SMTP Banner mismatch - still not understanding how this works?

I have a new Exchange 2010 install.
My outgoing email is getting flagged as spam. MX Record test shows SMTP banner mismatch.
I understand that you don't change the FQDN on the receive connector using the GUI.
I have created an additional Receive connector so I have the following:
Receive Connectors:
Client Comm
Default Comm
My question is how to I change the smtp banner and which connector do I set it on. The syntax needed for the Set-ReceiveConnector is kicking my butt.
It sure is frustrating that the new Windows World is so centered around Powershell command lines. Very frustrating and backwards technology.
The documentation on the Set and Get-Receiveconnectors is very poorly written. IMHO.

My reverse DNS is setup correctly.
This is an issue with the receive connector banner page. Some email hosting services, AOL, Hotmail etc. are flagging my outbound email as junk. So they must be doing a test to see that my receive connectors have the wrong SMTP banner.
My send connector is ALSO setup correctly.
I need help with the syntax in using the Set-receiveconnector cmd.
Follow:
http://technet.microsoft.com/en-us/library/bb125159(v=exchg.141).aspx
Create a Internet type custom receive connector. My assumption is that you receive internet messages directly to the hubs. When you create an Internet Receive Connector it will allow anonymous senders to connect to it so it will work for internet messages.
In the Specify the FQDN this connector will provide in response to HELO or EHLO field, type the name advertised in response to the SMTP HELO or EHLO verb. If you leave this field blank, the fully qualified domain name (FQDN) of the Hub
Transport server or Edge Transport server is automatically added when the connector is created
Twitter!:

Similar Messages

Not understanding how Wifi Works

Good morning all, so I'm not understanding how Wifi works on the 3GS. It seems to behave differently then on the 3G. If I send a video to some one and hit the sleep awake button it never goes through. It seems to only send it if I keep the screen active, and I'm not understanding how keeping wifi on drains the battery if everytime I hit the sleep button it disconnects it. It's kind of annoying, because before you could shoot off an email and it would go right through. I have noticed though that if it's on 3G it does go through. Has any one else noticed this? Thanks!

I notice sometimes when I am connected to WiFi that after I wake up the phone it takes a couple seconds to reconnect to WiFi so it does seem like the phone turns the WiFi off at some point while sleeping or at least goes into some sort of standby maybe. I don't think I have had an issue of it turning off after you hit sleep until it was done sending though. I would think that if the WiFi does turn off while asleep that it would have a sleep time after a certain amount of inactive time and not the second the screen is off.
I'm interested in finding this out as well. I havent had this issue but I do send a lot of large attachments and may need to know this for future reference.
Message was edited by: Ray Golob

How much does this cost? & I still can't understand how this work

How much does this cost? & I still can't understand how this work

Hello mkopti,
ePrint is a free feature include on most of our wireless printers that are e-all-in-one enabled. It allows you to register your printer on HP's website http://www.eprintcenter.com and create an account. Once an account has been created you can enable the web services feature, after connecting to a valid network with internet access, which will print off a registration code you can use to add the printer to your account and customize an email address for the printer. This allows you to print to the printer from virtually anywhere simply by sending an email to the printers email address and when it is received it will print.
Most of these printers are also Airprint enabled meaning you can print locally from the same network on the iPad, iPod, and iPhone (version 4.3.2 and higher) by using the built in "Print" command in the idevices.
If you have any other questions or need clarification feel free to reply to this post and I will try to answer any questions you have.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I really dont understand how this works

alright first off this isnt for a school assignment so please dont feel guilty about "giving it away"
alright so this has to do with something called gridworld, if you ever seen it you know what it is, if you havents its basiclly a java built world that has bugs, rocks, flowers, and other things.
(here is a video showing the basics of gridworld http://www.youtube.com/watch?v=ZnWGOT5Bd2E&feature=related). i program in JCreator btw not greenfoot.
alright getting to the point i have the code for a bug someone build called a "chameleoncritter". what the bug does is change colors depending on what it is next to, so if it is next to a pink rock it changes pink, ive been reading the code and can honestly not figure out how this method changes its color depending on what it is next to. here is the code
* AP(r) Computer Science GridWorld Case Study:
* Copyright(c) 2005-2006 Cay S. Horstmann (http://horstmann.com)
* This code is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
* This code is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* @author Chris Nevison
* @author Barbara Cloud Wells
* @author Cay Horstmann
import info.gridworld.actor.Actor;
import info.gridworld.actor.Critter;
import info.gridworld.grid.Location;
import java.util.ArrayList;
* A <code>ChameleonCritter</code> takes on the color of neighboring actors as
* it moves through the grid. <br />
* The implementation of this class is testable on the AP CS A and AB exams.
public class ChameleonCritter extends Critter
     * Randomly selects a neighbor and changes this critter's color to be the
     * same as that neighbor's. If there are no neighbors, no action is taken.
    public void processActors(ArrayList<Actor> actors)
        int n = actors.size();
        if (n == 0)
            return;
        int r = (int) (Math.random() * n);
        System.out.println(n);
        Actor other = actors.get(r);
        setColor(other.getColor());
     * Turns towards the new location as it moves.
    public void makeMove(Location loc)
        setDirection(getLocation().getDirectionToward(loc));
        super.makeMove(loc);
}if anyone can explain to me how this works it would be excellent.
one more thing, here is a link to the gridworld api (list every method and class and its function).
http://www.horstmann.com/gridworld/javadoc/
Edited by: vouslavous on Apr 17, 2009 8:51 PM

