SMTP Sever Error Invalid Address

Hi Guys
I have strange issue while sending email from oracle package.Its works fine on Development server but causing problem on testing and production.Well i know the issue on testing SMTP service is not running its fine.but on production its trimming sender address after @ symbol but its not trimming on development.
any suggestion on this plz
Thanks
Ronak

Is the sender address being generated from data in your database, or is it hard coded? If it's generated from data in the database make sure you have valid data, if it's hard coded did you change it's value when moving from development to production?

Similar Messages

UTL.MAIL error ORA-29279: SMTP permanent error: 501 Address Syntax Error in

Hi,
I am new to the forum so please excuse if I post incorrectly without conforming to the standards.
We need to send mails using the UTL.MAIL package and have installed them on the database.
Whenever I am trying to send an email I am getting the following error:
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 Address Syntax Error in
[email protected]
ORA-06512: at "SYS.UTL_MAIL", line 654
ORA-06512: at "SYS.UTL_MAIL", line 671
ORA-06512: at line 2
The test code which I am running is as follows:
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
I have tried different combinations:
BEGIN
UTL_MAIL.send(sender => 'test "<[email protected]>"',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
even tried
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
Everytime I am getting the same error.
This seems to be working with an exchange mail server but never on the SMTP server.
In the SMTP server logs the sender address is not having the angular brackets <> unlike the other mails which are being sent over.
It seems that the SMTP server is pretty strict and the SMTP admin will not change any settings on the server.
The oracle version is as follows
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Could you please help me out with a solution.
Some how the angular brackets are geting stripped off (which UTL MAIL package generally does), Is there any way in which I can include the angular brackets.
Edited by: 984757 on 29-Jan-2013 02:56
Edited by: 984757 on 29-Jan-2013 02:57

I dislike UTL_MAIL - clunky and poor abstraction interface, and not well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP
UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;The GET_ADDRESS() function process the ALL_RCPTS parameter, returns the 1st address from it, and updates the (in/out) parameter with the remaining string.
SQL> var address varchar2(200);
SQL> exec :address := '<[email protected]>,[email protected]';
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=[email protected]
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=
PL/SQL procedure successfully completed.
SQL> The address is explicitly surrounded by brackets as per the RFC. So that is what your SMTP server should see.
If not - perhaps then our UTL_MAIL versions do not match. Cannot recall from what version I pulled and unwrapped the UTL_MAIL package code I have.
Personally though, I've ceased using UTL_MAIL a while back. It lacks in may respects. I have written my own mail package that supports multiple attachment, complex Mime formatting, attachments of 20+ MB in size, and so on - running on the UTL_SMTP interface (that provides the transport layer for sending mail). And for issues like you are facing, I suggest considering using UTL_SMTP directly.
Edited by: Billy Verreynne on Jan 29, 2013 12:52 PM
(Updated the code with HTML entity names to get the code snippet to render correctly)

Heap Error: Invalid Address specified to RtlValidateheap

I have an OCCI program that connect to the Oracle database using Oracle\oraclient\9.2.0 and executes a query. I'm able to connect return a result set and actually display contents from the first row.
However, as soon as I attempt to access the second row I get a heap error - - invalid address specified to RtlValidateHeap.
I've seen other post where changing the type of run-time library under the Code Generation options of the compiler made a difference. Here, I've tried them all: /MTd, /MLd, /MDd but to no avail.
I'm using Visual C++ 6.0 and linking in occi library oraocci9.lib.
The line of code that's getting the error is the following:
while ( resultSet->next () )
no problem in getting the first row. Its the second next that dies.
Any help would be appreciated.

When I build the App with a RELEASE build instead of a DEBUG build this problem goes away.
Apparently there is a bug in the oraocci9.lib regarding allocating on the Heap for DEBUG builds.
While reading the other post on this forum I've discovered that I need the 9.2.04 version of the oraocci9.lib and oraocci9.dll that have been linked with MSVCRTD.dll, which is required to use in Debug mode for MSVC.
It's unfortunate that this bug is not documented in the OCCI Programmer's manual that is available online. I could have saved myself a lot of time.
Where can I find the most up-to-date patches for Oracle 9i?
Any help would be appreciated. Thanks.
Are these files available as standalone downloads on the Oracle web site? I haven't seen them. I don't want to download the entire database if I can avoid it. I just need the upgraded version of oraocci9.lib.

I receive the error "invalid address" even if my apple ID is the correct one...i already tried a lot of times and th einformation is correct, so i m not being able to install any apps or updates..please help me!!!

i receive the error "invalid address" even if my apple ID is the correct one...i already tried a lot of times and the information is correct, so i m not being able to install any apps or updates..please help me!!!

contact itunes support

Apps won't down load error" invalid address " stuck in loop

Can't download apps or update error "invalid address" stuck in loop

Have you tried rebooting your ipad by pressing the home and off button together until the apple appears. It does not affect any data it is just like rebooting your computer if that doesn't work this link might help http://www.apple.com/support/ipad/assistant/application/

Error 'Invalid address style' when create new address Legal Entity R12

Hi,
Did somebody had the same problem like i do.
I am trying to create a new dutch address for a new legal entity in Oracle R12.1.1 Vision, but however hard i trying to do so i always received the error message 'Invalid Address Style' and i filled in all the required field.
When i tested with the country 'US' or 'Australia' is could create a new address without any problem.
I hope you can help me to solve my problem.
Thanks in advance...!!
Wim

Hello Sandeep,
You were right, I checked the dff for the address style and activated the once for the countries I needed and now I can create new address for the required countries by using the legal entity configurator.
Thanks for your help..!!
Regards,
Wim
PS: Incase somebody else has they same problem, let me know and i send you the worddocument i made with the solution

When buying app error invalid address

When buying app error invalid address

waiting for apple to respond
this must have to do with the latest update on my iphone. 4.3.3
ever since i made the update. i have had the "invalid address problem"
my girlfriend has the same iphone4 and we are on the same plan. yet she hasnt made the update yet.
She is downloading apps at this very moment while I sit here frustrated waiting for Apple to get off their *****

SMTP permanent error: 501 5.1.7 Invalid address

hi,
I am getting follwoing error where executing procedure. i am able to send from that server
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 5.1.7 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 222
Thanks,

Seems the issue is with the email address which you are referring to in your execution or else please check whether the smtp server is configured properly.

