SOA 11.1.1.5 two Node Cluster BAM not starting on the second Machine

Hi,
I have installed Oracle SOA 11.1.1.5 in a 2 Node Cluster. Both SOA Managed Servers are coming up fine. BAM Managed Server installed on the primary HOST also comes up fine. But my second BAM Managed Server is not starting. I don't see anything in the logs and on the Console the status is showing as Starting but it never starts. I can access the BAM Console for the one installed on the primary HOST but when giving the URL for the second HOST it doesn't come up as the I don't see an option the server is running.
I have 2 machines for this cluster setup
On machine one with IP Address: *192.168.2.2* all below servers come-up fine
Admin
BAM1
SOA1
On machine two with IP Address: *192.168.3.3* have the below servers and only the SOA is coming up fine BAM not starting
BAM2 not starting
SOA2 coming up fine also
After giving user/password this is what I see in the terminal window and it never moves looks like getting stuck:
<Mar 8, 2012 12:31:40 PM EST> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Mar 8, 2012 12:32:58 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Mar 8, 2012 12:33:01 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Mar 8, 2012 12:33:01 PM EST> <Info> <WorkManager> <BEA-002900> <Initializing se
lf-tuning thread pool>
<Mar 8, 2012 12:33:01 PM EST> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\oracle\Middleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\logs\BA
M2.log will be rotated. Reopen the log file if tailing has stopped. This can hap
pen on some platforms like Windows.>
<Mar 8, 2012 12:33:01 PM EST> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\oracle\Middleware\user_projects\domains\EP_SOA_DOMAIN\
servers\BAM2\logs\BAM2.log00001. Log messages will continue to be logged in C:\o
racle\Middleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\logs\BAM2.log.
>
<Mar 8, 2012 12:33:01 PM EST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\oracle\Middleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\
logs\BAM2.log is opened. All server side log events will be written to this file
.>
<Mar 8, 2012 12:33:09 PM EST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Mar 8, 2012 12:33:15 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STANDBY>
<Mar 8, 2012 12:33:15 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Mar 8, 2012 12:33:26 PM EST> <Warning> <J2EE> <BEA-160140> <Unresolved optional
package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.
model, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, reference
d from: C:\oracle\Middleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\tm
p\_WL_user\usermessagingserver\wehyzl]. Make sure the referenced optional packag
e has been deployed as a library.>
<Mar 8, 2012 12:33:28 PM EST> <Warning> <EJB> <BEA-015036> <In the EJB MessageRe
ceiverBean(Application: usermessagingserver, EJBComponent: sdpmessagingengine.ja
r), the value for the activation config property 'connectionFactoryJNDIName' wil
l be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFacto
ry';>
<Mar 8, 2012 12:33:32 PM EST> <Warning> <EJB> <BEA-012035> <The Remote interface
method: 'public abstract void oracle.ucs.userprefs.DefaultFactStore.setBusiness
FactValue(java.lang.String,java.lang.String,java.lang.Object) throws oracle.ucs.
userprefs.UserPrefsException' in EJB 'UserPrefsDefaultFactStore' contains a para
meter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Use
rPrefsDefaultFactStore' has call-by-reference set to false, this parameter is no
t Serializable and hence will be passed by reference. A parameter can be passed
using call-by-value only if the parameter type is Serializable.>
<Mar 8, 2012 12:33:32 PM EST> <Warning> <EJB> <BEA-015036> <In the EJB MessageDi
spatcherBean(Application: usermessagingserver, EJBComponent: sdpmessagingclient-
ejb-parlayx.jar), the value for the activation config property 'connectionFactor
yJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueC
onnectionFactory';>
<Mar 8, 2012 12:33:37 PM EST> <Warning> <Connector> <BEA-190110> <Resource Adapt
er is calling BootstrapContext.createTimer() and allocating a Timer Thread that
is not managed by WebLogic Server. This may adversely impact the performance/ope
ration of WebLogic Server.>
<Mar 8, 2012 12:33:37 PM EST> <Warning> <EJB> <BEA-015036> <In the EJB DriverDis
patcherBean(Application: usermessagingdriver-email, EJBComponent: sdpmessagingdr
iver-dispatcher-ejb.jar), the value for the activation config property 'connecti
onFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDP
M/QueueConnectionFactory';>
<Mar 8, 2012 12:33:43 PM EST> <Warning> <Munger> <BEA-2156203> <A version attrib
ute was not found in element ejb-jar in the deployment descriptor in C:\oracle\M
iddleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\tmp\_WL_user\oracle-b
