SO10 std text problem

i have created a std text using SO10 in a development client.
When i test it in another client , the std text is not there
But usually we do developement in a client and do testing in
another client without transporting
For this standard text , its not available there
What is the posssible causes for this ?

Hi There.
I would like to suggest you some references, as your issue is similar to that refered,
You need to TRANSPORT it again, It should work.
[SDN - Reference for transport SO10 Object|Tranport SO10 object;
[SDN - Reference for Standard text - Development|Standard Text;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Similar Messages

How to include std text(Created in So10) in text node?

Hello,
How to include the Standard Text( created in So10 ) into Text Node.
I had typed the Standard text name in the TEXT NAME : ZXXX
      Text Object : TEXT
       TEXT ID : ST
      LAnguage : &CONTROL_PARAMETERS-LANGU&
But, I am unable to look at that particular text in the smart form. I am receiving an error message : "UNable to load the data into front end. ....etc"
It is taking me away to the initial screen.
PLz help!
ANy suggestion will be appreciated.
REgards,
Kittu

I need to include the Standard text created in so10 into a text node in the Smart form.
In samrt form, I had created a Text Node.
In General attributes from the Drop Down menu
--> I had selected INClude Text
--> It has asked me TExt name : ZXXX (Name of the STD text create din so10)
                     Text Obje : TExt
                     Text ID   : ST
                     Language : &CONtrol_Parameters-LANGU&
           It is even activated without any errors. But, it does not display the Text written in the Standard Text. Is there any way that I can include the Standard text into the Text node.......
ANy suggestions will be appreciated...
REgards,
Kittu

SO10 Standard text unable to create std text

I am trying to create std text through SO10, once i have cretaed its not saving , plz help me
Edited by: vishwas shastri on Jun 16, 2011 11:05 AM

vishwas shastri wrote:
> those are not reflecting .(saving) .help me plz..
Hello Vishwas,
Are the changes not reflecting or are they not getting updated? Please be specific.
On more question, do you have separate dev & testing clients? And you're changing the ST in dev client & when checking in testing client the changes are not reflected!
BR,
Suhas

Smartforn Std text Paragraph format not getting picked up

Hi,
   I have to include Standard texts from SO10 in my smart forms. I am using Incude Text option. The issue is that my std texts are dynamic ( I pass std text name in the form ) and hence it has many paragraph formats. When I run my form I get the result in default para format. If i create a para format in my style then it takes that in output but the issue is that the std texts are dynamica and can have many para formats. I cannot define all the para formats in my smartstyle and If i dont define in my style is does not pick the para format from std text. It works in script but not in smartforms. Pls help
Thanks
Abhinav

<af:commandButton text="#{ad4jResBundle.JVM_TARGET_DELETE_MESSAGE12}" id="dummyB1"
                                    action="#{viewScope.TargetHandlerBean.destinationPage}" visible="false" clientComponent="true"></af:commandButton>
              <af:resource type="javascript">
                function customHandler(event) {
                    var exportCmd = AdfPage.PAGE.findComponentByAbsoluteId("emT:dummyB1");
                    alert(exportCmd);
                    var actionEvent = new AdfActionEvent(exportCmd);
                    actionEvent.forceFullSubmit();
                    actionEvent.noResponseExpected();
                    actionEvent.queue();
When customHandler is called , it shows alert as "AdfRichCommandButton [oracle.adf.RichCommandButton] id=emT:dummyB1" so i guess it got the handle of button. but call to action - "#{viewScope.TargetHandlerBean.destinationPage}" never happens.
Any idea what i am doing wrong?

Std text misalignment

Hi all,
I have a std text which i have include in the element 'Last Page Phrases' (main window) the text is printing in two pages .
Now the problem is in the first page it is printing correctly where as in the second page it is overlapping in the 'Item header' In the Main window.
Could any body help how this has to overcome
Thanks & regards
ravi

Hi Ravi,
Copy the second page from first page. Right click first page and copy that to second page.
In output options tab select what things you would want in both pages and what values you would want only in first or second page.
This should solve the problem.
Reward points if useful.
Thanks,
Tej..

