Snapshot Reports randomly (not) triggering Subscription

Hi.
I currently have set up 5 reports that generates a snapshot once a month, additionally I have set on a subscription on each of these.
The problem I am facing is that it seems that the subscription are triggered randomly, one month the subscriber can get 1 report, other months it can get 5 reports (and all in between).
The subscriptions are set up with: "When the report content is refreshed. This option is available only for report snapshots."
And when I view the subscription and snapshot-history of a report that was not send this month (at the time I am writing this), it says:
Snapshot History:  3/1/2015 12:00:10 AM  (lastrun)
Subscriber:            2/1/2015 12:00 AM (last run)
IE: Last month this report had no problem, but this month is has... (This have been going on for a year now)
Does anybody have an idea what could be causing this? (This month 4 of 5 reports got sent)

Hi Gaute Odin,
Per my understanding that you have configured the  Report-special Schedule in the
Snapshot Options to add snapshots to report history and also schedule the subscription set up with: "When the report content is refreshed. This option is available only for report snapshots.", now the issue is that subscription didn't
run as the schedule in the snapshot history, right?
Generally, when you configure the schedule in the "Snapshot Options", it will generate snapshot due to this schedule and you can find the new snapshot information in the "Report History", this setting
have no relationship with the shedule of the subscription.
When you configured the schedule under the "Render this report from a report snapshot" session of the "Processing Options" you will get the subscription to run due to this schedule:
So, please check in the above sceenshot to make sure the schedule is set correcttly.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Similar Messages

  • Scheduled report is not triggered by another report on which it depends

    Hi folks,
    I intend to trigger a group of reports by running a dummy-report (it does not more than executing the function currentDate() and displaying the result in a text field) manually (using InfoView) and use the success of this report as the trigger event for each report of the mentioned report group.
    I tried to start off with only one report to be triggered. This report is scheduled to write an Excel-Sheet to the Default Enterprise Location with a scheduling interval of 5 minutes. The report runs fine within the specified intervals without having specified the dummy-report as a prerequisite event for the actual data report.
    As soon as I define the dummy-report as a triggering event for the data report, the data report is not executed regularly any more, i.e., the first instance appears and remains as "Recurring" in the history list and nothing more happens.
    I first schedule the data report as indicated and then fire up the dummy-report using "Now" from the drop-down list. Interestingly, I have to press the "Refresh Workspace Panel"-Button, before the status of the dummy-report changes from "Running" to "Success", although the report does not a lot. But, as mentioned, the data report is not triggered.
    What am I might doing wrong?
    Cheers
    Bobbyy

    Hi
    When the first time you are placing the excels sheet, the dependent report runs successfully.
    For it to trigger next time the excel sheet should be deleted from that location. Only the occurence of the excel sheet will trigger the second report, so this should be deleted.
    Gangadhar

  • Events not triggering in alv list, point will be given

    Hi friends,
          I am using reuse_alv_list_display fm to display data.
    and i am using reuse_alv_events_get fm to trigger events.
    but, top_of_page, event is not triggering,
    more precisely , the subroutine is not getting recognized by system.  how to rectify this.
    Check my code.
    *& Report  ZSEN_SERVICETAX_GTA
    REPORT  zsen_servicetax_gta NO STANDARD PAGE HEADING LINE-COUNT 100.
    *****************************************TABLES USED**********************************************************************
    *TABLES: BSIS,  "Accounting: Secondary Index for G/L Accounts
           BSAS,  "Accounting: Secondary Index for G/L Accounts (Cleared Items)
           LFA1.  "Vendor Master (General Section).
    *****************************************WORK AREA / INTERNAL TABLE DECLARATION******************************************
    TYPE-POOLS: slis.
    TYPES: BEGIN OF ty_main,
           hkont    TYPE bsis-hkont,
           belnr    TYPE bsis-belnr,
           budat    TYPE bsis-budat,
           blart    TYPE bsis-blart,
           dmbtr    TYPE bsis-dmbtr,
           xblnr    TYPE bsis-xblnr,
           shkzg    TYPE bsis-shkzg,
           augbl TYPE bsis-augbl,
           kz_dmbtr TYPE bsis-dmbtr,
           kz_xblnr TYPE bsis-xblnr,
           kz_blart TYPE bsis-blart,
           kz_belnr TYPE bsis-belnr,
           kz_budat TYPE bsis-budat,
           kz_zuonr TYPE bsis-zuonr,
           name1    TYPE lfa1-name1,
           slno     TYPE i,
           END OF ty_main,
           BEGIN OF ty_bsas,
           belnr TYPE bsas-hkont,
           budat TYPE bsas-budat,
           xblnr TYPE bsas-xblnr,
           augbl TYPE bsas-augbl,
           dmbtr TYPE bsas-dmbtr,
           blart TYPE bsas-blart,
           zuonr TYPE bsas-zuonr,
           END OF ty_bsas.
    DATA: it_main TYPE TABLE OF ty_main,
          wa_main LIKE LINE OF it_main,
          it_bsas TYPE TABLE OF ty_bsas,
          wa_bsas LIKE LINE OF it_bsas.
    DATA: it_sort       TYPE slis_t_sortinfo_alv,
          fieldcatalog  TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_layout     TYPE slis_layout_alv,
          gt_events     TYPE slis_t_event,
          int_fcat      TYPE slis_fieldcat_alv,
          it_header     TYPE slis_t_listheader,
          wa_header     TYPE slis_listheader.
    ************************************************work variables***********************************************************************
    DATA: ven_name   TYPE lfa1-name1,
          post_date  TYPE bsis-budat,
          t_tabix    TYPE sy-tabix,
          i_prg      LIKE sy-repid.
    ***********************************************selection screen***********************************************************************
    SELECTION-SCREEN: BEGIN OF BLOCK gtn WITH FRAME TITLE text-001 .
    SELECT-OPTIONS: date FOR post_date OBLIGATORY.
    SELECTION-SCREEN: END OF BLOCK gtn.
    ************************************************data selection**************************************************************************
    START-OF-SELECTION.
      PERFORM data_retreval.
      PERFORM build_catalog.
      PERFORM layout.
      PERFORM build_events.
      PERFORM sortinfo.
      IF it_main[] IS NOT INITIAL.
        PERFORM display_alv.
      ELSE.
        MESSAGE 'No Records Matching For This Selection' TYPE 'E'.
      ENDIF.
    ******************************data display*********************************************************************************************
    *&      Form  data_retreval
          text
    -->  p1        text
    <--  p2        text
    FORM data_retreval .
      CLEAR:it_main[], wa_main, fieldcatalog[].
    ***********************************************selecting data from bsis table for the given date range**********************************
      SELECT ahkont abelnr abudat ablart admbtr axblnr a~shkzg
             b~augbl
             INTO CORRESPONDING FIELDS OF TABLE it_main
             FROM bsis AS a LEFT OUTER JOIN bsas AS b
             ON abelnr = bbelnr
             WHERE a~budat IN date
             AND   a~blart = 'KR'
             AND   a~shkzg = 'S'
             AND   a~hkont = '0002200530'.
    ***********************************************selecting data from bsas table using bsis-belnr*******************************************
      LOOP AT it_main INTO wa_main.
        SELECT belnr budat dmbtr xblnr zuonr  augbl blart
               INTO CORRESPONDING FIELDS OF wa_bsas
               FROM bsas
               WHERE belnr = wa_main-augbl
               AND   blart = 'KZ'.
        ENDSELECT.
        APPEND wa_bsas TO it_bsas.
      ENDLOOP.
    ********************************************combining two tables data******************************************************************
      LOOP AT it_main INTO wa_main.
        t_tabix = sy-tabix.
           wa_main-slno     = t_tabix.
        READ TABLE it_bsas INTO wa_bsas WITH KEY augbl = wa_main-augbl.
        IF sy-subrc = 0.
          SELECT SINGLE name1
                 FROM lfa1
                 INTO ven_name
                 WHERE lifnr = wa_bsas-zuonr.
          wa_main-kz_dmbtr = wa_bsas-dmbtr.
          wa_main-kz_belnr = wa_bsas-belnr.
          wa_main-kz_blart = wa_bsas-blart.
          wa_main-kz_budat = wa_bsas-budat.
          wa_main-kz_xblnr = wa_bsas-xblnr.
          wa_main-kz_zuonr = wa_bsas-zuonr.
          wa_main-name1    = ven_name.
        ENDIF.
        MODIFY it_main FROM wa_main INDEX t_tabix TRANSPORTING kz_dmbtr kz_belnr kz_budat kz_blart kz_xblnr kz_zuonr name1 .
      ENDLOOP.
      SORT it_main BY kz_blart kz_zuonr.
      LOOP AT it_main INTO wa_main.
        wa_main-slno = sy-tabix.
        MODIFY it_main FROM wa_main INDEX sy-tabix TRANSPORTING slno.
      ENDLOOP.
    ENDFORM.                    " data_retreval
    *&      Form  build_catalog
          text
    -->  p1        text
    <--  p2        text
    FORM build_catalog .
      DATA: col_pos TYPE i.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'SLNO'.
      fieldcatalog-seltext_m = 'Serial No'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_ZUONR'.
      fieldcatalog-seltext_m = 'Vendor Num'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'NAME1'.
      fieldcatalog-seltext_m = 'Vendor Name'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'BLART'.
      fieldcatalog-seltext_m = 'BillDoc.Type'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'BELNR'.
      fieldcatalog-seltext_m = 'BillDoc.Num.'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'BUDAT'.
      fieldcatalog-seltext_m = 'BillPosting Date'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'XBLNR'.
      fieldcatalog-seltext_m = 'BillReference Num'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'DMBTR'.
      fieldcatalog-seltext_m = 'Bill Amount'.
      fieldcatalog-col_pos   = col_pos.
      fieldcatalog-do_sum    = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_BLART'.
      fieldcatalog-seltext_m = 'Pay_Doc.type'.
      fieldcatalog-col_pos   = col_pos.
       fieldcatalog-do_sum    = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_BELNR'.
      fieldcatalog-seltext_m = 'Pay_Document No'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_DMBTR'.
      fieldcatalog-seltext_m = 'Payment Amount'.
      fieldcatalog-col_pos   = col_pos.
      fieldcatalog-do_sum    = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_XBLNR'.
      fieldcatalog-seltext_m = 'Pay_Reference Num'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'KZ_BUDAT'.
      fieldcatalog-seltext_m = 'Pay_Posting Date'.
      fieldcatalog-col_pos   = col_pos.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
      col_pos = col_pos + 1.
      fieldcatalog-fieldname = 'AUGBL'.
      fieldcatalog-seltext_m = 'Clr.Doc.Num'.
      fieldcatalog-col_pos   = col_pos.
       fieldcatalog-row_pos   = 2.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR: fieldcatalog.
    ENDFORM.                    " build_catalog
    *&      Form  sortinfo
          text
    -->  p1        text
    <--  p2        text
    FORM sortinfo .
      DATA: is_sort TYPE slis_sortinfo_alv.
      CLEAR:is_sort.
      is_sort-spos       = 2.
      is_sort-fieldname  = 'KZ_ZUONR'.
      is_sort-up         = 'X'.
      APPEND is_sort TO it_sort.
      CLEAR: is_sort.
      is_sort-spos       = 1.
      is_sort-fieldname  = 'KZ_BLART'.
      is_sort-up         = 'X'.
      is_sort-subtot     = 'X'.
      APPEND is_sort TO it_sort.
    ENDFORM.                    " sortinfo
    *&      Form  layout
          text
    -->  p1        text
    <--  p2        text
    FORM layout .
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-zebra             = 'X'.
    *gd_layout-totals_text       = 'Grand Total'.
    *gd_layout-subtotals_text    = 'BillBooked Not Paid'.
    ENDFORM.                    " layout
    *&      Form  display_alv
          text
    -->  p1        text
    <--  p2        text
    FORM display_alv .
      i_prg = sy-repid.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
         i_callback_program                = 'I_PRG'
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE'
      I_CALLBACK_HTML_TOP_OF_PAGE       = 'TOP-OF-PAGE'
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
         is_layout                         = gd_layout
         it_fieldcat                       = fieldcatalog[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
         it_sort                           = it_sort
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
         it_events                         = gt_events
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = it_main
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " display_alv
    *&      Form  build_events
          text
    -->  p1        text
    <--  p2        text
    FORM build_events .
      DATA: is_event TYPE slis_alv_event.
    break-point.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         i_list_type           = 0
       IMPORTING
         et_events             = gt_events[]
      EXCEPTIONS
        LIST_TYPE_WRONG       = 1
        OTHERS                = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE gt_events WITH KEY name = slis_ev_top_of_page INTO is_event.
      IF sy-subrc = 0.
        MOVE 'TOP_OF_PAGE' TO is_event-form.
       MODIFY gt_events from is_event TRANSPORTING form WHERE name = slis_ev_top_of_page.
      ENDIF.
    ENDFORM.                    " build_events
    *&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    form top_of_page .
        BREAK-POINT.
        SKIP 3.
        WRITE:/20 'BILLING DETAILS', 40 'PAYMENT DETAILS'.
    endform.                    " top_of_page
    Regards.
    s.senthil kumar

