SMTP Send Timeout

Is it possible to configure a send timeout for outgoing SMTP messages, so that SAP regards the send order as failed if the timeout expires before the remote server accepts the data with "250 OK" ?
I test with a MiniSap 710 system. It seems that when the send timeout (2 min) expires, the message is regarded as successfully sent. At least the recipient list in the SAPConnect outbox says "Recipient .... is valid. Delivery attempted." and no retries are done.

Hi Siddhesh,
The trace says:
18.06.2008
10:26:22
SX_PERFORM_SMTPSEND
   G
Node Data: localhost 8025
18.06.2008
10:26:22
SX_PERFORM_SMTPSEND
   G
CL_SMTP_REQUEST Successfully Created and Filled with Data
18.06.2008
10:26:22
SX_PERFORM_SMTPSEND
   G
Send Routine IF_SMTP_CLIENT->SEND Is Now Called.
18.06.2008
10:26:22
CL_SMTP_REQUEST->GENERATE_XSTRIN
   G
SMTP-ENVELOPE: S T EX IADR33000000000172 Dcompany2.com Oc2u1@comp
18.06.2008
10:26:22
CL_SMTP_REQUEST->GENERATE_XSTRIN
   G
SMTP-ENVELOPE: any2.com Rtest<at>pcfs.topcall.com YS X                             .... changed by me: cannot post this with an <at> sign...
18.06.2008
10:28:12
SX_PERFORM_SMTPSEND
   G
IF_SMTP_CLIENT->SEND Successfully Called
18.06.2008
10:28:12
SX_PERFORM_SMTPSEND
   G
Recipient List After Sending (First 50 Characters with Status Code):
18.06.2008
10:28:12
SX_PERFORM_SMTPSEND
   G
test<at>pcfs.topcall.com 718                                                       .... changed by me: cannot post this with an <at> sign
18.06.2008
10:28:12
SX_PERFORM_SMTPSEND
   G
718 = 250 recipient OK
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
Start of synchronous Status Update
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
Deleted from Queue: RAW33000000000402                 ADR33000000000172
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
SOES updated: ADR33000000000172
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
Structure: SOES
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
No Statusmail/No Event for Status 718
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
SOST updated
18.06.2008
10:28:12
SO_SYNCHRON_STATUS_UPDATE
   G
End of synchronous Status Update
18.06.2008
10:28:12
SX_PERFORM_SMTPSEND
   G
SAPconnect (E)SMTP Outbound Processing Will Now Be Exited
... although the SMTP server has not responded to the end of data....
regards,
Annemarie

