Soap connectivity to third interfaces
Hi,
I am connecting to a third party interfaces through java code, i am doing it by using java SOAP.
I am in intranet and internet environment,
so i am setting the proxy and again reseting it after getting the response from the site.
I am passing a message(i.e, xml data) and String url(i.e the site to which i want to connect) as parameter
It,
SOAPConnectionFactory factory = SOAPConnectionFactory.newInstance();
SOAPConnection con = factory.createConnection();
request = createMessage(pMessage);
System.setProperty("http.proxySet", "true");
System.setProperty("http.proxyHost", "123.123.12.12");
System.setProperty("http.proxyPort", "8081");
System.setProperty("http.proxyUser", "myloginid");
System.setProperty("http.proxyPassword", "mypassword");
//At this site the system throw error
soapResponse = con.call(request, MYURI);
I am getting following errors
java.net.ConnectException: Operation timed out: connect
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed
Can anybody help?
Nope. Your network administrator is the one to help you.
Similar Messages
-
Bringing up a third interface - cannot ping servers
Hi All,
I have a CSS 11503 that already had 2 interfaces up and running fine. The frontend is on vlan 26 and backend server vlan is on vlan 836. Now, I have some servers on vlan 301 that needed load balancing and brought up the third interface.
Here is my config
interface 1/1
bridge vlan 836
interface 1/2
bridge vlan 26
interface 2/1 (this is the new interface)
bridge vlan 301
circuit VLAN836
ip address 10.10.235.5 255.255.255.128
circuit VLAN26
ip address 10.10.26.5 255.255.255.0
circuit VLAN301
ip address 10.44.0.5 255.255.252.0
Here is the "show ip route" output
BCMDC-CSS1# sh ip route
prefix/length next hop if type proto age metric
10.1.20.0/22 10.1.22.150 2 mgmt local -- --
0.0.0.0/0 10.10.26.1 1022 remote static 5342983 0
10.44.0.0/22 10.44.0.5 1021 local local 7122 0
10.10.26.0/24 10.10.26.5 1022 local local 5343307 0
10.10.235.0/25 10.10.235.5 1023 local local 5343288 0
Show arp contains all the servers I want to ping and here is the arp table on the CSS
10.44.0.1 00-00-0c-07-ac-1f dynamic 2/1
10.44.0.2 00-d0-02-f3-a8-00 dynamic 2/1
10.44.0.3 00-09-12-ed-6f-00 dynamic 2/1
10.44.0.20 00-11-25-9d-e4-98 dynamic 2/1
10.44.0.21 00-11-25-9d-ee-d7 dynamic 2/1
10.44.0.30 00-11-25-9d-e6-86 dynamic 2/1
10.44.0.31 00-14-5e-3c-71-38 dynamic 2/1
10.44.0.32 00-11-25-4a-82-a1 dynamic 2/1
10.44.0.33 00-14-5e-3e-60-e1 dynamic 2/1
10.44.0.34 00-11-25-9e-e5-ce dynamic 2/1
10.44.0.35 00-11-25-9c-66-c9 dynamic 2/1
10.44.0.40 00-1a-64-4f-21-bc dynamic 2/1
10.44.0.41 00-1a-64-4f-23-6e dynamic 2/1
10.44.0.50 00-1a-64-4f-2f-74 dynamic 2/1
10.44.0.51 00-1a-64-4f-22-72 dynamic 2/1
10.44.0.60 00-1a-64-4f-1c-ba dynamic 2/1
10.44.0.61 00-1a-64-4f-13-06 dynamic 2/1
I cannot ping any of the 10.44.0.x address. The interface is up and it is connected to a 6509 switch as an accessport on vlan301 and it shows up and up.
There are no ACLs configured. I am just trying to ping the servers before I can write the content rules.
Any ideas?OK. I figured out that I cannot ping the servers. But, I cannot ping the circuit vlan 301 IP from the router which is 10.44.0.5.
However, I can ping vlan 836 circuit IP like 10.10.235.5 Here is the ping result from the router where the css is connected to
gw1>ping 10.10.235.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.235.5, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
gw1>ping 10.44.0.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.44.0.5, timeout is 2 seconds:
Success rate is 0 percent (0/5) -
Replacement for Finder's "Connect to Server" interface?
The Finder -> Go -> Connect to Server interface is a bit minimal, to put it mildly.
