Snow leopard and rosetta

I have a couple of questions about snow leopard and rosetta.
1. Quicken uses PowerPC code. Will Rosetta install automagically when I start Quicken or do I need to install Rosetta as part of the install.
2. Assuming a Quicken update in the not too distant future, and assuming that other Rosetta apps are banished from my computer, is there a way to de-install Rosetta code when it is no longer needed?
Thanks

sdevan,
First, I'm not sure why you are that concerned over Rosetta, other than the fact that universal binary apps will always run at least somewhat better than the PPC equivalents. There are still many PPC machines in the install base, so PPC code (and thus Rosetta) will not be going away any time soon. But, your questions...
1) Obviously, Rosetta must be present within OS X in order for you to run PPC applications. No one knows yet whether or not Rosetta will be installed by default. I very strongly recommend that you carefully review the options within the Snow Leopard installer when you run it.
2) Again, we don't know. I would think it would be rather difficult to get rid of everything associated with Rosetta, if it exists as part of OS X. I wouldn't recommend trying, and in truth, I see no reason why one would want to do so. There would be no benefit.
Scott

Similar Messages

  • Since installing Snow Leopard and Lion two weeks ago, my iTunes program opens seemingly at will.  It usually starts playing music, too.  What is causing this?

    Since installing Snow Leopard and then Lion on my Intel-based iMac two weeks ago, my iTunes program seems to open at will whenever the computer is on.   It often begins playing music, as well.  What is causing this and how do I make it stop?

    There are ways to minimize, mitigate, and help avoid a lot of problems.
    Bootable backups.
    Zeroing a drive twice before using, and format it with SL DVD Apple Disk Utility for sure.
    Even a clean install should import old apps without having to reauthorize.
    If you must do an upgrade, do it from the SL DVD, after repairing the drive and be sure to use the SL version of Alsoft Disk Warrior (4.2).
    Wait six months before jumping on a new OS.
    10% is still too many. Yes, it is more sensitive to RAM and hard drive errors, doesn't like some controllers; most ext hdd cases; and enough software to make for test-only status. And it only IDs some known incompatible applications, drivers, extensions, etc and does not remove even those always in best manner.
    Plus, there are problems with the new Rosetta and the cache files it now uses. So some apps and plug-ins will cause more trouble. Not all are ready. Good reason to hold off for the months it takes.
    Other devices act different as far as on/off behavior.
    (Migrating from G5s to Mac Pro can cause all kinds of problems, weird behavior, sluggish system, and why anyone that went down that road was strongly recommended to NOT use Migration Assistant for any of their applications, and to ONLY do clean/fresh installs of any apps. If you skipped that day, didn't read the Guide to M.A., or didn't want to do fresh installs then, your system could have been on borrowed time. If you did do clean install of applications, great.
    Installing SL can result in a corrupt directory - I think and it "seems" to be happening, but no real proof, just gut feeling and instinct (underlying file system problem? weak sectors that pre-existed waiting to happen?).
    Remember all the "there just aren't a lot of 64-bit drivers" for Vista and XP? it's come home to roost.
    ... my guess is not enough incense and offerings. To hop into TimeMachine and SuperDuper backup images and pull the 1TB for another day (week, month, year).

  • Unable to set up a dual boot for Snow Leopard and Lion

    I'm running an early 2011 MacBook Pro.  I originally ran this machine with Snow leopard for quite a while.  I've got 8 GB RAM and lots of free space on my hard drive.  I upgraded to Lion and it works well.  But I want to boot to Snow Leopard from an external drive to run some old Rosetta apps.  However, I couldn't run the Snow Leopard installation disk on the Lion Machine.  When I tried to boot to the installation disk, I would get a beeping sound during startup, three beeps in a row - repeating, and it would not boot.  So I connected the external to another machine running Snow Leopard and I installed a new version of Snow Leopard on the external drive.  But my Lion machine will not boot from that external.  I am able to select the Snow Leopard drive in the Start Up Disk pane in the prefs. But when I restart, I just get the three beeps.  I must be missing something here.  Any help would be appreciated.

    Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
    (67955)

  • Hello, I want to know if will lose my apps if I upgrade to Mavericks? I I have Snow Leopard, and I have not because I have fear of losing my apps

    hello, I want to know if will lose my apps if I upgrade to Mavericks? I I have Snow Leopard, and I have not because I have fear of losing my apps

    You will only lose Power PC apps.
    To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mavericks.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Snow Leopard and Appleworks

    I have several scrips I use that access Appleworks. Since installing Snow Leopard, Apple Script crashes when I try to run any of them. When I first opened AppleWorks after the OS update, it told me I had to install "Rosetta," which I did and AW now opens, but AS still crashes when I try to run any of the AW scripts.
    Are there any suggestions out there? I have a copy of Numbers 09, which will I'm sure will work, and I have expected that someday I would be forced to switch over from AW. But, I would rather not have to do it just now as I have charts on AW and I have not been able to use Numbers to make anything close to them.

    Ooops! I posted too soon. After my prior post, I tried to load the AW script again and it continued to cause Script Editor to crash. But, several of the other scripts that also used AW not only loaded into AS, but ran not only normally, but much faster. I finally determined that it was only the one script that crashed AS. I pulled a copy of that same script from my last backup and it loaded and ran fine. So, as of this moment, I am a happy camper and everything runs under Snow Leopard, AND, it runs noticeably faster. One particular script runs at least ten time faster, which is amazing.

  • We need to upgrade from Leopard to Snow Leopard and then on up the chain. How?

    We have an old MacBook running Leopard (10.5.8). Can we upgrade to Snow Leopard and then add others gradually untill we get to the newest version? If so, were can we find a copy of Snow Leopard?

    Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
    Then, determine if your Mac meets ALL minimum system install requirements.
    To install Yosemite, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mavericks,  Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
    8 GB or more of available space
    Next,
    If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
    The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe  could no longer secure their rights to continue to use Rosetta in later versions of OS X.
    So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
    Also, check for app compatibilty  here.
    http://roaringapps.com/
    If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
    These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
    Once you have determined all of this, you should be able to find the latest version of OS X Yosemite by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
    You can then begin the download and installation process of installing OS X 10.10 Yosemite from the Mac App Store.
    Good Luck!

  • HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

    I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

    You stated; "Mountain Lion disables OfficeMac"
    That is not true.
    Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
    Allan

  • Snow leopard and photshop elements 4

    Hi. Apple have transferred photoshop elements 4 onto my new imac with snow leopard and I find I can't pull photos through from the iphoto library using the "open" facility in pse4. Is this an unsolvable scenario - or is there a wrok around?

    Welcome to Apple Discussions!
    As far as I could tell, I couldn't run Photoshop Elements 4 on an Intel Mac. Version 6 is available and can run from an Intel Mac. You might be able to change PSE 4 to be Intel Mac compatible if your plugins aren't PowerPC based by selecting Open in Rosetta from the application's Get Info window in the Finder.
    If that doesn't work http://www.lemkesoft.com/ 's GraphicConverter is a low cost alternative to Photoshop Elements on Snow Leopard.

  • Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

    Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
    I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
    Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
    So here's my dilemma:
    1.  Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on       the same "Fusion 5"?
    2.  Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
    3.  Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
    Has anyone had any experience installing BOTH a previous (older) version of Apple OSX  ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
    OR
    Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

    mende1
    Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
    Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
    I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
    "Unlimited Client License"
    It was around $25.50 (USD) with sales tax and shipping (NYS).
    One thing though ... when you mention:  "you should make two virtual machines".
    Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
    Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
    "two machines" (one for Snow Leopard and one for Windows 7)?

  • I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on.  The Tech told me to

    I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion.  Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine.  Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer.  I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs.  Also the computer keeps freezing up when it is in the sleep mode, etc.
    When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it.  Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

    I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

    Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
    It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
    Have you run Disk Utility's Repair tool on the external drive as well?
    I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
    My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

  • I just downloaded the latest version of Snow Leopard and now my iWeb won't open.

    I just downloaded the latest version of Snow Leopard and now my iWeb won't open. Does anyone know how to fix it?

    If wish an answer, additional information would be helpful.
    Allan

  • I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

    I am running Mac OSx Lion 10.7.2.
    My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open

    I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open.  What do I need to do?

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    Download 9.1 and 9.2.3 updates and install them

Maybe you are looking for