public void processActors(ArrayList<Actor> actors)
        int n = actors.size();
        if (n == 0)
            return;
        int r = (int) (Math.random() * n);
        System.out.println(n);
        Actor other = actors.get(r);
        setColor(other.getColor());
}Randomly selects a neighbor and changes this critter's color to be the same as that neighbor's. If there are no neighbors, no action is taken.
Mel

I need help understanding how this works. AS 2.0

Its my first time here and i only started learning flash today. I aint too great with maths and i was showed this piece of code that makes a triangles point follow the cursor. It involved mathimatical things ( which i aint so great at) and the guy said "You dont need to know how it works, just how to use it." well i copied his code and it worked, but i have no idea how to use it in other rotation apart from the one he taught us. I dont even understand how to redo his code i saved it to a word document and anytime i wanted to make something rotate something in that fashion i would refer to that. But i dont want to have to do that, i want to know how to use it, dont have to understand it, but use it for other rotation matters. If you are going to help, please try to be a bit simmple i explaining it, cause im new. Dont get me wrong i aint thick but i can find it a bit hard to follow some things, that is i my current problem.
here is the rotation code:
onEnterFrame = function()
hero._rotation = getmouse(hero);
getmouse = function(mc:MovieClip):Number
dy = _ymouse-mc._y;
dx = _xmouse-mc._x;
rad = Math.atan2(dy,dx);
rotate = rad*180/Math.PI
return rotate+90
also if it helps, here is the video i was watching: http://www.youtube.com/watch?v=w3OfrpbNhHs
please if you can, explain how the entire thing works.
thanks for any help given in advance.

Hi,
Here's a short primer. It may not be sufficient but here goes.
1st, move the closing bracket at the end and put it on the third line. This makes the code more efficient
onEnterFrame = function(){                               // this causes Flash to repeatedly
                                                                          execute the next line at the
                                                                          frame rate you selected
                                                                          for your document
       hero._rotation = getmouse(hero);               // this tells Flash to rotate a
                                                                          movie clip (named hero) based
                                                                          on the function getmouse()
};                                                                     // putting the }; here makes the
                                                                          code more efficient and readable
getmouse = function(mc:MovieClip):Number{   // This is the function called with
                                                                         mc referring to hero that was
                                                                         passed from the second line.
     dy = _ymouse-mc._y;                                // dy means delta y which subtracts
                                                                        the y position of the movieclip
                                                                        from the mouses y position
     dx = _xmouse-mc._x;                               // dx = delta x (same as above line
                                                                        but on the x axis)
                                                                     // once you have the x and y sides
                                                                        you male a triangle.
                                                                        Now use trig to find the angle
     rad = Math.atan2(dy,dx);                           // the computer works in radians
                                                                        the arc tangent atan2 will give the
                                                                        angle in radians
     rotate = rad*180/Math.PI                            // you want to convert the radians to
                                                                        degrees, that's what this line does
     return rotate+90                                         // this returns the value of rotate back
                                                                        to the calling function in line 2.
                                                                        the +90 determines which part
                                                                    // of the hero movie clip is facing the
                                                                       mouse.
If you put the mouse cursor over any of the green reserved words above in the Actions panel you will get a desctription of what these do.
hope that helps.

[ SOLVED ] Still not understanding how to reinstall Grub ?

Hi All
I currently have a dual boot windows 7 & Arch system and i have to wipe the Windows partition and reinstall. But i am still confused as to how to reinstall Grub once i have reinstalled windows 7. The wiki post is not longer available and have not found anything that explains what i need to do ... So can anyone point me in the right direction or explain what i need to do ?
Many Thanks
Last edited by whitetimer (2011-01-03 15:48:49)

# FLAWLESS GRUB REINSTALL GUIDE BY DARKBEANIES ASSUMING YOU USE EXT3 FILESYSTEM
# Boot arch install cd and login as root, and type the following commands in order, replacing X and Y values with the number of the partition/disk(MAKE SURE YOU GET THIS RIGHT, ASK IF YOU DON'T KNOW)
cd /
mount -t ext3 /dev/sdaX /mnt
mount -t proc proc /mnt/proc
mount -t sysfs sys /mnt/sys
mount -o bind /dev /mnt/dev
chroot /mnt /bin/bash
#IMPORTANT-ONLY IF YOU HAVE SEPARATE BOOT PARTITION
mount -t ext3 /dev/sdaX /boot
#Then try:
grub-install /dev/sdaX
# -WHEN- this fails type this:
grub
root (hdY,X)
setup (hdY)
#Then reboot:
cd /
umount -a
exit
cd /
umount -a
reboot
#That's it!
Why oh why was this page removed from the wiki I do not know...
Live CDs of various flavours available HERE: (Don't you have the CD or whatever you used to install to begin with?)
http://www.archlinux.org/download/
Last edited by darkbeanies (2011-01-02 17:24:55)

Transitions still screwy. Can somebody help me understand how this works?