am_11.1.1\ert5kb\oracle-bam-adc-ejb.jar/META-INF/ejb-jar.xml. A version attribut
e is required, but this version of the Weblogic Server will assume that the JEE5
is used. Future versions of the Weblogic Server will reject descriptors that do
not specify the JEE version.>
<Mar 8, 2012 12:33:44 PM EST> <Warning> <Munger> <BEA-2156203> <A version attrib
ute was not found in element ejb-jar in the deployment descriptor in C:\oracle\M
iddleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\tmp\_WL_user\oracle-b
am_11.1.1\ert5kb\oracle-bam-ems-ejb.jar/META-INF/ejb-jar.xml. A version attribut
e is required, but this version of the Weblogic Server will assume that the JEE5
is used. Future versions of the Weblogic Server will reject descriptors that do
not specify the JEE version.>
<Mar 8, 2012 12:33:44 PM EST> <Warning> <Munger> <BEA-2156203> <A version attrib
ute was not found in element ejb-jar in the deployment descriptor in C:\oracle\M
iddleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\tmp\_WL_user\oracle-b
am_11.1.1\ert5kb\oracle-bam-eventengine-ejb.jar/META-INF/ejb-jar.xml. A version
attribute is required, but this version of the Weblogic Server will assume that
the JEE5 is used. Future versions of the Weblogic Server will reject descriptors
that do not specify the JEE version.>
<Mar 8, 2012 12:33:44 PM EST> <Warning> <Munger> <BEA-2156203> <A version attrib
ute was not found in element ejb-jar in the deployment descriptor in C:\oracle\M
iddleware\user_projects\domains\EP_SOA_DOMAIN\servers\BAM2\tmp\_WL_user\oracle-b
am_11.1.1\ert5kb\oracle-bam-reportcache-ejb.jar/META-INF/ejb-jar.xml. A version
attribute is required, but this version of the Weblogic Server will assume that
the JEE5 is used. Future versions of the Weblogic Server will reject descriptors
that do not specify the JEE version.>
<Mar 8, 2012 12:33:52 PM EST> <Warning> <oracle.sdp.messaging.driver.base> <SDP-
26024> <Registration of driver Email-Driver did not complete; will retry periodi
cally until messaging server responds.>This is what I see in the diagnostic log
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-014021> <The EJB 'EMSServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-ems-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-014022> <******** oracle.bam.ems.ejb.EMSServerRemote is bound with JNDI name:EMSServerBean#oracle.bam.ems.ejb.EMSServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-ems-ejb_jarEMSServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-149060> <Module oracle-bam-ems-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-149059> <Module oracle-bam-eventengine-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-014021> <The EJB 'EventEngineServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-eventengine-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-014022> <******** oracle.bam.eventengine.ejb.EventEngineServerRemote is bound with JNDI name:EventEngineServerBean#oracle.bam.eventengine.ejb.EventEngineServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-eventengine-ejb_jarEventEngineServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-149060> <Module oracle-bam-eventengine-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-149059> <Module oracle-bam-reportcache-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-014021> <The EJB 'ReportCacheServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-reportcache-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-014022> <******** oracle.bam.reportcache.ejb.ReportCacheServerRemote is bound with JNDI name:ReportCacheServerBean#oracle.bam.reportcache.ejb.ReportCacheServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-reportcache-ejb_jarReportCacheServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-149060> <Module oracle-bam-reportcache-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-149059> <Module oracle-bam-statuslistener-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010009> <EJB Deployed EJB with JNDI name StatusListenerEJB.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149060> <Module oracle-bam-statuslistener-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149059> <Module sdpmessagingclient-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010009> <EJB Deployed EJB with JNDI name MessagingClientBAM.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010223> <EJB Deployed Message Driven Bean: MessageDispatcherBean>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149060> <Module sdpmessagingclient-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <JDBC> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-001516> <Connection Pool "BAMDataSource" connected to Database: "Oracle", Version: "Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production".>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <JDBC> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-001517> <Connection Pool "BAMDataSource" using Driver: "Oracle JDBC driver", Version: "11.2.0.2.0".>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Common> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-000628> <Created "1" resources for pool "BAMDataSource", out of which "1" are available and "0" are unavailable.> And this is what I see in the log