    hi i modified ur program , check this and let me know
    REPORT zsen_servicetax_gta NO STANDARD PAGE HEADING LINE-COUNT 100.
    *****************************************TABLES USED**********************************************************************
    TABLES: BSIS, "Accounting: Secondary Index for G/L Accounts
    BSAS, "Accounting: Secondary Index for G/L Accounts (Cleared Items)
    LFA1. "Vendor Master (General Section).
    *****************************************WORK AREA / INTERNAL TABLE DECLARATION******************************************
    TYPE-POOLS: slis.
    TYPES: BEGIN OF ty_main,
    hkont TYPE bsis-hkont,
    belnr TYPE bsis-belnr,
    budat TYPE bsis-budat,
    blart TYPE bsis-blart,
    dmbtr TYPE bsis-dmbtr,
    xblnr TYPE bsis-xblnr,
    shkzg TYPE bsis-shkzg,
    augbl TYPE bsis-augbl,
    kz_dmbtr TYPE bsis-dmbtr,
    kz_xblnr TYPE bsis-xblnr,
    kz_blart TYPE bsis-blart,
    kz_belnr TYPE bsis-belnr,
    kz_budat TYPE bsis-budat,
    kz_zuonr TYPE bsis-zuonr,
    name1 TYPE lfa1-name1,
    slno TYPE i,
    END OF ty_main,
    BEGIN OF ty_bsas,
    belnr TYPE bsas-hkont,
    budat TYPE bsas-budat,
    xblnr TYPE bsas-xblnr,
    augbl TYPE bsas-augbl,
    dmbtr TYPE bsas-dmbtr,
    blart TYPE bsas-blart,
    zuonr TYPE bsas-zuonr,
    END OF ty_bsas.
    DATA: it_main TYPE TABLE OF ty_main,
    wa_main LIKE LINE OF it_main,
    it_bsas TYPE TABLE OF ty_bsas,
    wa_bsas LIKE LINE OF it_bsas.
    DATA: it_sort TYPE slis_t_sortinfo_alv,
    IT_fieldcatalog TYPE slis_t_fieldcat_alv ,
    WA_fieldcatalog TYPE slis_fieldcat_alv,
    gd_layout TYPE slis_layout_alv,
    gt_events TYPE slis_t_event,
    WA_EVENTS TYPE SLIS_T_EVENT,
    int_fcat TYPE slis_fieldcat_alv,
    it_header TYPE slis_t_listheader,
    wa_header TYPE slis_listheader.
    ************************************************work variables***********************************************************************
    DATA: ven_name TYPE lfa1-name1,
    post_date TYPE bsis-budat,
    t_tabix TYPE sy-tabix,
    i_prg LIKE sy-repid.
    ***********************************************selection screen***********************************************************************
    SELECTION-SCREEN: BEGIN OF BLOCK gtn WITH FRAME TITLE text-001 .
    SELECT-OPTIONS: date FOR BSIS-BUDAT .
    SELECTION-SCREEN: END OF BLOCK gtn.
    ************************************************data selection**************************************************************************
    START-OF-SELECTION.
    PERFORM data_retreval.
    PERFORM build_catalog.
    PERFORM layout.
    PERFORM build_events.
    PERFORM sortinfo.
    IF it_main[] IS NOT INITIAL.
    PERFORM display_alv.
    ELSE.
    MESSAGE 'No Records Matching For This Selection' TYPE 'E'.
    ENDIF.
    ******************************data display*********************************************************************************************
    **& Form data_retreval
    *text
    *--> p1 text
    *<-- p2 text
    FORM data_retreval .
    CLEAR:it_main[], wa_main.
    ***********************************************selecting data from bsis table for the given date range**********************************
    SELECT ahkont abelnr abudat ablart admbtr axblnr a~shkzg
    b~augbl
    INTO CORRESPONDING FIELDS OF TABLE it_main
    FROM bsis AS a LEFT OUTER JOIN bsas AS b
    ON abelnr = bbelnr
    WHERE a~budat IN date.
    *AND a~blart = 'KR'
    *AND a~shkzg = 'S'
    *AND a~hkont = '0002200530'.
    ***********************************************selecting data from bsas table using bsis-belnr*******************************************
    LOOP AT it_main INTO wa_main.
    SELECT belnr budat dmbtr xblnr zuonr augbl blart
    INTO CORRESPONDING FIELDS OF wa_bsas
    FROM bsas
    WHERE belnr = wa_main-augbl
    AND blart = 'KZ'.
    ENDSELECT.
    APPEND wa_bsas TO it_bsas.
    ENDLOOP.
    ********************************************combining two tables data******************************************************************
    LOOP AT it_main INTO wa_main.
    t_tabix = sy-tabix.
    wa_main-slno = t_tabix.
    READ TABLE it_bsas INTO wa_bsas WITH KEY augbl = wa_main-augbl.
    IF sy-subrc = 0.
    SELECT SINGLE name1
    FROM lfa1
    INTO ven_name
    WHERE lifnr = wa_bsas-zuonr.
    wa_main-kz_dmbtr = wa_bsas-dmbtr.
    wa_main-kz_belnr = wa_bsas-belnr.
    wa_main-kz_blart = wa_bsas-blart.
    wa_main-kz_budat = wa_bsas-budat.
    wa_main-kz_xblnr = wa_bsas-xblnr.
    wa_main-kz_zuonr = wa_bsas-zuonr.
    wa_main-name1 = ven_name.
    ENDIF.
    MODIFY it_main FROM wa_main INDEX t_tabix TRANSPORTING kz_dmbtr kz_belnr kz_budat kz_blart kz_xblnr kz_zuonr name1 .
    ENDLOOP.
    SORT it_main BY kz_blart kz_zuonr.
    LOOP AT it_main INTO wa_main.
    wa_main-slno = sy-tabix.
    MODIFY it_main FROM wa_main INDEX sy-tabix TRANSPORTING slno.
    ENDLOOP.
    ENDFORM. " data_retreval
    **& Form build_catalog
    *text
    *--> p1 text
    *<-- p2 text
    FORM build_catalog .
    DATA: col_pos TYPE i.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'SLNO'.
    WA_fieldcatalog-seltext_m = 'Serial No'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_ZUONR'.
    WA_fieldcatalog-seltext_m = 'Vendor Num'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'NAME1'.
    WA_fieldcatalog-seltext_m = 'Vendor Name'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'BLART'.
    WA_fieldcatalog-seltext_m = 'BillDoc.Type'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'BELNR'.
    WA_fieldcatalog-seltext_m = 'BillDoc.Num.'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'BUDAT'.
    WA_fieldcatalog-seltext_m = 'BillPosting Date'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'XBLNR'.
    WA_fieldcatalog-seltext_m = 'BillReference Num'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'DMBTR'.
    WA_fieldcatalog-seltext_m = 'Bill Amount'.
    WA_fieldcatalog-col_pos = col_pos.
    WA_fieldcatalog-do_sum = 'X'.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_BLART'.
    WA_fieldcatalog-seltext_m = 'Pay_Doc.type'.
    WA_fieldcatalog-col_pos = col_pos.
    WA_fieldcatalog-do_sum = 'X'.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_BELNR'.
    WA_fieldcatalog-seltext_m = 'Pay_Document No'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_DMBTR'.
    WA_fieldcatalog-seltext_m = 'Payment Amount'.
    WA_fieldcatalog-col_pos = col_pos.
    WA_fieldcatalog-do_sum = 'X'.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_XBLNR'.
    WA_fieldcatalog-seltext_m = 'Pay_Reference Num'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'KZ_BUDAT'.
    WA_fieldcatalog-seltext_m = 'Pay_Posting Date'.
    WA_fieldcatalog-col_pos = col_pos.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    col_pos = col_pos + 1.
    WA_fieldcatalog-fieldname = 'AUGBL'.
    WA_fieldcatalog-seltext_m = 'Clr.Doc.Num'.
    WA_fieldcatalog-col_pos = col_pos.
    WA_fieldcatalog-row_pos = 2.
    APPEND WA_fieldcatalog TO IT_fieldcatalog.
    CLEAR: WA_fieldcatalog.
    ENDFORM. " build_catalog
    **& Form sortinfo
    *text
    *--> p1 text
    *<-- p2 text
    FORM sortinfo .
    DATA: is_sort TYPE slis_sortinfo_alv.
    CLEAR:is_sort.
    is_sort-spos = 2.
    is_sort-fieldname = 'KZ_ZUONR'.
    is_sort-up = 'X'.
    APPEND is_sort TO it_sort.
    CLEAR: is_sort.
    is_sort-spos = 1.
    is_sort-fieldname = 'KZ_BLART'.
    is_sort-up = 'X'.
    is_sort-subtot = 'X'.
    APPEND is_sort TO it_sort.
    ENDFORM. " sortinfo
    **& Form layout
    *text
    *--> p1 text
    *<-- p2 text
    FORM layout .
    gd_layout-no_input = 'X'.
    gd_layout-colwidth_optimize = 'X'.
    gd_layout-zebra = 'X'.
    *gd_layout-totals_text = 'Grand Total'.
    *gd_layout-subtotals_text = 'BillBooked Not Paid'.
    ENDFORM. " layout
    **& Form display_alv
    *text
    *--> p1 text
    *<-- p2 text
    FORM display_alv .
    i_prg = sy-repid.
    DATA:it_events TYPE slis_t_event,
           wa_events TYPE slis_alv_event.
    WA_events-name = 'TOP_OF_PAGE'.
      WA_events-form = 'TOP_OF_PAGE'.
      APPEND  wa_events TO it_events.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *I_INTERFACE_CHECK = ' '
    *I_BYPASSING_BUFFER = ' '
    *I_BUFFER_ACTIVE = ' '
    i_callback_program = 'I_PRG'
    *I_CALLBACK_PF_STATUS_SET = ' '
    *I_CALLBACK_USER_COMMAND = ' '
    I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
    *I_CALLBACK_HTML_TOP_OF_PAGE = 'TOP-OF-PAGE'
    *I_CALLBACK_HTML_END_OF_LIST = ' '
    *I_STRUCTURE_NAME =
    *I_BACKGROUND_ID = ' '
    *I_GRID_TITLE =
    *I_GRID_SETTINGS =
    is_layout = gd_layout
    it_fieldcat = IT_fieldcatalog[]
    *IT_EXCLUDING =
    *IT_SPECIAL_GROUPS =
    *it_sort = it_sort
    *IT_FILTER =
    *IS_SEL_HIDE =
    *I_DEFAULT = 'X'
    *I_SAVE = ' '
    *IS_VARIANT =
    it_events = It_events.
    *IT_EVENT_EXIT =
    *IS_PRINT =
    *IS_REPREP_ID =
    *I_SCREEN_START_COLUMN = 0
    *I_SCREEN_START_LINE = 0
    *I_SCREEN_END_COLUMN = 0
    *I_SCREEN_END_LINE = 0
    *I_HTML_HEIGHT_TOP = 0
    *I_HTML_HEIGHT_END = 0
    *IT_ALV_GRAPHICS =
    *IT_HYPERLINK =
    *IT_ADD_FIELDCAT =
    *IT_EXCEPT_QINFO =
    *IR_SALV_FULLSCREEN_ADAPTER =
    *IMPORTING
    *E_EXIT_CAUSED_BY_CALLER =
    *ES_EXIT_CAUSED_BY_USER =
    *TABLES
    *t_outtab = it_main
    *EXCEPTIONS
    *PROGRAM_ERROR = 1
    *OTHERS = 2
    *IF sy-subrc <> 0.
    *MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    ENDFORM. " display_alv
    **& Form build_events
    *text
    *--> p1 text
    *<-- p2 text
    FORM build_events .
    DATA: is_event TYPE slis_alv_event.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    i_list_type = 0
    IMPORTING
    et_events = gt_events[]
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2
    IF sy-subrc NE 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    READ TABLE gt_events WITH KEY name = slis_ev_top_of_page INTO is_event.
    IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO is_event-form.
    MODIFY gt_events from is_event TRANSPORTING form WHERE name = slis_ev_top_of_page.
    ENDIF.
    ENDFORM. " build_events
    **& Form top_of_page
    *text
    *--> p1 text
    *<-- p2 text
    form top_of_page .
    SKIP 3.
    WRITE:/20 'BILLING DETAILS', 40 'PAYMENT DETAILS'.
    ENDFORM.
    reward points if useful,
    venkat.

