SOAP ADAPTOR unable to pick the file

hi,
two communcation channel were inactive /un initilized status.
it seems soap adaptor is not picking the message. payload is cant read error generated.
files are not coming in to the xi system.
regards,
krushi

hi,
are you having webservice at one side,so you are using soap adapter.
If you have to pick the file only then go for file adapter only.
And make your adapter active(by default) in your communication channel.
IF still inactive then try to reconfigure it.
And do one test then it will become active or else it will be unused.
reward points if helpful.
regards,
ujjwal kumar

Similar Messages

B2b unable to pick the file from xml gateway

Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnu

Anuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

Problem in Picking the file in FTP to RFC Scenerio

Hi,
I am using FTP to RFC scenerio, i have a CSV file and need to use file Content COnversion at the sender Communication Channel. But its not picking up the file from my FTP..
My data is like
11    Munish     IT
My Message Type is like :
MT_ABAPPROXY ->
             HEADER    ->>
                                Empno
                                Empname
                                Departmentname
My Communication channel is like this..
Transport Protocol:FTP
Message Protocol:FIle COntent COnversion
SOurce Directory : /
File name:            file.csv
then Server name and port is corrwctly configured
My messe Content COnversion is like this
Doc Name:MT_ABAPPROXY
Namespace:http://www.munnamespace.com
Recordsetname:Details
Rec Str :            HEADER,*
HEADER.fieldSeperator     ','
HEADER.fieldNames    Empno,Empname,Departmenname
HEADER.lastFieldsOptional   YES
HEADER.fieldFixedLengths    12,24,24
ignoreRecordsetName         true
HEADER.endSeperator     'nl'
But it is unable to pick the file , but if i wont use file conten conversion , it picks but it has no use as the date is not in XML
SO kindly help me in solving this as the problem is mostly in File COnetent Conversion
Thanks
Munish SIngh

Hi arvind,
thankd for the reply,
i have done the same what u said but i am getting this error in communcation channel monitoring (RWB)
     Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'HEADER':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this

File Adapter as Sender not picking the files

We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
In OS we have folder to read the file, but SAP XI unable to read the file.
To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
Now we have compared the Attributes of the path
the only difference in file attributes
Coded character set ID . . . . . . . . :   819
CCSID 819 (decimal)
0333 (hex)
Name ISO 8859-1 ASCII
Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
Notes Related CCSID with euro is 923
able to read the file attributes:
Coded character set ID . . . . . . . . :   1252
CCSID 1252 (decimal)
04E4 (hex)
Name MS-WIN LATIN-1
SC Co-existence/Migration
FMS Subset
Registration Date
Description MS Windows, Latin-1
Notes CCSID for this code page with euro is 5348
We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
Please suggest me where i am doing wrong here
Thanks,
Venkat.

Hi,
Check the file path & file name , Check the processing mode parameter which you have set?
Check the folder properties & provide all the permission ...
Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
Hope it helps...
Regards,
Kumar.

Unable to Receive the File into Target Directory Using FTP

Hi All,
Here I Did Simple File-File Scenario With FTP.
Iam Able to Pick the File From the FTP Location And File has been Deleted From Source Location ( Set the Processing Mode as Delete ).
Unable to See the Pipeline Steps in Moni, But Able to Se the Success Message With the Inbound Payload only.
Also chked with the comm. channel of sender and receiver, where the sender shows the message process details but not the receiver comm. channel.
Regards
Giri

You Did the right thing in communication channel that u selected the IS.
Hi
Just check out if you sending the correct parameters and also check out the payload you sending and check out in SXMB_MONI for you message that after success wat is the payload and match with your input.
Rather, for input check, In IR, get the XML data from ur Message Mapping and then save it to your inbox that is input directory.
Also check out the permission of Output directory and also check the configuration of sender and reciver communication channel.
Regards
Aashish Sinha
PS : reward points if helpful