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048125> <BEA-149059> <Module oracle-bam-adc-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048359> <BEA-014021> <The EJB 'BamAdcServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-adc-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048359> <BEA-014022> <******** oracle.bam.adc.ejb.BamAdcServerRemote is bound with JNDI name:BamAdcServerBean#oracle.bam.adc.ejb.BamAdcServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048359> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-adc-ejb_jarBamAdcServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048359> <BEA-149060> <Module oracle-bam-adc-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048359> <BEA-149059> <Module oracle-bam-ems-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-014021> <The EJB 'EMSServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-ems-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-014022> <******** oracle.bam.ems.ejb.EMSServerRemote is bound with JNDI name:EMSServerBean#oracle.bam.ems.ejb.EMSServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-ems-ejb_jarEMSServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-149060> <Module oracle-bam-ems-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048390> <BEA-149059> <Module oracle-bam-eventengine-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-014021> <The EJB 'EventEngineServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-eventengine-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-014022> <******** oracle.bam.eventengine.ejb.EventEngineServerRemote is bound with JNDI name:EventEngineServerBean#oracle.bam.eventengine.ejb.EventEngineServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-eventengine-ejb_jarEventEngineServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-149060> <Module oracle-bam-eventengine-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048437> <BEA-149059> <Module oracle-bam-reportcache-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-014021> <The EJB 'ReportCacheServerBean(Application: oracle-bam#11.1.1, EJBComponent: oracle-bam-reportcache-ejb.jar)' has been successfully deployed. The following remote interfaces have been bound into JNDI with the specified JNDI names:>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-014022> <******** oracle.bam.reportcache.ejb.ReportCacheServerRemote is bound with JNDI name:ReportCacheServerBean#oracle.bam.reportcache.ejb.ReportCacheServerRemote ********>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-010009> <EJB Deployed EJB with JNDI name oracle-bam#11_1_1oracle-bam-reportcache-ejb_jarReportCacheServerBean_Home.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-149060> <Module oracle-bam-reportcache-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048484> <BEA-149059> <Module oracle-bam-statuslistener-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010009> <EJB Deployed EJB with JNDI name StatusListenerEJB.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149060> <Module oracle-bam-statuslistener-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149059> <Module sdpmessagingclient-ejb.jar of application oracle-bam [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010009> <EJB Deployed EJB with JNDI name MessagingClientBAM.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <EJB> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-010223> <EJB Deployed Message Driven Bean: MessageDispatcherBean>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Deployer> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048500> <BEA-149060> <Module sdpmessagingclient-ejb.jar of application oracle-bam [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server BAM2.>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <JDBC> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-001516> <Connection Pool "BAMDataSource" connected to Database: "Oracle", Version: "Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production".>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <JDBC> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-001517> <Connection Pool "BAMDataSource" using Driver: "Oracle JDBC driver", Version: "11.2.0.2.0".>
####<Mar 8, 2012 12:34:08 PM EST> <Info> <Common> <humzalpt> <BAM2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <OracleSystemUser> <> <0000JNnNotlFg4WFLzrI8A1FMEpP000001> <1331228048859> <BEA-000628> <Created "1" resources for pool "BAMDataSource", out of which "1" are available and "0" are unavailable.> Any help is appreciated.
Thanks