  • Second page not triggering in SAP script

    plz help me in this too
    The code below is for two pages.
    Problem is that...My second page is not triggering.
    In the layout
    for Fist page
    attributes.
    page: FIRST
    next page: SECOND
    for second page
    attributes.
    page:SECOND
    next page: SECOND
    REPORT ZNEW1 .
    TABLES: MARA.
    DATA: BEGIN OF ITAB OCCURS 0,
    MATNR LIKE MARA-MATNR,
    ERSDA LIKE MARA-ERSDA,
    ERNAM LIKE MARA-ERNAM,
    LAEDA LIKE MARA-LAEDA,
    END OF ITAB.
    SELECT * FROM MARA INTO CORRESPONDING FIELDS OF table ITAB
    WHERE VPSTA = 'K'.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    *DEVICE = ' '
    DIALOG = 'X'
    FORM = 'ZNEWLAY1'
    LANGUAGE = SY-LANGU
    EXCEPTIONS
    OTHERS = 1.
    call function 'START_FORM'
    EXPORTING
    FORM = 'ZNEWLAY1'
    LANGUAGE = ' '
    STARTPAGE = 'FIRST'
    PROGRAM = ' '
    MAIL_APPL_OBJECT =
    IMPORTING
    LANGUAGE =
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'HEADER'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    WINDOW = 'HEADER'
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.
    call function 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'LOGO'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    WINDOW = 'LOGO'
    EXCEPTIONS
    UNOPENED = 4
    OTHERS = 9.
    LOOP AT ITAB.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'MAIN'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    WINDOW = 'MAIN'
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2
    ENDLOOP.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'FOOTER'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    WINDOW = 'FOOTER'
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.
    call function 'END_FORM'
    EXCEPTIONS
    UNOPENED = 1
    BAD_PAGEFORMAT_FOR_PRINT = 2
    OTHERS = 3.
    call function 'START_FORM'
    EXPORTING
    ARCHIVE_INDEX =
    FORM = 'ZNEWLAY1'
    LANGUAGE = ' '
    STARTPAGE = 'SECOND'
    PROGRAM = ' '
    MAIL_APPL_OBJECT =
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.
    call function 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'MAIN'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    WINDOW = 'MAIN'
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.
    call function 'END_FORM'
    EXCEPTIONS
    UNOPENED = 1
    BAD_PAGEFORMAT_FOR_PRINT = 2
    OTHERS = 3.
    CALL FUNCTION 'CLOSE_FORM'
    EXCEPTIONS
    UNOPENED = 1
    OTHERS = 2.

    Hi Scientila Choudary,
           Your problem will be cleared once you remove start_form and end_form as these are not necessary.we have to use start_from and end_from when we are operating on different forms.Presently we are operating on only no need to use this.
           Once your problem is solved please close this.

  • Unable to generate ADDM snapshot reports as the error_count is 1

    Hi,
    my db is on 10.1.0.2 windows 2003 server.
    errors while generating ADDM snapshots, was schedule for every 15 minutes,
    the error_count is 1 from dba_hist_snap, these errors are continous and generates a trace file on m000_no
    *** ACTION NAME:(Auto-Flush Slave Action) 2007-10-26 11:15:46.171
    *** MODULE NAME:(MMON_SLAVE) 2007-10-26 11:15:46.171
    *** SERVICE NAME:(SYS$BACKGROUND) 2007-10-26 11:15:46.171
    *** SESSION ID:(564.28596) 2007-10-26 11:15:46.171
    *** KEWROCISTMTEXEC - encountered error: (ORA-00001: unique constraint (SYS.WRH$_SQLBIND_PK) violated
    *** SQLSTR: total-len=701, dump-len=240,
    STR={insert into wrh$_sqlbind   (snap_id, dbid, instance_number,    sql_id, child_number, name, position, dup_position,    datatype, datatype_string, character_sid,    precision, scale, max_length, was_captured,    last_captured, value_string, v}
    *** KEWRAFM1: Error=13509 encountered by kewrfteh;
    any suggestions what should be done, i need an immediate solution to stop these errors happening, i am unable to generate a snapshot report .

    Rajesh,
    your URLs are not viewable for most of the forum users, as they are in the Oracle Intranet. Better you use the internal help list for this question.
    Regards
    Rainer

  • THE END OF THE RECORD IS NOT TRIGGERING(urgent)

