SNMP Service not listed in messaging server Conf Console
HI
We are running Messaging Server in Windows NT, in the Messaging server Configuration Console SNMP service is not getting listed.
Please help in finding out what i am missing, but SMTP service is ruuning mail delivery is working Fine
Sorry I am not getting SMTP Service in Conf Console please help me
Similar Messages
-
Dispatcher running but not connecd to message server
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?thanku for your advise..
ok.. the following the are developer traces for 0,1,2.
0.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:32 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4872
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4872) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:33 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4872) [dpnttool.c 345]
1.
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:35 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M
M Wed Jul 11 16:54:36 2007
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4244
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 4244) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:37 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 4244) [dpnttool.c 345]
2.
trc file: "dev_w2", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:37 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 5888
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 5888) [dpxxdisp.c 1016]
I
I Wed Jul 11 16:54:39 2007
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:40 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 2
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 2)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:40 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 5888) [dpnttool.c 345] -
'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER'
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?Dear friend
Your database is notworking
shailesh Tiwari -
Disp+work.exe is running but not conneceted to message server
Hi All
disp+work.exe is running but not conneceted to message server
Regards
BlueHi,
Did you tried restarting the server ?
is there any error related to the shared memory ?
I suggest you to restart and check ..if still no luck..
better post the query in SAP Basis Forum with all the dump you are getting ..you willget quicker responses..
HTH
Rajesh -
I can't get the finger service to work in Messaging Server 3.01.
I can't get the finger service to work in Messaging Server 3.01.
<P>
This is a known problem in 3.01. There is a patch which
fixes this problem. It is available at:
<P>
ftp://[email protected]/messaging/m301ptch.exe
<P>
the password is: bet@NOW!Hi David
Say you have term <foo> and definition <bar> pair. Here term (any text you want highlight) is used in document at many places and definition is defined once as complete paragraph anywhere (i.e. in table cell). if same term is define at multiple places first definition is taken.
Use marker text same as your term text <foo> for tagging both term and definition.
Use Glossary marker to tag definition
Use GlossaryTerm marker to tag term
We have taken feedback to update the FrameMaker help on this.
For in place highlighting you may also try expanded text http://help.adobe.com/en_US/FrameMaker/9.0/Using/WS9FDAD957-2A30-4251-B520-EC32E0A8097B.ht mlhttp://help.adobe.com/en_US/FrameMaker/9.0/Using/WS9FDAD957-2A30-4251-B520-EC32E0A8097B.ht ml Now in FM 12 expanded text is inside Special > Publish Options > …
Hope it clarifies your doubts
Thanks
Amit -
Workprocesses not connecting to message server
Hi all,
the sapinstance is not comming up after restart.
the problems are
1.R3trance -d return code =0000
2.At SQL prompt> ORA-12154 error coming .
3. trace file for dispatcher.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 4072
Mon Sep 15 12:28:59 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Sep 15 12:29:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >H2SEC6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DE0040, size: 4930904)
DpShMCreate: allocated sys_adm at 05DE0040
DpShMCreate: allocated wp_adm at 05DE2090
DpShMCreate: allocated tm_adm_list at 05DE6980
DpShMCreate: allocated tm_adm at 05DE69B0
DpShMCreate: allocated wp_ca_adm at 061F94B0
DpShMCreate: allocated appc_ca_adm at 061FF270
DpShMCreate: allocated comm_adm at 062011B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06282070
DpShMCreate: allocated gw_adm at 062820B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 062820E0
DpShMCreate: allocated wall_adm at 062820E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c 467]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 8388608 K
Config. maximum size : 12582912 K
Avail. maximum size : 12582912 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
8388608 K
12582912 K
12582912 K
8372224 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 5845420 K
Commit Charge Limit : 12382576 K
Commit Charge Peak : 5845452 K
Phys.Memory Total : 54 K
Phys.Memory Available : 92263112 K
File Cache : 17376774 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 92263140 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 735836 K
Private Pages : 0 K
Total heap size : 12947 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6068 K
Allocated heap memory : 6748 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
592
sapstartsrv.exe
16188 K
16204 K
19096 K
19120 K
4
3832
msg_server.EXE
[MS] EC6_01
7752 K
7752 K
10316 K
10316 K
1
984
enserver.EXE
[**] EC6_01
13644 K
13644 K
53448 K
53448 K
3
1484
msg_server.EXE
[MS] EC6_00
8160 K
8160 K
10696 K
10696 K
2
4072
disp+work.EXE
31972 K
32032 K
67548 K
67652 K
7
1860
igswd.EXE
[**] EC6_00
2612 K
2860 K
1484 K
1756 K
0
Sum
80328 K
162588 K
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:14 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Sep 15 06:59:14 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 ENQ -1 Run no 0 0 0
8 BTC -1 Run no 0 0 0
9 BTC -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 SPO -1 Run no 0 0 0
12 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Mon Sep 15 06:59:14 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Sep 15 06:59:14 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Sep 15 06:59:14 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:19 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >H2SEC6_EC6_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4072) [dpxxdisp.c 10421]
Good Bye .....
