SOAP Payload Error in AE

Hi All,
We are facing a production issue for SOAP Receiver Comm channel.
In the Adapter Engine the messages are stuck in System Error state and only SOAP document is there in message content but no payload drop down is coming.
There are few successful messages also in between where the payload is also visible.
Also the same error payload when tested in Quality environment is visible in the Adapter engine.
Could you suggest what could be the reason?
Thanks,
Ankesh

Ankesh
I would always have a HTTP client to debug any kind of SOAP or HTTP adapter problems, you can exactly see what you are receiving.
If you are still experiencing same issue, please let me know, I can send you the HTTP server and HTTP client that I wrote in java.
Regards.

Similar Messages

  • No SOAP Envelope error in SOAP Receiver Adapter

    Hello Friends,
    Informaiton:-
    I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
    On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
    Outbound and Inbound service interfaces have Request/Response and Fault messages.
    Issue:-
    While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP  Envelope but 1 {}RESPONSES; HTTP 200 OK
    I also found that Request message is not reaching to the Java Web server.
    I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
    please suggest.
    Thanks & Regards
    Jagesh

    Hi,
    Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
    Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
    from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
    (1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
    (2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
    (3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
    One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
    HTTP Protocols in Point 1 (Through PI).
    POST  HTTP/1.0
    Accept: /
    Host: 172.24.138.142:4544
    User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
    CallingType: SA
    content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
    Content-Type: text/xml; charset=utf-8
    Content-Length: 1195
    SOAPACTION: "Action1"
    HTTP Protocols in Point 2 (Through Altova).
    POST / HTTP/1.1
    Content-Type: text/xml
    User-Agent: XML Spy
    SOAPAction: "Action1"
    Host: 172.24.138.142:4544
    Content-Length: 1195
    Connection: Keep-Alive
    Cache-Control: no-cache
    Thanks to Mr. Stefan Grube for writting such a nice blog.
    Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
    Experts, please suggest me further.
    Thansk & Regards
    Jagesh

  • SOAP Receiver error - HTTP 500 Internal Server Error

    Hi,
    We have a FILE to SOAP Asynchronous scenario to send data from our PI to customer PI.
    We are sending PGP encrypted file as the payload. So, foll settings have been maintained:
    Do not use SOAP envelope in Sender and Receiver SOAP
    nosoap=true in the URL.
    Message transform bean in the SOAP channels.
    File is successfully sent and received through SOAP protocol.
    But, both the SOAP Receiver and Sender channels are in error:
    SOAP Receiver error:
    SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error.
    As, this is a asynch scenario, we are not expecting the response.
    SOAP sender at customer PI is in error. Error text is not mentioned. It just displays: error occured.
    At both the ends, we do not have Repository objects as there is no mapping.
    Kindly help...
    Thanks,
    Pratibha.

    Hi All,
    For the same scenario, we need to Sign the data using the WebServices Security.
    (We are sending PGP encrypted data as SOAP payload using MTB, i have ticked "Do not use SOAP envelope")
    I have selected WebServicesSecurity as the security profile in the SOAP Receiver and selected "Sign" in the Receiver agreement, have provided our private cert.
    Tried sending a message. Communication channel audit Log shows the message:
    Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
    Success SOAP: request message entering the adapter with user J2EE_GUEST
    Success SOAP: Web Services Security processing...
    Success SOAP: Web Services Security processing skiped. Empty body...
    Success SOAP: completed the processing
    Please suggest how I can apply the WSS..
    Thanks,
    Pratibha.

  • SOAP Framework error while activating interactive form in SFP

    hi everyone,
    I am new to adobe forms, I got an error while activating interactive form
    SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
    I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
    Thanks in advance.
    - Aditya

    Its an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
    Raja

  • Capture the file name in the payload from the SOAP payload

    Hi ,
    We have a scenario , a file to RFC , we need the file name which is coming the SOAP payload . This file name needs to be captured in the payload . Please tell me is there  any way capture this .
    Thanks
    Anita

    Anita,
    If SP14 and above , do this,
    Sender File adapter --> Adapter Specific Identifiers -->  Select File name
    Then in your mapping, you can use this piece of code to access / get the file name,
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String FileName = conf.get(key);
    Regards,
    Bhavesh

  • SOAP Framework error: SOAP Runtime Exception: CSoa

    I got the error 'SOAP Framework error: SOAP Runtime Exception: CSoa' when I activate my Adobe Form. The form can be activated before but the error happens when I add the fourth main body page.
    Philip

