SMS Messages taking too long

The last week, when I send a text messge, it says it was sent, but it is not recieved by the recipient for about 3 hours. Someone sent me a text message and I did not get it for 12 hours! I have AT&T. Is it my phone or my carrier? I have no idea where to start!

I would start with your carrier if you are showing the messages sent etc, it sounds like an issue on their network.

Similar Messages

  • FaceTime and i message taking too long to verify apple id

    Anyone have a solution?  Apple Id and password works everywhere else on computer except on face time and iMessage. 

    Hi NeedingHelp,
    I am able to connect to them at this time. It's possible that this was a temporary issue with their servers.
    Are you still having trouble accessing www.smallworlds.com? If so, is this the only website that you are encountering problems accessing?
    Please let us know if your problem is resolved, or if you have any opther questions.
    Thanks!!
    - Ralph

  • AirPlay Screen Mirroring (Mavericks) disconnects frequently with "Feedback taking too long to send" message

    My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
    In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
    I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
    I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
    I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
    My questions are:
    - is anyone else experiencing this type of problem? any other solutions recommended?
    - is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
    - does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
    - any fix planned for this issue?
    From: "/var/log/system.log":
    Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
    Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
    Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
    Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
    Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
    Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
    Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
    Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
    Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
    Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
    Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
    Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
    Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
    Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
    Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
    Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
    Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
    Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
    Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
    Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
    I am happy to provide more information if needed.
    Thank you.
    -Tim

    I'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
    5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
    5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
    The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds. 
    This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
    I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point.

  • Browser times out when trying to view my website - says the server is taking too long. And no, I don't have a firewall.

    I can't view my website at www.artisancandies.com, even though it's working and everyone else seems to see it. No, I don't have a firewall, and it's not because of my internet provider - I have AT&T at work, and Comcast at home. My husband can see the site on his laptop. I tried dumping my cache in both Firefox and Safari, but it didn't work. I looked at it through proxify.com, and can see it that way, so I know it works. This is so frustrating, because I used to only see it when I typed in artisancandies.com - it would never work for me if I typed in www.artisancandies.com. Now it doesn't work at all. This is the message I get in Firefox:
    "The connection has timed out. The server at www.artisancandies.com is taking too long to respond."
    Please help!!!
    Kristen Scott

    Linc, here's what I've got from what you asked me to do. I hope you don't mind, but it was simple enough to leave everything in, so you could see the progression:
    Kristen-Scotts-Computer:~ kristenscott$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Kristen-Scotts-Computer:~ kristenscott$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    WARNING: Improper use of the sudo command could lead to data loss
    or the deletion of important system files. Please double-check your
    typing when using sudo. Type "man sudo" for more information.
    To proceed, enter your password, or type Ctrl-C to abort.
    Password:
    com.microsoft.office.licensing.helper
    com.google.keystone.daemon
    com.adobe.versioncueCS3
    Kristen-Scotts-Computer:~ kristenscott$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    com.google.keystone.root.agent
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
    Kristen-Scotts-Computer:~ kristenscott$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    Adobe AIR.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    Disabled Plug-Ins
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    Flip4Mac WMV Plugin.webplugin
    Google Earth Web Plug-in.plugin
    JavaPlugin2_NPAPI.plugin
    JavaPluginCocoa.bundle
    Musicnotes.plugin
    NP-PPC-Dir-Shockwave
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    Scorch.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    flashplayer.xpt
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    npgtpo3dautoplugin.plugin
    nsIQTScriptablePlugin.xpt
    /Library/LaunchAgents:
    com.google.keystone.agent.plist
    /Library/LaunchDaemons:
    com.adobe.versioncueCS3.plist
    com.apple.third_party_32b_kext_logger.plist
    com.google.keystone.daemon.plist
    com.microsoft.office.licensing.helper.plist
    /Library/PreferencePanes:
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    VersionCue.prefPane
    VersionCueCS3.prefPane
    /Library/PrivilegedHelperTools:
    com.microsoft.office.licensing.helper
    /Library/QuickLook:
    GBQLGenerator.qlgenerator
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    Google Camera Adapter 0.component
    Google Camera Adapter 1.component
    /Library/ScriptingAdditions:
    Adobe Unit Types
    Adobe Unit Types.osax
    /Library/StartupItems:
    AdobeVersionCue
    HP Trap Monitor
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Internet Plug-Ins:
    Move_Media_Player.plugin
    fbplugin_1_0_1.plugin
    Library/LaunchAgents:
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    com.apple.FolderActions.enabled.plist
    com.apple.FolderActions.folders.plist
    Library/PreferencePanes:
    A Better Finder Preferences.prefPane
    Kristen-Scotts-Computer:~ kristenscott$

