SMI: Error with PO confirmation

Hi all,
I'm implementin SMI scenario with SNC 5.1, I've created a RO from SMI Details (SNC web UI), I've published it and VendorGeneratedOrderConfirmation.XML was sent from SNC to ECC for PO creation.
In ECC the PO is created but there is the following error with the incoming IDOC in ECC:
Errors occurred confirming purchase order <purch. order number>
Message no. WVMI215
I've also checked the SAP note 202667, but it is not applicable in my case because I've ECC 6.0, but in any case I've checked and the form is alredy implemented.
Why I have this problem?
How can I solve it?
Thank you in advance!

Hello,
In ECC  go to WVM7 (Transaction code) &  maintain:
1) customer sold to party(your customer bp org created in SNC)
2) plant
3) vendor
4) purchasing document type
save above setting & reprocess failed idoc.
Regards,
Nikhil

Similar Messages

  • Error while doing confirmation with cor6

    Dear PP gurus,
    I am getting following error while doing confirmation. please suggest.
    "Error while importing from memory QAPO SAPLQEEV
    0400000363"
    Thanks in advance
    Kailash T.

    Hi,
    The structure QAPO relates to Inspection operation records & the program - SAPLQEEV relates to Spec. tables for results recording. Hence would suggest to discuss this with your QM personnel.
    Also was able to find a link which had a same issue, but no solution posted, have a look if it helps in anyway
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=173200
    Also refer to OSS note - 334400. If all the above does not resolve the issue, raise an OSS message with SAP.
    Regards,
    Vivek

  • Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please t

    Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please try again. If it continues to fail contact adobe support. Please assist me asap, i need this working ASAP as i specially purchased for immediate use.. thanks:)

    No, there was no option for enter the serial number, which i gather u mean by S/N?

  • SMI error on Web UI of SNC 5.1

    Dear experts,
    I'm working on SMI (Supplier Managed Inventory) implementation with SAP SNC 5.1. I'm trying  to do a demo on SNC.
    At moment I have:
    1) Created our set of master data.
    2) Configured the CIF communication to send from ECC to SNC the maser data: Material, Plant/Location, Vendor/Location, Contract.
    3) Sent successfully the Master data from ECC to SNC according to the CIF communication defined before.
    4) Configured Partner Profile in ECC.
    5) Created a Business Partner in SNC.
    6) Created a Transportation Line in SNC.
    7) Created a demand in ECC.
    8) Sent successfully the demand from ECC to SNC through PI (by PROACT and related XML).
    9) I have approached the portal on Web User Interface where the Vendor creates the Replenishment Plan (SMI Monitor details), here I can see the material, the plant but there is an error with display of demand.
    Here the error message is:
    Time series error in class /SCF/CL_ICHDM_DATAAXS method /SCF/IF_ICHDMAXS_2_CNTL~SELECT
    Planning object structure 9AINVM1 was not found
    I have seen and implemented the customization of OSS note 1019289 but the error is still there.
    I'm going crazy to solve it. Could you please help me?
    Thank you very much in advance for your support.
    Nicola
    Edited by: PTP Team Accenture on Jul 11, 2011 9:57 PM

    Hello Nicola,
    To activate Planning object structure 9AINVM1 go to transaction code:/N/SCA/TSDM09 select inactive Times series data type INVM1(Note there will be 2 INVM1 time series data type one with active check box checked and second with uncheck check box select the second one uncheck INVM1).
    Select Active planning Object structure and execute.
    If you are still getting same problem then checkout the SAP note 1143456.
    Regards,
    Nikhil

  • Error while posting confirmation for limit PO

    Hi Experts,
    we are having a standalone scenario(SRM 7) and the issue is as mentioned below
    The situation is that the PO is a limit order with 2 line items. The first line item is complete and has been closed off with the u201Cno further confirmation/invoiceu201D indicators selected. However the 2nd line still has some limit remaining but the when the central confirmations attempts to enter a good receipt against the line they get an error message which is "No Confirmation could be entered for purchase order"
    please guide me how to solve this.
    regards
    smita

    Hi,
    please find furhte information.
    a limit sc is created for a value of 37000 GBP and after approval it created a PO. but the user went and added a line item directly in PO for 40000 GBP. Now the total value of SC is 77000 GBP.
    user has created a confirmation for 36000GBP and selected no confirmation required further.there is no issues with this lin item
    but with the second line item he posted confimation for value 37000 gbp and invoiced for 30000 GBP.
    when i am trying to post confirmation for 3000 GBP system is throwing an error that "no confirmation could be entered for purchase order"
    could any one guide me how to solve this or any suggestions for solving this.
    regards
    smita

  • Deployment Manager Error with Oracle Weblogic Server 10.3.1

    I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
    Database:Oracle 11gR2 (remote machine).
    **I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
    The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
    As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
    "Either your session timed out or you are trying to access a page without logging in".
    Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
    Deployment Manager Error with Oracle Weblogic Server
    Can any one suggest any workaround or solution for this problem.
    Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
    Thanks in Advance
    Sudheer
    Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

    You are facing this issue because you're using a non certified combination.
    Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