Hi all std text

HI ALL
I RAN RSTXTRAN TO TRANSPORT STD TEXT TO ANOTHER CLIENT, BUT AFTER RUNNING NOTHING HAPPENED.
THE TC ASKED NAME OF CORRECTION AND OBJECT NAME?? AND THE NEXT SCREEN SHOWED PROVISINAL LIST OF TEXT TO BE TRANSPORTED.
SO MY QUESTION IS :
WHAT I HAVE TO DO IN RSTXTRAN, SO THAT STD TEXT IN 800 CLIENT WILL GO TO (OR COPY TO) CLIENT 900.??
I WANT TO COPY STD TEXT FROM ONE CLIENT TO ANOTHER??? PL PROVIDE FULL PROCEDURE.
THANX
ROCKY

Hi,
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA..
Hope this will solve your problem.
<b>Reward if helpful.</b>

Need to trigger change pointers for a change in std text

I need to trigger an idoc via change pointers when any change in a std text occurs. I am doing this for changes in Customer Master. For example, if the std text obtained via tcode XD02 is changed, then I need to trigger an idoc. Is this possible? What is the object class used?
Thanks,
Keerthi

Hi,
All Standard text views are stored in V_E071.
Use the View for V_E071 for checking standard text transport
Give Object Filed Name = TEXT and check
And search the standard object
Go to se09 create workbench request and
Double Click the request and go to program give R3TR and Object: TEXT and object Name: TEXT, Nike_FT_AB_4700, ZEPC, D
Object: TEXT
Where Nike_FT_AB_4700 is Customized Name of Standard Text
Text Id: ZEPC (Default: ST)
Language: D (DE)
Go to SE03 double click the Search for Objects in Requests/Tasks in the
R3TR Object ; TEXT and do search.. with respective to that you will get change request.
Do rewards points.

Using text elements in so10 standard texts

How to use text elements in so10 standard texts.

HI,
In DDIC we have two structures :
1. THEAD - Text Header
2. TLINE - Text Lines
SO10 is the tcode..for standard text...
We have a FM to read the text ... read_text...
and save_text is for create text..
this text is are used in SAP scripts...
the standard text is identified by three parameters :
1. Text Name
2. Text ID ( ST for standard text )
3. Language
hope helpfull
Raghunath.S

Lines around type and other type/text problems in Dreamweaver CS3

Dear Dreamweaver forum:
Good news/bad news,
First the good news…
My thanks to a forum member by the name of Mylenium. With Mylenium's advice I have improved my halo problem by including a black background when I save type in Illustrator CS3 as part of importing it into Dreamweaver CS3.
However, the bad news, is that I’m still having type and text problems.
Problem area 1
Now, in Dreamweaver, I’m getting lines appearing around the type.
I am dragging and dropping the .gif type file into a Dreamweaver Div Tag.
How do I get rid of the lines around the type so that they do not show up in the Safari browser?
(Please see below)
Problem area 2
I cannot drag and drop text from a Word .doc file into a Dreamweaver div tag.
I also cannot copy and paste Word .doc text into a div tag.
How do I include text on my webpage without having to manually type it in?
(Please see below)
Any help would be appreciated. Thanks!
From within Dreamweaver CS3, how do I place text? Dragging and droppign the file does not work.
This is screenshot of what I see so far when I use Safari to test what I have made so far in Dreamweaver CS3.
I get lines around type.........not usually a good thing.........How do I fix it?
The way I created the portfolio type in IllustratorCS3 using the File > Save for Web and Devices. I then imported the resulting .gif file so that it was within my root folder within the Files panel within Dreamweaver CS3.
Am I doing this right?

Hi
The problems you are experiencing with the image text, (why are you using image text, these days?) is probably cause by the image having a border when created in illustrator, or the image size being set incorrectly.
As for the word text if you are using windows, see http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ce6.html.
On the mac it is a little more complex, save your word doc as html, then apply the 'clean up word html files', (see - http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ef5.html) copy the relevant text and mark-up from the word html file, and paste into your html document in the required position.
PZ
www.pziecina.com

SO10 move texts to another text ID

Dear Friends,
In T Code SO10 Standard text I have maintained texts in text ID ST.
Is there a way to move these texts to a different text ID by Mass change etc...
Please help.
Rgds... Ravi

Hi friend,
There is no such way for MASS MAINTENANCE in Standard Text.
You have to maintain individally for each text.
regards,
santosh

To read a SO10 Standard text

Hi,
I have created an SO10 Standard text (ZTEXT), now from a report program i have to Read it's text and use further.
How can I read an SO10 Text from a report Program?
Pls provide some sample code.
Thanks in advance,
Pankaj.

