Are pick released lines updated real time?

Hello,
When you pick release an order do the delivery detail line status get updated in the wsh_delivery_details table as they are released individual or after the pick release program finishes pick releasing the entire order?
Thanks for any information you can provide.

- We have a third party warehouse management system that will do the shipping.
- So when orders are in a pick release status we send that order to the warehouse.
- We look at the following tables for the pick released orders in real time: WSH_DELIVERY_DETAILS,wsh_new_deliveries
So the problem occurs when the pick release program is running.
It will first insert the header of the order in the wsh_new_deliveries table and then as the order lines are being pick released it updates the WSH_DELIVERY_DETAILS table.
Our interface starts when it sees a new order in the wsh_new_deliveries table. The interface will then pick all the pick released order lines. But because the pick release program is still pick releasing the lines the interface will only pick a subset of the pick released lines.
So we don't know when the pick release program is finished finished pick releasing the lines.
Of course we can add a time delay but there is never a guarantee.

Similar Messages

Are there any firmaware updates for time capsule?

Are there any firmware updates for Time Capsule/Time machine?
I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use) preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
Bill in Tulsa

TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
It says the "sparsebundle" is open (or in use)
That error is well known. It should simply required the TC to be restarted..
That sometimes gets things working where the simple restart won't.
I would recommend using short names, with no spaces and pure alphanumeric.
That is C9
http://pondini.org/TM/Troubleshooting.html
If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
See A4 in the same reference.
Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
Again read the info in pondini. B5 and B6.
The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

Tax Audit file (Taxware) is updated real-time from SAP

This is an issue when there are server issues, disaster recover, or any connection issues. I do not see a way in RFYTXDISPLAY to control the update. Does anyone know how to make it so that the updates to external tax audit file is done in batch instead of real-time?

What release of SAP are you on? In some older releases, SAP provided update programs to do what you ask. If SAP is down, there are no transactions and no taxes to update. If Taxware is down, the updates are queued in SMQ1. You can, once Taxware is up, release all the updates.

Odd behavior on web template used to update real-time cubes

Hello all
This is my first time posting on this forum so please excuse any blunders.
I have a situation wherein 2 queries (one built on an aggregate level which is set up on a multiprovider containing a real-time cube and the other built on an aggregate level set up directly on a real-time cube) are being used to update data. For both of these queries, I'm trying to fill in fields such as user, created by, time, date etc. These fields are being filled in the custom class "ZCL_LOC_CR_LINE_ITEM" and all of the settings are correct for the aggregation level/infoproviders.
However, I'm encountering 2 problems. Firstly, for one of these queries on the web template, the fields I want filled are not getting filled in by the exit. In fact, I put hard-code break points in the exit's DERIVE method but the control is not even going in there. But for the other query, the control flows into the user-exit correctly when I hit the return key after populating all of the remaining characteristic fields on the input screen. Secondly, for the first query, the fields are not input-enabled. But I've set up both queires to be more or less similar in the sense that the fields to be populated in the user-exit are not on the query screen etc. I'm stumped and would appreciate some help from the experts out there.
Regards
Sam

Regarding yor first quesiton, if the exit is not being reached, then most likely you have not correctly defined the characteristic relationship in the planning modeler. For it all to work, go to the planning modeler for the infoprovider that you are deriving the characteristics. Ensure that your source characteristics are all contained in the aggregatin level being used by the planning query in question. Also ensure that none of the target characteristics are contained in the aggregation level.
Also, make sure that the "inactive" checkbox is not marked for the individual characteristic relationships.
Note that whether or not the query is on an multiprovider or a real-time sube, the characteristic relationships are always defined directly on the underlying real-time cube.
Regarding the second question, for a query to be input-ready:
-There must be a real-time cube in the query directly (or indirectly via mutliprovider)
-The query must start up in change mode (or be switched into change mode)
-Cell(s) must be defined as input ready either by their settings in the row or column
-Every characteristic in the aggregation level must be fully qualified (including currency,UOM, or any nav attributes used as selections)
- note that when using a mulitiprovider, it is necessary to specify the real-time infocube name in the planning cell/row/col selections
If all of the above are met, try drilling down in the query once it is presented and see if anything is unaccounted for

Update real time account general data into a custom table

Hi,
I have created a z table for storing account general data for some business requirement. I have created a program and executing batch job to update this z table on periodic basis. Can anyone suggest some other alternative solution to update this z table whenever an account gets created/modified in CRM system? Instead of running a batch job periodically, I need a real time replication of the account data in this custom table.
Thanks and Regards,
Sneha.