Unable to convert the file name in Target directory

Dear Experts,
Currently iam facing a problem with some files.my interface is a File to file .As per the interface the sender will pick the flatfiles from source directory which the file name was BNP_NE201.txt once my file reached to target directory the name of the file willrenamed as VENDOR_Payment.NE201 automatically for this they have done some OS level script in receiver communication channel of the first interface which we have added "un operating system command after message processing" in processing parameters tab.again one more sender comm channel wil pick the file from first target directory which is having naming convesion of "VENDOR_Payment.NE201 " and post it to target. all the two interfaces are file to file (NFS) . for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
from our side i check every thing .could you please suggest me the way to approch
Reagrs,
Kiran tanuku

>> for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
You need to wait until the file is converted. After when it is converted then the second interface sender communication channel will pick the files.
What do u mean by unable to convert?
Is it unable to do the content conversion? if so then check the data as you said that it sometimes it works fine.
> The best approach is to change the name of the file in the receiver communciation channel instead of using a script.
Thanks,

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Pick the file from FTP Server and place it on the App. Server of R/3

Hi Guys,
I had a requirement where i need to pick the file from the FTP Server and place it on the Application Server in R/3. If anybody has an Idea on acheiving this or if anybody has the piece of Code Snippet to acheive the same, Help me out.
Regards,
Kittu Chowdary.

hi kittu,
chk the demo programs RSFTP00* if they can help u

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Error in picking the file from folder

If I have 100 files in a folder, if XI comes and picking the files from the folder, while picking 50 files connection was lost in between and they are remaining 50 files are there to pick, in this scenario what happens after connection established XI will collect remaining 50 files or again it starts from first.
Can anyone answer this question with explanation.

This depends on what you have configure in
Processing parameters for File Sender communication channel:
Processing mode:
1. Archive : if you have set processing Mode as Archive then after reading the file, PI will transfer the file to Archive dir mentioned and will not consider in future for reading.
2. Delete : if you have set processing Mode as Delete, Then after reading the file PI will delete the file from FTP.
3. Test : If you have set processing Mode as Test ,then PI will keep the file as it is after reading so it will read the same file in future.
Thanks
Bhupesh

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

Unable to delete the file. (Some times deletes and sometime fails to delet)

Please help me in deleting the file from the temporary location .
Below is my code
//Append the session is with filename as there is possibility of having same name of file.
try{
boolean isMultipart     = ServletFileUpload.isMultipartContent(request);
          if (isMultipart)
               // Create a factory for disk-based file items
               factory = new DiskFileItemFactory();
                        // Create a new file upload handler
               upload = new ServletFileUpload(factory);
               // Parse the request
                  List /* FileItem */ items = upload.parseRequest(request);
                       // Process the uploaded items
               Iterator iter = items.iterator();
if(strInputFileName.lastIndexOf("\\")== -1)
     strInputFileName = (String)mPropBag.get("TempUploadDirM") + strInputFileName;
}else
     strInputFileName = (String)mPropBag.get("TempUploadDir") +   strInputFileName.substring(strInputFileName.lastIndexOf("\\"));
strInputFileName = strInputFileName + "_" + request.getSession().getId();
uploadedFile     = new File(strInputFileName);
item.write(uploadedFile); //// I am Writing the file in this location appened with the session Id because there might //be a possibility of having same name of file.
catch(......)
finally
     uploadedFile.delete();
     uploadedFile = null;
     upload = null;
}I am unable to delete the file from the temporary location
some times it is deleting and some times it is not deleting.. I have also tried ...deleteOnExit();

Make sure you've got no other processes holding onto it (Windows Explorer, for instance) and that you've closed any streams involved with the file. If that fails, try calling System.gc() just before deleting the file. This is a workaround for a bug in certain JVMs on Windows machines

Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name:      System
Source:        Microsoft-Windows-FailoverClustering
Event ID:      1564
Task Category: File Share Witness Resource
Level:Critical
User:          SYSTEM
Computer:      PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID:      1177
Task Category: None
Level:       Critical
User:     SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */

Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */

Sender file adapter is not picking the file from windows server

Hi Experts,
We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters. It is not picking the files from windows directory and not showing any error.
In this scenario, input file for sender adapter is *.xml and no content conversion.
Could any one please let me know is there anything needs to changed in file adapter.
Thanks in advance,
Sridhar. M

Sridhar,
What do you have in the directory path?
If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
Regards,
---Satish

SOAP ADAPTOR unable to pick the file

Similar Messages

Maybe you are looking for