SOA EM down after password change - OracleSystemUser is not a valid user principal in the current security realm

Hello,
I've got a SOA Suite development environment set up and whilst trying to change the weblogic password using this tutorial a problem arose with my soa managed server.
Firstly I was unable to start the Managed SOA server due to mismatching passwords, and after I modified the boot.properties file, now I cant start the usermessagingserver and soa_infra applications due to the following error:
Error 1
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application usermessagingserver on target soa_server1 RUNNING.
Start Up operation for application usermessagingserver on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(sdpmessagingclient-ejb-parlayx.jar)
Unable to deploy EJB: MessagingClientParlayX from sdpmessagingclient-ejb-parlayx.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'MessagingClientParlayX(Application: usermessagingserver, EJBComponent: sdpmessagingclient-ejb-parlayx.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application soa-infra on target soa_server1 RUNNING.
Start Up operation for application soa-infra on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(hw_services_wls_ejb.jar)
Unable to deploy EJB: ASNSInteraction from hw_services_wls_ejb.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'ASNSInteraction(Application: soa-infra, EJBComponent: hw_services_wls_ejb.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
I've checked both weblogic and OracleSystemUser users and their groups are (respectfully) Administrators and OracleSystemGroup.
I've searched for an answer to this problem and found this other support article but couldn't resolve the issue.
The weblogic server version is 10.3.2.0 and it's running on RedHat Linux.

@Sri_Sonti
In the Admin Console, I can see both users in the security realm with the following configs:
weblogic:
all atributes with the "value" column blank
groups: Administrators
OracleSystemUser
all atributes with the "value" column blank
groups: OracleSystemGroup
Also I have not found the system-jazn-data.xml file you mentioned. In that folder there's only a readme.txt file.
Best Regards,
luismcs
Enter Cookie as format:
(ex: name=val;) separate with ';'
OKCancel

Similar Messages

After password changed, Gmail is not working on iPad mail apps.

After Gmail password changed, iPad mail app's not working.
I changed password on ipad setting too.
But its showed ' Theuser name or password for "Gmail" is incorrect. '
I can use Gmail from safari.
Why?

Try this. Even if the outgoing primary server states that the username and password are optional, fill them in anyway.
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails.

Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

AD password change comes up, user changes password.
Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
""An error occurred in the underlying security system. Key not valid for us in specified state."
I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue. Now that I've got a second user with the same issue, its looking like a bug/issue and
not a random glitch.
Thanks in advance for any and all help with this!

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Skype account crash after password changing

Hello,
in the morning I checked which of my devices are connected to the same Skype ID and I saw about 3 devices with showplaces. I typed /remotelogout and changed my password. The problem is that after the password changing proccess my Skype Account was blocked even with the new password after a PC Restart. This is another account of mine.
Now, I can't access my account(the system says that the password or username may be inccorect, which is not true), nor change that password to gain my access back because I have forgotten my e-mail(and log in dates) of that Skype account. What should I do?
If necessary to check the stuck Skype ID, I will give to an Administrator via PM, the new password, the old one and the ID.
Thanks in advance!

You will need the original email account to restore your password. If not the only way you can restore it is by contacting customer support:
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?q=support
You can allways try to reset your Skype:
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

The login page of EM lost just after password changed

hi,
recently, i changed the passwords of SYS, SYSTEM, SYSMAN. when i tried to manage the system through a browser again, i found there is no way to login EM then. I tried to change the passwords back to the previous passwords which created during installation, I wrote 'alter user SYSMAN identified by abc-123' within the sqlplus window and run the statement, but i got a message: 'ORA-00922: missing or invalid option'.
so, how can i change back the password for the system users?
or, what should i do after passwords changed, so that let the login page come back?
thanks!
----guo.

This is because you haven't made changes in emoms.properteis file because password used by the oms are located in the
$ORACLE_HOME/sysman/config/emoms.properties files
Any way problem is curable
1 Go to DBHOME/bin ,Issue comamnd
alter user sysman identified by "abc-123",
2 Go to OMSHOME/bin
emctl stop oms
3 change the repository password by using comamnd setpasswd oms ,
4 Start the oms and try to login again
This is not supported way of changing the passsword , You should use the configuration ui to change the password for the Management Services and Repository target. That is the correct, supported way of setting the password for that target.