Please help
SudhakarareddyHi,
If possible to restart the server and check it.
some times buffer not clear.
Regards,
Anil -
Hi Forum,
in my X1 server, in rwb, it gave error:
HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://xyz:50000/AdapterFramework/rtc,
on further analysis we find that:
<b> Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/com.sap.xi.mdt cannot be started. Reason: it has hard reference to resource com.sap.aii.af.svc with type service, which is not active on the server.</b>
and the service/component com.sap.aii.af.svc is not present as the error says,
In visual admin, in the services list i couldnt find this particular resource,
pls instruct me how to deploy/start this service com.sap.aii.af.svc ,Hi,
Please check out the user authorization and role and also check that you are maintaining the passwords in all places where required.
Regards
Aashish Sinha
PS : reward points if helpful -
Dispatcher running but not connected to message server :( please help .
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3744
Mon Oct 26 12:37:38 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3744) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Oct 26 12:37:50 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0211.qqq.nxst) took 12 seconds
Mon Oct 26 12:38:06 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >noptqas_DEV_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
Mon Oct 26 12:38:07 2009
***LOG Q0K=> DpMsAttach, mscon ( noptqas) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >noptqas_DEV_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Oct 26 12:38:47 2009
ERROR => DpHdlDeadWp: W0 (pid 276) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 5532) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 3696) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 4928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 6040) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 3892) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3860) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4564) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 3940) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3288) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 5136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 5128) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 4452) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 5664) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 5540) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 4312) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=309
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 26 12:38:57 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 26 07:08:57 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 276 Ended no 1 0 0
1 DIA 5532 Ended no 1 0 0
2 DIA 3696 Ended no 1 0 0
3 DIA 4928 Ended no 1 0 0
4 DIA 6040 Ended no 1 0 0
5 DIA 3892 Ended no 1 0 0
6 DIA 3860 Ended no 1 0 0
7 DIA 4564 Ended no 1 0 0
8 DIA 3940 Ended no 1 0 0
9 DIA 3288 Ended no 1 0 0
10 UPD 5136 Ended no 1 0 0
11 ENQ 5128 Ended no 1 0 0
12 BTC 4452 Ended no 1 0 0
13 BTC 4680 Ended no 1 0 0
14 BTC 5664 Ended no 1 0 0
15 SPO 5540 Ended no 1 0 0
16 UP2 4312 Ended no 1 0 0
Dispatcher Queue Statistics Mon Oct 26 07:08:57 2009
===========================
SiSelNRemove: removed sock 196 (pos=2)
SiSelNRemove: removed sock 196
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 196
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3744) [dpxxdisp.c 10421]
Good Bye .....
Thanks in advance
Shakeel.Please check this forums subject. It is SAP Business One System Administration - dedicate to SAP Business One System only.
Close your thread and post to a proper forum. To make other members read your message easily, at least some line breaks are needed in your message.
Thanks,
Gordon -
SAP MMC Says Dispatcher running but not connected to message server
I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid 560 (PC with Windows NT)
[Thr 4516] relno 6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno 43
[Thr 4516] intno 20020600
[Thr 4516] pid 4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c 1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor -
InDesignServer Service not starting on Windows Server 2003 (32bit & 64 bit)
Note: this issue is different from this thread on a similar issue.