Hi,
Thanks for your reply.
But, Can you elaborate the solution, Can we use Business Transaction Events(BTEs) for updating Partner data? Will these be triggered for Account Creation/Modification. If so, Can u suggest any BTE which can be used for my requirement?
Thanks and Regards,
Sneha.

BAdI........How are they used in the real time scenario.

Im a rookie in ABAP development and i was wondering that how we use the BAdI enhancement technique in the real time scenarios. Like do we get create them or we have few already built BAdI's which we work on? Can any body please explain how this works.

Hi Ramana,
Business add-ins are enhancements to the standard version of the system.
Business Add-In is a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP system based on specific user requirements.
Each Business Add-In has:
at least one Business Add-In definition
a Business Add-In interface
a Business Add-In class that implements the interface
In order to enhance a program, a Business Add-In must first be defined
Subsequently two classes are automatically generated:
An interface with IF_EX_ inserted between the first and second characters of the BADI name.
An adapter class with CL_EX_ inserted between the first and second characters of the BADI name.
The Application developer creates an interface for this Add-In.
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Have a look at http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
How to develop BADI
Reward if useful.
Thanks
Aneesh.

Best data provisioning tool for very large amount of data updated real time?

about a few hundred million entries of data a day and it must be replicated to sap hana in real time, what would be the best option?

Hi Wayne,
If you are looking for real time replication, then SLT is the best option. What is the source system for this replication?
Regards,
Chandu.

Where are daqmx files stored on real time target?

Hi,
I am working on an application that will be embedded in a RT desktop target. To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programatically from the *.ini file exported from MAX. This way, users don't have to know what my code is doing in order to recalibrate sensors or manage new hardware; they only have to know how to use MAX and where to store the config files on the target.
Where are daqmx task, channel, and scale information stored on a RT target? I've been through the files on the target looking for something that contains my task data but have found nothing, though dropping a system property node into a VI running on the target will give a correct list of the tasks that I have configured. (The project that contains the aforementioned VI does not have the tasks in it ie: I did not import them to the project.)
Is there a utility that will run on the RT target that can generate a task at run time from the exported *.ini files?
Thanks
CLAD
Solved!
Go to Solution.

Exahustive keyword searching brought me to an answer on the forums. I'll post a brief summary here in case anyone else uses the same keywords as I have.
1. Export config file from MAX
2. Write a VI that uses the tools in the System Management pallette to upload the configuration to the real-time target.
3. Profit.
In my case, the VI I wrote to upload the DAQmx config also generates the config files for the VIs on the host and target side, so everybody knows what the tasks are called.
CLAD

How to update real time

How to update real-time

Are you talking about the adobe flash plugin? If so download that from the adobe flash download page.

CATSDB values are copied from HR in real-time

We use default values in IT 315 to report in CATS. At some point we have discovered wrong default values and changed them in the HR records.
But the "wrong" values were already copied into CATSDB table for posting, even though entries are not posted yet into finance.
Is there any OSS note/program that can refresh CATSDB with current values from the HR records? Otherwise we have to cancel/reverse and report again that is time consuming.
Thank you

HI ,
No need to reverse or cancel the posted entries. since you have not posted in finance. it can overwrite.
Go to transaction code CAT2 , make the required changes and save the data.
Then with CAT5 transfer the data once again , it will overwrite your existing data.
Hope it will helpful for you.
Regards
Sandeep
Edited by: sandeep_1979 on Sep 23, 2010 2:06 PM

What are rthe recovery tols for Real Time

how to recover my Data in time of crash . can I partition my PXI controlller running in realtime in c and D . what are the advantages and Disadvantages.
Suresh Thangappan

