SOAP message size limitation for sender soap adapter

Hi All,
We are facing critical production issue in case of sender SOAP Adapter,
If the sender soap message is having 114359 Bytes than the Third party is getting exception and SOAP request is not reaching XI.
If the message size is less then 100kbytes then no exception will come.
Is this a limitation that SOAP message size should not exceed 100kbyte?
Thnaks in advance
Best Regards,
Harleen Kaur Chadha

Hi ,
Thanks for your inputs,Could you please tell me which hardware configurations are you talking about?
Are you people talking about harware configurations for XI?
Best Regards,
Harleen Kaur Chadha

Similar Messages

  • Is There a size limitation for sending e-mail photos

    I am using the latest version of MS Entourage and my mail account is with .MAC
    Yesterday I highlighted two pictures in iphoto and clicked the e-mail icon but was then unable to send the mail. I got an error message. I deleted one of the phtos and still got the error.
    I then discovered the size dialog box and clicked "small" and was able to send one photo.
    I can receive mail with up to 20 attached Jpg items, But can't forward the same e-mail message. Is there a size limitation in Entourage or in .mac.
    Thanks

    There is no such limit with Entourage or Apple's Mail application but email account providers have an overall message size limit for received and sent messages.
    .Mac has an overall message size limit of 10 MB for received and sent messages which is a typical limit but I have a few friends and business associates who have a smaller overall message size limit of 5 MB. Although I can send a message that is up to 10 MB in size with my .Mac account, the message will not be accepted by the incoming mail server for the friends and business associates with a 5 MB message size limit.
    All files attached to a message must be encoded before being sent and decoded when received. Most email clients such as Entourage and Mail use MIME for attachment encoding/decoding which is the internet standard. A problem with MIME is it isn't very efficient. The encoding process increases the size of the pre-encoded file by roughly 50% of so. A file that is 5 MB in size (pre-encoded) will be roughly 7.5 MB in size due to the encoding process.
    What was the exact error message provided?

  • Failed in Message Mapping for Sender SOAP Adapter

    I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
    Any help is appreciated.
    Thanks in advance!
    Mrudula

    Hi,
    try to do a full cache refresh
    regards,
    Jakub

  • Alias for Sender SOAP Adapter URL

    When I create a web service for an o/b interface using the wizard, I need to give the URL of the pattern
    http://<host:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
    Looking at the URL, I think there is servlet that is processing the incoming SOAP messages based on the parameter (channel) and adding the SOAP Header for Sender Service, Sender Interface from that channel before sending it to IE.
    Is there anyway to create aliases for these URLs so that I can have distinct URL for each interface eg. http://<host:<port>/DeliveryConfirmation, http://<host:<port>/InvoiceCheck etc?
    I need to publish web services in custom-built UDDI tool which expects the URLs to be unique. (This uniqueness should not based on the parameter 'channel'). UDDI tool expects the part of the URL before '?' to be unique, which is not in my case. So, I'm thinking of aliases.
    Did anyone create Alias for sender SOAP adapter URL?
    I appreciate your inputs on this.
    thx
    praveen

    Stefan,
    Creating an alias like (http://<host:<port>/DeliveryConfirmation) for each web service makes the end Point URL (http://<host:<port>/DeliveryConfirmation?channel=<party>:<service>:<channel>) unique and my custom-built UDDI server would allow it.
    In this case, all the aliases would be for the same context path '/XISOAPAdapter/MessageServlet', right?
    I see the following on the help page.
    Prerequisites
    You must first have the J2EE Web applications deployed so that their aliases are added to the list of available application aliases. Then you can decide which one to remove from it.
    Do I need to deploy any J2EE Web Application here?
    I'm thinking that since 'XISOAPAdapter/MessageServlet' is already deployed, I just have to create a various aliases for it.
    I highly appreciate your inputs.
    thx
    praveen

  • HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

    Hi Experts,
    I need generate the service for sender soap communication channel for target url to receive the  inbound proxy.
    my scenario is like SOAP to proxy. while using  receiver proxy also we are planing using AAE method .
    i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
    how to generate the url for this and what is the transaction code .
    Please help us.
    Regards
    Ravinder.S

    Hi Ravinder,
    Q.my scenario is like SOAP to proxy. while using  receiver proxy also we are planing using AAE method.
    SOAP to Poxy in this case.
    For sender  SOAP system, we can generate the WSDL link in ID part.
    for Reveiver proxy give the integration engine URL.
    http://IP:PORT/sap/xi/engine?type=entry
    how to generate the url for this and what is the transaction code
    There is no transaction code for generating the URL.
    i hope this will help.
    Regards,
    Kesava.

