Snow Leopard disc on new MB Pro an upgrade disc or full version disc?

I've been wishing to buy a 13" MacBook Pro since my brother got his. He's got one with Leopard but I want mine with Snow Leopard already installed. Since I live in Puerto Rico, we don't have Apple Stores and they don't ship here either, I depend on Best Buy for my Apple needs. I've been calling them to find out if they have that laptop with SL and today some BB employee told me that they didn't have them with SL installed but that the computer comes with a SL disc so I can make the upgrade myself. Is this true, I didn't know Apple was doing that? If is true, is this SL disc an upgrade disc or a full version disc? Can I use that SL disc to install SL on a new, empty hard drive? If anyone has some experience with this please help.

I just got a new Mac Pro and it came with a Snow Leopard disk that was absolutely identical, inside and out, to the SL disk I bought when it first came out.
I didn't try an erase and install, I cloned from a hard drive backup (as we discussed elsewhere), but you can't see any difference between the disks, I have no doubt it's a full disk.
I had heard that Apple only made a single disk this time. I'm assuming the price of SL made separate disks unattractive.
Kevin

Similar Messages

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

Internal BluRay burner recommendations for Snow Leopard on a new Mac Pro?

We're finally getting new Mac Pro's...hallelujah!! I was just wondering if anyone out there could recommend a good internal BluRay burner that will be compatible with the Intel Quad Core, Snow Leopard, and FCP7. Any assistance is greatly appreciated. Thanks!
Melanie

Melanie Dupre wrote:
We're finally getting new Mac Pro's...hallelujah!! I was just wondering if anyone out there could recommend a good internal BluRay burner that will be compatible with the Intel Quad Core, Snow Leopard, and FCP7. Any assistance is greatly appreciated. Thanks!
Melanie
Hi Melanie
Why does it have to be an internal Blu-ray drive? How many computers are you getting?
I would recommend purchasing the OWC Mercury Pro FireWire 800/400, eSata, USB 2.0 SATA 5.25 Case Kit and choosing your own SATA Blu-ray burner to install in the case. That way you can connect it to just about any MacPro, MacBook Or even a PC if necessary.
Here is a link:
http://eshop.macsales.com/item/Other%20World%20Computing/MRSFW8U2/
Or if you don't want to build your own, OWC has several that they have built for you but I haven't been keeping up with any other them enough to recommend a specific Blu-ray burner. In any case, here are a couple likes.
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8BDSD12XT/
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8BDSD12X/
Ron

Can I install Mac OS X 10.6 (Snow Leopard) on my new MacBook Pro?

Hi all, I'm user of Mac since lot of time and I`ve got a question. I have bought a Macbook Pro on September 2011 and it cames with Lion and no installation disc. Can I downgrade this Macbook Pro with Lion preinstalled to Snow Leopard with SL Retail disc?

Not with a retail disc — it doesn't contain a recent enough version of Snow Leopard to boot the machine. You'll need to obtain duplicates from Apple of the discs that would have been shipped with your machine before the release of Lion. Call Customer Relations at the number below and ask to have them sent to you for a small fee.
1-800-767-2775 (USA only. Outside the USA, call AppleCare)

Do i need to install snow leopard on my new macbook pro?

i picked up a new macbook pro and it came with snow leopard. i don't know what the snow leopard will enhance and if i should even install the program.

Your MacBookPro comes with Snow Leopard pre installed. It's not a program, it's an operating system. Mac OS X - Snow Leopard.
You might benefit from viewing these videos.
http://www.apple.com/findouthow/mac/

TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

I just purchased a Macbook Pro. I used Migration assistant to transfer my files from my '06 iMac, which was running snow leopard to the Macbook and at start up now get a DMS Launch error every time... any suggestions??
The error message says check with the developer to make sure DMS Launch works on this version of OS X. You may need to reinstall the application.
I have installed all updates as it suggests, to no avail. I keep getting the error message and report pop up box each time at start up and the only way to be rid of it, is to click ok to send the report - there is no option to stop the report from coming up.
Does anyone have any suggestions on what I can do to stop the error message appearing and resolve the issue?
Thanks
Chelle

Click Command+shift+G
Type in the following, one by one- Then delete the **** out of them.
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/Application\ Support/DivX/
HOME/Library/Preferences/com.divx.*
Also search anything "DIVX" while in library. Delete the **** out of that too.

Can I run Tiger and Snow leopard on a new macbook pro 15"

Hi
I have a Macbook running Tiger, soon to be replaced (I hope) by a
15" Macbook Pro Sno Leopard. Can I partition the drive on the MBP to run
Tiger also, as I have Adobe Creative Suite 2 and can't afford to upgrade that too. And I really don't want to run to computers.
Thanks

Welcome to Apple Discussions!
Snow Leopard will run CS2 with some limitations.
http://snowleopard.wikidot.com/start
Either find a Mac older than October 26, 2007 you can use until you can bring all your software to Snow Leopard compatibility from these sites*:
http://www.macmaps.com/usedrefurbished.html
Or find an alternative application for the functions you need from the first link that is Snow Leopard compatible if you can use that.
- * Links to my pages may give me compensation.

Snow Leopard Server on new Mac Pro

I'm trying to install SL Server on a new Mac Pro (dual quads, Radeon video, 6GB RAM) and half way through the installation I get a screen that looks like analog TV static.
Anybody else seeing this?