Similar Messages

[代发帖子]10.2.0.4.0版本rac 报IPC Send timeout detected.Sender 错误问题

以下为代网友发帖，内容为
环境：db：10.2.0.4.0 system：aix 6.1
请各位大师帮忙确定是什么原因导致的
node1
Wed Aug 22 09:59:17 2012
IPC Send timeout detected.Sender: ospid 25821502
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:17 2012
IPC Send timeout detected.Sender: ospid 24838548
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:18 2012
IPC Send timeout detected.Sender: ospid 18743888
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:18 2012
IPC Send timeout detected.Sender: ospid 8586514
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:19 2012
IPC Send timeout detected.Sender: ospid 21365006
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:20 2012
IPC Send timeout detected.Sender: ospid 18088896
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:20 2012
IPC Send timeout detected.Sender: ospid 15467098
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:20 2012
Wed Aug 22 09:59:44 2012
IPC Send timeout detected.Sender: ospid 9635304
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 09:59:44 2012
IPC Send timeout detected.Sender: ospid 1704160
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 09:59:44 2012
IPC Send timeout detected.Sender: ospid 2687916
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 09:59:44 2012
IPC Send timeout detected.Sender: ospid 1836306
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 09:59:45 2012
IPC Send timeout detected.Sender: ospid 11273456
Wed Aug 22 10:00:03 2012
IPC Send timeout detected.Sender: ospid 4982212
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 629
Wed Aug 22 10:00:03 2012
IPC Send timeout detected.Sender: ospid 15270298
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.5 inc 28 for msg type 36 from opid 374
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 619
Wed Aug 22 10:00:03 2012
IPC Send timeout detected.Sender: ospid 16712906
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 626
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 376
Wed Aug 22 10:00:03 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 260
Wed Aug 22 10:00:03 2012
IPC Send timeout detected.Sender: ospid 12125594
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:04 2012
IPC Send timeout detected.Sender: ospid 22086174
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:04 2012
IPC Send timeout detected.Sender: ospid 8979076
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:00:04 2012
IPC Send timeout detected.Sender: ospid 23004052
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:04 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 640
Wed Aug 22 10:00:04 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 114
Wed Aug 22 10:00:04 2012
IPC Send timeout to 1.5 inc 28 for msg type 36 from opid 642
Wed Aug 22 10:00:04 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 644
Wed Aug 22 10:00:04 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 228
Wed Aug 22 10:00:04 2012
IPC Send timeout detected.Sender: ospid 13436000
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:05 2012
IPC Send timeout detected.Sender: ospid 4850956
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:00:05 2012
IPC Send timeout detected.Sender: ospid 21627618
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:00:05 2012
IPC Send timeout to 1.1 inc 28 for msg type 36 from opid 637
Wed Aug 22 10:00:05 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 648
Wed Aug 22 10:00:05 2012
IPC Send timeout to 1.1 inc 28 for msg type 36 from opid 628
Wed Aug 22 10:00:05 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 647
Wed Aug 22 10:00:05 2012
IPC Send timeout detected.Sender: ospid 23724892
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:05 2012
IPC Send timeout detected.Sender: ospid 14353416
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:05 2012
IPC Send timeout detected.Sender: ospid 15270628
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 634
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 235
Wed Aug 22 10:00:06 2012
IPC Send timeout detected.Sender: ospid 10749150
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 72
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 654
Wed Aug 22 10:00:06 2012
IPC Send timeout detected.Sender: ospid 16123646
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:00:06 2012
IPC Send timeout detected.Sender: ospid 19005890
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 655
Wed Aug 22 10:00:06 2012
IPC Send timeout detected.Sender: ospid 1311244
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:06 2012
IPC Send timeout to 1.5 inc 28 for msg type 36 from opid 658
Wed Aug 22 10:00:07 2012
IPC Send timeout detected.Sender: ospid 14091918
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:07 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 424
Wed Aug 22 10:00:07 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 631
Wed Aug 22 10:00:07 2012
IPC Send timeout detected.Sender: ospid 14876874
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:07 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 661
Wed Aug 22 10:00:07 2012
IPC Send timeout detected.Sender: ospid 18613208
Receiver: inst 2 binc 1412232506 ospid 27066946
Wed Aug 22 10:00:07 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 664
Wed Aug 22 10:00:07 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 603
Wed Aug 22 10:00:07 2012
IPC Send timeout detected.Sender: ospid 2818720
Receiver: inst 2 binc 1412232544 ospid 25362610
Wed Aug 22 10:03:54 2012
IPC Send timeout to 1.1 inc 28 for msg type 36 from opid 1219
Wed Aug 22 10:04:05 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 2256
Wed Aug 22 10:04:08 2012
IPC Send timeout to 1.1 inc 28 for msg type 36 from opid 1908
Wed Aug 22 10:04:10 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1476
Wed Aug 22 10:04:12 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1653
Wed Aug 22 10:04:12 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1266
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1345
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1202
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1203
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1239
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1237
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1207
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1197
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1313
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.5 inc 28 for msg type 32 from opid 1274
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc 28 for msg type 32 from opid 1140
Wed Aug 22 10:04:13 2012
IPC Send timeout to 1.1 inc Wed Aug 22 10:25:55 2012Node2:
Wed Aug 22 09:47:57 2012
Error 2056 trapped in 2PC on transaction 20.16.21521114. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:48:28 2012
Error 2056 trapped in 2PC on transaction 78.44.4484418. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Error 2056 trapped in 2PC on transaction 17.42.11081684. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:48:42 2012
Error 2056 trapped in 2PC on transaction 75.15.10618335. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:48:58 2012
Error 2056 trapped in 2PC on transaction 62.28.20411900. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:49:04 2012
Error 2056 trapped in 2PC on transaction 81.34.7287924. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:50:01 2012
Thread 2 advanced to log sequence 53611 (LGWR switch)
Current log# 5 seq# 53611 mem# 0: /dev/rredo05_rzdb
Wed Aug 22 09:50:34 2012
Error 2056 trapped in 2PC on transaction 71.15.14657575. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:50:46 2012
Error 2056 trapped in 2PC on transaction 84.12.11181366. Cleaning up.
Error stack returned to user:
ORA-02056: 2PC: k2lpre: bad two-phase command number 0 from coord
Wed Aug 22 09:50:48 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/udump/crmrz2_ora_23856588.trc:
ORA-00600: internal error code, arguments: [ksqcmi:res2], [], [], [], [], [], [], []
Wed Aug 22 09:50:49 2012
Trace dumping is performing id=[cdmp_20120822095049]
Wed Aug 22 09:59:16 2012
IPC Send timeout detected. Receiver ospid 27066946
Receiver is waiting for a latch dumping latch state for receiver -17356
Wed Aug 22 09:59:16 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms4_25362610.trc:
Wed Aug 22 09:59:38 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms0_27066946.trc:
Wed Aug 22 09:59:38 2012
Trace dumping is performing id=[cdmp_20120822095938]
Wed Aug 22 10:02:09 2012
kkjcre1p: unable to spawn jobq slave process
Wed Aug 22 10:02:09 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_cjq0_25100728.trc:
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lmon_25493740.trc:
ORA-29740: evicted by member 0, group incarnation 30