  • Increasing Email Size Limits for some users

    Hi All,
    For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
    I used this procedure to do so,
    https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
    In a nutshell:
    Set Global Transport Org. Config to 200MB
    Set Transport Send and Receive connector to 200MB
    Created a Distribution group adding the MT members and me (for testing)
    Created a transport Rule for the 10MB limit for all users and exception for the distribution group
    (Believe me, i am not happy with the 200MB size limit)
    All seems to work but i have one issue that i cannot tackel or maybe it is by design.
    -Managemant can also send big files to all
    users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
    Is this by design or do i mis something?
    Thanks,
    Ron

    Hi RonGielgens,
    Attachment size in exchange has to be set on
    Global settings
    Connectors (send and receive connectors)
    Mailbox
    The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
    after you do this you will need either to set the 10MB on each mailbox
    Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
    Then change the limit on specific mailbox
    or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
    so basically create 2 transport rules
    1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
    2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
    Normal case it should not allow.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Required Changes in FCC Paramenters for Sender File Adapter.

    Hi
    I am Doing File-File Scenario.I am using FCC in the Sender File Adapter. I have defined the structure as below.
    My Source Structure
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_Source xmlns:ns0="http://city.net/filecopy">
       <Message>
          <Id>123</Id>
          <Head>
             <Id>123</Id>
             <Filename>test.xml</Filename>
          </Head>
          <Body>Helloworld</Body>
       </Message>
    </ns0:MT_Source_FILE>
    So for the above structure, I have defined the FCC Parameters as
    Document Name: MT_Source (Message Type)
    Document Namespace:http://city.net/filecopy(Namespace)
    Recordset Name: Message (root node)
    Recordset Structure: Message,1,Head,1
    Recordset Sequence: Ascending
    Recordsets per message:1
    Keyfield Type: string
    In the Table Rows I have defined
    Message.fieldFixedLengths: 3,10
    Message.fieldNames: Id, Body
    Message.fieldSeparator: ,
    Message.endSeparator: 'nl'
    Head.fieldFixedLengths: 3,8
    Head.fieldSeparator: ,
    Head.endSeparator: 'nl'
    Head.fieldNames: Id, Filename.
    My Input Text file
    123,Helloworld
    123,text.xml
    I am Getting Output as
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:MT_Source xmlns:ns="http://city.net/filecopy">
    - <Message>
    - <Message>
      <Id>123</Id>
      <Body>HelloWorld</Body>
      </Message>
    - <Head>
      <Id>123</Id>
      <Filename>test.xml</Filename>
      </Head>
      </Message>
      </ns:MT_Source>
    I should get Body field after Head Structure as in the Source Structure, So Please what changes do I need to do in the Parameters Specified above to get the desired Output.
    So How should I define the FCC Paramenters For Sender File Adapter ?
    Any Help Would be Appreciated.
    Regards,
    Varun

    Hi Everyone,
    I could Succeed to some extent.
    I have defined the parameters as follows
    Recordset Structure: Message,*,Head,1
    Key Field Name: KZ
    Key Field Type: integer
    In the table, I defined the Parameters as
    Message.fieldFixedLengths:1,3
    Message.fieldNames:KZ,Id
    Message.keyFieldValue:1
    Message.keyFieldInStructure:ignore
    Message.fieldSeparator:,
    Message.endSeparator:'nl'
    Head.fieldFixedLengths:1,3,8
    Head.fieldNames:KZ,Id,filename
    Head.keyFieldValue:2
    Head.keyFieldInStructure:ignore
    Head.fieldSeparator:,
    Head.endSeparator:'nl'
    Message.fieldFixedLengths:1,11
    Message.fieldNames:KZ,Body
    Message.keyFieldValue:3
    Message.keyFieldInStructure:ignore
    Message.fieldSeparator:,
    Message.endSeparator:'nl'
    My source text file
    1,123
    2,123,test.xml
    3,Hello World
    my output is
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:MT_Source xmlns:ns="http://city.net/FileCopy">
    - <Message>
    - <Message>
      <Id>123</Id>
      </Message>
    - <Head>
      <Id>123</Id>
      <Filename>test.xml</Filename>
      </Head>
      </Message>
      </ns:MT_Source>
    I got the output almost correct except I am not getting the value in the Body
    Any help would be appreciated.
    Please correct me If I am wrong.
    Regards,
    Varun
    Edited by: Varun on Sep 2, 2008 12:06 PM
    Edited by: Varun on Sep 2, 2008 12:15 PM

  • FCC Paramenters for Sender File Adapter

    hi
    I am using FCC in the Sender File Adapter. I have defined the structure as below. Fields ID, Filename, Values will be generated at Runtime as I have defined Used Defined Funtions for Both.
    Only I will Pass the value in Body. i.e "Hello".
    So How should I define the FCC Paramenters For Sender File Adapter ?
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
       <Message>
          <Id>123456</Id>
          <Head>
             <Id>123456</Id>
             <Filename>sample.xml</Filename>
          </Head>
          <Body>hello</Body>
       </Message>
    </ns0:MT_Source_FILE>
    In the source text file, Do I need to send only "Hello" value because ID and filename will be generated at runtime?
    Regards,
    Varun
    Edited by: Varun on Sep 1, 2008 6:00 PM

    Hi,
    Refer this link:
    http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    Regards,
    Nithiyanandam

  • Sys.aq$_jms_text_message type queues message size limitations

    Are there any size limitations for enqueing text messages into a sys.aq$_jms_text_message type queue using AQ?

    yes, i understand how to describe something...
    my question is how to get a list of properties.
    this data type has get functions that take the name of a property. now how do i know that property name to get it?