Ideally, I'd like to be able to:
• Rename the connections ("smb://192.168.1.32" isn't very helpful)
• Organize them in folders
• Sort by name, connection type, etc.
• Specify whether or not to save user/pwd in the Keychain
Anyone know of any third-party connection-manager utilities?That's what I was thinking. I have read numerous "how-to's" about this, and all of them say that this is possible, but I think what I am really reading is "How to copy files between computers" and not "How to use a PC as a server."
Thanks again! -
SOAP Adapter (Ports and Interfaces)
Is it true that for every single interface, a new soap adapter needs to be configured? Can one soap adapter handle many interfaces?
Do I need one port for each interface or can I use one port for multiple interfaces. (note, I am using Soap Adapter)
Thanks in advance for your responsesWhen you are talking about "ports", I assume, that you are using the J2SE Adapter Framework.
Yes, you need a seperate Soap Adapter module (or in XI 3.0 J2EE Adapter Framework a seperate channel) for each interface and for each SOAP Adapter Module you need a different port.
Regards
Stefan -
ABAP source code to connect to third party systems using web service calls?
Hi all,
can any one provide an example ABAP source code to connect to third party systems using web service calls? The base system is CRM.Do you want to call a web service in a remote system, or do you want to provide a web service?
If you want to call a web service you should create a proxy object via SE80. Open your development package, right click on the tree entry and choose: Create -> Enterprise Service / Web Service -> Proxy Object and provide the needed information (including the WSDL description file). You may then use the proxy object to call the web service (if the connection and everything else works right).
See [http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm] -
Cisco ASA 8.2 55xx connect 2 inside interfaces together
Hi all,
I have some problem with my Cisco ASA 8.2 5510. I have to know how shoud i connect 2 inside interfaces together. I am writing what i have.
I have 5 network connection on Cisco ASA.
1. Interface Ethernet 0/0 - outside 200.200.200.200 255.255.255.240
2. Interface Ethernet 0/1 - 1_firm 10.0.1.1 255.255.255.0
3. Interface Ethernet 0/2 - 2_firm 192.168.1.1 255.255.255.0
4. Interface Ethernet 0/3 - DMZ-Server 10.10.10.1 255.255.255.0 (Just one Server)
5. Management - no need
I have to connect 2 Interfaces, (1_firm) with Interface (2_firm). I've tried
"route 1_firm 192.168.1.0 255.255.255.0 10.0.1.1" ,
but i resiving following error "Cannot add route,connected route exists".
But i have no route configuration. What i have cheking? Or maked i some wrong?
Thank you for your helpHi Jennifer,
Thanks for your answer.
Sec. Level 90 .
Can you write me correct NAT and exeption configuration? That is my conf.
This is my test Firewall system
ciscoasa(config)# sh run
: Saved
ASA Version 8.0(2)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Ethernet0/0
nameif outisde
security-level 0
ip address 200.100.100.200 255.255.255.240
interface Ethernet0/1
nameif vpm
security-level 90
ip address 192.168.1.1 255.255.255.0
interface Ethernet0/2
nameif wundplan
security-level 90
ip address 10.0.1.1 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/4
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/5
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
boot config disk0:/.private/startup-config
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list wundplan_access_in extended permit ip 10.0.1.0 255.255.255.0 any
access-list vpm_access_in extended permit ip 192.168.1.0 255.255.255.0 any
access-list outisde_access_in extended permit ip any 200.100.100.192 255.255.255.240
access-list wundplan_nonat extended permit ip 192.168.1.0 255.255.255.0 10.0.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu outisde 1500
mtu vpm 1500
mtu wundplan 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-625-53.bin
no asdm history enable
arp timeout 14400
global (outisde) 101 interface
global (wundplan) 1 10.0.1.0 netmask 255.255.0.0
access-group outisde_access_in in interface outisde
access-group vpm_access_in in interface vpm
access-group wundplan_access_in in interface wundplan
route outisde 0.0.0.0 0.0.0.0 200.100.100.199 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.0.1.0 255.255.255.0 wundplan
http 192.168.1.0 255.255.255.0 vpm
http 10.0.0.0 255.255.255.0 wundplan
http 192.168.0.0 255.255.255.0 vpm
http redirect wundplan 80
http redirect vpm 80
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:5cd35a1417360a176153562a9c67e266
: end
Thynk you very mach. -
CANNOT_READ_PALOAD error with SOAP to PROXY Synchronous interface
Hi,
Problem with SOAP to PROXY Synchronous interface.
