Soap synchronous

Hello Experts,
Here is my scenario.
Proxy sender -> PI <-> SOAP receiver.
Web service sends the response back to PI, but CRM doesnt want that response.
Web wants PI to store this message so in future if there will be some problem then they can go and check for that problem.
How should i do that?
Shoud it be 2 asynchronouse scenarios like below:
Proxy -> PI -> Soap
Soap -> PI -> File
Or should i use BPM or any other suggestions.
so please reply as soon as possible.
Thanks,
Hetal Shah

Hi,
Web wants PI to store this message so in future if there will be some problem then they can go and check for that problem.
You can't store messages in PI for long. It's not advisable to have for more than 2 weeks. Also depends on the hardware.
Shoud it be 2 asynchronouse scenarios like below:
Proxy -> PI -> Soap
Soap -> PI -> File
Using file will be a good idea, but you should check if the response is any way dependent on the request or you need some kind of correlation for that. If not, then it will be real simple ...
Regards,
Neetesh

Similar Messages

FILE TO SOAP SYNCHRONOUS IN PI 7.4

Hi Experts
FILE TO SOAP SYNCHRONOUS IN PI 7.4
Can you tell me any one step by step procedure?
Regards
Sagar

Hi Sagar,
have a look at this links. They should give you some hints:
http://scn.sap.com/thread/1881846
XI/PI: A Guide to Using SAP XI SOAP Adapter
http://www.****************/Tutorials/XI/WebService2WS/Index.htm
Please let me know if they helped you.
Regards
Christian

Error in Proxy to SOAP synchronous scenario

Hi Gurus,
Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
When I am trying to post the request message from XI, I am getting the following error.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
Please provide an answer as soon as possible.
regards
Debansu

Hi,
i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
do the below steps for investigating the issue
1)try pinging the URL provided in the WSDL from internet explorer.
2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
Thank You,
Madhav

IDoc to soap synchronous scenario with BPM

Hi,
I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
Thanks & Regards,
Pragathi.

The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
time.
Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
An exception might have occured because the description would be something unacceptable by the target application.
and different type of exceptions and solutions for the same
there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
Regards,
Abhishek.

IDOC to SOAP synchronous scenario

Hi All,
We have an IDOC to SOAP synchronous scenario in which IDOCs are sent to SOAP by calling a service and then SOAP sends a response back to XI . The response is not sent to SAP- R3. Please suggest on this
Thanks

Hello Rajesh,
Thanks for your good justification.
Here I have also replicated same kind of scenario and having same kind of issue.
One thing just wanted to confirm - Even though SOAP adapter expects HTTP 200 response back from webservice, still SOAP channel is getting into red with following , and as we have Alert configured ...Alert mail also receiving as part of Error only. So How can we avoid that response ? Is there have any parameter to handle or suppress the response back?
Thanks!
Goutam

File to soap synchronous senario

Hi Experts
File to soap synchronous senario ?
Can you tell me step by step procedure
Regards
Sagar

Hi Sagar,
Use request response module bean at File adapter to achieve synchronous communication.
Please check below links for detailed information
Using Request Response Bean Module in FILE Adapter - Process Integration - SCN Wiki
File-RFC-File(Without BPM) - Process Integration - SCN Wiki
Adding RequestResponseBean in the Module Processor - Adding Modules to the Module Processor - SAP Library
Sync/Async scenarios without BPM
Regards,
Krupa

File-to-soap synchronous

Hi
I have a scenario where i have to create the file-soap synchronous
how we achieve that
1. Do i have to create the outbound message syn for file
venkat

Hi JV
We can do that without using the BPM if we have SP 19 for XI 3.0 or SP 10 for PI 7.. By using the Modules.
File - RFC - File without a BPM - Possible from SP 19.
venkat
Edited by: venkatesh sedamkar on Dec 31, 2007 9:13 PM

File to SOAP (Synchronous) with certificates Encryption and Descryption

Hi,
Can anybody advice me how can I develop the scenario file to SOAP (Synchronous Process) with certificates encryption and descryption.
Thanks,
Naidu.