    Hi  
    1. Check if your ADS is working. Use program FP_TEST_00 / FP_TEST_01 to test your ADS if it is working. 
    2. Test using super user, it might caused by authorization too.
    Thanks, Xiang Li

  • Error in SFP (SOAP Exceptional error)

    Hi,
    I have ECC 6 and Adobe livecycle designer 7.1 installed in my system. When Im trying to design
    layout in SFP (via. layout button) it is taking me to Adobe form designer(i have done
    with interface and print program step) however when im executing this (test run or print form) it is giving me "SOAP Exceptional error". Also, in SM59 ADS connection test is getting failed. Is there
    any seeting from netweaver side I have to do. Can anybody please let me know regarding this.
    Im an ABAPer and not sure about these settings and scenarios.
    Rgds
    Sudhanshu

    Hi,
    Ask any Basic person to look into the installation and if any other support packs need to be configured..
    This is not the work of an ABAPer. Get in touch with the BASIS person
    Regards
    Shiva

  • CS5.5 INSTALL FAILS. 'payload' errors? i don't understand

    don't understand what ANY of this means!  CS5.5 INSTALL FAILS have retarted and tried multiple times . HELP please!
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF006, DS013 ... WARNING: DS013, DW022 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 7 error(s), 47 warning(s)
    WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} with version (2011-03-17 01:56:17.451315) already installed with incompatible version (2012-03-05 05:30:16.288604)
    WARNING: DS013: Payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 is already installed and the session payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 is already installed and the session payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0 is already installed and the session payload {8B4C951B-F853-4B05-B892-9D5B3CD8AC98} PDF Settings CS5 10.0.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW016: NOTE: Cannot set action to the payload {9FE2BFB0-1DBE-4269-AEBA-A870C5990BEA} Adobe Dreamweaver Widget Browser 1.0.0.0 as it is already upgraded by the payload {85BD3EEB-DBBE-430A-A8F4-FE5D1E5AD606} Adobe Dreamweaver Widget Browser 1.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {9FE2BFB0-1DBE-4269-AEBA-A870C5990BEA} Adobe Dreamweaver Widget Browser 1.0.0.0 as it is already upgraded by the payload {85BD3EEB-DBBE-430A-A8F4-FE5D1E5AD606} Adobe Dreamweaver Widget Browser 1.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {A2502D10-2D75-4620-8A8B-73F39D5C1243} PDF Settings CS5 10.0.0.0 as it is already upgraded by the payload {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} PDF Settings CS5 10.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 as it is already upgraded by the payload {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    ----------- Payload: {DEA79551-23E3-430A-9B15-B544479B7DB2} Flash Player 10.2.153.1 -----------
    WARNING: DF009: Higher version plugin already exists at: /Library/Internet Plug-Ins/Flash Player.plugin(Seq 48)
    WARNING: DF010: Not installing plugin to: /Library/Internet Plug-Ins/Flash Player.plugin(Seq 48)
    ----------- Payload: {4B4C871D-9C8A-4C8A-B92A-C37273D6CE7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at /Volumes/CS5_5 Design Prm 1/Adobe CS5_5 Design Premium/payloads/AdobeFireworks11.1.0All/OEM(Seq 3960)
    ----------- Payload: {8AB04F7C-8AEF-4023-9CDB-F761E4ECF9CC} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at /Volumes/CS5_5 Design Prm 1/Adobe CS5_5 Design Premium/payloads/AdobeFireworks11.1.0en_USLanguagePack/OEM(Seq 86)
    ----------- Payload: {08EF22BC-43B2-4B4E-BA12-52B18F418F38} Adobe Photoshop CS5.1 Core 12.1.0.0 -----------
    ERROR: DF006: The path "/Library/ScriptingAdditions/Adobe Unit Types.osax" already exists and is not a directory, Please rename or delete and retry(Seq 2751)
    ERROR: DF016: Unable to create directory "/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents" with mode 775(Seq 2751)
    ERROR: DF006: The path "/Library/ScriptingAdditions/Adobe Unit Types.osax" already exists and is not a directory, cannot create path "/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents",Please rename/delete "/Library/ScriptingAdditions/Adobe Unit Types.osax" and retry(Seq 2751)
    ERROR: DW063: Command ARKCreateDirectoryCommand failed.(Seq 2751)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS5.1 English Language Pack_AdobePhotoshop12-en_US: Install failed

    Lizhale the errors you have posted indicate that your file permissions have become compromised.   In specific it would appear that your User account is failing to modify the /Library/ScriptingAdditions directory.  Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your compromised file permissions.