Wed Aug 22 10:02:32 2012
LMON: terminating instance due to error 29740
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms2_24904066.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms6_25626088.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms3_25559280.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms5_22873874.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms1_24905100.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc1_26543176.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc1_26543176.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc1_26543176.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Master background archival failure: 29740
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lgwr_26477376.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lck0_22677374.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lmd0_27132530.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:32 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_pmon_25494950.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:33 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_mman_21235492.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:33 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc0_25036272.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:33 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc0_25036272.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:33 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_arc0_25036272.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:33 2012
Master background archival failure: 29740
Wed Aug 22 10:02:33 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_smon_22743004.trc:
ORA-29740: evicted by member , group incarnation
Wed Aug 22 10:02:34 2012
Shutting down instance (abort)
License high water mark = 1722
Wed Aug 22 10:02:38 2012
Instance terminated by LMON, pid = 25493740
Wed Aug 22 10:02:39 2012
Instance terminated by USER, pid = 22873880
Wed Aug 22 10:03:09 2012
Starting ORACLE instance (normal)
sskgpgetexecname failed to get name
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 en10 192.100.100.0 configured from OCR for use as a cluster interconnect
Interface type 1 en9 134.224.106.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes                = 3000
sessions                 = 3305
resource_limit           = TRUE
event                    =
sga_max_size             = 51539607552
__shared_pool_size       = 4227858432
__large_pool_size        = 16777216
__java_pool_size         = 33554432
__streams_pool_size      = 0
spfile                   = /dev/rspfile_rzdb
sga_target               = 51539607552
control_files            = /dev/rcntrl01_rzdb, /dev/rcntrl02_rzdb, /dev/rcntrl03_rzdb
db_block_size            = 8192
__db_cache_size          = 46707769344
db_keep_cache_size       = 536870912
compatible               = 10.2.0.3.0
log_archive_dest_1       = location=/arch02
db_files                 = 1000
db_file_multiblock_read_count= 16
cluster_database         = TRUE
cluster_database_instances= 2
thread                   = 2
instance_number          = 2
undo_management          = AUTO
undo_tablespace          = UNDOTBS2
undo_retention           = 900
recyclebin               = OFF
remote_login_passwordfile= EXCLUSIVE
db_domain                =
dispatchers              = (PROTOCOL=TCP) (SERVICE=crmrzXDB)
local_listener           = (ADDRESS = (PROTOCOL =TCP)(HOST = 134.224.106.126)(PORT = 1521))
remote_listener          = LISTENERS_CRMRZ
utl_file_dir             = /arch01
job_queue_processes      = 20
cursor_sharing           = SIMILAR
background_dump_dest     = /oracle/opt/product/10.2.0/db/admin/crmrz/bdump
user_dump_dest           = /oracle/opt/product/10.2.0/db/admin/crmrz/udump
core_dump_dest           = /oracle/opt/product/10.2.0/db/admin/crmrz/cdump
audit_file_dest          = /oracle/opt/product/10.2.0/db/admin/crmrz/adump
db_name                  = crmrz
open_cursors             = 1500
pga_aggregate_target     = 10726932480
Cluster communication is configured to use the following interface(s) for this instance
192.100.100.2
Wed Aug 22 10:03:11 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=24379686
DIAG started with pid=3, OS id=22743022
PSP0 started with pid=4, OS id=24773700
LMON started with pid=5, OS id=25429322
LMD0 started with pid=6, OS id=25494130
LMS0 started with pid=7, OS id=24904068
LMS1 started with pid=8, OS id=9437246
LMS2 started with pid=9, OS id=13304862
LMS3 started with pid=10, OS id=24969498
LMS4 started with pid=11, OS id=26936330
LMS5 started with pid=12, OS id=26935868
LMS6 started with pid=13, OS id=25167108
MMAN started with pid=14, OS id=27132604
DBW0 started with pid=15, OS id=26739208
DBW1 started with pid=16, OS id=23790482
DBW2 started with pid=17, OS id=25626104
DBW3 started with pid=18, OS id=25494956
LGWR started with pid=19, OS id=26673758
CKPT started with pid=20, OS id=26542676
SMON started with pid=21, OS id=20383626
RECO started with pid=22, OS id=26477394
CJQ0 started with pid=23, OS id=26411882
MMON started with pid=24, OS id=26346430
Wed Aug 22 10:03:14 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=25, OS id=25624582
Wed Aug 22 10:03:14 2012
starting up 1 shared server(s) ...
Wed Aug 22 10:03:19 2012
lmon registered with NM - instance id 2 (internal mem no 1)
Wed Aug 22 10:03:26 2012
Reconfiguration started (old inc 0, new inc 33)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 valid = 0 according to instance 0
Wed Aug 22 10:03:26 2012
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Wed Aug 22 10:03:26 2012
LMS 4: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 6: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 2: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 1: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 5: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 3: 0 GCS shadows cancelled, 0 closed
Wed Aug 22 10:03:26 2012
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Wed Aug 22 10:03:28 2012
LMS 5: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 6: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 4: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 2: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 1: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 3: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
LMS 0: 0 GCS shadows traversed, 0 replayed
Wed Aug 22 10:03:28 2012
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=28, OS id=26215276
Wed Aug 22 10:03:33 2012
ALTER DATABASE   MOUNT
Wed Aug 22 10:03:37 2012
Setting recovery target incarnation to 1
Wed Aug 22 10:03:37 2012
Successful mount of redo thread 2, with mount id 3477695295
Wed Aug 22 10:03:37 2012
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE   MOUNT
Wed Aug 22 10:03:38 2012
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Wed Aug 22 10:03:59 2012
Trace dumping is performing id=[cdmp_20120822100344]
IPC Send timeout detected. Receiver ospid 24904068
Wed Aug 22 10:04:03 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms0_24904068.trc:
Wed Aug 22 10:04:59 2012
Trace dumping is performing id=[cdmp_20120822100458]
Wed Aug 22 10:05:19 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=32, OS id=26739814
Wed Aug 22 10:05:19 2012
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=31, OS id=24445226
Wed Aug 22 10:05:20 2012
IPC Send timeout detected. Receiver ospid 24904068
Wed Aug 22 10:05:20 2012
Errors in file /oracle/opt/product/10.2.0/db/admin/crmrz/bdump/crmrz2_lms0_24904068.trc:
Wed Aug 22 10:05:21 2012
Thread 2 opened at log sequence 53612
Current log# 6 seq# 53612 mem# 0: /dev/rredo06_rzdb
Wed Aug 22 10:05:21 2012
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Wed Aug 22 10:05:21 2012
ARC0: Becoming the heartbeat ARCH
Wed Aug 22 10:05:21 2012
Successful open of redo thread 2
Wed Aug 22 10:05:21 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Aug 22 10:05:21 2012
SMON: enabling cache recovery
Wed Aug 22 10:06:31 2012
WARNING: inbound connection timed out (ORA-3136)
Wed Aug 22 10:06:32 2012
Successfully onlined Undo Tablespace 4.
Wed Aug 22 10:06:32 2012
SMON: enabling tx recovery
Wed Aug 22 10:06:32 2012
Database Characterset is ZHS16GBK
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 28
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=42, OS id=25887794
Wed Aug 22 10:06:43 2012
Completed: ALTER DATABASE OPEN
Wed Aug 22 10:07:00 2012
WARNING: inbound connection timed out (ORA-3136)
Wed Aug 22 10:07:13 2012
WARNING: inbound connection timed out (ORA-3136)
Wed Aug 22 10:07:25 2012
WARNING: inbound connection timed out (ORA-3136)
Wed Aug 22 10:07:31 2012
Trace dumping is performing id=[cdmp_20120822100731]
Wed Aug 22 10:09:20 2012
Trace dumping is performing id=[cdmp_20120822100732]
Wed Aug 22 10:25:54 2012