In Production client, some times we are getting the below shown error in SXMB_MONI. There is no Inbound payload also.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">CANNOT_READ_PAYLOAD</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to read payload from the message object</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please suggest me to resolve this.
Thanks in advance,
Hari.Hi Hari,
In your case, check SAP Notes: 1082111 and 1060723.
Regards,
P.Rajesh -
Airplay icon disappears from iTunes when I connect a third idevice
I own an iPad 2, an iPhone 4 and Iphone 4S. After a clean install of itunes, Airplay works well. When I plug in first 2 devices (no matter which one and in what order), everything works well for several days with several reboots of PC. When I decided to connect the third device, Airplay still works but after rebooting the PC, the icon disappears completely! However I always see my 3 devices in sync by WiFi.
I made the test twice by changing the order of connections between devices, and the result is the same: Airplay works with 2 connections but no more after the third’s?
Windows 7 64bits and iTunes is up to date.Hello, I have this exact same problem -- Airport Express bought Feb. 2014 (not sure of firmware version?) Windows 8 PC, multiple iPads, iPhones in home. Wireless provider Comcast in S.F. Bay Area (using their Xfinity modem / router) extremely reliable and very fast for 10+ years.
Every few days Airport Express icon in iTunes on Windows PC turns orange and requires PC reboot. Upon reboot, streaming music works fine. Have also tried all other fixes found on Support forums, etc.
On iPhone 3GS, iPhone 4S and both iPad 2s Airport Express icon is always available and always seems to work fine.
Strangely enough, after replacing iPhone 3GS with iPhone 5s (yesterday!), Airport Express was not available on new iPhone, but after quick reboot of Airport Express, new iPhone was able to stream music...
Windows 8, iTunes, etc. updated w/ latest versions, etc.
Definitely a pain having to re-boot PC every few days to re-connect to Airport Express... -
Error 1073807302 while connecting a third party USB device,and showing invalid setup
While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk in pipe and in VIEW ATTRIBUTE Tab it is showing invalid property....
please kindly reply me.....!!!sir,without configuring in NI-MAX how can we open a connection to VISA.
If i install the device driver provided by supplier,i am not able to view my device in NI-MAX,so that, I had created and installed .inf file for my device using VISA driver wizard, In NI-MAX now I can see my device and its properties in visa interactive control.But it was showing some errors(Error-1073676418,error-1073807302,error-1073807298),in the USB settings Tab it is showing, "No pipe present in Bulk In-pipe", and in VIEW ATTRIBUTE Tab it is showing invalid property.In program it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,
While Searching in ni.com, some one posted that change the USB Alternate settings to 1/2/3,default value is 0,but now also my problem is not solved.
I am using VIATOR USB HART modem, Model 010031. -
I tried to establish a SOAP connection using the SOAP connection tutorial and got the same connection problems posted by others on this forum - i.e.
Testing connection...
[SOAPException: faultCode=SOAP-ENV:IOException; msg=Connection refused: connect; targetException=java.net.ConnectException: Connection refused: connect]
void org.apache.soap.SOAPException.<init>(java.lang.String, java.lang.String, java.lang.Throwable)
void oracle.soap.transport.http.OracleSOAPHTTPConnection.send(java.net.URL, java.lang.String, java.util.Hashtable, org.apache.soap.Envelope, org.apache.soap.encoding.SOAPMappingRegistry, org.apache.soap.rpc.SOAPContext)
org.apache.soap.rpc.Response org.apache.soap.rpc.Call.invoke(java.net.URL, java.lang.String)
org.apache.soap.rpc.Response oracle.jdevimpl.webservices.util.JDevServiceManager.invokeMethod(java.lang.String, org.apache.soap.rpc.Parameter)
java.lang.String[] oracle.jdevimpl.webservices.util.JDevServiceManager.list()
void oracle.jdevimpl.webservices.wizard.connection.TestConnectionPanel$2.run()
Unable to connect to SOAPServerConnection1 (http://127.0.0.1/soap/servlet/soaprouter) Connection test failed: unable to connect.