  • Activesync message size limits

    I am running Exchange 2007 and I understand that the default size limits for activesync is 10MB. I also understand that you can increase the message size limits. What I am trying to find ot is if there is a limit or ceiling for increasing the limit? If
    there is no limit what is best practice?

    Best practice is to leave them alone unless you have a compelling reason not to.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Please tell me if there is a size limitation for ResultSet

    Hi,
    I have a sql select * from....and the following code. If I limit the rows from the query results(rows 1 to 500), there is no problem. But if I get all the query results once , the ResultSet line get error message OutOfMemoryError. (I have large html infor. in the query result).
    So my question is if there is a size limitation for ResultSet? Do I have to break down the query results?
    PreparedStatement st = conn.prepareStatement(sql.toString());
    ResultSet rs = st.executeQuery();Thanks in advance,
    Katie

    Hi,
    Thanks for the link, but I didn't see any answers for
    my question.....my question is if there is a way that
    ResultSet hold all the query results?
    Thanks again,
    KatieDid you read this part:
    " Result Set Limitations and Downgrade Rules
    Some types of result sets are not feasible for certain kinds of queries. If you specify an unfeasible result set type or concurrency type for the query you execute, the JDBC driver follows a set of rules to determine the best feasible types to use instead.
    The actual result set type and concurrency type are determined when the statement is executed, with the driver issuing a SQLWarning on the statement object if the desired result set type or concurrency type is not feasible. The SQLWarning object will contain the reason why the requested type was not feasible. Check for warnings to verify whether you received the type of result set that you requested, or call the methods described in "Verifying Result Set Type and Concurrency Type".
    - There was a part after that that also talked about work arounds.

  • Dose Adobe Export PDF has size limitation for converting?

    Dose Adobe Export PDF has size limitation for converting?

    Hi,
    Please check the article mentioned below, let me know it it helps
    http://forums.adobe.com/docs/DOC-1515
    ~Pranav

  • Hardware FAQ's - 2. Is there any size limitation for video recording?

    2. Is there any size limitation for video recording?[/b]
    Yes. The maximum file size of continuous recording is 4GB (i.e. the device will stop recording after hour for HD+, 2 hours for HD, and 4 hours for VGA). This limitation is due to the file system of the built-in memory (i.e. FAT32 has a maximum file size of 4GB).Will and can this be fix with a firmware upgrade? I would like it to last atleast 2hrs for HD+? Which is it's limit with memory and or battery?

    I've been told that the method size problem occurs
    especially with JSPs. Again, splitting is the
    solution.Is that if the code is actually "in" the jsp? What I mean is, do you still get the problem if you use <jsp:useBean ... ? (so the code is seperated from the view, like it should be)

  • Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

    Hello All,
    We are currently building up a HTTPS message exchange with an external client.
    Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
    The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
    Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
    Now we have to configure the addtional Client Authentication.
    At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
    But what are the next steps to get this scenario successfully in place?
    Many thanks in advance!
    Jochen

    Hi Colleagues,
    following Steps still have to be done:
    - Mapping public key to technical user at Java Stack
      As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
    - Be sure CA root certivicate at Database under STRUSTSSO2
    - Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
    - use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
    Many thanks to all for support!
    Regards,
    Jochen

  • SEcurity settings for sender SOAP adapter

    Hey guys
    i m implemeting some security features in sender SOAP adapter by taking help frm www.help.sap.com,i have checked the message security box in sender Communication channel but in sender agreement i dont see any options for Decryt or Validate,i only see Keystore,Issuer and subject.
    i m on SP9 and XI 3.0
    where can i find these options of Decrypt etc?
    thanx
    ahmad

    Hi,
    Please see below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/BTS06CoreDocs/html/a3229d73-170d-42b7-bab9-12ae5f2d0fa7.asp
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/BTS06CoreDocs/html/f869bd82-df93-45e1-b747-b538820253fb.asp
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/121b053d-0401-0010-539f-f9295efb7bad
    Document security option in webservices
    And also check,
    Launch Visual administrator and navigate to Server->Services->Security Provider. In 'Policy Configurations' tab page, select the component 'sap.com/com.sap.aii.af.soapadapter*XISOAPAdapter'. Then click on the tab page 'Security Roles' and select 'xi_adapter_soap_message'. You will find the groups (equivalent to roles in PFCG) to which this security role (xi_adapter_soap_message) is assigned to. Make sure you assign the PFCG role listed here to the user.
    regards
    Chilla..

Maybe you are looking for