I'm struggling to understand why my transitions and/or titles aren't working right when exporting.
On the video I'm currently putting together I'm using the scrapbook theme.
When I preview the video it looks perfect but when I export it I get this:
During the yellow "title" sequences, the video is supposed to be running inside a "photo frame" graphic and then at the last 1/2 second or so zoom right into the remainder of the video. What happens instead is that the video gets to the point where the title graphic is supposed to zoom gracefully into the video and instead it just cuts right to the video. The inverse happens at the beginning of the title sequence as well.
I have two links that illustrate this. One is a screenshot of the section of the project in question and the other is a video of the preview with the quicktime .mov running underneath it.
Sorry for the crappy quality of the video with the watermark. It's clearly not worth the price their asking to get rid of the watermark since it's nowhere near that jerky on my screen.
Any help you can give me would be great. This is happening on almost all these titles in this project and has happened a lot in the past.
http://www.mvlawn.com/screenshot/Screen%20shot%202009-11-16%20at%206.25.36%20PM. png
http://www.mvlawn.com/screenshot/iShowU-Capture.mov
(Ignore the exclamation triangles, I didn't have my external drive plugged in when I took the screenshot)
THANKS!!
Message was edited by: Kevin Berube

One thing to keep in mind is that when you have a transition (it looks like you are using Fade Through Black), it takes half the frames from the preceding clip and half the frames from the following clip. Si if you have a 1/2 second fade through black, it needs 8 frames from the preceeding clip and 8 frames from the following clip.
But you have the photo album title also contending for those same eight frames.
I think you would get better results if you either
1) removed the fade through black transition, or
2) moved the start of the title to the right so that it started on the 9th frame or later.

Help understand how this works

Hows everyone doing, i need some help understand this. This is my first time using Lulu. From the reviews i'v read about it they tell me this is the #1 place to come to to get my books printed. Here the question, i have all 3 of my books ready to be uploaded do i just sent that in, then they send me the prints ? or so they self them for me. Sorry if this seems like a dumb question, but its my first time using this particular site.

Here's a quick overview:
You start the new book wizard. Click "Create," pick a book type and size (hardcover, paperback, etc.; 6x9, 8.5 x 11, etc.), and click "Make this book."
Hint: If you want the widest distribution for your book, pick a size / type that has a green checkmark next to it.
The wizard will guide you to name your book, apply an ISBN (or get a free one), upload your contents, and upload your cover or design a cover. It will guide you to set pricing and distribution, and many other options.
When you've done all that, your book will be available to order. You will see two prices: the one you pay, and the one other people pay. The one you pay is the printing cost per book. It may be anywhere from $2.50 to $20.00 or more, depending on options you pick -- probably coser to the low end.
On that first page, where it says "Create," there is a calculator that will figure roughly what your book will cost (printing costs), so you can plan your options around that calculator.
So you order as many books as you want, pick shipping, pay with a credit card, and in a few days, the books are on your doorstep.
I hope that helps.

Umm not sure how this works.. how do I transfer wirelessly to other devices

How do I start transferring things wirelessly

you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Her contacts would be wherever she put them
The iphone is designed to be synced to your computer or cloud service regularly. If she failed to do this, then they are likely gone.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

Hello Sabroso007
Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Regards,
-Norm G.

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

HT201250 I do not understand how to restore my entire iTunes music library with Playlists and all?

I do not understand how to restore my iTunes library inlcuding Playlists and all? In clearing out an older Powerbook I had not signed out of MobileMe when clearing iTunes. That deleted many songs and Playlists on the iMac and iPhone. Help is appreciated.

And yes, I have a 500G external HD so I know the data is in there.

IPhoto deleted my photos. I'm not sure how this happened, but how do I recover them?

iPhoto deleted photos I took that I do need. I'm not sure how this happened but they are now no longer anywhere on my Mac. How did I get them back?

With that amount of information to work with, the only possible suggestion is that you restore from your back up.
Regards
TD

HT4759 i'm trying to access my new icloud email acct from my mac. I have OS X 10.6.8 and have just completed a software update. But still not seeing how to install my icloud email...?

i'm trying to access my new icloud email acct from my mac. I have OS 10.6.8 and have just completed a software update. But still not seeing how to install my icloud acct...?

You must upgrade your OSX to Lion (10.7) minimum, Mavericks (10.9) preferably.

SMTP Banner mismatch - still not understanding how this works?

Similar Messages

Maybe you are looking for