  • Oracle - Query taking too long (Materialized view)

    Hi,
    I am extracting billing informaiton and storing in 3 different tables... in order to show total billing (80 to 90 columns, 1 million rows per month), I've used a materialized view... I do not have indexes on 3 billing tables - do have 3 indexes on Materialized view...
    at the moment it's taking too long to query the data (running a query via toad fails and shows "Out of Memory" error message; runing a query via APEX though is providing results but taking way too long)...
    Please advice how to make the query efficient...

    tparvaiz,
    Is it possible when building your materialized view to summarize and consolidate the data?
    Out of a million rows, what would your typical user do with that amount data if they could retrieve it readily? The answer to this question may indicate if and how to summarize the data within the materialized view.
    Jeff
    Edited by: jwellsnh on Mar 25, 2010 7:02 AM

  • Network event is taking too long (100%)

    Hi everybody. We have a 10g DB on Windows. We're using OEM to manage the DB, and it has started to show an alert about database time spend waiting for "Network" event. It arises when we execute one module that updates several tables, that is taking too long. Before we had this app on 8i, also on Windows, and that operation was much more faster than now. The indexes on tables are valid, and I've gathered statistics for the CBO, so I suppose the problem is, as the OEM says, related with network, but I don't know why, because the connection speed is the same tan before, and the two machines are in the same LAN.
    Any ideas??

    Here is the output requested:
    SQL> select * from v$system_event
    2 where event like 'SQL%';
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
    AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
    SQL*Net message to client 1159200 0 252
    0 2516408 2067390145
    SQL*Net message to dblink 2234 0 1
    0 5590 3655533736
    SQL*Net more data to client 5753 0 166
    0 1657387 554161347
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
    AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
    SQL*Net more data to dblink 12 0 0
    0 548 1958556342
    SQL*Net message from client 1159181 0 218341084
    188 2,1834E+12 1421975091
    SQL*Net more data from client 23299 0 180602
    8 1806015123 3530226808
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
    AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
    SQL*Net message from dblink 2234 0 3693
    2 36934861 4093028837
    SQL*Net more data from dblink 4021 0 39
    0 390002 1136294303
    SQL*Net break/reset to client 182986 0 2740
    0 27397165 1963888671
    9 filas seleccionadas.

  • R/3 Extraction taking too long to load data into BW

    HI There,
    I'm trying to extract SAP Standard extractor 0FI_AP_4 into BW, and its taking endless time.
    Even the Extract checker RSA3  is taking too long to execute the data. Dont know why its taking so long to execute.
    Since there in not much data to take such a long time.
    Enhanced the datasource with three fields from BSEG using user exits.
    Is that the reason why its taking too long? Does User Exit slows down the extraction process?
    What measures i should take to quicken the process?
    Thanks for your time
    Vandana

    Thanks for all you replies.
    Please go through the steps I've gone through :
    - Installed the Business Content and its in version 3.5
    - Changed the update rules, Transfer rules and migrated the datasource to BI 7
    - Enhanced the 0FI_AP_3 to include three fields BSEG table
    - Ran RSA3 and the new fields are showing but the loading is quite slow.
    - Commented the code and ran RSA3 and with little difference data is showing up
    - Removed the comments and ran, its fine, though it takes little more time then previous step...but data is showing up
    - Replicated the datasource into BW
    - Created the info package and started the init process (before this deleted the previous stored init process)
    - Data isn't loading and please see the error message below.
    Diagnosis
    The data request was a full update.  In this case, the corresponding table in the source system does not
    contain any data. System Response Info IDoc received with status 8. Procedure Check the data basis in the source system.
    - Checked the transformation between datasource 0FI_AP_4 and Infosource ZFI_AP_4
       and I DID NOT found the three fields which i enhanced from BSEG table in the 0FI_AP_4 datasource.
    - Replicated the datasource 0FI_AP_4 again, but no change.
    Now...I dont know whats happening here.
    When i check the datasource 0FI_AP_4 in RSA6, i can see the three new fields from BSEG.
    When i check RSA3, i can see the data getting populated with the three new fields from BSEG,
    When i check the fields in the datasource 0FI_AP_4 in BW, I can see the three new fields. It shows
    that the connection between BW and R/3 is fine, isn't it?
    Now...Can anyone please suggest me how to go forward from here?
    Thanks for your time
    Vandana