2012-08-22 10:01:23.571: [ CRSEVT][11527]32CAAMonitorHandler :: 0:Could not join /oracle/opt/product/10.2.0/crs/bin/racgwrap(check)
category: 1234, operation: scls_process_join, loc: childcrash, OS error: 0, other: Abnormal termination of the child
2012-08-22 10:01:31.473: [ CRSEVT][11527]32CAAMonitorHandler :: 0:Action Script /oracle/opt/product/10.2.0/crs/bin/racgwrap(check) timed out for ora.crmrz01.vip! (timeout=60)
2012-08-22 10:01:31.474: [ CRSAPP][11527]32CheckResource error for ora.crmrz01.vip error code = -2
2012-08-22 10:03:04.553: [ CRSEVT][11530]32CAAMonitorHandler :: 0:Could not join /oracle/opt/product/10.2.0/crs/bin/racgwrap(check)
category: 1234, operation: scls_process_join, loc: childcrash, OS error: 0, other: Abnormal termination of the child
2012-08-22 10:03:04.553: [ CRSEVT][11530]32CAAMonitorHandler :: 0:Action Script /oracle/opt/product/10.2.0/crs/bin/racgwrap(check) timed out for ora.crmrz01.vip! (timeout=60)
2012-08-22 10:03:04.554: [ CRSAPP][11530]32CheckResource error for ora.crmrz01.vip error code = -2
2012-08-22 10:03:39.055: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:03:39.138: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:03:39.630: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:03:39.814: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:13.506: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:04:13.522: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:13.610: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:04:13.618: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:44.509: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:04:44.525: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:44.898: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:04:44.915: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:58.959: [ COMMCRS][3866]Authorization failed, network error
2012-08-22 10:04:58.963: [ OCRSRV][3866]th_select_answer: Failure in answer. clsc ret [3]
2012-08-22 10:04:59.047: [ COMMCRS][3866]Authorization failed, network 2012-08-22 10:12:25.310: [ CRSRES][11569]32startRunnable: setting CLI values
crs 日志network error 基本上可以确定当时的网络是存在问题