Here's what I've done:
1. took machine out of box. (grin)
2. Booted off full 10.6 Volume CD
3. Partitioned drive with new name
4. Did install. Got to the installing xx minutes remaining screen.
5. Worked for 10 minutes then screen blanked.
6. Moved mouse and the screen is pure static. Looks like an old TV not getting a signal.
7. Swapped memory, same result. Added more memory, same result. Swapped all memory with new, same result.
8. Reseated all cards, same result.
9. Installed 10.5.6 from the disc that shipped with the machine.
10. Ran all updates.
11. Placed 10.6 server disc in drive. Launched it from within 10.5.
12. The system rebooted normally.
13. Started the install again, static at the same place.
I'm a bit stuck here. My xserves didn't do this.

Can i install snow leopard on my new macbook pro which came loaded with Lion?

My new MBP came loaded with Lion. Can i install S.L. on it?

Don't install a version of Mac OS X earlier than what came with your Mac

Can I install Snow Leopard on a new partition on a Macbook Pro (Late 2011)?

I need to get Pro Tools 9 up and running again after I migrated from PC to Mac, but I know that Pro Tools 9 doesnt work with Lion.. I dont have the money to upgrade to PT10 so my thought was to go downgrade to Snow Leopard to get it working. But I dont want to leave Lion, so my question is if I can make a new partition and install Snow Leopard on the new partition and have both OSs bootable?
The guy in the store I bought my mac from said Snow Leopard probably wouldnt play nice with the mac since its adapted to Lion but I dont trust people that get money for preaching about the constant need for "the latest". So I thought I'd ask the experts instead, so here I am! What do you guys think?

theoretically, it should work - but the guy at the Apple Store is correct....computers that ship with the latest operating system do not support being downgraded.
You might not get past the spinning beach ball & gray screen if you try to boot from the Snow Leopard install disc.
It's worth a shot though if you want to try it. Just don't try to 'downgrade' the current Lion installation back to Snow Leopard. Try instead to create a new partition specifically for Snow Leopard. Disk Utility - select the top HD (probably reads Hitachi something)...select it, click on the Partition tab. Select the top partition, and you should then be able to see the + so you can add a new partition. I would probably make it about 20GB give or take depending on how much space you think you will need - but i believe the Snow Leopard installation by itself takes up around 8-10GB.
Once this partition is created, insert your Snow Leopard installation disc, restart the computer and hold the C key down to start from the install disc. When it walks you through the steps for installation, select the newly created Snow Leopard partition. Install. Be sure to go through all the Software Updates (numerous times) after the installation is done.
You can select which startup disc you want to boot from by holding the Option button down at startup until you see the gray startup manager that shows your Lion partition, Recovery Disc partiton, and your Snow Leopard partition.
If for whatever reason this doesn't work, simply just erase the partition. It likely will not work but you should be able to just erase that newly created partition without any other problems.

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

Does the disc look like this DVD?

Snow Leopard already installed on Macbook Pros?

I know this may seem like a stupid question but cut me some slack, I've never had a mac before.
I just bought a brand new MacBook Pro today. It came with a disc "Mac OS X Snow Leopard". Is this disc already installed on my computer or do I have to insert it and install it? It also came with two grey discs entitled "Applications Install DVD" and "Mac OS X install DVD". Are these also already installed? Thanks!

It's confusing. The disc just says "Mac OS X Snow Leopard". It doesn't say what version it is. It does say 1. Instal such and such, however I'm a PC user and usually the discs that come with the computer are already installed, they are just backup incase your computer has some sort of problem.
Actually I did just see on the front of the "Everything Mac" handbook it says, "10.5.7 Leopard" but, not knowing a mac, I wouldn't know if that was any different.
Do I have to install those grey discs as well?
Message was edited by: Life@thezoo

How do I transfer files from mac with snow leopard to a new retina display mac

What is the easiest way to transfer files from my old mac(2008) snow leopard to my new retina display mac book pro?

Easiest? Well there is some sort of wireless transfer thing, but I hear it takes FOREVER like several days and it's glitchy.
The Retina doesn't have a Firewire port I believe, so Target Disk Mode is out, unless you have a adapter and I don't know how well that will work out. Cost another $30 for the adpatper I bet.
The likely most easiest?
Run down to any computer or office store and pickup a powered external USB hard drive that's the same size or larger then the old Mac's boot drive.
Boot the old Mac and download Carbon Copy Cloner.
(or use the TimeMachine if it asks, but it takes a reallly long time and if there are problems, then it's harder to recover files from)
Format the external drive in Disk Utility with Partition: option GUID and OS X Extended Journaled (default setting)
Use CCC to clone OLD A boot drive to External Drive B, takes about a few hours depending how much stuff you have.
Hook up drive to new Mac, (either clone or TimeMachine drive)
Use the free Migration Assistant in your Application Utility folder to transfer over, but creates a new user account (you can later delete one)
Or if you haven't set up the new Mac yet, when you do set it up during that process, you can transfer from the External Drive B and it won't have the account you set the machine up with naturally just uses the ones from the clone or TimeMachine drive.
Once your fine and dandy on the new machine, then Disk Utility erase and use the external USB to create either a bootable clone with CCC or a TimeMachine drive for backup.
Since you need a backup drive anyway, this method is better and happens to be reliable and easy.
Most commonly used backup methods

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanks

Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

Snow Leopard disc on new MB Pro an upgrade disc or full version disc?

Similar Messages

Maybe you are looking for