  • I am trying to update my ipad mini but taking too long time 5 hours

    i am trying to update my ipad mini to ios 7  but taking too long time 5 hours so what i have to do
    Message was edited by: GOPAL DHRUW

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • RMAN - upgrade catalog taking too long

    Hello ,
    I am trying to upgrade the rman catalog and it is taking too long to upgrade , infact after 4 hours wait time it is still excuting the upgrade command .
    Target database is : 11.2.0.3 PSU1
    catalog database : 11.2.0.2
    upgrading the rman catalog to 11.2.0.3 .
    I tried executing the command at a very quiet time of the day when catalog is not been used by any database . Please advice if you have encountered the similar issue and fixed it .
    Thanks
    Venkat

    After some time into execution of "upgrade catalog" i got the output as below , and after that i let all the jobs of rman execute completely from diff databases that are connected to catalog and re-executed the "upgrade catalog" command , which finally completed the upgrade process with out the issues .
    Error :
    RMAN> upgrade catalog;
    error creating upgcat_strt_0
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-06004: ORACLE error from recovery catalog database: ORA-00060: deadlock detected while waiting for resource
    Re-executed when no sessions are connected to catalog and the upgrade process is successful .
    RMAN> connect catalog rman/rman@database
    connected to recovery catalog database
    PL/SQL package RMAN.DBMS_RCVCAT version 11.02.00.02 in RCVCAT database is not cu
    PL/SQL package RMAN.DBMS_RCVMAN version 11.02.00.02 in RCVCAT database is not cu
    RMAN> upgrade catalog;
    recovery catalog owner is RMAN
    enter UPGRADE CATALOG command again to confirm catalog upgrade
    RMAN> upgrade catalog;
    recovery catalog upgraded to version 11.02.00.03
    DBMS_RCVMAN package upgraded to version 11.02.00.03
    DBMS_RCVCAT package upgraded to version 11.02.00.03
    Thanks
    Venkat

  • Elements 10 reinstall taking too long

    I've been trying to reinstall Elements as I've recently upgraded my laptop. The download says it's taking anywhere from 6 to 21 hours!! I've tried it three times on three seperate days on both Chrome and IE and it always ends with the message "the download was taking too long and was stopped by the network". When I try to restart it it restarts from scratch, making it imposssible to ever complete the download. How can I reinstall Elements? I'm downloading from Thailand, is there a special server I should be connecting to?

    What is your current Bandwidth?
    Try from Adobe.com, and use the "In-Cognito Window" (Ctrl+Shift+N) in Chrome, (When you go to www.adobe.com, Choose - UnitesStates English, if it asks you)
    Cheers
    LP

  • Update statement taking too long to execute

    Hi All,
    I'm trying to run this update statement. But its taking too long to execute.
        UPDATE ops_forecast_extract b SET position_id = (SELECT a.row_id
            FROM s_postn a
            WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME)))
            WHERE position_level = 7
            AND b.am_id IS NULL;
            SELECT COUNT(*) FROM S_POSTN;
            214665
            SELECT COUNT(*) FROM ops_forecast_extract;
            49366
    SELECT count(*)
            FROM s_postn a, ops_forecast_extract b
            WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME));
    575What could be the reason for update statement to execute so long?
    Thanks