I have tried the connection using localhost,127.0.0.1, my host name (both name and net id, with the port as 8888 and 8988, and all combinations of these hosts/ports in both Netscape and IE. I have unchecked proxy server in both places suggested by other posts on this forum, and I did not put a user name or password in the SOAP connection wizard (although I did try it with the admin PW entered once). I also tried putting a ? mark in at the end of the URL (suggested by one of the SOAP Connection Problem answers).
I then changed the port number in default-web-site.xml from 0 to 8888, reinstalled the OC4J server, restarted it, and this didn't work, in any of the URL variations mentioned above.
Any ideas on how to make this connection work would be much appreciated.Hi, I'm new on the topic :(
I want to use the native SOAP implementation that is in 9iAS release 2, do I have to set something or make a 9iAS post-installation task for get it?, maybe installing a patch?
If I want to use the 9iAS native SOAP, do I have to deploy the soap servlet explicitily?, and if I don't, what is the SOAP Servlet URL that I have to write on the SOAP Server Connection Wizard of Jdeveloper 9.0.3? I've tryied with the Apache SOAP (deploying the soap servlet) and then I've tryied with the soap servlet page with success (http://<ip>:<port>/soap/servlet/soaprouter), but when I try to create a SOAP connection from JDeveloper on this installation, the Test Connection fails too. The message that is displayed:
"Testing connection...
Not using Proxy Server (my comment: that's true, because I have the DB and the 9iAS installation on the JDeveloper cliente machine)
java.lang.Exception
org.apache.soap.rpc.Response oracle.jdevimpl.webservices.util.JDevServiceManager.invokeMethod...
JDevServiceManager.java:255
Unable to connect to SOAPServerConnection1 (http://<ip>:<port>/soap/servlet/soaprouter)
Connection test failed: unable to connect.
I've a similar problem, have I?
Could anybody give me an advice?
Thanks a lot in advance.
Pablo Ibarra. -
About Connection, ResultSet, Statement interfaces....
hi ,
Connection, ResultSet, Statement etc.. all are the interfaces. But when i am writing the codes like,
Statement stmt= con.createStatement();
ResultSet rs= stmt.excuteQuery("select * from student_mst");
where con is the instance of Connection interface.
Therefore my question is that since all those(Connection,ResultSet,Statement) are interfaces then how the methods createStatement(),excuteQuery(String sql) are being executed where as those methods are only the declarations in those interfaces,nothing else.ok.......
So can u tell me in this case, actualy which class is
implenting the Statement interface such that
"executeQuery(String)" is working properly.....??????Hello,
First you need to understand interface and its working.. I will write one example code for u and I think this may hel how Connection, Statement and ResultSet work
This is out main Class
public class Main {
public static void main(String[] args) {
Connection con = DriverManager.getConnection();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("My Query");
rs.getString();
}Connection.java
public interface Connection {
public Statement createStatement();
}Statement.java
public interface Statement {
ResultSet executeQuery(String sql);
}ResultSet.java
public interface ResultSet {
public String getString();
}DriverManager.java
public class DriverManager {
public static Connection getConnection() {
System.out.println("Calling getConnection()...");
return new ConnectionImpl();
}Following are the implementstions of the interfaces
ConnectionImpl.java
public class ConnectionImpl implements Connection {
public Statement createStatement() {
System.out.println("Calling createStatement()...");
return new StatementImpl();
}StatementImpl.java
public class StatementImpl implements Statement{
public ResultSet executeQuery(String sql) {
System.out.println("Calling executeQuery()...");
return new ResultSetImpl();
}ResultSetImpl.java
public class ResultSetImpl implements ResultSet{
public String getString() {
System.out.println("Calling getString()...");
return "My String";
}And the Output is
Calling getConnection()...
Calling createStatement()...
Calling executeQuery()...
Calling getString()...
I suppose now you can understand how the Connection, Statement and ResultSet interfaces work -
SOAP.connect in RE-enabled Reader doesnt work
Hi,
I created a form with Designer 7, connecting to a webservice via script, based on serveral samples found in this forum:
var service = SOAP.connect(cWSURL);
This works perfect in Acrobat 7.
It is saved as dynamic pdf.
When I right-enable this pdf with ARES 6,
shouldn't it work in Reader too?
I get a "NotAllowedError" when calling SOAP.connect...
