuff when I run strigiclient.
    What may the problem be?
    Thanks,
    Viv
    Last edited by V for Vivian (2010-06-30 07:48:54)

    Steigi seems to be installed.
    viv ~ $ pacman -Q strigi
    strigi 0.7.2-2
    I'm considering a clean Chakra installation but this seems kind of unaesthetic and stupid.
    edit01: I've just renamed my .kde4 folder and restarted KDE. Now Strigi is indexing and I can tag files, everything works. Some kind of configuration seems to have been wrong. I think I can figure this out.
    edit02: I had to replace the .kde4/share/apps/nepomuk folder with a clean one, maybe something with the database or how it is accessed. Don't have time to go into this right now, I'm just happy it works now.
    Last edited by V for Vivian (2010-06-30 08:16:11)

  • Windows Modules Installer - Autostart Service Not Running

    I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error.  I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service.  However,
    from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan. 
    Just curious if anyone else is getting this.
    Autostart Services Not Running:
    Windows Modules Installer

    Hi MattSla,
    On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
    Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
    I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
    It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
    If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
    us to go further analyze.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • HT2736 I gifted an application and the user has not redeemed code...lost her email can I send this to her again?

    I gifted an application and the user has not redeemed code...lost her email can I send this to her again?

    Yes, you can resend. See:
    http://support.apple.com/kb/HT1541
    Regards.

  • I just finished installing 11.3 and now iTunes will not run.

    I just finished installing 11.3 and now iTunes will not run. I have uninstalled itunes and resinstalled several times. Now when I attempt to start iTunes i get the following two error dialogues:“The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll. and was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)

    Hi Greybeard1955,
    Welcome to the Apple Support Communities! I understand that iTunes is not opening after uninstalling and re-installing it. When iTunes is uninstalled on a Windows computer, all of its components must be removed as well and they must be removed in a specific order. Below is the article for uninstalling on Windows 7. I recommend uninstalling iTunes and all components in order and reinstalling fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    I hope this helps,  
    -Joe

Maybe you are looking for