    HI ALL I HAVE WRITTEN A REPORT AND I AM DISPLAYING THE OUTPUT OF EACH DISTRICT..
    NOW THE REPORT IS SHOWING RIGHT WHEN IT IS CHANGING THE DISTRICT BUT IT IS NOT TRIGGERING AT THE END OF THE REPORT AS AFTER THAT THE DISTRICT IS NOT CHANGING..
    I TRIED WITH AT END OF BUT IT IS SOME HOW SHOWING PROBLEM SO I USED A VARIBLE CONCEPT TO GET THE REPORT....
    HERE IS THE REPORT  can anyone please look at this and let me know how can i do that..
    is there any method where i can used in the IF condition to get the last record...
    ==========================================================
    *& Report  ZDISTRICT_CUST_AUCSALES
    &--THE PROGRAM USED TO DISPLAY THE TOTAL NUMBER OF CONSUMER IN A D.C.-
    &----PROCESSED ON A PERTICULAR MONTH AND YEAR..--
    REPORT  ZDISTRICT_CUST_AUCSALES .
    *TABLE DECLARATION*****************************************************
    TABLES: /BIC/AUCSALES00,
            /BIC/TCOKEY.
    *DATA DECLARATION*****************************************************
    DATA:  BEGIN OF ITAB OCCURS 0,
           /BIC/COKEY   LIKE /BIC/TCOKEY-/BIC/COKEY,
           TXTSH        LIKE /BIC/TCOKEY-TXTSH,
           END OF ITAB.
    DATA:  BEGIN OF ITAB2 OCCURS 0,
           BILL_DATE    LIKE /BIC/AUCSALES00-BILL_DATE,
           /BIC/COKEY   LIKE /BIC/AUCSALES00-/BIC/COKEY,
           BPARTNER     LIKE /BIC/AUCSALES00-BPARTNER,
           END OF ITAB2.
    DATA:  COUNT        TYPE I,
           COKEY        TYPE I,
           COKEYNO(2)   TYPE C,
           COKEYCH(2),
           BILDT        TYPE I,
           PROCOKEY     TYPE I,
           NOTPROCOKEY  TYPE I,
           TOTCOKEYDIV  TYPE I,
           TOTCOKEYDIV1 TYPE I,
           TOTCOKEYDIV2 TYPE I,
           TOTAL        TYPE I.
    DATA: C TYPE I VALUE 4.
    SELECT OPTION FOR DATE SELECTION IN THE SELECTION SCREEN.************
    SELECTION-SCREEN BEGIN OF BLOCK DATE WITH FRAME TITLE TEXT-001.
    PARAMETERS: S_BILDT LIKE /BIC/AUCSALES00-BILL_DATE OBLIGATORY .
    SELECTION-SCREEN END OF BLOCK DATE.
    *INITIALIZATION******************************************************
    FORMAT INTENSIFIED ON COLOR = C.
    write:/  'PROCESSING DATE:',    20 S_BILDT,
         128 'TIME:',              135 SY-UZEIT.
    WRITE:/  'USER NAME      :',    20 SY-UNAME,
         142 ' '.
    WRITE SY-ULINE.
    WRITE: / 'D.C'                , 12 SY-VLINE,
             'NAME OF D.C'        , 39 SY-VLINE,
             'NUMBER OF CONSUMER' , 60 SY-VLINE,
             'REMARKS'            , 105 SY-VLINE.
    WRITE:/ SY-ULINE.
    FORMAT INTENSIFIED OFF.
    *AT SELECTION-SCREEN**************************************************
    SELECT BILL_DATE
          UP TO 1 ROWS
          INTO (/BIC/AUCSALES00-BILL_DATE)
          FROM /BIC/AUCSALES00
          WHERE BILL_DATE = S_BILDT.
    ENDSELECT.
    IF SY-SUBRC <> 0.
      WRITE:/ ' NO DATA FOUND ON THIS DATE'.
      EXIT.
    ENDIF.
    START OF  SELECTION***************************************************
    SELECT /BIC/COKEY TXTSH from /BIC/TCOKEY into table itab.
    SORT ITAB.
    IF NOT ITAB[] IS INITIAL.
      SELECT  BILL_DATE
              /BIC/COKEY
              BPARTNER
              FROM /BIC/AUCSALES00
              INTO CORRESPONDING FIELDS OF TABLE ITAB2
              FOR ALL ENTRIES IN ITAB
              WHERE /BIC/COKEY = ITAB-/BIC/COKEY
              AND BILL_DATE = S_BILDT.
      SORT ITAB BY /BIC/COKEY.
    ENDIF.
    *CHECK WHETHER THE DATA RETRIVE SUCESSFULLY OR NOT********************
    IF SY-SUBRC NE 0.
      WRITE:/ 'THIS DATE DOESNOT CONTAIN ANY DATA'.
    ENDIF.
    *DATA DISPLAY*********************************************************
    *****GET THE FIRST VALUE AND DELETE THE ADJECENT AND DUPLICATE FROM ITAB2.
    READ TABLE ITAB INDEX 1.
       IF SY-SUBRC = 0.
          COKEYNO = ITAB-/BIC/COKEY+4(2).
       ENDIF.
    READ TABLE ITAB2 WITH KEY /BIC/COKEY = itab-/BIC/COKEY.
       IF SY-SUBRC = 0.
          SORT ITAB2 BY /BIC/COKEY.
          DELETE ADJACENT DUPLICATES FROM ITAB2 COMPARING /BIC/COKEY.
       ENDIF.
    LOOP AT ITAB.
      READ TABLE ITAB2 WITH KEY /BIC/COKEY = itab-/BIC/COKEY.
    *IF THE D.C ARE NOT SAME THEN DISPLAY THE SUM***************************
      COKEYCH = ITAB-/BIC/COKEY+4(2).
      IF (  COKEYCH <> COKEYNO ).
          FORMAT COLOR = 4.
            WRITE:/ '  TOTAL NUMBER OF  D.C  IN   PERTICULAR RAO  ','(', COKEYNO,')','=',TOTCOKEYDIV.
            WRITE:/ '  TOTAL NUMBER OF CONSUMER PROCESSED IN RAO  ','(', COKEYNO,')','=',TOTAL.
            WRITE:/ '  TOTAL NUMBER OF D.C   PROCESSED    IN RAO  ','(', COKEYNO,')','=',PROCOKEY.
            WRITE:/ '  TOTAL NUMBER OF D.C  NOT PROCESSED IN RAO  ','(', COKEYNO,')','=',NOTPROCOKEY.
            WRITE:/ '', 128 'PAGE NUMBER:',   139 SY-PAGNO.
            SKIP 4.
    *******INITIALLIZE ALL THE VARIABLE*************************************
            FORMAT COLOR OFF .
            TOTCOKEYDIV = 0.
            TOTCOKEYDIV1 = 0.
            TOTCOKEYDIV2 = 0.
            TOTAL = 0.
            PROCOKEY = 0.
            NOTPROCOKEY = 0.
            WRITE:/ SY-ULINE.
            NEW-PAGE WITH-TITLE.
            NEW-PAGE WITH-HEADING.
    ENDIF.
    **END OF THE TOTAL SUM OF ALL THE D.C.**********************************
    *IF THE D.C ARE SAME THEN DISPLAY THE D.C.******************************
      IF ITAB2-/BIC/COKEY = ITAB-/BIC/COKEY.
             SELECT COUNT( DISTINCT BPARTNER )
                   INTO COUNT
                   FROM /BIC/AUCSALES00
                   WHERE /BIC/COKEY = ITAB2-/BIC/COKEY and
                   BILL_DATE = S_BILDT.
            IF SY-SUBRC = 0.
                 PROCOKEY = PROCOKEY + 1.
            ENDIF.
              TOTCOKEYDIV1 = TOTCOKEYDIV1 + 1.
              TOTAL = TOTAL + COUNT.
              COKEY = ITAB2-/BIC/COKEY.
              FORMAT INTENSIFIED ON COLOR = 2.
              WRITE:/ ITAB2-/BIC/COKEY,             SY-VLINE,
                   15 ITAB-TXTSH+1(19),         39  SY-VLINE,
                   40 COUNT,                    60  SY-VLINE,
                      ' ',                     105  SY-VLINE.
             WRITE :/ SY-ULINE.
             FORMAT INTENSIFIED ON COLOR = 2.
      ELSE.
           FORMAT INTENSIFIED ON COLOR = 2.
           COKEY = ITAB-/BIC/COKEY.
           WRITE:/ ITAB-/BIC/COKEY,               SY-VLINE,
                15 ITAB-TXTSH+1(19),           39 SY-VLINE,
                40  ' ',                       60 SY-VLINE,
                'Data Not extracted to BW',   105 SY-VLINE.
           FORMAT INTENSIFIED ON COLOR = 2.
           WRITE:/ SY-ULINE.
           TOTCOKEYDIV2 = TOTCOKEYDIV2 + 1.
      ENDIF.
          TOTCOKEYDIV = TOTCOKEYDIV1 + TOTCOKEYDIV2.
          NOTPROCOKEY = TOTCOKEYDIV - PROCOKEY.
          COKEYNO = ITAB-/BIC/COKEY+4(2).
          CLEAR: ITAB, ITAB2.
    ENDLOOP.
    ===========================================================
    please at this and let me know..
    thanks in advance,,,

    HI ALL ,
         I GOT THE ANSWER...
    THANKS TO SDNNNN AND ALL THE FRIENDS LOOKING AT THIS...
    THANKS ONCE AGAIN....

  • SkillBuilders modal plugin - Reports will not refresh

    Hi all,
    I'm attempting to use the SkillBuilders Modal Page 2.0.0 plugin, everything seems to work except the refreshing of the reports. When clicking on the links the modal page opens, I can make changes, and after clicking on "apply changes" the modal box closes and I am back at the originating page, however the reports have not refreshed. If I manually refresh the page or the reports - the reports change as expected. I believe my problem is in the Auto Close Dynamic action, but I can't seem to find it. There isn't any errors displayed in the error console either. Any suggestions? Thanks in advance
    SkilBuilders Modal Page 2.0.0 plugin
    Apex version 4.2.1.00.08
    Theme 26 - Productivity Applications
    Page has 3 reports - 2 classic and 1 IR.
    Each report has a link with the class "edit-link"
    Dynamic action (Edit Clicked) is set up with:
    Event: click
    Selection Type: jQuery Selector
    jQuery Selector: a.edit-link
    Condition: No Condition
    Event Scope: Static
    True Actions settings are:
    URL Location: Attribute of Triggering Element
    Attribute Name: href
    Auto-close On Element Selector: section#uSuccessMessage
    Dynamic action (Modal Page Auto Close) is set up with:
    Event: Auto Close [SkillBuilders Modal Page (2.0.0)]
    Selection Type: DOM Object
    DOM Object: document
    Condition: No Condition
    Event Scope: Static
    3 True Actions settings are:
    Action: Refresh
    Selection Type: Region
    Region: "Name of Region"
    Thanks
    Wayne

    Hi Wayne,
    You've got a job on trying to refresh a classic report using the standard dynamic action, it's not as straightforward as simply selecting the region.
    The fastest way to achieve this (unless you MUST have AJAX refreshing of reports) is to change the action of the Auto Close event to Submit Page.
    It's quick and dirty - but it works.
    Hope this helps, cheers, Pete

  • Report is not displayed on the browser

    We have a 9iAs Oracle application(built in developer6i(forms and reports) patch12).The database version is Oracle 9.2.0.6.0.My problem is I have a report that is called from the form. If the print_receipt = 'Y', display the report.I have also an afterreport trigger that updates this print_receipt to 'N'.Somehow the afterreport trigger fires before the report is display thus giving a blank pdf output on the browser.My user has new pc and new operating system, Windows XP but they're still using Novell Netware for signing on to the network. Before she does not have any problem displaying the report, she was using Windows NT4 and Novell Netware for signing on to the network.Is there any limitations in Windows XP that interferes with the report? Is this known problem in report's afterreport triggers?Is there a workaround here so the report can be displayed?Thanks for the help.

    Hi,
    Try this may be it will help.
    Go to Iexplorer property - settings - Change (Check for newer version of stored pages to Automatically.
    This error is coming because the report runs twice, so the after report trigger is fired before anything is displyed & hance your report is not displayed.
    Thanks,
    Awadh

  • After Installing SQL Server 2012 Service Pack the RDL reports do not work

    I installed SQL Server 2012 Service Pack on backEnd sharepoint and also on BI Server that host Reporting Service.(Before installation everything was working properly)
    After this installation the RDL reports do not open and I receive this error message.
    The permissions granted to user 'domain\username' are insufficient for performing this operation. (rsAccessDenied)
    I also receive the same error message on changing DataSource, Parameters and subscription.
    I should mention that, I am using Reporting Services in the Integration Mode. I want to open and modify RDL reports from SharePoint and inside the SharePoint Document Library.