Similar Messages

Two node cluster - disk not responding to selection

I'm building 2 node cluster (Solaris 10/SC3.2) on Dell's 1950/PERC6i servers with quorum as a virtual server. Because I need to introduce quorum server to the cluster - my cluster nodes are still in install mode.
I have tried to add quorum using scsetup or clsetup but I'm getting always the same message:
root@node01:~# scsetup
Failed to get node zone list
Failed to get node zone list
    This program has detected that the cluster "installmode" attribute is
    still enabled. As such, certain initial cluster setup steps will be
    performed at this time. This includes adding any necessary quorum
    devices, then resetting both the quorum vote counts and the
    "installmode" property.
    Please do not proceed if any additional nodes have yet to join the
    cluster.
    Is it okay to continue (yes/no) [yes]? yes
Unable to establish the list of cluster nodes.
Press Enter to continue:Also the most imortant issue is that immediately after restart of the first node during scinstall procedure, I started to getting those follwing messages:
Feb 4 17:33:20 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:33:20 node01      disk not responding to selection
Feb 4 17:33:21 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:33:21 node01      disk not responding to selection
Feb 4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@1,0 (sd4):
Feb 4 17:26:46 node02      disk not responding to selection
Feb 4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:26:46 node02      disk not responding to selectionBoth nodes are extreamly slow, I could use only telnet to login because of long timeouts for many services.
Here is output from: cfgadm -l
root@node01:~# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 disk         connected    configured   unknown
c0::dsk/c0t1d0                 disk         connected    configured   unknown
c4                             fc           connected    unconfigured unknown
c5                             fc           connected    unconfigured unknown
usb0/1                         unknown      empty        unconfigured ok
usb0/2                         unknown      empty        unconfigured ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured ok
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         unknown      empty        unconfigured ok
usb3/1                         unknown      empty        unconfigured ok
usb3/2                         unknown      empty        unconfigured ok
usb4/1                         usb-hub      connected    configured   ok
usb4/1.1                       usb-device   connected    configured   ok
usb4/1.2                       usb-device   connected    configured   ok
usb4/2                         unknown      empty        unconfigured ok
usb4/3                         unknown      empty        unconfigured ok
usb4/4                         unknown      empty        unconfigured ok
usb4/5                         usb-hub      connected    configured   ok
usb4/5.1                       unknown      empty        unconfigured ok
usb4/5.2                       unknown      empty        unconfigured ok
usb4/5.3                       unknown      empty        unconfigured ok
usb4/5.4                       unknown      empty        unconfigured ok
usb4/6                         unknown      empty        unconfigured ok
usb4/7                         unknown      empty        unconfigured ok
usb4/8                         unknown      empty        unconfigured okHow to solve those two problems? This one with SCSI issue and a problem with node list...
Best regards,
Vladimir

During a last weekend I have reinstalled both nodes. I rebuild virtual disks (LUNs) under PERC 6i controller. I have chosen RAID0 instead of RAID1 as it was before. Still I'm not sure did RAID0 help me or just a rebuilding disks. MegaCli tool from LSI could not help me and tell what was wrong with disk/partitions that I used with first try. For MegaCli status of controller was without errors.
Probably something was wrong with this partitioning. I used also as in first try Solaris 10 with latest patches 01/2009 and Sun Cluster 3.2 also with latest security patch.
After reinstalling everything is almost fine :-). The only difference with other productive clusters (the patch level of Solaris & SUN Cluster is not as not this test cluster) is that cacao container agent is offline:
offline        Feb_07   svc:/application/management/common-agent-container-1:default
because of that I have following service as disabled:
disabled       Feb_07   svc:/system/cluster/rgm:default
Does anyone knows, how serious is this? And how to enable now svc:/application/management/common-agent-container-1:default?
Here is svcs -xv output:
svc:/application/print/server:default (LP print server)
State: disabled since Sat Feb 07 10:42:05 2009
Reason: Disabled by an administrator.
   See: http://sun.com/msg/SMF-8000-05
   See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
        svc:/application/print/rfc1179:default
        svc:/application/print/ipp-listener:default
svc:/system/cluster/rgm:default (Resource Group Manager Daemon)
State: disabled since Sat Feb 07 10:42:06 2009
Reason: Disabled by an administrator.
   See: http://sun.com/msg/SMF-8000-05
Impact: 1 dependent service is not running:
        svc:/application/management/common-agent-container-1:default
svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
State: offline since Sat Feb 07 10:42:07 2009
Reason: Dependency svc:/application/management/sunmcagent:default is absent.
   See: http://sun.com/msg/SMF-8000-E2
Impact: This service is not running.Regards,
Vladimir

Testing ha-nfs in two node cluster (cannot statvfs /global/nfs: I/O error )