    polasa wrote:
    Hi All,
    I'm trying to run this update statement. But its taking too long to execute.
    What could be the reason for update statement to execute so long?You haven't said what "too long" means, but a simple reason could be that the scalar subquery on "s_postn" is using a full table scan for each execution. Potentially this subquery gets executed for each row of the "ops_forecast_extract" table that satisfies your filter predicates. "Potentially" because of the cunning "filter/subquery optimization" of the Oracle runtime engine that attempts to cache the results of already executed instances of the subquery. Since the in-memory hash table that holds these cached results is of limited size, the optimization algorithm depends on the sort order of the data and could suffer from hash collisions it's unpredictable how well this optimization works in your particular case.
    You might want to check the execution plan, it should tell you at least how Oracle is going to execute the scalar subquery (it doesn't tell you anything about this "filter/subquery optimization" feature).
    Generic instructions how to generate a useful explain plan output and how to post it here follow:
    Could you please post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your statement. Please use the {noformat}[{noformat}code{noformat}]{noformat} tag before and {noformat}[{noformat}/code{noformat}]{noformat} tag after or the {noformat}{{noformat}code{noformat}}{noformat} tag before and after to enhance readability of the output provided:
    In SQL*Plus:
    SET LINESIZE 130
    EXPLAIN PLAN FOR <your statement>;
    SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Note that the package DBMS_XPLAN.DISPLAY is only available from 9i on.
    In 9i and above, if the "Predicate Information" section is missing from the DBMS_XPLAN.DISPLAY output but you get instead the message "Plan table is old version" then you need to re-create your plan table using the server side script "$ORACLE_HOME/rdbms/admin/utlxplan.sql".
    In previous versions you could run the following in SQL*Plus (on the server) instead:
    @?/rdbms/admin/utlxplsA different approach in SQL*Plus:
    SET AUTOTRACE ON EXPLAIN
    <run your statement>;will also show the execution plan.
    In order to get a better understanding where your statement spends the time you might want to turn on SQL trace as described here:
    When your query takes too long ...
    and post the "tkprof" output here, too.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Apple tv2 is taking too long to load movies

    My apple tv2 is taking too long to load movies, it displays a message saying it needs 200 minutes or more, what about you guys?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • WRT54GS2 - Page taking too long to load?

    Recently our Internet Service Provider turned our internet back on. About a day or two after using the internet, I've been noticing problems with slow internet connection. At times it will load fast, and other times it'll take a little bit too long to load.
    For example, I had a couple tabs open this morning and tried to get on a website in a different tab. The page was taking so long to load that it gave up and I got the message "Unable to connect to the Internet".
    But I have internet. 
    On my taskbar, there's an icon in the bottom right corner showing that I have internet connection. 
    Other times I'll try to load a page and it's just blank, and in the corner of the page's tab, there's just an icon of a white sheet of paper followed by the web title.
    How come some pages are taking too long to load and others are loading just fine?
    Additional detail if it helps:
    I unplugged the power cord from my router and plugged it back in to try and fix it and that didn't work.
    My second and third attempt, I refreshed my router. Still nothing.
    Also, I have a secure network, password protected.
    There have been no severe storms recently that could have messed with the router.
    What can I do to fix this issue of a slow loading page?

     Hi ashtonlevry, it looks like your router has a messed  up settings right now. That could be because you had it on stand by for a while since you said that your ISP has just turned your connection back on.
    It's actually best for you to just reset the device back to the default settings and reinstall it afterwards.
    To do the proper reset :
    1. Press and hold the reset button at the back of the router for 30 seconds while the device is on.
    2. Release the button and unplug or power off the device.
     Once done, reinstall the settings.
     For Cable connection, check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
    For DSL connection, here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...
    To set up the wireless connection,  here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=2bf7dc19b4a94d03b0fd91f9ce426e8a_Manually_Setting_...
    Hope these steps help.

  • Discoverer report taking too long time to open.

    HI,
    Discovere reports are taking too long time to open. Please help to resolve this.
    Regards,
    Bhatia

    What is the Dicoverer and the Application release?
    Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
    Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
    Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
    Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
    Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
    Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
    Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
    Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1

  • Taking too long time to get LOV

    HI,
    I have created a customer folder in which the query retuns 0.5 million records.
    I have created a item class in airline_name column which is being used in the worksheet as parameter.
    The problem is it is taking too long time near about 2 min to get LOV when the user wants to search the exact name.
    Thanks,
    Himanshu Tiwari

    Hi,
    Usually, you should not use the folder that the report is based on to define the LOV. You should use a separate folder to define the LOV that is optimised to return the content of the LOV.
    Rod West

Maybe you are looking for