SMTP sender issue

I have a SQR reprot which send report via emails. Recently I have changed the SMTP sender to another e-mail address in the configuration file of app server and did a bounce of application server. Now the issue is that the emails are being sent with the old email address,so what might be the issue?Do we have to change the SMTP sender in the configuration file of the process scheduler?

Yes, since the SQR are managed by the Process Scheduler, you should modify the prcs config file.
Nicolas.

SMTP send mail message

SMTP send mail message is giving 'unkown mime version' error(error code 16500). The same mail server works when sending by Netscape mail.Any help greatly appreciated.

Hi,
There seem to be a bug in the OGIC_POP.llb\OGIC_POP_ListMessages.vi.
Or at least it needs customization to process the response from each mail server. If you open the diagram for this VI, you'll see that it is using the "+OK\s" regular expression to reach the end of the string before the msg-number, msg-size list. In your case, this string is "+OK 5 messages (6190 octets)"
You need to modify the diagram to skip this whole string. One easy way would be to use just "+OK" with the first Match Pattern fuinction and then use an "\r\n" and pass this to the true-case.
I am attaching a screenshot of this. And I have tested this to work fine -- I get the messages in the array.
Hope this helps,
Khalid
Attachments:
modified_pop_listmsgs.bmp ‏1083 KB

Bug? SMTP send hangs LabVIEW

I am trying to send an email during an alarm state using the SMTP VIs included with LabVIEW (2013, have not tested 2012). It seems that the SMTP send VI hangs LabVIEW while it is running to the point that my software doesn't start shutting down because LabVIEW is waiting for SMTP send.
SMTP send is running parallel to everything else, so it shouldn't cause a hang just because it hasn't finished running. The UI stops redrawing (i.e. if I open a window in front of the program and close it, LabVIEW doesn't redraw the front panel - I still see the old window), every parallel process in the code stops running, and the cursor changes to the busy cursor while it works away.
Today at my office, this delay is 3-5 seconds. Last week when testing at my customer, the delay was 20-30 seconds. The email always gets sent, but it seems while it is logging into the mail server and doing whatever transactions are necessary, LabVIEW is non-responsive.
Please note I am sending a 1-2 sentence email with no attachments. I am not use SLL/TLS, although my server does require a username and password login.
Is anyone else seeign this?
Thanks,
Matthew

Joel,
Same behavior. As I noted in my original post, it locks up at send. If you have a fast connection to your server and are sending a short messsage, you may not see it. My server has a delay for loggin in and it is not internal, so it takes 5 seconds or so for it to login, and send the email. During that time, LabVIEW is non-responsive.
If you have a quick connection, you may need to try using the vi that sends attachments so the session with the server lasts longer.
The issue is specifically with vi.lib\smtpClient\Send.vi. It is password protected, so I cannot determine exactly what is locking up, but it is in there.
For now, I found an example on the forums that is not very robust, but got me through the immediate problem. It can send an email without locking up LabVIEW, so I know NI's code is doing something it probably shouldn't be.
Matthew

SMTP send error

I tried to send email to
[email protected]
using SMTP Send File vi
and then I got an error 2100 saying
"500 Syntax error, command "MIME-Version: 1.0" unrecognized"
How can I send email to address like
[email protected]?
Thanks.