To whom?
please close your thread without showing any consolations(Thanks a lot!) towards people if you don't want to assign the poitns.These points are not giving us food but surly these would be enough feed for needed person.
just read below link carefully specially step 4
[Forum Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]

Workaround for the Fade/Appear blocky text problem in IE

Just wanted to share with folks a workaround for the IE
"blocky text" problem that you see when using Fade effects like the
one used in this example:
http://labs.adobe.com/technologies/spry/samples/data_region/DetailRegionEffectsSample.html
It turns out if you set the 'background' CSS property on the
element you are fading, that IE properly renders the text. So to
fix the effects sample above, all you would have to do is modify
this CSS rule in the file to place a background color on the
description region to get things to look good in IE:
#description {
opacity: 0;
filter: alpha(opacity=0);
background: white;
So if folks have been avoiding the use of effects because it
makes things look terrible in IE, you now have a workaround.
--== Kin ==--

I was using spry's AppearFade effect to transition between
"slides" in what equates to a viewstack that I created.
Then I noticed that it would take bold text in IE and make it
look all smudgy or blurry.
Well, after working on it for a while, I got to thinking,
"This problem is specific to text rendered in MicroSofts
browser"... "Hmmm, I wonder".
So, I tried using this style rule: [ font-family:"MS Sans
Serif",Arial, Geneva, sans-serif; ].
Lo and behold, feed the stupid MS browser an MS font and it
does not blur the text.
I just wanted to get this our there. Because someone might
want to solve this in a way where they don't have to set a
background color...

E6 Big Texting Problem

Can anybody help me out with this problem?
My E6 has developed a texting problem, whenever I send a text none of the text appears in the conversation speech bubble, just the date or time when it was sent and the character "0". Does anyone know why?
Thanks
Solved!
Go to Solution.
Attachments:
Text.jpg ‏1560 KB

Would suggest that you backup E6-00 using Nokia Suite, then reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Perhaps restore contacts only and try out texting/conversations before restoring device any further.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia C3-00 texting problem.

Hello everyone, this is my frist post on here. So i bought the nokia c3 and unlocked it from the vodafone network. I use my 02 sim now. I just discovered something that annoys me and need help getting rid of it.
My problem is that after every text send the phone virbates letting me know that i have sent the text and my balance comes up. how do i change the settings so that this doesn't come up. Really annoying as i've just got a new number and sent out a mass text to everyone. The phone vibrated for like 2 minutes straight!!
Any help greatly appreciated. Thank you.

At the phone store where I bought the Nokia C3 they removed the Vodaphone presets ( since I have another provider ) and they also updated my phone with the latest software available ( see below ).
But now I have a serious texting problem!
If you type the Q you get an A , a=q , z=w and w=z .
Also after you typed something and you delete the text and reopen the textbox again this word will reappear on a blue underscore?? Anyone any idea what's happened or had the same problem??
The phone's update info:
C3-00
V04.45
04-08-10
RM-614
Variant: 00.00
Vitual variant: No Virt. Var.

Text Problems in Safari 4

Just this morning I started to experience bad text rendering problems in Safari 4. I am seeing text that overlaps on other text, text that leaves a button and crosses over into the space next to it, text that is truncated on buttons, image alignment problems, and more. Typing in text boxes is a problem, too -- the cursor doesn't display at the point where text is actually being inserted, but several characters off.
It doesn't affect every site -- Google and Netflix look OK, while Apple and Facebook are strongly affected to the point of being almost unusable. Firefox and Chrome on the same laptop are working fine. Other programs on the system, like TextEdit, are fine, too. I have tried changing the default font preferences in Safari, but while the text size changes on certain pages, the overlapping text problem isn't helped.
I have screenshots of the issue -- how do I post them?
Does anyone else see this issue? Many thanks for your opinions and advice?
Safari Version 4.0.3 (6531.9)

Where did you get 67 errors? http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.totallybarbado s.com%2F shows the only error is the "pre" tag which are necessary hacks for formatting the "pre" tag. The other "warnings" are no different than checking apple.com http://jigsaw.w3.org/css-validator/validator?profile=css2&warning=2&uri=http://w ww.apple.com
They also do not assign background-color to "every" css element. Why would you (to bloat CSS)? So, there is exactly "one" error which is well documented and is supported in CSS2.1 when released.
The problem is that Safari does not adhere to white-space or "pre" tags (preformatted text). This has been an ongoing problem since it's incarnation. All other browsers (FireFox, Netscape, IE, Opera, Mozilla..etc) do. http://www.w3.org/TR/1998/REC-html40-19980424/struct/text.html#h-9.3.4
edited: Sorry, had to edit as this forum software actually rendered the <"> tags (without quotes)

SO10 std text problem

Similar Messages

Maybe you are looking for