HT201320 I changed my yahoo password but now can not access mail on my iPad The settings for email is not a hot link

I changed my yahoo password but now can not access mail on my iPad The settings for email is not a hot link

Go into setting on the iPad
Mail, Calendar, contact...
Tap your email account
back out the dots and enter the correct passcode.

My iPad asks for my iCloud password but I can not. that I can do? the problem is that I try to access it by putting my email but I do not remember which was which I put.

my iPad asks for my iCloud password but I can not. that I can do? the problem is that I try to access it by putting my email but I do not remember which was which I put.

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

TS2446 I know my apple ID password but apple will not let me make any purchase without my security Questions, which I can not remember the answers to which is crazy as I have already made purchase and have £10 on my account still to be redeemed!! Please h

I know my apple ID password but apple will not let me make any purchase without my security Questions, which I can not remember the answers to which is crazy as I have already made purchase and have £10 on my account still to be redeemed!! Please help

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE131
Call them up, and let them know you would like to be transferred to the Account Security Team.
HT5312: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312

Disable AD user after first successful login (after password change) after x amount of days regardless of activity

I've been searching for over a week high and low now trying to find a way to do this via PS.
We'd like to lockout certain users (we can put them in a group/OU) 30 days after their first successful log in - the one requiring
password change by them.
And we'd like to disable it REGARDLESS of their activity.
All the tips and scripts I've found look for 'inactivity', date created etc.
Only parameters I need are 30 days AFTER the first log in. Accounts might be created 60 days before actual use, but still need to be disabled 30 days after their first successful log in.
Any tips would be GREATLY appreciated!

I don't think you're going to get the kind of solution you want via scripting. As jrv noted, usually this kind of issue is managed by using account expiration and password expiration. If that won't work for you, then I would recommend looking into supported
third party tools that can help you get where you need to go.
-- Bill Stewart [Bill_Stewart]
As Bill points out you need to look into third party tools. If there is any legitimate legal or industry need for this then there wil be third party tools. Having worked in medical software systems \I can tell you there is not. There are
old systems that use now-obsolete mechanisms that do things similar to what you are asking. They are no longer usable.
I think if you sat down with those asking you to do this and had them get the actual industry and government rules on the table you would see that this is not what they are asking you to do. It aslo doesn't make much sense from a technical standpoint.
Just set the password expiration. That is what it is designed for. To force reauth just set the account so the user cannot set the password. Use the reauth web page to allow the user to set a new password. Use the corporate disclaimer
or a desktop link to notify users what to do when the password expires.
¯\_(ツ)_/¯

Outlook prompting for password after password change

I have a client who has Exchange 2013 and the PCs run Windows 8.1 with Office 2013.
The users just started having the following problem. Their domain passwords are expiring and when they update them with a new one, Outlook starts prompting them for a password when they open it and periodically while Outlook is running. They keep entering
the new password and checking the box to remember it, but the password prompt keeps coming back.
I've checked and the account in Outlook does not have the box checked to always prompt for logon credentials. I did notice that the proxy authentication is set for NTLM so I changed it to Basic, restarted Outlook and there was no password prompt and the
user has not seen one since.
Any idea why having the proxy authentication set to NTLM would cause this after the domain password changed? It has been set to NTLM rather than Basic for years now. Exchange 2013 has been in use there for about 6 months and Office 2013 longer than
that. Windows 8.1 has been on the computers for 3-5 months so I don't think that's it either. I've tried with our domain account we have setup there and with a test user account by changing the password on them but with the proxy authentication set to NTLM
I haven't had the password prompt appear other than once the next time Outlook is opened after the password change, and that is to be expected.
So it's not every user account but a good number of them this is happening with.
Jonathan