I think your issue is the connection to the SMTP server. First off, the smtp server for gmail (according to gmail help) is smtp.gmail.com, not smtp.google.com. Secondly, the port for the gmail smtp server is 465, while the SMTP vi's by default open port 25. Theoretically, you could edit the VI that opens a TCP port, but you would have to resave most of the smtp hierarchy to avoid changing the version saved in vi.lib. Finally and most importantly, the gmail smtp server requires SSL encryption, which I have no idea how to start implementing.
So how do you send mail in LabVIEW?
I have had luck communicating with the internal servers set up by our IT dept because they apparently have no authenication or encryption methods to navigate. In the non-corporate setting, I have also had luck using a free SMTP server. When using this server, simply type "localhost" for the SMTP server. Finally, you could take a look at the ActiveX option this post explores.
Hope this helps.
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

SMTP send Multiple Atacchement.vi / labVIEW6.1

こんにちは。
現在、LabVIEW6.1のインターネットツールキットの中にある
「SMTP send Multiple Atacchement.vi」を使用してEXCELファイルを
添付してメール送信しております。
メールを送信した相手先にメールが確実に届きますが、
excelファイルのファイル名だけが文字化けしてしまいます。
excelファイルの中身のデーターは文字化けは発生しておりません。
excelファイルは日本語で名前をつけています。
どうしたら、ファイル名だけの文字化けを防ぐことができるのか
教えてください。
よろしくお願い致します。

お世話になっております。
弊方で使用しているインターネットツールキットとのバージョンが違ったようで
ファイル名等がこちらの指定しているものと異なっているようです。
バージョンの違いに気づかず、大変に失礼いたしました。
こちらのバージョンを変更して確認しましたところ
確かに、「SMTP Email Format Header Field.vi」ではなくて「SMTP Format Header Field.vi」が有り
また、その中に「SMTP Email ConvertToJISB64.vi」は有りませんでした。
本バージョンでの対処方法としましては、「SMTP Format Header Field.vi」を任意の別名で保存した後に
「header name (Subject: )」という文字列制御器を定数に変更し、空白の文字列にして下さい。
変更し保存したVIを
「SMTP send Multiple Atacchement.vi」＞＞「SMTP send Multiple Atacchements Message.vi」＞＞「MIME Send File Attachment.vi」＞＞「MIME Send Separator.vi」の「name」制御器の直後のワイヤに挿入するような形でワイヤし直します。
元のワイヤを、「header content」端子に接続し、「encoded header line」端子から出力します。
さらに、「character set」に文字列定数として、「ISO-2022-JP」を入力してください。
以上の変更で、ファイル名をエンコードして送信できるようになると思われます。
よろしくお願い申し上げます。

Cannot send emails - connection to SMTP server timeout

I cannot send emails from my Thunderbird. Every time I try, an error message shows up saying that the connection to SMTP server has timed out:
"Sending of message failed.
The message could not be sent because the connection to SMTP server smtp.lineone.net timed out. Try again or contact your network administrator."
I have looked at many different possible solutions and tried them, but nothing seems to be working. I have tried several different ports, failed to send in Safe Mode with Networking and Thunderbird safe mode without add-ons and tried many different settings. I have ensured that the my settings on Thunderbird match the settings that my ISP recommends. My anti-virus software is not affecting it either. Maybe there is something I am missing but I would really appreciate any suggestions!
Here is some general info:
Mail provider: lineone
ISP: BT
Anti-virus software: AVG
OS: Windows Vista
Thunderbird version: 31.5.0

Hello @shredo,
Firstly, I would suggest reading this support article: https://support.mozilla.org/en-US/kb/cannot-send-messages
If that doesn't help, try some of these things (not sorted in any particular order):
*Test your connection in another network. There might just be some blocked ports in your router or conflict of some sort.
* Test your smtp settings in another email client (to ensure that they actually work). If it doesn't work, there might be some missmatch with the settings (even though you have ensured that they match), or some restriction by your router or something.
* Apparently, compacting your thunderbird folders might help with this issue (something to do with too many "deleted", that are still there) - http://kb.mozillazine.org/Thunderbird_:_Tips_:_Compacting_Folders
I hope this helps.

ICloud SMTP server timeout

Hi all
Using iCloud through Mail on OSX 10.7.4, I cannot send any emails
I receive them just fine, but it will always timeout when trying to send emails
The smtp server I seem to be on is p02-smtp.mail.me.com. I tried to ping it and it has 100% packet loss, although this might just mean they reject ICMP requests.
Sending from my iPhone or iCloud on the web works just fine
Any ideas?

Seriously no one have a clue or a comment on this?
I tried adding a different smtp server (smtp.mail.me.com), using port 587 w/ SSL and all to no avail
Still timing out
Is there any way to contact Apple Support directly via email or something somewhere?
Thanks

SMTP connection timeout

Hi,
This question might sound naive, but I just couldn�t find the answer.
For POP, IMAP and HTTP it is easy to setup idle connection timeout (just use configutil).
But what about SMTP connections?
It is set by default on some value (if I just telent on port 25 and live the connection idle, the message �Connection to host lost� will appear after aproximetly 5 minutes), but I cannot find where it can be changed.
On the other hand, what if connection is not idle, but the user is trying to send a bit biger mail but the link is really slow� how is this treated, what is the timeout for this situation and where this can be changed?
Thanks a lot, as always :)