  • Issue after Migration: ID and Content-ID are different in SOAP Payload

    Hi Experts,
    I am facing a strange issue in the PI landscape after the migration from XI 3.0 to PI 7.1.
    The scenario is from R/3 system to TIBCO System (Proxy-to-SOAP). The TIBCO system receives the file in SOAP Format. The message is sent from PI via SOAP adapter to TIBCO System.
    There is a attachment coming from the R/3 System along with the main message and the main payload/message has a "attachment-ID" as a field. Earlier what used to happen in XI 3.0 that the "Attachment-ID" used to equal to the "Content-ID" when the SOAP payload was generated at the TIBCO end. Now after migration, in PI 7.1 the "Attachment-ID" and "Content-ID" are different. We have control over the "Attachment-ID" as it is coming from the source payload but we do not have any control over the "Content-ID" as we are not creating it.
    Can anyone of you please let me know how the SOAP Payload is created and how the content-ID gets populated in the Header of the SOAP Envelope? Also, can anyone help me to fix this issue? Is it something which needs to be handled by us or the BASIS Team?
    Thanks,
    Arkesh
    Edited by: Arkesh Sharma on Dec 16, 2011 12:53 PM

    Hi Ramesh,
    Thank You for the very Helpful Answer. Before I proceed and close this thread, I have one more question which comes to my mind:
    I create my own SOAP Header if I apply the solution provided by you then will the rest of the details in the SOAP Header payload will change or do I need to customize it for myself? For e.g., there is a field named MessageId in the SOAP Header. If I write a Java Mapping, do I need to manually populate the MessageId field in the SOAP Header of my java code or will it be automatically populated?
    My requirement is to change only the content ID of the SOAP Header Payload and the rest of the fields should remain the same as it is. Is it possible with the approach that you mentioned above?
    Thanks,
    Arkesh

  • SOAP Invoke error: Status (500): Internal Server Error

    I have a BLS with a WebService action.  I am testing the WebService call with each operation within the wsdl address.  I used the wsdl address to make the call.  I selected the only port available.  There are several operations available.  This WebService call is successful for all operations except for one.  The operation that fails, I get the following errors in the "ServletExec.log" for this one operation.  Can you tell me where the issue may be?
    "SOAP Invoke error: Status (500): Internal Server Error"
    "java.lang.Exception: Status (500): Internal Server Error"
    "at com.lighthammer.webservice.SoapClient.invoke(Unknown Source)"
    "at com.lighthammer.xacute.actions.webservice.WebServiceAction.RawInvoke(Unknown Source)"
    "at com.lighthammer.xacute.actions.webservice.WebServiceAction.Invoke(Unknown Source)"
    Thanks,
    Chris

    The Web Service had been "Reversed Engineered".  In doing this, the parameters had been changed in the Web Service.  This created a "break" on MII's side (i.e. MII was still trying to pass the authentication token to the parameter named "authenticationToken", instead of passing it to the parameter named "paramString1".).
    Thanks,
    Chris

  • Web Service error: javax.xml.soap.SOAPException: Error parsing envelope:

    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
    dbws-callout-utility 10.1.3.1
    JPublisher 10g Release 10.2
    Generating command:
    ./jpub -u reklaam/pswd -proxywsdl=http://auster.mbp.ee:8082/Service.asmx?WSDL -endpoint=http://auster.mbp.ee:8082/Service.asmx -dir=tmp -plsqlpackage=adserver -omit_schema_names -proxyopts=jaxrpc,noload
    loading:
    loadjava -u reklaam/pswd -r -v -f -genmissing plsql_proxy.jar
    executing script files and granting
    dbms_java.grant_permission('REKLAAM', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
    dbms_java.grant_permission('REKLAAM', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
    dbms_java.grant_permission('REKLAAM', 'SYS:java.net.SocketPermission', '*', 'connect,resolve' );
    dbms_java.grant_permission('REKLAAM', 'SYS:java.util.PropertyPermission', '*', 'read,write' );
    dbms_java.grant_permission( 'REKLAAM', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
    Now when I execute ws procedure I got exception:
    ORA-29532: Java call terminated by uncaught Java exception: java.rmi.RemoteException: java.rmi.RemoteException:Error parsing envelope: most likely due to an invalid SOAP message.; nested exception is:
    javax.xml.soap.SOAPException: Error parsing envelope: most likely due to an invalid SOAP message.
    ORA-06512: at "REKLAAM.ADSERVER", line 29
    ORA-06512: at line 13
    udump trace file:
    java.rmi.RemoteException: java.rmi.RemoteException:Error parsing envelope: most likely due to an invalid SOAP message.; nested exception is:
    javax.xml.soap.SOAPException: Error parsing envelope: most likely due to an invalid SOAP message.
    at genproxy.runtime.ServiceSoap12_Stub.createClientFromObject(genproxy.runtime.ServiceSoap12_Stub:270)
    at genproxy.ServiceSoap12Client.createClientFromObject(ServiceSoap12Client.java:40)
    at genproxy.ServiceSoap12ClientJPub.createClientFromObject(ServiceSoap12ClientJPub.java:144)
    What's wrong?