    Hi Hedayat,
    Thanks for posting your issue,
    To solve this problem you have to grant your SQL Reporting Service Application Pool
    Account (whatever is running your SQL Service Application, see Central Admin -> Manage Service Application -> SQL Server Reporting Services)
    Full Control to the web application that report is being deployed to in your particular case.
    Or you could just use the powershell command below:
    $webApp = Get-SPWebApplication –Identity http://yoursharepointapp 
    $webApp.GrantAccessToProcessIdentity(“domain\SSRSAccount”) 
    Also, check out below mentioned URLs for more details and fixes of this issue
    http://paulliebrand.com/2013/09/25/ssrs-and-permissions-granted-to-user-are-insufficient-for-performing-this-operation/
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ea477ec-ea12-4a3e-bc33-2fcf9d52b84e/error-rsaccessdenied-nt-authoritynetwork-service-are-insufficient?forum=sqlreportingservices
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Top-of-page event is not triggered

    Hi,
    I have a problem with top-of-page event. I have a report that shows the results in ALV grid display. But I use "REUSE_ALV_GRID_DISPLAY" not OO alv and there is only one screen with number 1000. On the menu toolbar there is a button that prints the data of ALV in a list using "write" statement. While writing , "top of page" event is not triggered. I expect that it is triggered at the first "write" statement but isn't. Is there anyone who knows the cause of this problem?
    The code is below.
    Thanks.
    Tables ...
    TABLES : mara , makt , ekko , ekpo , zzith_yukh , lfa1 , t001w  , lips ,
             eket .
    global variables
    DATA : BEGIN OF list OCCURS 1,
           zztahsk LIKE ekko-zztahsk ,
           zterm LIKE ekko-zterm ,
           txz01 LIKE ekpo-txz01 ,
           name1 LIKE lfa1-name1 ,
           menge LIKE ekpo-menge ,
           meins LIKE ekpo-meins ,
           fyukl LIKE zzith_yukh-zzdel_flag ,
                             " Yüklenmi&#351; miktar var göstergesi ...
           inco1 LIKE ekko-inco1 ,
           netwr LIKE ekpo-netwr ,
           waers LIKE ekko-waers ,
           bedat LIKE ekko-bedat ,
           zzontar LIKE ekko-zzontar ,
           slfdt LIKE eket-slfdt ,
           tname1 LIKE t001w-name1 ,
           banfn LIKE ekpo-banfn ,
           ebeln LIKE ekko-ebeln ,
           ebelp LIKE ekpo-ebelp ,
           lifnr LIKE ekko-lifnr ,
           mtart LIKE mara-mtart ,
           matkl LIKE mara-matkl ,
           ekgrp LIKE ekko-ekgrp ,
           matnr LIKE mara-matnr ,
           eknam  LIKE t024-eknam,
           bukrs  LIKE ekko-bukrs,
           zzbltur LIKE ekko-zzbltur,
           END   OF list         .
    DATA temp  LIKE list OCCURS 1 WITH HEADER LINE .
    DATA total LIKE list OCCURS 1 WITH HEADER LINE .
    ALV fields
    TYPE-POOLS : slis.
    DATA : gt_fields TYPE  slis_fieldcat_alv OCCURS 1 WITH HEADER LINE .
    DATA : gt_events TYPE  slis_t_event.
    DATA : gs_layout TYPE  slis_layout_alv.
    DATA : gv_title  TYPE lvc_title VALUE 'Günlük Depo Say&#305;m Miktarlar&#305;'.
    DATA : gt_top_of_page TYPE slis_t_listheader.
    selection screen
    SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001 .
    *Sat&#305;nalma organizasyonu
    *Sat&#305;nalma grubu
    *Sat&#305;c&#305;
    *Tarih
    *SAS no
    *Dosya no
    SELECT-OPTIONS:
    s_bukrs FOR ekko-bukrs .
    SELECTION-SCREEN SKIP .
    SELECT-OPTIONS:
    s_ekorg FOR  ekko-ekorg OBLIGATORY MEMORY ID eko ,
    s_ekgrp FOR  ekko-ekgrp ,
    s_lifnr FOR  ekko-lifnr ,
    s_ebeln FOR  ekko-ebeln .
    SELECTION-SCREEN END  OF BLOCK a        .
    Define Katalog
    DEFINE fill_catalog .
      gt_fields-fieldname  = &1.
      gt_fields-tabname    = &2.
      gt_fields-seltext_l  = &3.
      gt_fields-seltext_m  = &3.
      gt_fields-seltext_s  = &3.
      gt_fields-checkbox   = &4.
      gt_fields-cfieldname = &5.
      gt_fields-ref_tabname  = &6.
      gt_fields-ref_fieldname  = &7.
      gt_fields-edit       = &8.
      append gt_fields .
      clear gt_fields .
    END-OF-DEFINITION.
    Modify Catalog
    DEFINE modify_catalog .
      gt_fields-seltext_m = &1 .
      modify gt_fields  transporting seltext_m where fieldname = &2 .
    END-OF-DEFINITION     .
    TOP-OF-PAGE.
      write 'top of page'.
      PERFORM top-of-page.
    start-of-selection
    START-OF-SELECTION .
      PERFORM get_data.
      PERFORM listele .
    *&      Form  listele .
    FORM listele .
      PERFORM get_events .
      PERFORM alv_list_header.
      PERFORM get_field_catalog USING 'LIST' .
      PERFORM display_alv    .
    ENDFORM.                    " listele.
    *&      Form  getfield_Catalog
    FORM get_field_catalog  USING p_tabname .
      fill_catalog :
    'EBELN'   'LIST' '' '' '' 'EKPO' 'EBELN'   '' ,
    'ZZTAHSK' 'LIST' '' '' '' 'EKKO' 'ZZTAHSK' '' ,
    'ZZBLTUR' 'LIST' '' '' '' 'EKKO' 'ZZBLTUR' '' ,
    'MATNR'   'LIST' '' '' '' 'MARA' 'MATNR'   '' ,
    'MATKL'   'LIST' '' '' '' 'MARA' 'MATKL'   '' ,
    'TXZ01'   'LIST' '' '' '' 'EKPO' 'TXZ01'   '' ,
    'NAME1'   'LIST' '' '' '' 'LFA1' 'NAME1'   '' ,
    'MENGE'   'LIST' '' '' '' 'EKPO' 'MENGE'   '' ,
    'MEINS'   'LIST' '' '' '' 'EKPO' 'MENGE'   '' ,
    'FYUKL'   'LIST' '' '' '' 'ZZITH_YUKH' 'ZZDEL_FLAG'   '' ,
    'INCO1'   'LIST' '' '' '' 'EKKO' 'INCO1'   '' ,
    'NETWR'   'LIST' '' '' '' 'EKPO' 'NETWR'   '' ,
    'WAERS'   'LIST' '' '' '' 'EKKO' 'WAERS'   '' ,
    'BEDAT'   'LIST' '' '' '' 'EKKO' 'BEDAT'   '' ,
    'ZZONTAR' 'LIST' '' '' '' 'EKKO' 'ZZONTAR' '' ,
    'SLFDT'   'LIST' '' '' '' 'EKET' 'SLFDT'   '' ,
    'TNAME1'  'LIST' '' '' '' 'T001W' 'NAME1'  '' ,
    'BANFN'   'LIST' '' '' '' 'EKPO' 'BANFN'   '' ,
    'EKNAM'   'LIST' '' '' '' 'T024' 'EKNAM'   '' .
      gt_fields-ddictxt = 'M' .
      MODIFY gt_fields  TRANSPORTING ddictxt WHERE fieldname NE space.
      modify_catalog 'Yükleme No'            'VBELN'   .
      modify_catalog 'Malzeme Türü'          'ZZBLTUR' .
      modify_catalog 'Malzeme Tan&#305;m&#305;'        'TXZ01'   .
      modify_catalog 'Sat&#305;c&#305;'                'NAME1'   .
      modify_catalog 'Teslim &#350;ekli'          'INCO1'   .
      modify_catalog 'Döviz Tutar&#305;'          'ZZTOPLAM'.
      modify_catalog 'Döviz Kodu'            'WAERS'   .
      modify_catalog 'Sipari&#351;i Veren'        'TNAME1'  .
      modify_catalog 'Tahmini &#304;thalat Trh.'  'SLFDT'   .
      modify_catalog '&#304;thalata &#304;ntikal Trh.' 'BEDAT'   .
      modify_catalog 'Dosya Onay Tarihi'     'ZZONTAR' .
      modify_catalog 'Talep No'              'BANFN'   .
      modify_catalog 'Dosya Sorumlusu'       'EKNAM'   .
      modify_catalog 'Yük.Göstergesi'        'FYUKL'   .
    ENDFORM.                    " getfield_Catalog
    *&      Form  display_alv
          text
    -->  p1        text
    <--  p2        text
    FORM display_alv .
      DATA lv_repid LIKE sy-repid .
      lv_repid = sy-repid .
      CLEAR gs_layout.
      gs_layout-zebra                 = 'X'.
      gs_layout-colwidth_optimize     = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = lv_repid
          i_callback_pf_status_set = 'SET_PF_STATUS'
          i_callback_user_command  = 'USER_COMMAND'
          is_layout                = gs_layout
          it_fieldcat              = gt_fields[]
          it_events                = gt_events[]
        TABLES
          t_outtab                 = list[].
    ENDFORM.                    " display_alv
    FORM set_pf_status USING  iv_nodisplay TYPE slis_t_extab.
      SET PF-STATUS 'STANDARD' ."excluding iv_nodisplay.
    ENDFORM.                    " SET_PF_STATUS
    FORM user_command  USING iv_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
      CASE iv_ucomm .
        WHEN 'PRINT'  . PERFORM print_data .
      ENDCASE       .
    ENDFORM.                    "USER_COMMAND
    FORM get_events .
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type = 0
        IMPORTING
          et_events   = gt_events.
      READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE 'ALV_TOP_OF_PAGE' TO ls_event-form.
        APPEND ls_event TO gt_events.
      ENDIF.
    ENDFORM.                    " getevents
    FORM alv_list_header .
      DATA: ls_line TYPE slis_listheader.
      CLEAR ls_line.
      ls_line-typ  = 'S'.
      ls_line-key  = 'Sat&#305;nalma Org.:'.
      CONCATENATE s_ekorg-low s_ekorg-high
      INTO ls_line-info SEPARATED BY '/'.
      APPEND ls_line TO gt_top_of_page.
      ls_line-key  = 'Sat&#305;nalma Grubu.:'.
      CONCATENATE s_ekgrp-low s_ekgrp-high
      INTO ls_line-info SEPARATED BY '/'.
      APPEND ls_line TO gt_top_of_page.
      ls_line-key  = 'Sat&#305;c&#305;.:'.
      CONCATENATE s_lifnr-low s_lifnr-high
      INTO ls_line-info SEPARATED BY '/'.
      APPEND ls_line TO gt_top_of_page.
      ls_line-key  = 'SAS No.:'.
      CONCATENATE s_ebeln-low s_ebeln-high
      INTO ls_line-info SEPARATED BY '/'.
      APPEND ls_line TO gt_top_of_page.
    ENDFORM.                    " alv_list_header
    FORM alv_top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = gt_top_of_page.
    ENDFORM.                    "TOP_OF_PAGE
    FORM get_data .
      DATA : BEGIN OF tr ,
              menge LIKE eket-menge ,
              dabmg LIKE eket-dabmg ,
             END OF tr ,
             zzfiilytar LIKE zzith_yukh-zzfiilytar  .
    *- Get data ...
      SELECT *
        INTO CORRESPONDING FIELDS OF TABLE list
        FROM ekpo AS a
       INNER JOIN ekko AS b ON bebeln = aebeln
      WHERE b~ebeln IN s_ebeln AND
            b~bukrs IN s_bukrs AND
            b~loekz EQ space   AND
            b~lifnr IN s_lifnr AND
            b~ekorg IN s_ekorg AND
            b~ekgrp IN s_ekgrp AND
            a~loekz EQ space   AND
            a~elikz EQ space .
      LOOP AT list .
        CLEAR tr .
        SELECT menge dabmg
          INTO tr
          FROM eket
         WHERE ebeln = list-ebeln AND
               ebelp = list-ebelp.