This problem has plagued me for weeks and I finally give up. InDesign Server installs successfully and the InDesignServerService starts, but the server does not run. I can only run the server from the command line. I've followed these installation instructions but run into the following problems:
1. installing by the command line: InDesignServerService /install fails and produces the following error log:
Installing service InDesignServerService...
Creating EventLog source InDesignServerService in log Application...
Rolling back assembly 'E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.exe'.
Affected parameters are:
logtoconsole =
assemblypath = E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.exe
logfile = E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.InstallLog
Restoring event log to previous state for source InDesignServerService.
2. I cannot install or load the snap-in to MMC. When I try to install regsvr32 InDesignServerMMC.dll it cannot be found (as it's not in the InDesign Server directory). However InDesignServerMMC64.dll is in there and I was able to load the snap-in using regsvr32 InDesignServerMMC.dll, but the server still only runs when being started from the command line.
As I mentioned, InDesign Server runs fine when I have an active command line window open and run InDesignServer, but the moment I close the command line window, the server shuts down. Any ideas?Well, when you run it using command line if you close the command line, of course that servers going to shutdown. So, if you wanna run without any extra window opened, you have to start your service. Go to the windows service window (administrative tools) and start the service (it's installed automatically).
Is your O.S. 32 or 64 bits? If it's 32 you install the wrong application, you have to install the compatible version with your O.S.
If you installed correctly, you can try up the service using the follow command in you prompt.
net start InDesignServerService (in this case you can close window when successefull menssages appear)
Cya -
FTP sharing service not listed under sharing preferenecs
Hi All,
I need to enable FTP sharing on my MacBook Air (2011 OSX 10.7.2) but when I go to the Sharing settings under system preferences, FTP is not listed so I can't turn it on. Any thoughts as to how I install the FTP service?
Thanks!I know how to enable it, it's just a stunningly bad idea. What are you doing that couldn't be done better with SFTP in 2012?
There's a reason Apple no longer exposes a GUI control for it.
But here:
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
Replace 'load' with 'unload' to turn it off again. -
Warning: MDB application is NOT connected to messaging system on console
An application works on weblogic 8.4 recently upgraded to weblogic 10.3 with Foriegn JMS server configuration.
<foreign-server name="Fax JMSServer">
<notes>The Foreign JMS Server Confirm uses to talk to Fax</notes>
<default-targeting-enabled>false</default-targeting-enabled>
<foreign-destination name="FaxReplyQueue">
<local-jndi-name>com.foo.jms.FaxReplyQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxReplyQueue</remote-jndi-name>
</foreign-destination>
<foreign-destination name="FaxRequestQueue">
<local-jndi-name>com.foo.jms.FaxRequestQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxRequestQueue</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="mq-jms-ConnectionFactory">
<local-jndi-name>com.foo.jms.FaxConnectionFactory</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxConnectionFactory</remote-jndi-name>
</foreign-connection-factory>
<initial-context-factory>com.sun.jndi.fscontext.RefFSContextFactory</initial-context-factory>
<connection-url>file:/C:/bea/mqJNDI</connection-url>
</foreign-server>
Upon deployment, an warning message "MDB application is NOT connected to messaging system" occurs on the weblogic 10 console for one of the MDBs. In log file you can find the following message:
<Oct 27, 2009 4:35:15 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: FaxNotificationBean is unable to connect to the JMS destination: com.foo.jms.FaxReplyQueue. The Error was:
Can not get distribute destination information. The destination JNDI name is com.foo.jms.FaxReplyQueue, the provider URL is null>
The following is the annotations of the MDB in workshop.
@ForeignJmsProvider(connectionFactoryJndiName = "com.foo.jms.FaxConnectionFactory")
@JndiName(remote = "com.foo.faxmgr.ejb.FaxNotificationBean")
@MessageDriven(defaultTransaction = MessageDriven.DefaultTransaction.NOT_SUPPORTED,
destinationJndiName = "com.foo.jms.FaxReplyQueue",
ejbName = "FaxNotificationBean",
durable = Constants.Bool.FALSE,
transTimeoutSeconds = "0",
destinationType = "javax.jms.Queue",
initialBeansInFreePool = "1",
maxBeansInFreePool = "10"
I googled and found the same questions asked before but no working answers. Does anybody know what's wrong with my MDB? BTW, it works the same way in weblogic 8.4 platform.
