SMS Related Issues of E series Devices

Hi
Nokian 
Want to ask you some question 
 I am using Nokia E63
1) How to copy sms from memory card to phone memory Note i have already transferred messages from phone memory to Memory Card but now want to again change the memory to phone memory but it is not happening also i have deleted all messages from phone memory)
2) Which memory is safe to keep messages and why?Remember i receives lot of sms want doesn't want to deleted a single message and also want to tranfer it to new phone whenever i change my phone
Thanks in advance

The E71 I have is using mail for exchange, and I can get two days running out of it no problems.
What Psychomania is saying is very much true, setting the heartbeat will offer some battery advantages, I would also suggest that if an E71 battery does not last six hours, then it is drawing around 250mA per hour, 0.92watts per hour, that for a handset of this type is an excessive power draw, which would certainly cause the device to warm up, if not at least the battery would be getting warm.
This would suggest that there is something not correct with the handsets operation, if applications are being left on, or if other services are running in the handset, additionally low or weak signal in primary areas of use will cause the battery to be consumed at a considerably faster rate, it might be worth checking different network operators, who may offer better signal power in places where your users are going to be.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • SMS Delivery Issues

    I am having a number of issues receiving SMS messages sent as emails from a service my company offers. A number of our customers are complaining that they no longer can receive SMS notifications on their Verizon wireless devices. As a Verizon customer I recently tested as well and sure enough, the messages do not get delivered.
    After doing some research, it is very clear that Verizon's mail servers are refusing to talk our outbound mail server. This is new behavior and we need it rectified. Unfortunately, trying to reach out to Verizon Customer Service via twitter has yielded silly questions about what device I am using.
    Please help.

    And here's the logs. I shortened my phone number to 214
    Jul 28 09:44:34 dewars postfix/cleanup[28373]: 53D3518944: message-id=<519272406.1805.1406558677279.JavaMail.flytecomm@govmessenger2.flytecomm.com>
    Jul 28 09:44:34 dewars postfix/qmgr[4323]: 53D3518944: from=<[email protected]>, size=650, nrcpt=1 (queue active)
    Jul 28 09:44:34 dewars postfix/smtpd[28369]: disconnect from unknown[192.168.138.71]
    Jul 28 09:44:34 dewars postfix/error[28425]: 53D3518944: to=<[email protected]>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=4.0.0, status=deferred (delivery temporarily suspended: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp10.vtext.com)
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: D14E518946: client=govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/cleanup[28373]: D14E518946: message-id=<88277747.1806.1406558717794.JavaMail.flytecomm@govmessenger2.flytecomm.com>
    Jul 28 09:45:14 dewars postfix/qmgr[4323]: D14E518946: from=<[email protected]>, size=669, nrcpt=1 (queue active)
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: D6D5918947: client=govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/cleanup[28373]: D6D5918947: message-id=<763050748.1807.1406558717816.JavaMail.flytecomm@govmessenger2.flytecomm.com>
    Jul 28 09:45:14 dewars postfix/qmgr[4323]: D6D5918947: from=<[email protected]>, size=628, nrcpt=1 (queue active)
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: DBDC718948: client=govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:14 dewars postfix/cleanup[28373]: DBDC718948: message-id=<630718322.1808.1406558717837.JavaMail.flytecomm@govmessenger2.flytecomm.com>
    Jul 28 09:45:14 dewars postfix/qmgr[4323]: DBDC718948: from=<[email protected]>, size=628, nrcpt=1 (queue active)
    Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
    Jul 28 09:45:15 dewars postfix/smtp[28550]: D6D5918947: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp3.vtext.com
    Jul 28 09:45:35 dewars postfix/smtp[28549]: D14E518946: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp3.vtext.com

  • Can we set up a forum for Security related issues?

    I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
    Thanks!

    I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
    It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
    I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
    Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
    I am not aware of any other forums that deal with OS X security issues
    exclusively, so this forum could be a good place to bookmark and visit from time to time.

  • To everyone with IOS6 Sound related issues & Others

    If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
    After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
    When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

    Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
    I am on the phone with apple care now. They seem to not be aware of the problem at all.
    While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

  • Many Sporadic Preview Related Issues

    Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
    Preview panel "preview" freezes indefinitely.
    App very slow to load while creating new previews. (previews take forever to create and update)
    Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
    This one is a little different...
    Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
    This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
    I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
    Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

    This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
    The official forum for reporting bugs and making feature requests is at the web link below.
    http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Unicode related issue in 4.6c to ECC 6.0 upgrade

    Hi
    I am doing upgrade from 4.6c to ECC 6.
    Here I am getting one unicode related issue.
    "The data object A948 does not have a component called ZZMATWA.".
    This type of issues , how can I resolve.
    I am very new to upgrade, Plese do help me.
    Regards
    Sandeep Reddy.