Suresh -
When configured properly RT systems are very stable deterministic systems, but on rare occasions a crash can still occur. In most situations recovering data may be as simple as FTP'ing to the RT system and downloading the data files. However, if a crash occurs while a file is being written it can corrupt the file, the sector on the disk, and possibly even the drive (similar to the behavior in any OS).
If the PXI chassis is booted into windows, any disk recovery tools that runs in windows may be used to attempt recover corrupt files or sectors.
Partitioning a drive when using Windows works great, but is not supported in RT. At this time RT will only recognize the first partition on each physical drive.
Regards,
Erik

Planned delivery time not updating real time in apo

Hi,
I have a location product which is part of the active integration model.
The location and product are both available in ECC and APO.
When i change the value of Planned delivery time in ECC, the changes do not get transfered to APO even after RIMODINI.
For e.g. the planned delivery time currently is 1 day and it is changed to 3 days, even after doing RIMODINI the changes are not reflected in APO.
Kindly suggest if somebody has come across this issue earlier.
Thanks & Regards.
Santosh Joshi

Hi Santosh,
Please check by tcode CFM5 weather material is there in IM or not .
Also check CFG1 log on R/3 and SLG1 or /SAPAPO/C3 or /SAPAPO/CQ in APO.
Please confirm.
Manish

HOW to update real time data from sap to other application?

We have two option of passing data from sap to other system.
1. web service
2. through idoc.
can anyone tell me advantages & disadv. of these two options.
Which scenario shd we use web service & idoc.
How is idoc triggerred.?
Is it only through user exit?
Kindly suggest any other ways for interacting with a 3rd party system which does not use a file.

Dear Libin,
IF you are using sap sytem as a sender then its better to use idoc's. Actually both systems (idoc and webservice) have there own advantages and disadvantages. Look up sdn for more info.
My personal choice would be idoc since with webservices you would need special tools like xml spy or altova and the skill to analyze and run those tools.,, its a little tedious..
Rgds
joel

Real time transaction response - unable to locate the root element

Hi There
Has anyone integrated webMethods with Data Services 3.2 for real time transactions?
We are trying to create a real time dataflow, initiated by webMethods. We are sending the request to the Access Server which runs our
real time dataflow and does process the request. However, our return response is null. No data in the response back to webMethods. We have
tested this in soapUI, and our transaction does work. We get the correct response back.
So my question is has any experienced this issue with webMethods? Any suggestions or ideas?
Here is the error
===========================================
Path name:
     PortType: Real-time_Services
     Operation: Realtime_address_cleanse
WSDL code: S-9043
[ISS.0092.9043] Schema Error: 1
     pathName: null
     errorCode: CONV-004
     errorMessage: [ISC.0082.9104] DataOut - unable to locate the root element
     identifier: null
===========================================
ps- xmlspy does not work as well
Please let me know
Thanks
Kurt

The problem was the generated test SOAP message from Netbeans. When built, the interface had more levels than described below. I've also had similar issues caused by bad namespaces - either not defined properly or not picking up the default namespace.

Matlab script node for real time purpose

Hi!
We are trying to control in real time the frequency of a vibration motor with a voltage signal proportional to EMG activation.
Our EMG sends data to a LAN port and we read them in Labview using the UDP Read function.
We created a VI which reads data from UDP connection, parses the header and does the decoding (according to the data type of our EMG device, TMSi Porti).
Every sample read from UDP port is passed to the Matlab script node which implements a Bayesian filter which returns a value (MAP) used to control the vibration frequency.
The problem is that this operation is extremely slow...(about 15 seconds!!) and we need it to be real time!
We tried also a simple MA filter and the delay is reduced to around 2 sec, so we think that the major problem is in the Matlab script node.
We wonder if this delay is due to the call of an external code (Matlab) or to the complexity of the Matlab code itself.
Do you know how to improve the performance of this VI?
Thank you!
Serena
Attachments:
EMGreceiver+Bayes.vi ‏54 KB

Serena
I noticed that your code also have LabVIEW MathScript RT code. Have you tried to replace the Matlab scriptnode with it? The MathScript Node compiles the script natively into G function and avoid transfering information between programs.
If this does not speedup your application, please attach the subVIs and test data that allow us to reproduce the problem and performance. Also, what is the version of LabVIEW that you are using? If it is before LabVIEW 2009, then I would strong recommend update to that version.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Are pick released lines updated real time?

Similar Messages

Maybe you are looking for