I have an update.
There must be a GPO or setting in Outlook changing the proxy authentication to NTLM because this morning it was changed back to NTLM from Basic. They all either shut down or restarted their computers since I worked on them Friday.
One user got the password prompt one time when starting Outlook. She entered the password and that was it. But she was unable to connect to a shared calendar. She put her computer to sleep, woke it up, logged in, and then was able to connect to the shared
calendar. I don't understand that.
Another user could not get the password prompt to go away this morning no matter how often he input his password, and he also was unable to connect to the shared calendar. So I changed the proxy authentication back to Basic again, restarted Outlook (which
is required), got no password prompt, and he was able to connect to the calendar.
I realize the calendar issue is tied to the password issue. What I don't understand is why these people are getting the password prompt ever since they changed their domain password.
I have a test account and test PC set up in a VM and it does not have any of these problems. I've changed its password 3 times but I never get a prompt when opening Outlook and it is set to NTLM.
I hope someone out there has an idea why changing their password now is causing this authentication problem in Outlook.
Jonathan

TS3899 Email stopped working after password change

I changed my att.net password after my account was hacked and used to send a spam email to my entire address book. Now my iPad email will not work and I get a message that my user name or password are incorrect. I have changed the password in my iPad mail settings to match my new password at att.net. I have looked at the iPad support stuff on mail problems and have shut down my iPad to no avail. I have two emails in my iPad outbox that have not been sent and I cannot receive new emails.
ANY SUGGESTIONS.

Howdy scad_mfa,
Welcome to Apple Support Communities.
It sounds like you’re running into issues sending and receiving iMessages on your notebook after changing the password for your iCloud account. The article linked below will walk you through the process of updating the Apple ID information used by Messages and other Apple services on your devices.
What to do after you change your Apple ID email address or password - Apple Support
Mac with OS X Mountain Lion or later
Open the Messages app, select Messages > Preferences, then click the Accounts icon.
If you're signed out, click Accounts and sign in with your updated Apple ID or password.
If you're signed in with your previous Apple ID, click Accounts, then select your Apple ID from the list of accounts. Click Sign Out, then click Sign Out again when asked to confirm. Sign in with your updated Apple ID or password.
Take care,
-Jason

Admin permanent status gone after password change

Hi everyone.
a couple of days ago i decided to change my password as good safety measure. changed as usual, only getting a message about keychain and a possible need to do the change in it after unlocking. seemed pretty standard to me, don't know if it is. (6 month mac user...)
however, for some strange reason, afterwards the change, even if i am still an admin in the user accounts i have to identify myself with pass every time i need to do some change in admin areas, as changing the apps in the apps folder.
i seem to be working as a standard guest , needing to elevate my status every time i need to something standard as changing my apps or renaming them.
i've tried correcti the permissions in the disk utility and also tried to repair my keychain, without great sucess.
anyone knows how can i get my permanent admin status again? it's a pain to need to type a password every time i want to drag and drop an app!
Filevault is active on my home folder.
thanks for your help
filipe

Macbook-de-Filipe:Applications filipe$ ls -aldeO /Applications/scilab-5.1.1.app
drwxr-xr-x@ 3 filipe wheel - 102 17 Abr 20:42 /Applications/scilab-5.1.1.app
for example this one. an app in Apps folder i wanted to update
i didn't changed app folder permissions before. i believe all this weird behaviour appeared after i changed my password.is there a system log i can see?
i was cheking the app folder permissions and is :
system : read and write
wheel : read
everyone: read
i haven't changed them before but i have found that if i had a admin group with read and write permissions i can have back my standard usage. however i don't know the implications of this and don't like treating the symptom, prefer instead to treat the cause
thanks for your help V.K.