          tr-menge = tr-menge - tr-dabmg .
        ENDSELECT.
        IF tr-menge LE 0 .
          DELETE list .
        ELSE .
          list-menge = tr-menge .
          IF tr-dabmg GT 0 .
            list-fyukl = '*' .
          ENDIF .
          SELECT SINGLE butxt INTO list-tname1 FROM t001
            WHERE bukrs = list-bukrs .
          SELECT SINGLE slfdt INTO list-slfdt FROM eket
          WHERE ebeln = list-ebeln AND
                ebelp = list-ebelp .
          SELECT SINGLE name1 INTO list-name1 FROM lfa1 WHERE lifnr = list-lifnr.
          SELECT SINGLE mtart matkl INTO (list-mtart,list-matkl)
          FROM mara WHERE matnr = list-matnr .
          SELECT SINGLE eknam INTO list-eknam FROM t024 WHERE ekgrp = list-ekgrp .
          MODIFY list .
        ENDIF .
      ENDLOOP      .
    ENDFORM.                    " get_data
    FORM print_data .
      LEAVE TO LIST-PROCESSING .
      NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE 229 .
      SET PF-STATUS SPACE .
    PERFORM top-of-page .
    malzeme türü 1005 ler yazd&#305;r&#305;l&#305;r
      PERFORM yazdir_1005 .
    malzeme türü 1005 olmayanlar yazd&#305;r&#305;l&#305;r
      PERFORM yazdir_ne_1005 .
    Sat&#305;nalama gruplar&#305; bilgisi yazd&#305;r&#305;l&#305;r
      PERFORM yazdir_ekgrp .
    ENDFORM.                    " print_data
    FORM top-of-page .
      WRITE : 'ÜLKER GRUBU KONSOL&#304;DE' .
      WRITE AT 40 'Sevkiyat Bekleyen Malzemeler' COLOR COL_HEADING .
      WRITE :  180 sy-uname , sy-datum , sy-uzeit.
      NEW-LINE .
      ULINE 0(229) .
      WRITE :/2 'Rapor Kodu..............:' , (10) sy-tcode .
      WRITE :/2 'Sat&#305;nalma Organizasyonu.:' , (10) s_ekorg-low, '/', (10) s_ekorg-high .
      WRITE :/2 'Sat&#305;nalma Grubu.........:' , (10) s_ekgrp-low, '/', (10) s_ekgrp-high .
      WRITE :/2 'Sat&#305;c&#305;..................:' , (10) s_lifnr-low, '/', (10) s_lifnr-high .
      WRITE :/2 'Sat&#305;nalma Sipari&#351; No....:' , (10) s_ebeln-low, '/', (10) s_ebeln-high .
      NEW-LINE .
      ULINE 0(229) .
    Ba&#351;l&#305;klar yaz&#305;l&#305;r
      FORMAT COLOR COL_HEADING .
      WRITE :
      /(10) 'SAS NO.' CENTERED,
      (6)  'TAHS&#304;S'  CENTERED,
      (5)  'ÖDEME'   CENTERED,
      (5)  'Bel.T'   CENTERED,
      (25) 'MALZEME' CENTERED,
      (25) 'SATICI' CENTERED,
      (12) 'M&#304;KTAR' CENTERED,
      (3)  'BRM' CENTERED,
      (3)  'G' ,
      (7) 'TES.&#350;K.' CENTERED,
      (16) 'DÖV&#304;Z TUTARI' CENTERED,
      (3)  'DB.' CENTERED,
      (13) '&#304;TH.&#304;NTK.TRH.' CENTERED,
      (13) 'DOSYA ON.TRH.' CENTERED,
      (10) 'TAHM&#304;N.&#304;TH.TRH.' CENTERED,
      (20) 'S&#304;PAR&#304;&#350; VEREN' CENTERED,
      (10) 'TALEP NO.' CENTERED,
      (18) 'DOSYA SORUMLUSU' CENTERED.
      ULINE 0(229) .
      FORMAT RESET .
    ENDFORM.                    " top-of-page
    FORM yazdir_1005 .
      DATA ebeln LIKE list-ebeln  .
      SORT list BY zzbltur matnr .
      temp[] = list[] .
      DELETE temp WHERE mtart <> '1005' .
      LOOP AT list WHERE mtart = '1005' .
        CLEAR list-netwr .
        IF ebeln NE list-ebeln OR ebeln EQ space .
          REFRESH total . CLEAR total .
          ebeln = list-ebeln .
          LOOP AT temp WHERE ebeln = list-ebeln .
            list-netwr = list-netwr + temp-netwr  .
            CLEAR total .
            total-txz01 = '*** TKNK.MLZ. TOPLAMI ****' .
            total-meins = temp-meins .
            total-menge = temp-menge .
            COLLECT total .
          ENDLOOP                               .
          PERFORM write_list USING '1'  .
          LOOP AT total .
            PERFORM write_list USING '2'  .
          ENDLOOP .
          AT END OF zzbltur .
            ULINE 0(229) .
          ENDAT .
        ENDIF .
      ENDLOOP .
    ENDFORM.                    " yazdir_1005
    FORM write_list  USING    flag .
    flag 1 1005 için yazd&#305;rma
    flag 2 ise ara toplam
      IF flag = '1' .
       FORMAT COLOR COL_NORMAL .
        WRITE :
        /(10) list-ebeln ,
         (6)  list-zztahsk,
         (5)  list-zterm,
         (5)  list-zzbltur ,
         (25) list-txz01,
         (25) list-name1,
         (12) list-menge,
         (3)  list-meins,
         (3)  list-fyukl,
         (7)  list-inco1,
         (16) list-netwr,
         (3)  list-waers,
         (13) list-bedat,
         (13) list-zzontar,
         (10) list-slfdt ,
         (20) list-tname1,
         (10) list-banfn ,
         (18) list-eknam .
        FORMAT RESET .
      ELSEIF flag = '2'  .
       FORMAT COLOR COL_TOTAL .
        WRITE :
        /(10) '' ,
         (6)  '' ,
         (5)  '' ,
         (5)  '' ,
         (25) total-txz01,
         (25) '' ,
         (12) total-menge,
         (3)  total-meins,
         (3)  '' ,
         (7)  '' ,
         (16) '' ,
         (3)  '' ,
         (13) '' ,
         (13) '' ,
         (10) '' ,
         (20) '' ,
         (10) '' ,
         (18) '' .
        FORMAT RESET .
      ELSEIF flag = '3'  .
       FORMAT COLOR COL_TOTAL .
        WRITE :
       /(10) '' ,
        (6)  '' ,
        (5)  '' ,
        (5)  '' ,
        (25) total-txz01,
        (25) '' ,
        (12) total-menge,
        (3)  '' ,
        (3)  '' ,
        (7)  '' ,
        (16) total-netwr ,
        (3)  '' ,
        (13) '' ,
        (13) '' ,
        (10) '' ,
        (20) '' ,
        (10) '' ,
        (18) '' .
        FORMAT RESET .
      ENDIF .
    ENDFORM.                    " write_list
    FORM yazdir_ne_1005 .
      DATA matnr LIKE list-matnr .
      SORT list BY zzbltur matkl matnr .
      temp[] = list[] .
      DELETE temp WHERE mtart = '1005' .
      LOOP AT list WHERE mtart <> '1005' .
    Her yeni Malzeme için ara toplam yaz&#305;l&#305;r
        IF matnr NE list-matnr AND matnr NE space .
           REFRESH total . CLEAR total .
    Toplamlar al&#305;n&#305;r
          LOOP AT temp WHERE matnr = matnr .
            CLEAR total .
            total-netwr = temp-netwr  .
            total-menge = temp-menge  .
            total-txz01 =  '***     TOPLAM        ****' .
            COLLECT total .
          ENDLOOP                          .
          LOOP AT total .               .
            PERFORM write_list USING '3'  .
          ENDLOOP                       .
          ULINE 0(229) .
        ENDIF                      .
        PERFORM write_list USING '1'  .
        matnr = list-matnr            .
      ENDLOOP                           .
    Toplamlar al&#305;n&#305;r
      LOOP AT temp WHERE matnr = matnr .
        REFRESH total . CLEAR total .
        total-netwr = temp-netwr  .
        total-menge = temp-menge  .
        total-txz01 =  '***     TOPLAM        ****' .
        COLLECT total .
      ENDLOOP .
      LOOP AT total .
        PERFORM write_list USING '3'  .
      ENDLOOP       .
      ULINE 0(229)  .
    ENDFORM.                    " yazdir_ne_1005
    FORM yazdir_ekgrp .
      DATA: BEGIN OF total OCCURS 1 ,
            eknam LIKE list-eknam   ,
            zzbltur LIKE list-zzbltur ,
            sayi TYPE i ,
            END  OF  total          .
      DATA: BEGIN OF gtotal OCCURS 1 ,
            eknam LIKE list-eknam   ,
            zzbltur LIKE list-zzbltur ,
            sayi TYPE i ,
            END  OF  gtotal          .
      DATA: bltur LIKE zzith_bltur OCCURS 1 WITH HEADER LINE .
      DATA: len TYPE i  .
      DATA: wa LIKE total.
      REFRESH temp .
      SELECT * INTO TABLE bltur FROM zzith_bltur .
      CLEAR bltur .
      MOVE : 'ZZZZ'   TO bltur-zzbltur ,  " Sat&#305;r toplam&#305; için ...
             text-002 TO bltur-zztanim .
      APPEND bltur .
      CLEAR list   .
      SORT list BY eknam ebeln .
      DELETE ADJACENT DUPLICATES FROM list COMPARING eknam ebeln .
      LOOP AT list .
        CLEAR : total, gtotal .
        total-eknam = list-eknam .
        total-zzbltur = list-zzbltur .
        total-sayi  = 1 .
        COLLECT total   .
        total-eknam   = list-eknam .
        total-zzbltur = 'ZZZZ' .
        total-sayi  = 1 .
        COLLECT total   .
        gtotal-eknam = text-001 .
        gtotal-zzbltur = list-zzbltur .
        gtotal-sayi  = 1 .
        COLLECT gtotal   .
        gtotal-eknam = text-001 .
        gtotal-zzbltur = 'ZZZZ' .
        gtotal-sayi  = 1 .
        COLLECT gtotal   .
      ENDLOOP      .
      FORMAT COLOR COL_HEADING.
      ULINE AT /1(145).
      WRITE :/
      sy-vline , (15) 'Dosya Sorumlusu' , sy-vline .
      LOOP AT bltur .
        WRITE :(15) bltur-zztanim  , sy-vline .
      ENDLOOP  .
      ULINE AT /1(145).
      FORMAT RESET   .
      total-zzbltur = '0001' .
      MODIFY total TRANSPORTING zzbltur WHERE zzbltur = space .
      gtotal-zzbltur = '0001' .
      MODIFY gtotal TRANSPORTING zzbltur WHERE zzbltur = space .
      SORT total BY eknam .
      LOOP AT total  .
        AT NEW eknam .
          WRITE :/
          sy-vline , (15) total-eknam COLOR COL_HEADING ,
          sy-vline .
          LOOP AT bltur   .
            len = sy-tabix * 18 .
            len = len + 3 .
            CLEAR wa .
            READ TABLE total INTO wa WITH KEY zzbltur = bltur-zzbltur
                                              eknam   = total-eknam .
            WRITE AT len(15) wa-sayi NO-ZERO.
            WRITE sy-vline .
          ENDLOOP    .
        ENDAT      .
      ENDLOOP .
      LOOP AT gtotal  .
        AT NEW eknam .
          FORMAT COLOR COL_TOTAL .
          WRITE :/
          sy-vline , (15) gtotal-eknam ,
          sy-vline .
          LOOP AT bltur   .
            len = sy-tabix * 18 .
            len = len + 3 .
            CLEAR wa .
            READ TABLE gtotal INTO wa WITH KEY zzbltur = bltur-zzbltur
                                               eknam   = text-001    .
            WRITE AT len(15) wa-sayi NO-ZERO.
            WRITE sy-vline .
          ENDLOOP    .
        ENDAT      .
      ENDLOOP .
      ULINE AT /1(145).
      FORMAT RESET .
    ENDFORM.                    " yazdir_ekgrp