    Hi,
    Can you give the error what you are coming across.
    Regards,
    Suhas

  • How to add data in related issue field in issue tracking list sharepoint 2013

    Hi,
    I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

    Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • In PP Interface related issues the role of functional consultant

    In PP Interface related issues what is the role of functional consultant .  what is the approach steps to analyse and resolve the issues  in XI, interface, idoc, etc.,

    For issues relating to interfaces, a functional person would need to diagnose what is causing the issue & thereby informing the technical person where to fix it, if the issue is due to system setup.
    As regards to the steps, I just wish there was a manual which read something like
    10 steps on how to analyze....
    unfortunately there is none that I have come across or even if one is ever written on those lines will be very specific, so not much of use for your need. A good approach would be to have a clear understanding of what the interface is supposed to do, which would assist you in fixing the issues.

  • How to Handle BARCODE related issues in WebDynpro ABAP

    Hi All,
    How to handle barcode related issues in WDA?
    is it possible in WDA or not?
    please provide information or any links related..
    Thanks,
    raj.

    Hi ,
    You just need to install the software comes with the barcode scanner in the local PC and while reading you have to put the cursor on the field like inputfield . a barcode when interpreted by scanner is nothing but alphanumeric words.
    Regards
    Yash

  • Performane related issue in Production Server

    Hi,
    when i deploy the whole application in development server (by remotely logging into client server through vpn) it works fine .
    But when it is run at client side for system testing, user acceptance testing and
    integration testing it becomes very slow .
    Due to this performance related issue , we are not able to transfer the DCs to production server .
    We are sure it is not coming from R3 side (BAPIs etc) . It is coming either from the Webdynpro or Portal side .
    Can anybody help out regarding how to solve this issue .
    Thanks .

    Hi Narendra,
    Please elaborate what is QAS customization and production  customization.
    TR has been done properly.
    Let me give you an overview of the project.
    In Organisational Assignment a Zprogram has been written which captures additional information like Grade Code, Designation Code & Pay Sheet Code
    Its a govt. client. Combination of Grade Code & Designation Code is Pay Scale Grouping
    e.g if Grade Code is A01 & Designation Code is A005
    Pay Scale Grouping is A01-A005
    If we put the values in 0001(Org Assignment) for Grade Code(A01) & Designation Code(A005), A01-A005 comes automatically in Pay Scale Grouping for a particular Pay Scale Structure.
    But now the problem is Pay Scale Type doesn't come get defaulted in 0008 for a Personnel Area & Personnel Subarea.
    I have maintained PST in Tariff & Check Assignment of Pay Scale Structure in Enterprise Structure.
    But in 0008, We have to put PST manually. Since client is having only 1 Pay Scale Area for all Personnel Area & Personnel Subarea, so we don't have to bother for it
    Please tell me where can be the error
    Regards,
    Usha

  • System relate issue

    Hi friends,
    im in guess of where to post system related issue, since this is my problem
    run --> drivers --> host file,
    i couldnt able to edit & save host file.
    Tried below steps:
    1. host --> properties --> Security --> add --> everyone --> given full control also.
    2. Not able to do that in administrator account alsoWhich is the right place to post this question.
    Regards,
    Saro
    Edited by: Saro on May 17, 2011 12:48 PM

    Hi,
    Probably in your OS provider support forum?
    Regards,
    Jari

  • Oracle DBA related issues ?????

    where can i discuss DBA related issues?
    thanks

    The standard tasks necessary for the SAP system are supposed to be done via the brtools which can be triggered from within the SAP system if needed.
    The reason for this is that SAP does not use all of Oracle's functionalities (some may be even harming the SAP system). Therefore SAP recommends to administer the db only via the brtools to allow a safe administration taking into account the special requirements of the SAP system.
    If you need to know more about the functionality of the brtools I suggest you use help.sap.com or use the SDN information given.
    Kind regards,

  • Security related issues

    Hi everybody,
    We know that weblogic stores all its configuration
    parameters in an xml file,including the userid and password for the database
    in clear text form .
    I want to know whether it is a security flaw?
    Is there a way to encrypt the file contents,so that the userid and password
    will not be in clear text form.
    Any suggestions to increase the security on the config file by appliying os
    restriction or by any third party tool will be helpful.
    Thanks in advance
    prashant

    I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
    It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
    I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
    Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
    I am not aware of any other forums that deal with OS X security issues
    exclusively, so this forum could be a good place to bookmark and visit from time to time.

Maybe you are looking for