  • Rhsnippet.apj Error with RoboHTML 11 Project on Network

    I have an RH 11 project on a network drive. The project has 485 snippets. When adding or modifying snippets I get the following error:
    An error occurred while trying to read data from <n:\roboHelp Projects\\rhsnippet.apj <1>.
    When I open the rhsnippet.apj file, the file is truncated like this:
    <file>
                <name>mysnippet.hts</name>
                <comments></comments
    It seems that RoboHelp cannot complete writing to the APJ file.
    After closing and reopening the project, I then get a message saying the cpd is corrupt. After deleting the cpd and reopening the project, I still get a message saying the project is corrupt.
    The only way I have found to fix the project is to move the project back to a local drive, delete the cpd, delete the rhsnippet.apj file and re-import all the snippets.
    I have seen a similar issue which was resolved by moving to another network drive. I moved my project to another network drive but the issue still occurred.
    rhsnippet.apj Error with RoboHTML 10 Project on Network
    My experience with R10 R11 projects on a network drive has been problematic, despite Adobes assertion that R11 and R10 projects now work on network drives. For example, Adobe support confirmed that RoboHelp does not support projects on a network drive that uses DFS (Distributed File System). I have found that large projects seem to be problematic on network drives.
    I suspect that part of this issue is the large amount of snippets I have, as other projects on the network drive don't appear to have this issue as they do not contain a large amount of snippets.
    If anybody else has experienced a similar issue with projects on a network drive related to snippets I'd be grateful for some advice.

    Thanks for the advice Peter, but deleting the CPD does not fix the issue. I have 500 snippets because I have 500 fields (and growing all the time) to document that can appear in multiple reports and also require that each field is documented separately. So although I seem to be pushing the envelope with the amount of snippets, I am grateful for the existence of snippets because trying to document this without snippets would be a nightmare!
    One thing that annoys me is that you cannot apply a style sheet to multiple snippets at the same time. At least I have not found a way. Is there a way of doing this – short of editing the HTML for each snippet individually? I will add this to a feature request for RoboHelp as well as log a bug report with Adobe.

  • Error in Service Confirmation in sapcrm 2007

    Hi Experts,
    I  had created Service order with a Spare Part and then did the service confirmation as a followup process 
    as part of  Sap Best Practices Scenario C69 Service Order Management in integration with  SAP R/3
    I am getting the below error in Service Confirmation document
    Fld selectn for mvmt type 291 / acct 608000 differs for Commitment item(020) (Notification E M7 093)
    Please suggest the solution for the same.
    Thanks in advance
    Pavan

    Hi,
    This error is encountered if there are difference in the Field Selection of the GL account group and the movement type. This both have to be similar.
    Made changes in R3 field settings
    Tcode: OBC4
    Select 0001 and click on Field status groups
    Select G004 and click on Field Status button
    From the list displayed select Additional account assignments
    The fields Commitment item (Radio Button)
    Check if this field is marked as Opt Entry
    Check fields for movement type 291 in tcode OMJJ
    Regards,
    PP

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • Odd Error with decode function in Order By Clause

    I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
    select task_id, display_date, remark_id from task_list
    where task_id > 1000
    order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
    returns the error:
    select task_id, display_date, remark_id from task_list
    ERROR at line 1:
    ORA-00932: inconsistent datatypes: expected NUMBER got DATE
    I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

    I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
    The Order by was rewritten like this:
    order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
    decode(pSort, 'Remark_ID',Remark_ID);
    Thanks

  • XML Publisher Error with reports published in XML publisher

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?

    Hi Ark,
    In order to generate a report using xml publisher. we need the following.
    1. XML Data
    2. Template file (RTF/PDF/..)
    XML data will not be created by the template file.
    We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
    Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
    Thanks,
    K.Nataraja Suthan,

  • Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

    Hi,
    I bought Mainstage 3 for my MBP (15'' 2011).
    When i click con "perform" i get graphic errors.
    I have the same issue with the old Mainstage version since Mountain Lion.
    Also a fresh installation didn't help.
    I think i'm not the only one with this issue!
    I don't know how to report a bug?
    Perhaps someone can help me.
    (and  I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
    /forgotten ebi
    So, here an example how it looks like when i click on "perform":

    Same configuration,same problem. BUT I found a workaround.
    Mainstage has this error with the AMD video card and/or a second monitor connected.
    With a little app (http://gfx.io)  it's possible to really force the MBPro to use the Intel Graphics card.
    This will work only with the internal screen, not with a second screen connected.
    And sometimes you need to restart, to really make the Intel video card free.
    This works fine...In the meantime of a fix.

  • Error with an infoset in BI

    HI BI gurus,
    we have a problem with an infoset.
    We create an infoset in RSA1 linked to a cube and a DSO.
    We activate it in english without problems and I can create a query with no errors (with a english logon).
    If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
    Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
    Thanks for any help.
    SB

    Hi,
    is italien installed as a language in your system?
    Siggi

  • I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos.  It wont tell me which picture is the issue.

    I took a lot of pictures and video on my recent trip to Ireland.  Now I am trying to download the photos and videos from my iphone to my mac - iphoto.  I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures.  Help!!

    Try using Image Capture to download to a folder on the Desktop.  If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

Maybe you are looking for