The thing I�m having on my mind is to set this timeout to bigger number, and let slow connections to stay alive for more than 10 minutes.
The only parameter I found is MAX_IDLE_TIME in dispatcher.cnf file, by default it is set to 600.
But the explanation for this parameter is a bit confusing:
MAX_IDLE_TIME=integer
Specifies the maximum idle time for a server process. When an server process has had no active connections for this period, it becomes eligible for shutdown. This option is only effective if there are more than the value of MIN_PROCS server processes currently in the Dispatcher's pool for this service.
Anyway, for testing purposes I set this parameter to 6000 instead of 600, and did:
./imsimta cnbuild
./imsimta restart
Again I telnet to port 25 and live the connection idle, the message �Connection to host lost� appear again after approximately 10 minutes), so it seems like nothing was changed.
So, is this the wrong parameter, or for some other reason time is not expanded?
Btw,
./imsimta version
iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)
libimta.so 5.2 HotFix 1.21 (built 18:35:22, Sep 8 2003)

MailAPI SMTP sending error: 'Could not convert socket to TLS'

I'm stucked with smtp authentication in a project.
The process works on port 25 with no STARTTLS, but unfortunately our company server uses port 587 and STARTTLS.
It seems that only the half of the authentication process could be successful, as the server accepts EHLO, but when it switches to secure the program fails with the exception:
'Could not convert socket to TLS'
The simplified code (from a sample app) is:
public void SendMail() throws Exception{
        Properties props = new Properties();
        props.setProperty("mail.transport.protocol", "smtp");
        props.setProperty("mail.smtp.host", "smtpserver");
        props.setProperty("mail.smtp.port", "587");
        props.setProperty("mail.smtp.auth", "true");
        props.setProperty("mail.smtp.auth.ntlm.domain", "codomain");
        props.setProperty("mail.smtp.starttls.required", "true");
        props.setProperty("mail.smtp.auth.mechanisms", "LOGIN NTLM");
        Session mailSession = Session.getDefaultInstance(props, null);
        mailSession.setDebug(true);
        Transport transport = mailSession.getTransport();
        MimeMessage message = new MimeMessage(mailSession);
        message.setSubject("My subject");
        message.setFrom(new InternetAddress("[email protected]"));
        message.setContent("<h1>Hello world</h1>", "text/html");
        message.addRecipient(Message.RecipientType.TO,
                            new InternetAddress("[email protected]"));
        transport.connect("smtpserver", 587, "CODOMAIN\\myaccount", "mypass");
        transport.sendMessage(message,
        message.getRecipients(Message.RecipientType.TO));
        transport.close();
   }

I'll copy the full message below:
+2010.06.29. 12:03:10 mailapi_2.Main main+
SEVERE: null
javax.mail.MessagingException: Could not convert socket to TLS;+
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1652)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:534)
at javax.mail.Service.connect(Service.java:291)
at mailapi_2.SimpleMail.SendMail1(SimpleMail.java:59)
at mailapi_2.Main.main(Main.java:23)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1035)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:124)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:503)
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:443)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1647)
+... 4 more+
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
at sun.security.validator.Validator.validate(Validator.java:218)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
Could not convert socket to TLS
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1014)
+... 14 more+
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
+... 20 more+
And the output panel before the exception:
Sending mail...
DEBUG: setDebug: JavaMail version 1.4.3
+DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]+
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "smtpserver", port 587, isSSL false
+220 exch.plt.local Microsoft ESMTP MAIL Service ready at Tue, 29 Jun 2010 12:03:08 +0200+
DEBUG SMTP: connected to host "smtpserver", port: 587
EHLO machine.codomain.local
+250-smtpserver.codomain.local Hello [xxx.xxx.xxx.xxx]+
+250-SIZE 15728640+
+250-PIPELINING+
+250-DSN+
+250-ENHANCEDSTATUSCODES+
+250-STARTTLS+
+250-AUTH GSSAPI NTLM+
+250-8BITMIME+
+250-BINARYMIME+
+250 CHUNKING+
DEBUG SMTP: Found extension "SIZE", arg "15728640"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "AUTH", arg "GSSAPI NTLM"
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "BINARYMIME", arg ""
DEBUG SMTP: Found extension "CHUNKING", arg ""
STARTTLS
+220 2.0.0 SMTP server ready+

SMTP, Sending, Not Sending?