MobileMe iPhoto galleries not syncing after password change

After changing the MobileMe Password iPhoto does not recognize the properly configured MobileMe Account anymore.
All other Applications with MobileMe Upload/Sync/Publishing capability (iMovie, Aperture, MobileMe-Sync) still work flawless. After trying to publish a Photo to a MobileMe Gallery or clicking on an prior uploaded MobileMe , the MobileMe "Are you already a member" (Translated from German) screen pops up, asking me to login into MobileMe. A second windows states "An error occured with the publication of album "ALBUMNAME". Your MobileMe Account Information is not correct. The provided login or password is not valid" (Translated from German)."
Even in the iPhoto Preferences/Setting under the "Web" Tab the used and max iDisk Capacity is not shown.
After changing the MobileMe Password iPhoto does not recognize the MobileMe Account anymore.
I'm having this problem on my late 2007 MacBook Pro 2,4GHz
On my second Mac at home evrything works just fine, even in iPhoto.
I've tried several things to solve this problem:
- Logging Off & On with fake MobileMe username/password in the MobileMe Setting in System Preferences
- Updating the password in publish.me.com in the keychain
- replacing the keychain on this Mac (MBP) with the keychain from my Mac at (both have latest Snow Leopard and iPhoto Version)
- deleted the com.apple.iPhoto.plist
I took information/suggestions from these forum posts:
http://discussions.apple.com/message.jspa?messageID=8168945
http://discussions.apple.com/thread.jspa?messageID=10235638&#10235638
http://discussions.apple.com/thread.jspa?threadID=1904914&start=0&tstart=0
http://forums.macrumors.com/showthread.php?t=689762
Any advice/ideas?
Thanks
Oliver

http://discussions.apple.com/thread.jspa?messageID=10404438&#10404438
found that thread and looked in the keychain - indeed it was still the old password - changed it and now working again...

%ONLINE-SP-6-REGN_TIMER: multiple line cards down after config change

Hi,
I was wondering if someone could help.
I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understand how module 7 and 8 can go down on both switches. Initially I thought it maybe due to IOS bug 22-33.SXI2a.bin" so I upgraded it to s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin but it still down.
These are the actions I have carrried out to try resolve the issue:
- Reverted back to orginal configs but no luck
- Tried to use "power enable" command but the status light on both modules seems to turn red and then go off again.
- I have also tried to put one of the fibre modules into a different slot but no joy
- Upgraded the IOS from 22-33.SXI2a. to 122-18.SXF12a
I am running out of ideas.. can anyone help ? I am sure that hardware fault cannot occur on BOTH modules 7 & 8 on BOTH switches after config change.
The error in the log shows that modules "failed to bring online because of registration timer event". I understand this means that it is unable to download the image within the allocated time.. maybe I could manually copy the image onto the line card if that is possible ?? any ideas ?
Daughterboard         WS-SUP720          SAL135063V2 4.0    Ok
7 Centralized Forwarding Card WS-F6700-CFC       SAL1419HKJK 4.1    PwrDown
8 Centralized Forwarding Card WS-F6700-CFC       SAL1419HAG0 4.1    PwrDown
Mod                                                      Hw    Fw           Sw           Status
7 5475.d016.075c to 5475.d016.075f   3.1   Unknown      Unknown      PwrDown
8 5475.d0bb.7404 to 5475.d0bb.7407   3.1   Unknown      Unknown      PwrDown
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin"
BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin,12;sup-bootdisk,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
May 28 17:25:10.352: %C6KPWR-SP-4-DISABLED: power to module in slot 7 set off (Module Failed SCP dnld)
May 28 17:25:10.452: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
sm(cygnus_oir_bay slot8), running yes, state wait_til_online
Last transition recorded: (disabled)-> disabled (disabled)-> disabled2 (restart)-> wait_til_disabled (timer)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
May 28 17:25:10.452: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
May 29 11:41:16.601: %SYS-5-CONFIG_I: Configured from console by console

Would anyone know if the line cards are maybe failing due to Embedded Event Manager configuration ? The person who configured this lab has left the company so I am not sure what the EEM configurations actually mean.
The reason i am suspecting the EEM configuration is because the error in the log seems to suggest the module failed due to registration timer event.
May 30 14:47:00.366: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
Just trying to check all the possibilities as I have tried everything else,
event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.x.x/xxx/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60 event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.216.145/FCPD/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60

SOA EM down after password change - OracleSystemUser is not a valid user principal in the current security realm

Similar Messages

Maybe you are looking for