    Hi,
    In the function  use the top-of-page event as follows:
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
                    I_BYPASSING_BUFFER          =
                    I_BUFFER_ACTIVE             =
                    I_INTERFACE_CHECK           = ' '
                 I_CALLBACK_PROGRAM          = 'ZRPMSLM'
                    I_CALLBACK_PF_STATUS_SET    = ' '
                    I_CALLBACK_USER_COMMAND     = ' '
               <b>  I_CALLBACK_TOP_OF_PAGE      = 'TOP'</b>
    Define whatever to appear in top-of page in a subroutine named TOP.
    Hope this helps.
    Reward if helpful.
    Regards,
    Sipra

  • Weekly/Monthly Snapshot Report

    Hi,
    I have now three cubes Daily,Weekly and Monthly cubes...
    I had made copy of the daily cubes as weekly and monthly.. There is no difference as such structure wise...
    But what extra i need to do to make these weekly snapshot report and monthly snapshot report..
    Now all three cubes are added in multiprovider and multiprovider was used in the definition of the query..
    For daily cube report though, i had simply restricted infoprovider as daily cube and designed the query..
    But what about weekly and monthly snapshot reports?
    as snapshot reports are basically meant for comparing time periods how i could achive the same in reporting?
    What i am contemplating as follows:
    1) Since these are comparing different times ( for weekly snapshot, you must have at least two different weeks of data to compare ) i guess we need to include a time chararistic 0CALWEEK for Weekly snapshot, 0CALMONTH for Monthly snapshot..
    But even after including this time charactristic, how i would be comparing?
    i am not clear on how to creata a snapshot report
    What one has to do in the weekly and monthly cube to be able to compare the data on weekly/monthly basis?

    Simran,
    Weekly Snapshot means entire data has to restated against each week.
    For example to check open orders status week wise, entire open orders(till end of current week) has to restate against current week. at end of the week, need to pass remaining open orders as next weeks snap shot.
    In this way we will get snapshoting of open orders week wise. We can use these weeks to compare.
    For weekly snapshot add week to cube, and at end of each week pass current week closing balances as next week opening balances + transactions in that Week gives snap shot of that week.
    For example Check: [HOW TO HANDLE INVENTORY MANAGEMENT SCENARIOS IN BW (NW2004)|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    Snapshot scenario.
    Hope it Helps
    Srini

  • BAdI BBP_PGRP_ASSIGN_BADI not triggering

    Hi All,
    I want to assign purchasing group to the shopping cart item based on Plant and Storage location.I found BAdI BBP_PGRP_ASSIGN_BADI  suitable for this, so I implemented it.But this BAdI is not triggering.
    Can anyone please let me know why its not trigerring?
    Thanks in advance.

    668754  Call of BADI BBP_PGRP_ASSIGN_BADI in ExtReq - inbound
    692056  Backend purchasing group to BBP_PGRP_ASSIGN_BADI incorrect 
    751310  BADI interface enhancement and call adjustments 
    954511  BADI enhancement ET_PD_PORG not transferred
    1027026  BBP_BID_INV: BBP_TRANSFER_GROUP doesnt split bid invitation
    1026818  BBP_PGRP_ASSIGN_BADI: Wrong backend purchasing organization 
    there are above problems reported on this BADI . tell your actions what you want to achieve by code so technical resources can cath the errors.
    update a piece of code what you wriiten to change the standard behaviors.so someone will help easily.
    As per standard SRM -> Upon the PURCHASE GROUP ->Responsibility TAB - purchase group determined by product category.
    Product category - CARS -> Purchase Group -> AAA -- responsible purchaser JAMES
    Product category - BIKE-> Purchase Grouo> BBBResposible Purchaser --> MIKE GANON
    muthu

  • OBIEE Snapshot Report

    Hi All,
    The requirement is as follows:
    I need to generate a new snapshot report having quarterly frozen metrics, i.e. these metrics which will not change after quarter end and this feature should not have any impact to any of the existing reports/dashboards.
    The new reports have been added in a separate Tab/Dashboard as a part of existing Dashboard.
    Could any one of you please suggest a way to achieve this?
    Regards,
    Chandu.

    hi,
    the only way is to transfer the data in the DB.
    1 way is with javascript or 2,with writeback.Every 15 minutes insert data in a temp table that you want.and then to pass all the tables you want in the dashboard.Then truncate them...and so on....
    this is the simple way,othewise with i-bot ,download the data in excel format,then with batcj job transfer to a appropriate folder and then use excternal tables to read them,
    Sorry ,only workarounds
    hope i helped....
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Snapshot report showing wrong instance on grid control!!!

    Hi
    On one of the cluster environments, Even though I run snapshot report on instance 2, report shows instance 1. This i happening on one set of cluster environment. Other cluster instances are working fine.
    Let me know if you have seen such behavior and fix...
    Thanks,

    It does not matter how many instances you have running in a RAC cluster ... you have one and only one database.
    Define your use of the term "snapshot." We have no idea to what you are referring.