Hi all,
I am testing HA-NFS(Failover) on two node cluster. I have sun fire v240 ,e250 and Netra st a1000/d1000 storage. I have installed Solaris 10 update 6 and cluster packages on both nodes.
I have created one global file system (/dev/did/dsk/d4s7) and mounted as /global/nfs. This file system is accessible form both the nodes. I have configured ha-nfs according to the document, Sun Cluster Data Service for NFS Guide for Solaris, using command line interface.
Logical host is pinging from nfs client. I have mounted there using logical hostname. For testing purpose I have made one machine down. After this step files tem is giving I/O error (server and client). And when I run df command it is showing
df: cannot statvfs /global/nfs: I/O error.
I have configured with following commands.
#clnode status
# mkdir -p /global/nfs
# clresourcegroup create -n test1,test2 -p Pathprefix=/global/nfs rg-nfs
I have added logical hostname,ip address in /etc/hosts
I have commented hosts and rpc lines in /etc/nsswitch.conf
# clreslogicalhostname create -g rg-nfs -h ha-host-1 -N
sc_ipmp0@test1, sc_ipmp0@test2 ha-host-1
# mkdir /global/nfs/SUNW.nfs
Created one file called dfstab.user-home in /global/nfs/SUNW.nfs and that file contains follwing line
share -F nfs –o rw /global/nfs
# clresourcetype register SUNW.nfs
# clresource create -g rg-nfs -t SUNW.nfs ; user-home
# clresourcegroup online -M rg-nfs
Where I went wrong? Can any one provide document on this?
Any help..?
Thanks in advance.

test1# tail -20 /var/adm/messages
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 344672 daemon.error] Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 801855 daemon.error]
Feb 28 22:28:54 testlab5 Error in scha_cluster_get
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d5s0 has changed to OK
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d6s0 has changed to OK
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 537175 daemon.notice] CMM: Node e250 (nodeid: 1, incarnation #: 1235752006) has become reachable.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 525628 daemon.notice] CMM: Cluster has reached quorum.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node e250 (nodeid = 1) is up; new incarnation number = 1235752006.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node testlab5 (nodeid = 2) is up; new incarnation number = 1235840337.
Feb 28 22:37:15 testlab5 Cluster.CCR: [ID 499775 daemon.notice] resource group rg-nfs added.
Feb 28 22:39:05 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:05 testlab5 Cluster.CCR: [ID 491081 daemon.notice] resource ha-host-1 removed.
Feb 28 22:39:17 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:17 testlab5 Cluster.CCR: [ID 254131 daemon.notice] resource group nfs-rg removed.
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, timeout <300> seconds
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_validate>:tag=<rg-nfs.ha-host-1.2>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, time used: 0% of timeout <300 seconds>
Feb 28 22:39:30 testlab5 Cluster.CCR: [ID 973933 daemon.notice] resource ha-host-1 added.

Creation of diskset in Two node cluster

Hi All ,
I have created one diskset in solaris 9 using SVM in two node cluster.
After diskset creation, I mounted the diskset in a primary node in the mount point /test. But, the disk set is mounting on both the nodes.
I created this diskset for failover purposes, if one node goes down the other node will take care.
My idea is to create a failover resource (diskset resources) in the two node cluster.
Below are steps used for creating the disk set.
root@host2# /usr/cluster/bin/scdidadm -L d8
8        host1:/dev/rdsk/c1t9d0   /dev/did/rdsk/d8
8        host2:/dev/rdsk/c1t9d0   /dev/did/rdsk/d8
metaset -s diskset -a -h host2 host1
metaset -s diskset -a -m host2 host1
metaset -s diskset -a /dev/did/rdsk/d8
metainit -s diskset d40 1 1 /dev/did/dsk/d8s0
newfs /dev/md/diskset/rdsk/d40
mount /dev/md/diskset/dsk/d40 /test
root@host2# metaset -s diskset
Set name = diskset, Set number = 1
Host                Owner
host2                  Yes
host1
Mediator Host(s)    Aliases
host2
host1
Driv Dbase
d8   YesPlease let me know how to mount the disk set in one node.
If i am wrong, please correct me.
Regards,
R. Rajesh Kannan.

The file system will only mount on both (all) nodes if you mount it globally, i.e with the global flag or if there is an entry in /etc/vfstab that has a global option.
Given your output below, I would guess you have a global mount for /test defined in /etc/vfstab.
Regards,
Tim
---

Creating a Two Node Cluster

Good afternoon,
I'm looking to build/create an inexpensive two node cluster. I have a SLES11SP1 server that is running XEN as a virtual hosting server, I run about five servers in a virtual environment. I have three USB drives set up to host my Guest servers, what I would like to do is to purchase another USB drive, so that I can use that as an iscsi/SAN server location, it would be 2TB in size, and then I would build my new servers making them cluster enabled. They should then be able to "see" the SAN/iscsi/storage location.
Does anyone have any further suggestions?
Thanks
-DS

