SMTP Send mail

Hi everybody
I have a little trouble about send mail´s.
I have got Lotus Notes Server and
I can send diferents emails wiht PL/SQL, but I can´t see the subject.
anybdoy know about of this trouble?
Thanks.

see the example procedure here i am using for lotunnotes it is working fine
create or replace procedure send_mail(sender in varchar2,
recipicent in varchar2,
subject in varchar2,
message in varchar2) is
mail_conn utl_smtp.connection;
begin
mail_conn := utl_smtp.open_connection('mail ip ex 130.0.25.200');
utl_smtp.helo(mail_conn, 'tpc.tatasteel.com');
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipicent);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'From:' || Sender || utl_tcp.CRLF);
utl_smtp.write_data(mail_conn, 'To:' || recipicent || utl_tcp.CRLF);
utl_smtp.write_data(mail_conn, 'Subject :' || subject || utl_tcp.CRLF);
utl_smtp.write_data(mail_conn, utl_tcp.CRLF);
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(mail_conn);
raise_application_error(-20000,
'Failed to send mail due to the following error: ' ||
sqlerrm);
end send_mail;
if any problem send to [email protected]

Similar Messages

SMTP send mail message

SMTP send mail message is giving 'unkown mime version' error(error code 16500). The same mail server works when sending by Netscape mail.Any help greatly appreciated.

Hi,
There seem to be a bug in the OGIC_POP.llb\OGIC_POP_ListMessages.vi.
Or at least it needs customization to process the response from each mail server. If you open the diagram for this VI, you'll see that it is using the "+OK\s" regular expression to reach the end of the string before the msg-number, msg-size list. In your case, this string is "+OK 5 messages (6190 octets)"
You need to modify the diagram to skip this whole string. One easy way would be to use just "+OK" with the first Match Pattern fuinction and then use an "\r\n" and pass this to the true-case.
I am attaching a screenshot of this. And I have tested this to work fine -- I get the messages in the array.
Hope this helps,
Khalid
Attachments:
modified_pop_listmsgs.bmp ‏1083 KB

Mail not received sent through SMTP Send Mail Task

Hi,
I have a SSIS package which will send mail notifications. This package is deployed on Integration Services Catalogues as Project deployment. This package having a list of notifications regarding the task status.The receiver end got few
notifications but missed of the notifications. This issue is not frequent. Sometimes we are getting all notifications. Sotimes missing some notification. All these using SMTP tasks with same SMTP connection.
I checked the task status in Standard Reports for all Executions. The task status for all these notification tasks are Success.
What are the possible reasons for this?
Thanks and regards,
Muhammed Shakeer
Muhammed Shakeer

Hi Muhammed,
If the issue happens sometime only and all executions was run successfully, then the issue should be caused by the SMTP server. The SMTP server may refuse the connections.
To verify the cause, please:
Check SMTP server log
Enable logging for the SMTP task. Check the log after execution
To understand how to enable Logging, please see:
http://technet.microsoft.com/en-us/library/ms181205(v=sql.110).aspx
Thanks,
Jinchun Chen

SMTP Send Mail - too many authenticated connection...

Using Outlook on a MAC, and within this last week I have started to get this error when sending mail. I have read all the forum posts and help documents on this issue and ensured that my settings are as described and yet I am still having this problem.
Should I be switching to IMAP to avoid this problem, and if so how do I do that without losing all my SMTP downloaded email?
Thanks for any insight - it is causing me real issues now as I'm job hunting and can't reply to job emails!!!!

Yes same problem for me. In the last three days, or so, I will get the random "too many authenticated connections" message. I have just phoned BT twice this afternoon and had great trouble understanding both Indian guys. One suggested he's fixed it by adjusting things at BT to accept "S Client Mail", whatever that means! That however didn't fix it. The second suggested I needed to reset password (easy option that one), until I pointed out that I am having no trouble with password use on the BT webmail page or through my phone. He then said I'd have to reload Outlook to solve the problem. Yeah right, like I'm gonna loose all my emails, settings and calendar to satisfy his theory of "if it doesn't work then reload it". There is clearly a server problem somewhere and OH, how I would love to speak to someone, (anyone), at BT who actually knows what they are talking about from a network/server angle. Anyone worth their salary in networks could trace my activity online and find out what was going on and why it was failing.
Setting POP3 and all others checked by BT as being correct.

Smtp - sending mail issues

Bought a new Macbook Pro and have a home wireless connection (Orange). Can send and receive email (Pipex is my office ISP). Had to change smtp setting to Orange's in order to send mail.
Problem: I intend to use my MacBook at various locations and have successfully logged into several wireless connections. Web browsing and receiving email no problem. Sending email never works other than at home?
I cannot beleieve that I have to change smtp settings for every network I connect to in order to send email - It will be impossible.
Pipex and Orange are not interested and offer no help at all. Help please.
Not a .Mac user.
MacBook Pro Mac OS X (10.4.9)
MacBook Pro Mac OS X (10.4.9)

Most networks block sending mail on port 25, except for their own customers.
Ask Orange or Pipex (or google for it) if they have an alternate smtp port (like 587) that works instead of port 25.