  • Reporting Service Not Start

    Hi All
    After install SQL 2008 R2 Sp2, Reporting service not able to startup I have no idea about this. Anyone has the idea ?
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1617.00 ((KJ_RTM_GDR).110422-1901 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone></TimeZone>
      <Path>D:\Database\MSRS10_50.MSSQLSERVER\Reporting Services\Logfiles\ReportServerService__01_25_2014_00_00_47.log</Path>
      <SystemName>SV53413</SystemName>
      <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
      <OSVersion>5.2.3790</OSVersion>
      <ProcessID>2676</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    library!WindowsService_10!cbc!01/25/2014-00:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-00:00:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-00:00:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-00:10:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-00:10:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-00:10:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-00:20:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-00:20:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-00:20:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-00:30:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-00:30:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-00:30:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-00:40:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-00:40:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-00:40:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-00:50:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-00:50:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-00:50:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-01:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-01:00:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-01:00:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-01:10:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-01:10:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-01:10:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-01:20:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-01:20:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-01:20:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-01:30:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-01:30:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-01:30:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-01:40:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-01:40:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-01:40:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-01:50:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-01:50:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-01:50:48:: i INFO: Call to CleanBatch() ends
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Expiring old execution log entries
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Expiration of old execution log entries is complete.  Removed 0 entries.
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Cleaned 0 broken snapshots, 0 chunks, there were 0 unsuccessful attempts
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Cleaned 0 parameters values
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Cleaned 0 unused segment mappings.
    dbcleanup!WindowsService_10!ac0!01/25/2014-02:00:00:: i INFO: Cleaned 0 unused segments.
    library!WindowsService_10!ac0!01/25/2014-02:00:00:: Using folder D:\Database\MSRS10_50.MSSQLSERVER\Reporting Services\RSTempFiles for temporary files.
    library!WindowsService_10!ac0!01/25/2014-02:00:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-02:00:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-02:00:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-02:10:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-02:10:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-02:10:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-02:20:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-02:20:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-02:20:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-02:30:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-02:30:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-02:30:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-02:40:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-02:40:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-02:40:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-02:50:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-02:50:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-02:50:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-03:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-03:00:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-03:00:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-03:10:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-03:10:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-03:10:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-03:20:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-03:20:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-03:20:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-03:30:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-03:30:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-03:30:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-03:40:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-03:40:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-03:40:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-03:50:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-03:50:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-03:50:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-04:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-04:00:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-04:00:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-04:10:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-04:10:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-04:10:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-04:20:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-04:20:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-04:20:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-04:30:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-04:30:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-04:30:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-04:40:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-04:40:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-04:40:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-04:50:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-04:50:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-04:50:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-05:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-05:00:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-05:00:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-05:10:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-05:10:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-05:10:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-05:20:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-05:20:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-05:20:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-05:30:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-05:30:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-05:30:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-05:40:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-05:40:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-05:40:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-05:50:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-05:50:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-05:50:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-06:00:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-06:00:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-06:00:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-06:10:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-06:10:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-06:10:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-06:20:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-06:20:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-06:20:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-06:30:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-06:30:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-06:30:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-06:40:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-06:40:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-06:40:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-06:50:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-06:50:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-06:50:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-07:00:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-07:00:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-07:00:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-07:10:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-07:10:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-07:10:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-07:20:48:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-07:20:48:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-07:20:48:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-07:30:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-07:30:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-07:30:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-07:40:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-07:40:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-07:40:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!ac0!01/25/2014-07:50:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!ac0!01/25/2014-07:50:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!ac0!01/25/2014-07:50:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-08:00:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-08:00:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-08:00:47:: i INFO: Call to CleanBatch() ends
    library!WindowsService_10!cbc!01/25/2014-08:10:47:: i INFO: Call to CleanBatch()
    library!WindowsService_10!cbc!01/25/2014-08:10:47:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_10!cbc!01/25/2014-08:10:47:: i INFO: Call to CleanBatch() ends
    rshost!rshost!cb4!01/25/2014-08:10:48:: i INFO: Currently registered url
    http://+:80/ReportServer/ on endpoint 2
    rshost!rshost!b7c!01/25/2014-08:10:48:: i INFO: Currently registered url
    http://+:80/Reports/ on endpoint 3
    rshost!rshost!b7c!01/25/2014-08:10:48:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer/ReportBuilder, pdir=D:\Database\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!dd0!01/25/2014-08:10:48:: i INFO: Derived memory configuration based on physical memory as 4193500 KB
    servicecontroller!DefaultDomain!dd0!01/25/2014-08:10:48:: i INFO: Recycling the service from the default domain
    dbpolling!WindowsService_10!d38!01/25/2014-08:10:48:: i INFO: EventPolling polling service stopped
    dbpolling!WindowsService_10!d38!01/25/2014-08:10:48:: i INFO: NotificationPolling polling service stopped
    dbpolling!WindowsService_10!d38!01/25/2014-08:10:48:: i INFO: SchedulePolling polling service stopped
    dbpolling!WindowsService_10!d38!01/25/2014-08:10:48:: i INFO: UpgradePolling polling service stopped
    dbpolling!WindowsService_10!1408!01/25/2014-08:10:48:: i INFO: HeartbeatThread(NotificationPolling): Exited.
    dbpolling!WindowsService_10!1084!01/25/2014-08:10:48:: i INFO: HeartbeatThread(EventPolling): Exited.
    rshost!rshost!dd0!01/25/2014-08:11:03:: i INFO: Application domain type WindowsService statistics: created: 11, unloaded: 11, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!dd0!01/25/2014-08:11:03:: i INFO: Appdomain:13 WindowsService_11 started.
    resourceutilities!WindowsService_11!dd0!01/25/2014-08:11:04:: i INFO: Reporting Services starting SKU: Standard
    servicecontroller!WindowsService_10!dd0!01/25/2014-08:11:04:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!dd0!01/25/2014-08:11:04:: i INFO: Appdomain:12 unregistered.
    appdomainmanager!DefaultDomain!dd0!01/25/2014-08:11:04:: i INFO: Appdomain:12 WindowsService_10 unloading.
    appdomainmanager!DefaultDomain!1084!01/25/2014-08:11:04:: i INFO: AppDomain:12 0 pending unload(s)
    library!WindowsService_11!cb4!01/25/2014-08:11:04:: i INFO: Catalog SQL Server Edition = Standard
    crypto!WindowsService_11!cb4!01/25/2014-08:11:04:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
    crypto!WindowsService_11!cb4!01/25/2014-08:11:04:: i INFO: Exporting public key
    crypto!WindowsService_11!cb4!01/25/2014-08:11:04:: i INFO: Performing sku validation
    crypto!WindowsService_11!cb4!01/25/2014-08:11:04:: i INFO: Importing existing encryption key
    dbpolling!WindowsService_11!cb4!01/25/2014-08:11:05:: i INFO: EventPolling polling service started
    dbpolling!WindowsService_11!cb4!01/25/2014-08:11:05:: i INFO: NotificationPolling polling service started
    dbpolling!WindowsService_11!1408!01/25/2014-08:11:05:: i INFO: HeartbeatThread(EventPolling): heartbeat thread started.
    dbpolling!WindowsService_11!1084!01/25/2014-08:11:05:: i INFO: HeartbeatThread(NotificationPolling): heartbeat thread started.
    dbpolling!WindowsService_11!cb4!01/25/2014-08:11:05:: i INFO: SchedulePolling polling service started
    dbpolling!WindowsService_11!cb4!01/25/2014-08:11:05:: i INFO: UpgradePolling polling service started
    dbpolling!WindowsService_11!cc0!01/25/2014-08:11:05:: i INFO: PollingMaintenance: Polling started
    resourceutilities!WindowsService_11!cc0!01/25/2014-08:11:05:: i INFO: Maximum memory limit is 65536Mb
    appdomainmanager!WindowsService_11!cb4!01/25/2014-08:11:05:: i INFO: Appdomain:13 WindowsService_11 initialized.
    library!WindowsService_11!cbc!01/25/2014-08:21:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-08:21:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-08:21:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-08:31:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-08:31:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-08:31:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-08:41:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-08:41:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-08:41:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-08:51:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-08:51:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-08:51:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-09:01:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-09:01:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-09:01:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-09:11:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-09:11:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-09:11:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-09:21:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-09:21:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-09:21:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-09:31:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-09:31:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-09:31:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-09:41:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-09:41:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-09:41:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-09:51:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-09:51:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-09:51:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-10:01:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-10:01:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-10:01:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-10:11:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-10:11:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-10:11:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!a14!01/25/2014-10:21:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!a14!01/25/2014-10:21:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!a14!01/25/2014-10:21:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!a14!01/25/2014-10:31:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!a14!01/25/2014-10:31:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!a14!01/25/2014-10:31:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!a14!01/25/2014-10:41:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!a14!01/25/2014-10:41:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!a14!01/25/2014-10:41:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!a14!01/25/2014-10:51:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!a14!01/25/2014-10:51:07:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!a14!01/25/2014-10:51:07:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-11:01:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-11:01:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-11:01:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-11:11:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-11:11:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-11:11:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-11:21:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-11:21:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-11:21:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-11:31:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-11:31:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-11:31:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-11:41:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-11:41:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-11:41:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!cbc!01/25/2014-11:51:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!cbc!01/25/2014-11:51:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!cbc!01/25/2014-11:51:05:: i INFO: Call to CleanBatch() ends
    library!WindowsService_11!ac0!01/25/2014-12:01:05:: i INFO: Call to CleanBatch()
    library!WindowsService_11!ac0!01/25/2014-12:01:05:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
    library!WindowsService_11!ac0!01/25/2014-12:01:05:: i INFO: Call to CleanBatch() ends
    rpcserver!DefaultDomain!86c!01/25/2014-12:02:15:: i INFO: Process monitoring stopped.
    rpcserver!DefaultDomain!cbc!01/25/2014-12:02:15:: i INFO: RPC Server stopped.
    servicecontroller!DefaultDomain!cbc!01/25/2014-12:02:15:: i INFO: RPC Server stopped.
    dbpolling!WindowsService_11!cb4!01/25/2014-12:02:15:: i INFO: EventPolling polling service stopped
    dbpolling!WindowsService_11!cb4!01/25/2014-12:02:15:: i INFO: NotificationPolling polling service stopped
    dbpolling!WindowsService_11!cb4!01/25/2014-12:02:15:: i INFO: SchedulePolling polling service stopped
    dbpolling!WindowsService_11!cb4!01/25/2014-12:02:15:: i INFO: UpgradePolling polling service stopped
    dbpolling!WindowsService_11!1408!01/25/2014-12:02:15:: i INFO: HeartbeatThread(EventPolling): Exited.
    servicecontroller!WindowsService_11!cbc!01/25/2014-12:02:15:: i INFO: Service controller exiting.
    dbpolling!WindowsService_11!1084!01/25/2014-12:02:15:: i INFO: HeartbeatThread(NotificationPolling): Exited.
    appdomainmanager!DefaultDomain!cbc!01/25/2014-12:02:15:: i INFO: Appdomain:13 WindowsService_11 unregistered.
    appdomainmanager!DefaultDomain!cbc!01/25/2014-12:02:15:: i INFO: Appdomain:13 WindowsService_11 unloading.
    appdomainmanager!DefaultDomain!1408!01/25/2014-12:02:15:: i INFO: AppDomain:13 0 pending unload(s)
    appdomainmanager!DefaultDomain!ad0!01/25/2014-12:02:16:: i INFO: Appdomain:13 unregistered.
    rshost!rshost!ad0!01/25/2014-12:02:16:: i INFO: Application domain type WindowsService statistics: created: 12, unloaded: 12, failed: 0, timed out: 0.
    servicecontroller!DefaultDomain!cbc!01/25/2014-12:02:16:: i INFO: Service shutting down.
    It just stopped at the end....Please help~

    Hi sakurai_db,
    Thank you for your question.
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • DISconnecting clips from render files?

    I've forgotten how to do this - disconnect the clips on my timeline from their related render files. I've got an 8 bit uncompressed timeline onto which I've put a combination of DV footage (from camera) and uncompressed movies (from Motion). I want t

  • Does anyone know when 3.1 will be released?

    I know the beta version is out there and I'm hoping 3.1 will solve my issues with short battery life, intermittent loss of signal in areas I had no trouble with prior to 3.1 as well as a random "Restore Needed" error message that pops up about once e

  • Purpose for payment advice for customer

    Hi Gurus, I would like to understand that the Purpose for payment advice for customer in sap. Please provide some example to understand the purpose of payment advice for cutomer. Thanks Risha

  • Cisco 878 "priv" command password recovery in Rommon mode

    Hi, There was " Cookie information corrupt" error on cisco 878 and I enter cookie information with cookie command. The priv command password is "0000" when all cookies zero, but I inserted wrong cookies . I want to edit cookie information. The priv c

  • Conversion Exit/Routines for Project ID

    Hello All, I am from the BI forum. I would like to have conversion exit for Project ID, The Problem i am facing in BI is, that in my BI report , the project iD displays in internal format , but i need in External format. For Ex the Project ID in Mast