Making a dataconnection to WSDL on the same form works,
but I need more control, because I have to call several webservice-functions with multiple parameters.
please help
thanx
berndthank you for your fast reply!
this was my first thougt (hope) too,
so I have ARES 6 and ARES 7 now,
running into new problems:
I am not able to extend a Document created with Designer 7 German with ARES 7, but this is already a different post:
bernd amm, "Can't extend Document created with Designer 7 (German)" #, 3 Feb 2006 5:58 am
But now I know that I am on the right way...
Thank you again -
Strange behaviour in SOAP connection mode
Hello,
I created a custom worklist app using SOAP connetion mode and I experiencing strange behaviour using it.
Sometimes it works and sometimes not. The only difference beetwen the two working config is nearly nothing. Just server restart are performed to make it work or not. No config files or applications deployement are done between two restart.
So It's lotery to get it work.
When it doesn't work, I have the following error messaging (see below)
Does anyone have a clue to get it work each time ?
Regards.
ORABPEL-30509
Error in invoking task query service.
A client side error occured in invoking the task query service.
Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:183)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:200)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:93)
at eu.eca.itt.eworkflow2.controller.action.TaskListAction.process(Unknown Source)
at eu.eca.itt.eworkflow2.controller.action.TaskListAction.execute(Unknown Source)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
at javax.xml.soap.SOAPConnectionFactory.newInstance(SOAPConnectionFactory.java:32)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:131)
... 29 moreI also tried to change connection setting with
System.setProperty("javax.xml.soap.SOAPFactory", "com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl");
System.setProperty("javax.xml.soap.SOAPConnectionFactory", "com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory");
I get it work for ....... a day (or a restart I suppose) reverting back to initial settings to make it work again.
Does It mean SOAPConnectionFactories gets corrupted upon restart once I used them ?
Is a Service Request a good idea ?
Regards. -
How can we find the hostname of the devices connected with the interfaces of switch?
how can we find the hostname of the devices connected with the interfaces of switch ? I have tried mac address and ARP, there are lot of servers connected with the switch having multiples LAN cards. So mac table shows the mac of physical machine as well as virtual machines. But i want to know only the physical machines. Is there any other method to find out the IP address, hostname of the physical machines only?
Hello Leo Laohoo
Thanks for this information
In our network most of the Servers are not of Cisco. Some of them are Vmware machines, some are Hyper V machines, etc.
Does IP device tracking show us only the IP addresses of the Physical Machines of the Vmware Server not of Virtual Machines?
Regards
Mukesh Kumar
Network Engineer
Spooster IT Services -
Connect firewire audio interface and external monitor
I have just bought my MacBook Pro 13 and I will mainly use it for audio recording . I have connect my audio interface through the firewire port. I need to connect an external monitor . The only available ports are thunderbolt and USB . Can I connect a monitor with these available ports ?
Hi charisio,
Thanks for visiting Apple Support Communities.
If you would like to connect an external display to your MacBook Pro, you can use the Thunderbolt port. See these articles for some good information about Thunderbolt:
Thunderbolt ports and displays: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht5219
OS X Mountain Lion: About Thunderbolt
http://support.apple.com/kb/PH11407
All the best,
Jeremy
Maybe you are looking for
-
Sound dropouts while playing wav in timeline
Hi, since today there is aproblem with Audition 3 on a Lenovo T500 Laptop. It is used for sound recordings, done via an external USB soundcard (Virtual 7.1 USB Audio Adapter, StarTech). Everything was going fine untill today: When you now play a wav
-
Is there a way to combine the menu and navigation bars in Firefox 4?
I prefer having my tabs underneath like in the old version, but that leaves me with a long empty waste of space next to the navigation button. Is there a way to slot the url bar in here and so have the same uncluttered look as with tabs on top? It do
-
Is there a place we can download Oracle WebDB for Linux? Thanks in advance. Zhenhua null
-
Upgrade from 3.0 to 3.1 new user password reset error
hello, we upgraded from 3.0 to 3.1 last friday and have come across the following issue: New users being required to change their password for the first log in are receiving an error message: (Error: Item "P50_USER_NAME" was not displayed because the
-
We installed another server node on our portal. Since that time we have been getting a series of errors. We restarted the node but it did not help. In location com.sap.engine.core.service630.context.cluster.message.MessageListenerWrapper.process Me