Sending mail from Ouloook (does not arrived to internal users)

I have on machine that does not have GW client, but has only Outlook
It is only used for SMTP sending mails via GWIA
It works fine to external sources, but to internal ones it only works for
some users, for majority it does not work
It probably it is something with access control (can not understand how &
why)
Can see in the log that the mail being send, but it never arrives in
internal user (same domain) mailbox
No error visible
Seb

Well done! It was in fact 100% right
My stupid user blocklisted our domain!
Seb
"Massimo Rosen" <[email protected]> wrote in message
news:JCfgq.5080$[email protected]..
> On 27.09.2011 10:11, Sebastian Cerazy wrote:
>> I have on machine that does not have GW client, but has only Outlook
>>
>> It is only used for SMTP sending mails via GWIA
>>
>> It works fine to external sources, but to internal ones it only works for
>> some users, for majority it does not work
>>
>> It probably it is something with access control (can not understand how&
>> why)
>>
>> Can see in the log that the mail being send, but it never arrives in
>> internal user (same domain) mailbox
>>
>> No error visible
>
> 99,5% the receiving users junk- or blocklist.
>
> CU,
> --
> Massimo Rosen
> Novell Knowledge Partner
> No emails please!
> http://www.cfc-it.de

CANNOT SEND MAIL FROM .MAC SMTP ACCOUNT

Hello everyone--
I can receive mail from my .mac account and have done extensive troubleshooting including:
1. Changing ports from 25 to 587
2. Deleting and re-installing mailbox
3. Reading a hosts of topics
4. I have the serving settings with SSL unchecked
...but this still giving me the same trouble. I cannot send out because my email address keeps getting rejected.
Any suggestions? Thanks!

Are you also accessing an email account and SMTP server in Mail that is provided by your ISP used for connecting to the internet?
If so, can you send mail with this account and SMTP server?
If the answer is yes to both questions, select/use your ISP's SMTP server to send mail with your .Mac account which is invisible to all recipients.
Most, if not all ISPs now block the use of SMTP servers outside of their network on Port 25. Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac SMTP server) that is outside of their network on Port 25 but some block its use regardless.
Changing the Port for the SMTP server that is outside of the ISP's network from 25 to 587 usually resolves it but sometimes not depending on the ISP's restriction.
Have you contacted your ISP regarding their restrictions and/or requirements when using an SMTP server that is outside of their network or not provided by them?
Using your ISP's SMTP server to send mail with your .Mac account should work and it may be required regardless.

Can't send mail with powerbook G4, mail.app, mac OS 10.5.8 and verizon smtp server.

We just made the switch to Verizon.
Setting up Mail.app with my relatively new MacBook Pro (and OS 10.8.4) was very smooth.
Not so with my wife's old PowerBook G4 running 10.5.8, which she inherited from my daughter.
It seems to set up fine, using the same settings for the servers as on the MBP (it has to be done manually), but it is unable to send mail (via the verizon smtp server). The Connection Doctor thing does not have any trouble finding the servers and connecting.
I get the "The sender address [email protected] was rejected by the server smtp.verizon.net." message.
These settings work when sending email from this verizon account from her iphone, or from my MBP.
I successfully set up my .me email account on the G4 and that was able to send mail.
Couldn't find anything online to shed light on this. Any help would be appreciated. Thanks

Your asking peers here.
You didn't say which settings you were trying to use. Lots of people are posting about switching over to the latest EMAIL settings which include pop.verizon.net and smtp.verizon.net as the servers. However it has invariably been a mistake they are making or a special requirement of there DEVICE such as a shutdown and restart.
You should take a look at http://verizon.com/emailsettings . There are both the manual settings and some automatic trouble shooters that may be able to setup your device.

B2B Inbound Error - sender mail adapter - SMTP

Boa tarde
Estou tendo um erro quando tento ler uma caixa de e-mail via scenario B2B inbound utilizando sender adapter mail (SMTP)
estou passando as seguintes informações no adapter sender :
Transport Protocol: POP3
Message Protocol: XIPAYLOAD
URL :smtp://sepcsawi003.xxxx.xxx.
Authentication Method : Plain
USER : monit.nfe
SENHA : XXXXX
Poll interval(Min) : 1
Keep Attachments : X
namespace : http://sap.com/xi/NFE/005a
interface name : NFB2B_procNFe_OB
Segue o log extraido do comuncation Channel Monitoring :
In the Last 20 Minutes Server 0 70_34165 not initialized
Na sxmb_moni não aparece nada.
Essa configuração está correta para uso de SMTP com sender mail adapter?
Entrei na máquina do PI e executei o comando telnet sepcsawi003 25 para acessar o servidor de email.
Recebi o retorno:
Connecting To sepcsawi003...Could not open connection to the host, on port 25: Connect failed
Meu administrador me disse que as máquina PI e Email estão se conectando.
Vocês podem me ajudar?
Abs,
Sérgio Salomã

Boa Tarde
Lembrando
se for Pop3 a vc tem que ter acesso a porta 110 e IMAP4 143 se não me engano por padrão
de uma olhada nesse link
http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario
não esqueça no adapter sender mail
na aba module
Processing Sequence
1 localejbs/AF_Modules/PayloadSwapBean | Local Enterprise Bean | 1
2 localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean | Local Enterprise Bean | mail
Module Configuration
1 | swap.keyName | Content-Disposition
1 | swap.keyName | Content-Description
1 | swap.keyValue | attachment; filename="MailAttachment-1.xml"
1 | swap.keyValue | MailAttachment-1
Att
Ronaldo de Moraes

I have suddenly got the following message An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has se

Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?

Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures.

An error occured while sending mail: SMTP server error. The server responded: (null)

I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.

It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page.

Sending mail smtp vs exchange without outlook mailbox opened

We have an application published via Citrix Xenapp 6.5 on win2k8r2 servers which uses server-side Outlook for composing/sending mail. The user does a one time setup of the Outlook profile through a Citrix published Outlook.exe. After the setup
their Outlook profile is then retained in their Citrix/roaming profile and Citrix published Outlook.exe is no longer opened directly. When the user clicks an 'email' button in the application, an Outlook send/compose window from the server appears with
the contents attached and ready to be mailed. Up until now employees were using Exchange mailboxes and this functioned perfectly. Hit 'send' on that compose window and the message would get sent. We are now migrating most mailboxes
to IMAP and have found that in order for the Citrix Outlook instance to be able to send its mail via SMTP, a server-side session of the Outlook.exe mailbox has to actually be opened and not just the compose window otherwise the messages appear to send but
are actually just sitting in the outbox. No errors. Once Outlook mailbox is opened, the messages get sent out. We dont want users to have to open up a separate Citrix Outlook instance as this creates confusion with their usual client-side
Outlook and it's unwanted for limited resources in Citrix sessions to go towards sync'ing mailboxes. Seeing the same behavior with Outlook 2007 sp1 and Outlook 2013 sp1 x86. Why would this work with Exchange but not SMTP and can anyone suggest
workarounds?
I'm not knowledgeable with vbs/vba but i was considering whether it's possible to launch outlook hidden from the user or to script initiation of send/recv session on the mailbox at scheduled intervals without outlook open, thinking that might send what's
in the outbox. these are some areas i've looked into but havent gotten results yet -
Email remains in the Outbox when the StrictAccountOrder registry value is non-zero
The mysterious Outlook Outbox
Launch Outlook Hidden
Force outlook to "Send/Receive All" using VBA
http://discussions.citrix.com/topic/332666-need-workaround-for-running-an-old-application-as-a-published-app/
Thanks

When you use a SMTP server, you need Outlook open to send mail - the spooler has to have time to load and send the message. When you use Exchange, outlook hands the message off to exchange and exchange sends it.
It's not possible to launch outlook hidden using a different profile - you can only use one profile at a time. There is a utility called ExtraOutlook that can open two profiles that might work for you - most people say it works, but AFAIK, it won't open
the second profile in a hidden state.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Unable to send mail via Secure SMTP

Our email system allows users access to their accounts via secure IMAP and SMTP.
I am able to connect and view my inbox via secure IMAP, using a number of different S60 devices - namely E72, E52 and 5800.
However I am unable to connect to send via secure SMTP.
By contrast, I am able to view and send mail with Apple and Android devices without any problems.
On my comparable UAT configuration the S60 devices do not have this problem.
On UAT, we use a self-signed certificate, as opposed to the Live system which uses a Verisign certificate.
Help, please!
I'd like to be able to send mail with my S60 devices.
How can I resolve this apparent problem with the certificate?
Echo

An Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>'

How to setup SMTP server in PC so as to send mails using JavaMail

Hi,
From forums i got it cleared that we can use JavaMail to send emails. I also got two sample codes about getting it done. But in the code its asks address of the host of SMTP server. I dont have any SMTP server. But i am writing a Library Application in which an email must be sent to users automatically when thier books are in overdue.
Where can i get SMTP server to be installed on my PC so that i can use it send mails through Javamail API.
Thanks

Isnt there any way setup SMTP server on own pc?? I just want to send mails in my local area network.

Transport protocol SMTP in Mail Sender Adapter

Hi Experts,
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
I am referring Note 856599 - FAQ Mail Adapter.pdf but not getting a l
" 9. Other Questions
Q: How can I configure my sender channel for my SMTP server?
A: You can specify your SMTP server as URL. For example, if your
server is called host, your URL should look like
smtp://host:port/ "
Regards,
Shobhit

Hi
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
In case of sending mail from XI you can use SMTP. To read mails you need POP3
IMAP works for both.
Yes in XI mail adapter receiver type. URL field you can use URL like
SMTP://Mailhost.com
Refer this
The specified item was not found.
Thanks
Gaurav

SMTP Send mail

Similar Messages

Maybe you are looking for