I even tried to add resource refs as below but the same warning message is still there. TIA.
@ResourceRefs(
{@ResourceRef(name="com.foo.jms.FaxConnectionFactory",
jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE),
@ResourceRef(name="com.foo.jms.FaxConnectionFactory",
jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE)}
)Hi,
We have had this same issue and the problem was diagnosed as a Oracle listener.ora issue with the OIM database connection not beining configured to use it's 1522 connection but using the default 1521 so it was just sat there not knowing that it's port should be 1522.
Regards,
Simon -
Service Not Listed in SAP Service Marketplace
Helllo All,
Due to mixed system information in the registration details stored for one our Solution Manager services I deleted the information that was stored in SAP Service Marketplace and successfully re-registered the service with the correct details yesterday.
However, the service (SID) is now not present in SAP Service Marketplace when I search for it and as such SAP can not connect to the service and I can not raise messages against it. Prior to deleting the Service it was present.
Please could someome advise what needs to be done to ensure the service is re-listed within SAP Service Marketplace.
Do I need to contact a specific department / contact within SAP to accept the re-registration of the service ?
Many thanks,Hello,
I think you should open an OSS message (using another system SID), under component XX-SER-SAPSMP. They should help you to set the services related to your installation properly.
Hope this helps.
Best Regards -
Services not showing in Integration Server.
Hi,
I have created File Adapter(Sender),RFC Adapter(Reciever) scenario in Integration Repository and Integration Directory. But none of Services,Communication Channels ,Receiver Determination etc are showing in Integration Server (transaction SXI_CACHE) after Activating them in Integration Directory.
Cache clearing is happening properly(full and delta mode).
Can anybody help, how to solve this problem.
Regards
AbhiHi Michal,
After installation of XI, CPACache refresh was failed.
But now cache refresh is sucessfull when we tried with URL http://sapxiserver:port/CPACache/refresh?mode=full in browser.And when i try the following URL to check history
http://server:50000/CPACache/history.jsp, no errors.
Is there any other settings do I am missing? What are the possible cases Services are not shown in IS?
Regards
Abhi -
Phone number not listed in Messages accounts post OS Mavericks updated
I updated to OS X Mavericks, and now my phone number is no longer listed in the Messages accounts.
So when I send messages from my phone, it creates a new thread using my email and those messages do not show up on my phone.
Likewise, messages that are from my phone are no longer updating from my computer.
Any suggestions on how to reconcile this?
Messaging back and forth from my phone and my comp were working simlessly prior to me updating to OS X Mavericks.
Is this a known issue? and is there a solution because it's annoying.
Thank you,
KRalph Johns (UK) wrote:
HJi,
iCloud and Messages (or FaceTime) are not linked.
You can have any Apple ID and "register" it for use with Messages for the iMessages side.
Same for FaceTime
In fact the Apple IDs for iMessages and FaceTime and iCloud can be three different IDs
10:20 PM Monday; September 24, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously
Very true, howevere if you use the same apple id for all 3 of them then it should work as it did for me. Its worth a try.
good luck
Maybe you are looking for
-
Why is the linked image scale percentage being rounded off in Illustrator CC?
-
In my JPA project I'm using these three classes: Cart.java: package com.spinnaker.pedja; import java.sql.Date; import java.util.ArrayList; import java.util.Collection; import java.util.HashSet; import java.util.Set; import javax.persistence.*; @Entit
-
I'm reading in some XML generated by Access. A node looks something like this: <desc> <div>Here is <a href='https://example.com'>a useful link</a> for you.</div> </desc> And when i put that into my textfield I end up with: Here is <a href='https://ex
-
Hello, I created a bit of code and instead of typing java {filename} all the time i would like to create a small application out of it. I mean so i can double click the icon so it runs. Also, if it is possible to create a double click application, wo
-
Hi we are migrating from ND5 to iPlanet. we are using Imt JATO 1.2. The model classes extends UIF FunctionalModelBase. The JATO package doesn't have UIF package and hence none of my model classes are compiling. Now how do I go about it?. Should I ins