Originally Posted by gleach1
while I wouldn't recommend running servers off USB drives (unless this is for testing), I don't see any issue in doing it but the performance may not be fantastic
I really appreciate your responding back and assisting in this testing. This cluster is for testing only, I have a small server farm in my basement, and I have a customer that is using clustering and I would like to at least be able to have something to test with
I've actually run a test cluster off a USB drive using vmware workstation before and it seemed to run fine just as a test system
If you set up your xen host as an iscsi server, use the USB disk as the storage you present to the guests and set them up with iscsi initiators it should work like any other iscsi san would, obviously a touch slower...
Is there some documentation that explains how to do the iscsi server setup that you described? I have the "Configuring Novell Cluster Services in a XEN Virtualization Environment" but I really don't see anything about the iscsi initiator setup, I was going to add the USB drive as a /storage volume on the XEN host, and then point the cluster to that? I will also be adding a third card to handle the clustering network.

Do I need 3 machines for Sun Two-Node Cluster HA for Apache?

The vendor is trying to set up a Sun Cluster HA for Apache and said it requires a dedicated machine
for monitoring purpose(The Sun Cluster HA for Apache probe??). Is this monitoring machine mandatory and have to be dedicated for that purpose? And can I use 1 machine to monitor more than 1 cluster? Because the vendor requires 2 extra machine to monitor 2 set of 2-node cluster..and the document I read from Sun only mentions the 3rd machine is required for admin console.
Also, if I only have 2 node cluster, can I configure Apache as a scalable + failover service at the same time or I have to choose either one? Thanks!!

Incorrect. You can set up a Solaris Cluster on a single node if you wish although two nodes give you redundancy. The probe for Apache runs from the node on which Apache is executing.
If you have a two node cluster you could have multiple implementations of Apache: fail-over and scalable. You can mix them until you run out of resources: CPU, networking bandwidth, IP addresses, etc.
Tim
---

New Howto guide available: HOW to INSTALL and CONFIGURE A TWO-NODE CLUSTER

Hi,
I am not sure that this has been posted or not. But for all of us who are too lazy (like myself) to read the full set of documentation, or who have not enough time, please have a look at this short document with screen shots that explains how to setup a simple two-node cluster.
http://www.sun.com/software/solaris/howtoguides/twonodecluster.jsp
I still recommend to browse through the "Sun Cluster Concepts Guide for Solaris OS" http://docs.sun.com/app/docs/doc/819-0421
Have fun
Hartmut

I am afraid there is no such document. But I can try to give you some hints.
N+1 can be seen as two things:
- the phsical setup of the cluster and
- the logical configuration of services
A physical N+1 setup would mean, that you have one server that is connected to all shared storage, but the other N nodes are only connected to the shared storage they need.
This configuration would also need the logical N+1 setup, namely that all HA services could only run on 2 nodes, their primary node and as a backup this one dedicated node that is connected to all shared storage.
If you do not have the physical N+1 setup, you could easily have a logical N+1 setup, by having a N*N topology, j.e. all nodes connected to all storage, but logically each service again would have only 2 nodes on its nodelist.
It seems that the second option is the one that is used more often, as ift offers you the ability to reconfigure things in case of failures.
With regards to asymmetric and symmetric I am not quite sure what you mean: And I do not think that these terms are used in the SC docs.
What I can think of is, that asymmetric means that you have one node being active with 1 or more HA services and have one inactive secondary node as a backup.
Regards
Hartmut

How to install Enterprise manager on two node cluster

Hi,
I am new to Oracle working on 10g
can anyone post a document or link for step by step installation of oracel 10g enterprise manager on a two node cluster?
Thanks in advance.

userArshad wrote:
Thanks Hans.
To be specific I have to install Database control .that means I need to use the GUI .
Also I could see database control and DBconsole service on on 1st node but I cannot find that in 2nd node.That is the normal configuration - you use the DB Control from node 1 and it gets the information using the agent on Node 2. The DB Console then displays the information for both nodes.
Please note that the DB Control will place a relatively heavy load on each machine, which is why we want to restrict our load to the agent. It is for that reason that we prefer to use the Grid Control whenever possible - it provides the same mechanism and screens, but the JEE platform is on a separate machine and all you have on the RAC nodes is the agent.
But if you really want to run the DB Console from each node (again, not normally needed) you need to use emca to configure it on the second node. Metalink note 863631.1 should help you with that.

Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?

Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aa

I think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Simple two node Cluster Install - Hung after reboot of first node

Hello,
Over the past couple of days I have tried to install a simple two node cluster using two identical SunFire X4200s, firstly following the recipe in: http://www.sun.com/software/solaris/howtoguides/twonodecluster.jsp
and when that failed referring to http://docs.sun.com/app/docs/doc/819-0912 and http://docs.sun.com/app/docs/doc/819-2970.
I am trying to keep the install process as simple as possible, no switch, just back to back connections for the internal networking (node1 e1000g0 <--> node2 e1000g0, node1 e1000g1 <--> node2 e1000g1)
I ran the installer on both X4200s with default answers. This went through smoothly without problems.
I ran scinstall on node1, first time through, choosing "typical" as suggested in the how to guide. Everything goes OK (no errors) node2 reboots, but node1 just sits there waiting for node2, no errors, nothing....
I also tried rerunning scinstall choosing "Custom", and then selecting the no switch option. Same thing happened.
I must be doing something stupid, it's such a simple setup! Any ideas??
Here's the final screen from node1 (dcmds0) in both cases:
Cluster Creation
Log file - /var/cluster/logs/install/scinstall.log.940
Checking installation status ... done
The Sun Cluster software is installed on "dcmds0".
The Sun Cluster software is installed on "dcmds1".
Started sccheck on "dcmds0".
Started sccheck on "dcmds1".
sccheck completed with no errors or warnings for "dcmds0".
sccheck completed with no errors or warnings for "dcmds1".
Configuring "dcmds1" ... done
Rebooting "dcmds1" ...
Output from scconf on node2 (dcmds1):
bash-3.00# scconf -p
Cluster name: dcmdscluster
Cluster ID: 0x47538959
Cluster install mode: enabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.248.0
Cluster maximum nodes: 64
Cluster maximum private networks: 10
Cluster new node authentication: unix
Cluster authorized-node list: dcmds0 dcmds1
Cluster transport heart beat timeout: 10000
Cluster transport heart beat quantum: 1000
Round Robin Load Balancing UDP session timeout: 480
Cluster nodes: dcmds1
Cluster node name: dcmds1
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x4753895900000001
Node zones: <NULL>
CPU shares for global zone: 1
Minimum CPU requested for global zone: 1
Node transport adapters: e1000g0 e1000g1
Node transport adapter: e1000g0
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=0
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Node transport adapter: e1000g1
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=1
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Cluster transport switches: <NULL>
Cluster transport cables
Endpoint Endpoint State
Quorum devices: <NULL>
Rob.

I have found out why the install hung - this needs to be added into the install guide(s) at once!! - It's VERY frustrating when an install guide is incomplete!
The solution is posted in the HA-Cluster OpenSolaris forums at:
http://opensolaris.org/os/community/ha-clusters/ohac/Documentation/SCXdocs/relnotes/#bugs
In particular, my problem was that I selected to make my Solaris install secure (A good idea, I thought!). Unfortunately, this stops Sun Cluster from working. To fix the problem you need to perform the following steps on each secured node:
Problem Summary: During Solaris installation, the setting of a restricted network profile disables external access to network services that Sun Cluster functionality uses, ie: The RPC communication service, which is required for cluster communication
Workaround: Restore external access to RPC communication.
Perform the following commands to restore external access to RPC communication.
# svccfg
svc:> select network/rpc/bind
svc:/network/rpc/bind> setprop config/local_only=false
svc:/network/rpc/bind> quit
# svcadm refresh network/rpc/bind:default
# svcprop network/rpc/bind:default | grep local_only
Once I applied these commands, the install process continued ... AT LAST!!!
Rob.

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

TS1292 There are two numbers that are not visible in the middle of the code What can I do?

There are two digits that are not visible in the middle of the itune code. How can I still access this card?

Click here and request assistance, supplying as much of the code as you can.
(74408)

How do I view two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

see my reply in your other post:
You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

TS1389 I down loaded two songs one right after another and the second one keeps telling me that my computer is not authorized to play it

I downloaded two songs right after each other and the second one keeps telling me that my computer is not authorized to play it (I'm the only user). When I put in the information it told me that my computer is already authorized to play the song and a second computer is too. WHY?

That suggests the track is damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

SOA 11.1.1.5 two Node Cluster BAM not starting on the second Machine

Similar Messages

Maybe you are looking for