Inquiry on javax.mail.SendFailedException: Invalid Addresses error

Hi,
Anyone does have any idea why the following is being encountered during the email authentication process? We are using PeopleSoft application and we have notification functionality which will send a notification email to the users but email not being sent due to an invalid email address but actually the email is active and valid. Below are the logs from SMTP
Log Start:
DEBUG SMTP: Sending failed because of invalid destination addresses
Wed Jul 31 09:38:14 GMT+08:00 2013 RSET
Wed Jul 31 09:38:14 GMT+08:00 2013 250 2.0.0 Resetting
Wed Jul 31 09:38:20 GMT+08:00 2013 javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 User unknown
Wed Jul 31 09:38:20 GMT+08:00 2013 at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1141)
Wed Jul 31 09:38:20 GMT+08:00 2013 at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:536)
Wed Jul 31 09:38:20 GMT+08:00 2013 at com.peoplesoft.pt.mcf.mail.MCFOutboundEmail.send(MCFOutboundEmail.java:686)
Wed Jul 31 09:38:20 GMT+08:00 2013 at com.peoplesoft.pt.mcf.mail.MCFOutboundEmail.send(MCFOutboundEmail.java:854)
Log End:
Kindly let us know your thoughts on this.
Thanks.

This isn't an authentication problem. You're sending to an address that your server doesn't know about, so it's rejecting your message. The error from the server is:
550 5.1.1 User unknown

I get this error msg. "An error occurred while sending. The mail sever responded: From address is not valid [R0107001]. My email address is correct. Why?

Can't send email. Get error: "An error occurred while sending. The mail sever responded: From address is not valid [R0107001]. Please verify your email address is correct in your Mail Preference and try again."
My email ([email protected]) is correct.
After receiving the error message I try to resend. Get second error message. BUT AFTER ABOUT SIX TRYS THE MESSAGE IS SENT.
What shall I do???

problem solved. an update thunderbird message showed up, did update and now works. WOW!

Exchange 2013 - Outlook 2010 - 550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address

Hello,
I have issue when sending email to some addresses. Server respond with:
Remote Server returned '550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address (IMCEAINVALID-)'
My enviroment: Exchange 2013, Outlook 2010 - no cached mode. Issue happend with two email addresses but not always.
Any suggestion, how to resolve issue?
Thx.

Hi Tomas,
Does this issue occur in OWA? How is the impact, only one user or all users?
Please try to run Outlook under safe mode to avoid add-ins and AVs.
If there is any 3rd party add-ins, please try to disable them for testing.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Elements 5 won't open, error message "attempt to access invalid address" any solutions please.

I have been using this for years with other problems, however now it refuses to open. I have uninstalled and re-installed after restarting the computer twice. I also deleted every folder I could find with elements in the name to no avail. If I read a camera card elements get photos opens them into elements organiser but if I click the edit photos tab it refuses to open. I have windows vista 32 bit.

Hi Garry,
Yes, I did download PSE 8 and it did work. However, the trial period has ended. I have uninstalled PSE 8. I have also unistalled PSE 5 and then reloaded it. Upon completeion of the PSE 5 load, I tried to open the PSE 5 and the invalid address error message continues to display. I am very sad that I cant get PSE 5 to work. Can you help with more things I can try? Please let me know
All the best
David

Attempt to access invalid address error after June 2014 updates (All IE Versions)

I don't know if anyone else is having this issue but after the recent patch run by MS this week we are getting a high proportion of users unable to access internet explorer (all versions) on Windows 7 machines.
The error displayed is
C:\Program Files\Internet Explorer\iexplore.exe
attempt to access invalid address
This happens when trying to run Internet Explorer short cuts or iexplore.exe directly. I have had a searched around and given the number of users that with the issue I'm surprised if not found more info
Any feedback appricated

Hi,
Glad to see your problem resolved, hope your experience was helpful with others.
Roger Lu
TechNet Community Support

Attempt to access invalid address error message

What does this mean "Attempt to access invalid address" Happens when I try to open PS element 5. I uninstalled and reinstalled my PS element 5 but error message still appears when I try to open the PS sw.

Hi Garry,
Yes, I did download PSE 8 and it did work. However, the trial period has ended. I have uninstalled PSE 8. I have also unistalled PSE 5 and then reloaded it. Upon completeion of the PSE 5 load, I tried to open the PSE 5 and the invalid address error message continues to display. I am very sad that I cant get PSE 5 to work. Can you help with more things I can try? Please let me know
All the best
David

Reader error message attempt to access invalid address

I posted my original question in the wrong forum. When trying to open a pdf with reader I received a message saying "attempt to access invalid address. Per the response on that forum I uninstalled reader and ran the programs at this link http://labs.adobe.com/downloads/acrobatcleaner.html I then restarted the computer and reinstalled reader. During installation I got an error message #150210. More help?

Hi Julie,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

SMTP Sever Error Invalid Address

Similar Messages

Maybe you are looking for