So I formatted a brand new hard drive to MAC OS (Journal), I then could save on the hard drive. Not two days later Im back at square one, the program wont recognize the hard drive again.
So, hard to beleive, but I am having some trouble with Final Cut Pro X.
This last week I formatted a brand new hard drive to MAC OS (Journal),
so that I could save on that hard drive.
Well it went great.
I saved my project on there and copied a few others over as to free up space on my Laptop.
Then, not two days later Im back at square one,
the program wont recognize the hard drive.
It wont even open the events up off my hard drive,
as to jog the program into reqcognizing the scratch disk (which worked twice before).
What happened?
How do I get the program to re-recongize my newly formatted hard drive?
Please help!
The name of the drive, or the name of some folders inside the drive, may fool FCP X into believing it is a camera.
Also, you should not use the drive for time machine backups.
Similar Messages
-
Help!!! Ok, if they don't want me to buy stuff, then ok, I won't waste any more money on their products!!!
Try closing the App Store app (and iTunes if open) via the iPad's multitasking bar and see if it works when you re-open it : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
You could also do a soft-reset (i.e. a reboot) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear.
And try logging out and in via the Featured tab in the App Store app and see if that makes any difference. -
Computer wont recognize second hard drive in target disk mode
I've had trouble installing Leopard on my iMac (read this for full details: http://discussions.apple.com/thread.jspa?threadID=1196525&tstart=0)
Long story short, I tried to hook up the iMac to my computer, starting it (the iMac) up in Target Disk Mode, in order to save some files before restoring the hd, but my computer wont recognize the iMac hd when it's connected. Is there any way to save these very important files?Because the drive might not be the only thing that isn't working, it could be your logic board or something else. Removing the drive will isolate it and allow you to see whether your data is recoverable without having to worry about what else is failing on the iMac.
-
I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?
If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068) -
My itunes account wont recognize the access code on my itunes giftcard, how can i fix that?
my itunes account wont recognize the access code on my itunes giftcard, how can i fix that?
Without providing details on exactly what you did it is hard to provide an answer. It's like me saying, "This chocolate cake I made tastes wrong," but not providing the recipe for review. Maybe it was the garlic in that particular recipe.
If iTunes is successfully using a previous library which you rename to iTunes Library.itl then that is now the current library.
Have you restarted your computer and then tried emptying the trash? -
I accidentally synced my mum's brand new iPad to my mac book air. A few days later I realised that my iTune library on my mac is completely gone. So is my iPhone 4s after I synced it with my mac. How do I get my old iTunes library back? I tried using icloud on my iphone but it stated that I have never back up my phone before. So I guess my iCloud data is gone too? But I have back up my mac in my harddrive using time machine. So how do I get my old itune library back? Please help! Thanks!
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
I was in the middle of the new update and it said there was a error and now my ipod touch will not turn on or off or anything it is just a picture of the apple.
thank you
KristyError 11 is a strange one...if you search the discussions for error 11 you will get a number of hits but none with a real resolution other than getting the iPod to restore, which you have done. And one person indicates this does not appear in the support data base...already found that out.
If you have restored, have a backup and can restore from that, you might try the update again, or wait for the next update whenever that comes out.
Not a very satisfactory answer but if it is working again... -
Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.
Wrote a little wrong the first time!
Then I upgraded to 7.1 so have power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery. -
I just got an iPhone 4s, and want to sync some music to it, but itunes wont recognize the phone. what do i do to make the phone show up in itunes?
windows http://support.apple.com/kb/TS1538
macs http://support.apple.com/kb/TS1591 -
Create a program that recognizes the human face , any API or idea?
Hi , I try to create a program that recognizes the human faces, taking images from a webcam , but i don´t know how do it , any API or idea?
shays wrote:
sabre150 wrote:
malcolmmc wrote:
Don't be so negative.I can never understand why negative realism should be so looked down upon. I also can't understand why verbal abuse is looked down on when it can be taken so constructively. In fact I feel the same about physical abuse, why do people shy away from it when it clearly shows how we really feel. Who needs courtesy, it doesn't do anyone any good. And lets take off the turn signal on cars, I don't need some light to tell you that I am about to cut you off. And we should definitely use the car horn more often. Any time I see an ugly car I get right behind them and lay on the horn. What's wrong with that. ; )So you want me to be unrealistic? So you want me to be upbeat about the OP's chance of creating a face recognition program? So if I see you about to jump off a cliff you want me to say - go for it, it won't hurt much, you will gain much from the experience?
And where was this verbal abuse? In reply #4 I was sarcastic (as you are in your post) but to my mind not abusive. In reply #6 I was critical of the OP's approach but to my mind not abusive.
Get real. -
My phone keeps on turning itself on, therefore interrupts the ongoing "iPhone Recovery Mode" in iTunes. This then makes me go back to square one: restore and wait 4 hours over and over again. What do I do to make it not get up again?
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
when I try to turn on my ipod touch I get a picture of a cracked apple and then a picture of a cable arrowed to the iTunes logo. I cannot do anything else. My computer now doesn't recognize the ipod and it looks like I lost all music and pictures. help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I just purchased 2 WD TB external hard drives. I have one formatted to be used with the time machine and it is working well. the other that i am using to store large files is excluded from the time machine. I can't click on it and add as per instructions. It won't allow me to. I need to back t his up as well. Ive backed up this one so I am able to reformat it but it doesn't recognize the drive unless it is formatted in FAT which is what WD advices it be formatted in. It should be in Mac extended journaling but I can't get it to mount in that. Help?
In addition, TM will not backup drives partitioned in FAT as the OP stated his 2nd EHD is formatted. My recommendation to the OP is to reformat the 2nd EHD to Mac OS Extended (Journaled) and then include it in his TM backups. Of course in order to do this the OP must first move the data on the FAT partitioned drive to his internal HD and then once the EHD is re-partitioned correctly he can move it back.
In addition as Pondini mentioned the 2nd EHD must be directly connected to the iMac rather than be a network drive, TM is NOT, repeat NOT a network backup solution with the single caveat of using a Time Capsule backup. -
i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help
Janieburmy,
You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
So, let's try the filter experiment.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set. -
HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj
Maybe you are looking for
-
IPhoto 8.1.2 (424) + OS 10.6.4 = crash upon trying to edit photo
I recently updated to 10.6.4. As soon as the update to the OS was finished each time I go into iPhoto and try and edit ANY photo, the app crashes and gives me a crash report. I've tried trashing the prefs and I have also rebuilt my library - both did
-
Oracle Database Mobile Server 11 sync
Hi, I have two simple tables in the back-end oracle database in order to create a meeting-room android application with and embebbed SQLite database on the client devices. I have written all the functionality to register, authenticate, create a new a
-
URL Link to Documents in Other systems
Hi, Is it possible to have a url link saved as a document in OCS? We have somme documents that cannot be moved to OCS( business decision). These documents reside in various systems and are raccessible through a web url. Is there any way to create thi
-
Yesterday, when I turned on Firefox, an Ad for a Registry cleaner pop up on the opening page. I tried to delete the pop up but there is no "close" button. I tried to delete using Add or Remove Programs Control panel), did not show up in the Display l
-
I want to know if the apple store will be open the 23 and 24 of dicember
i want to know if the apple store will be open the 23 and 24 of dicember