    I have exactly the same issue, do anyone have some good suggestions ?

  • ERROR: DW050: The following payload errors were found during install:  ERROR: DW050:  - Adobe Muse:

    Having no luck installing anything. Even reinstalled Windows 7 Ultimate.
    Starting out with Muse since it seems to be a small file size. No luck...anyone have any ideas?
    This is what I get:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Muse: Install failed
    -Jason

    Sounds like it's a fairly common error across the suite - try this:
    http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html

  • Payload Errors - Mac; unable to load Premiere 10

    Went thru the 'self help' to boot in safe mode, uninstall/reinstall Adobe Air, and NOTHING WORKED. Here is the exit code 7 information. Just purchased and am trying to load via DVD. Loaded Photoshop Elements off the same disc and it is OK. Need Premiere to work.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 8 error(s), 7 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPacken_US: Install failed
    ERROR: DW050:  - Smartsound2: Install failed

    Hi Karan,
    You query can be answered in 2 parts.
    1) Error in the installation log - This should appear before applying the fix. After applying the fix(using dmg) or changing the system date, this log should not come. In case it still does, please let us know.
    2) EO Issue -  This issue is unrelated to the installation problem(including Language pack failures) and its fix. Restarting the machine should this issue. Please let us know if it still persists.  As per our observation, It appears only on a small fraction of machines.
    Just to reiterate these 2 issues are separate and installer fix has nothing to do with the EO issue. For the EO just try restarting your machine and things should work fine.
    Thanks,
    Aditya

  • Soap log error

    Does anybody know what causes this SOAP log error?
    "Service invocation exception: HIERARCHY_REQUEST_ERR: An attempt was made to insert a node where it is not permitted. "

    I use datastage Web Service Transformer stage to send Account data to OnDemand. I got Soaplog error "Service invocation exception: HIERARCHY_REQUEST_ERR: An attempt was made to insert a node where it is not permitted." even I sent the valid data. I don't know what that means. Pls. help me to resolve this issue asap.

  • SOAP Framework Error: soap runtime exception: Csoapexceptiontransport

    HI,
        I am trying to execute my adobe applications in Webdynpro abap. When trying to acvtivate, the following exception raising.
    SOAP Framework Error: soap runtime exception: Csoapexceptiontransport: http send failed with exception communication_failure(100.101)
    Wat would be the problem here?
    Thanks,
    Gopi.

    Check the follwoing program in SE38 Pgm FP_PDF_TEST_00 if you will get the same error then you have to check with your BASIS team to configure ADS connection parameter in Visual Admin
    Kanagaraja L

Maybe you are looking for

  • Amount of mail messages slowing the app down?

    My mail app seems to be taking longer than before to fetch messages and I was wondering if it had anything to do with the amount of mail messages in my various mailboxes. Can someone tell me, should I be clearing out old mail messages or is it safe t

  • What does a adobe acrobat plugin does while displaying PDF file in IE?

    I want the PDF file's data when it a PDF is opened in IE. How can I do this using c#. The  COM reference AcroIEHelper.dll is added in  my project. ACROIEHELPERLib.AcroIEHlprObjClass acroIEHlpr = new ACROIEHELPERLib.AcroIEHlprObjClass(); acroIEHlpr  i

  • How to find out How many rows and coloumn exists in the Excel sheet

    hai gurus,              present iam uploading data from presentation server to application server.  when i use gui_upload the data is coming non-readable format. so i used alsm_excel_to_int fm for that . but the problem is user can give any type of e

  • Canvas with swing

    Hi, I would like to drag and drop components to a Canvas. Shall I use Canvas with the Swing components? Sometime back, I do remember reading an article saying not to mix swing components and awt components. Is the Canvas an exceptional case? Any sugg

  • Clustered WebLogic MDB receiving multiple messages...

    Hi all, I have a JMS WebLogic clustering problem. First, let me describe the problem.  The MDB of my application (it's a simple test application to get the clustering kinks worked out) is listening to a Topic and when I publish a message to the Topic