Here is the mail I sent the MAC shop with a couple of extras at the end
For Email:
My iBook G4 is running Tiger 10.4.11 and I never had any problems, it works great.
My new MacBook running Leopard 10.5.1 has problems when on both wireless network and cdma network.
I have set-up my 4 email accounts on my MacBook exactly the same as on my iBook but there is a problem when sending email on the MacBook.
When I send email the following can happen:
1) Activity viewer shows "Sending data (100% Done)" but it just stays there and does not send (screenshot attached).
2) It starts to send and then stops and gives an SMTP Error (screenshot attached).
3) The email sends but takes more than 5 minutes to send a 5kb email.
I then try on iBook with same configuration and modem and no problem, I have also configured email accounts on DELL M1330 & Compaq Presario laptops and can send no problem using cdma and wireless.
I have checked SMTP settings many times, including outgoing ports used and they are all correct.
I even used the ISP's SMTP with limited success, it works now and then but still errors with the smtp error or the "Done 100%"......
I am not sure if this is an issue related to Wireless or CDMA Modem I use....But it is driving me nuts and really am at a total loss as to what to do.
Please help

You may not have the same problem but what I did is worth a try.
First, when I went to Leopard some of the outgoing settings didn't copy over. In MAC Mail I didn't get the send button to be available. Outgiong mail settings including the server and advaned settings must be what your ISP needs. My Yahoo mail would send fine but MAC Mail wouldn't. Mail>Prefrerences>Accounts - Outgoing Server - Edit Server > Advanced - Server, SSL, Authentication all must be correct.
MAC Mail for some reason also requires a DNS server setting in the network setup.
Under System Preferences, go to Network and add your DNS numbers for your ISP Server. Get the right numbers from your ISP. I did a search for "DNS" on the ATT/YAHOO member web site.
This fixes the slow checking and sending of mail....It also fixes problems where mail sends slow and may give Authentication errors.
I spent many hours on this and finally the answer was posted on this forum.

Mail not received sent through SMTP Send Mail Task

Hi,
I have a SSIS package which will send mail notifications. This package is deployed on Integration Services Catalogues as Project deployment. This package having a list of notifications regarding the task status.The receiver end got few
notifications but missed of the notifications. This issue is not frequent. Sometimes we are getting all notifications. Sotimes missing some notification. All these using SMTP tasks with same SMTP connection.
I checked the task status in Standard Reports for all Executions. The task status for all these notification tasks are Success.
What are the possible reasons for this?
Thanks and regards,
Muhammed Shakeer
Muhammed Shakeer

Hi Muhammed,
If the issue happens sometime only and all executions was run successfully, then the issue should be caused by the SMTP server. The SMTP server may refuse the connections.
To verify the cause, please:
Check SMTP server log
Enable logging for the SMTP task. Check the log after execution
To understand how to enable Logging, please see:
http://technet.microsoft.com/en-us/library/ms181205(v=sql.110).aspx
Thanks,
Jinchun Chen

Weblogic smtp connection timeout!

Hi, when I deployed my program in the weblogic server, everything is ok, but after somedays it can not send mail! I believe my code is available, because I can send mail in my tomcat server in the same machine. Can anyone help me or give me some clue?
Thanks a lot!
The following is exception:
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: Could not connect to SMTP host: smtp.bea.com, port: 25;
nested exception is:
java.net.ConnectException: Connection timed out
at javax.mail.Transport.send0(Transport.java:219)
at javax.mail.Transport.send(Transport.java:81)
at com.bea.tuxedo.crinfo.businesslogic.Sev1Record.Sev1SubmitHandler.sendMail(Sev1SubmitHandler.java:281)
at com.bea.tuxedo.crinfo.businesslogic.Sev1Record.Sev1SubmitHandler.copyform(Sev1SubmitHandler.java:149)
at com.bea.tuxedo.crinfo.businesslogic.Sev1Record.Sev1SubmitHandler.doRequest(Sev1SubmitHandler.java:53)
at com.bea.tuxedo.crinfo.action.Sev1Record.UpdateSev1CRAction.execute(UpdateSev1CRAction.java:21)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1164)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Just to be clear, you work for BEA, you're using WebLogic, you're trying
to send mail using the smtp.bea.com mail server, and you're asking for
help here? :-)
Assuming the server isn't actually down, and connections aren't timing out
when connecting from other applications or other machines, I would look
into whether there's a firewall that might be preventing you from connecting,
or possibly the mail server has decided that you've connected too often or
have too many open connections and so won't let you connect again.

SOAP Sender timeout

Hello guys i have a simple problem :
SOAP <=>XI<=>RFC ; where as this states SOAP is sender, everything works fine but when sending SOAP request using XML spy the request reaches XI and becoz of large data its returning , the xml spy is timing out saying HTTP post error but indeed XI is processing this message and i see response coming back in sxmb_moni?
Any help will be greatly appreciated.
Reddy

Hi,
Refer SAP Note - 856597 Question No1 , 893713 ( for Receiver timeout)
ALso look into this blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
REgards,
Moorthy

SMTP Send Timeout

Similar Messages

Maybe you are looking for