For file to soap sync scenario without using BPM, you need to use the following adapter modules.
http://help.sap.com/saphelp_nw04/helpdata/en/45/20c210c20a0732e10000000a155369/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/20cc5dc2180733e10000000a155369/content.htm
For applying certificates, you need to configure SSL on java stack.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/197e6aec-0701-0010-4cbe-ad5ff6703c16
Regards,
Prateek

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

IDOC to SOAP Synchronous Communication

Hi Experts,
Scenario is IDOC to SOAP.
And Expecting Response(Sucess/Failure) from Third Party system.
My understading is IDOC wont support Synchronous communication.
If synchronous comm is possible in IDOC to SOAP scenario could you please elobrate the Requirements and detail the procedures with ID and IR configuration.
If not How this can achived in this scenario.
Regards,
Seshu.

[IDoc to SOAP Synchronous with BPM|http://wiki.sdn.sap.com/wiki/display/XI/IDoctoSOAPSynchronouswith+BPM]
Regards
Raj

SOAP synchronous receiver dynamic confiuration

Hi.
I have a problem with a synchronous receiver SOAP.
I have a SOAP to SOAP synchronous flow, with some java modules, one java module before the SOAP receiver and one after.
The flow look like this:
SOAP sender -
> SOAP request java module -
> SOAP receiver -
>SOAP respone module.
The problem is that I set some dynamic configuration in the soap request java module but I can't retrieve them in the soap response module.... the soap receiver has erase them.
Is there any way to keep dynamic configuration in a SOAP synchronous receiver??
Thanks.
Marty Johann

Dude,
the dynamic configurations refer to one message, in the sense they are stored in the message's header.
But if you send that message and receive a response from it, that's a whole different message (they have different Message IDs), you see? It is not to be expected to find the same dynamic configurations in the response message, since it is a whole different message, with an independent header area.
That being said, I do have some scenarios where the dynamic configurations are persisted in soap sync messages. Why is that? I have no clue...
Regards,
Henrique.

Error in HTTP - SOAP synchronous senario.

Hi All,
I am working on a HTTP -> SOAP synchronous scenario. I am using the wftetch tool to send HTTP request. I am getting the following error in the Wfetch tool when I try to execute the same:
URL-Parameter service (sender service) in URL is missing
And in SXMB_MONI I get following error:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</SAP:AdditionalText>
Please provide inputs to correct the error.
Many thanks,,
Neha

Hi Neha,
pls do chk the link that u have used to connect the SOAP and chk in the Wfetch tool
for the address
do chk this links
/message/266750#266750 [original link is broken]
Some handy HTTP tools
Thanx
Sampath

SOAP Synchronous messages

Hi experts,
I am testing SOAP synchronous messages. this is sender is SOAP receiver is ABAP proxy.
while testing if the message is successfully processed, i am not able to see the message details in SXMB_MONI.
but if any errors are processed i am able to see the error message.
Here my question is for synchronous interface can we see the sucessfull messages in SXMB_MONI.
thanks
Srinvas

HI Srinvas,
-->Recheck your entire scenarios once again if the process flow involves the Integration Engine definately the messages should be visible in the SXMB_MONI.
-->So you are inserting the Record into db table using the ABAP server proxy.......
-->I think there may not be any problems in the configuration of INtegration Engine, SXMB_ADM since you can view the error messages.
Thanks

FILE to SOAP synchronous scenario - config of SOAP channel

Hi All,
I have a scenario where I want PI to pull some files from 3rd party application.
Adapters to be used: SOAP receiver, FILE adapters.
I am aware of the use of Request/Response beans in File sender channel and the File receiver channel to dump the received files in a particular location.
I need help with the configuration of the SOAP channel.
The files to be pulled will be Encrypted.
Summary:
File sender(RequestResponse & ResponseOneWay Beans) , File receiver( to receive the files), SOAP receiver.
Need help with the config of SOAP.
Kindly let me know your views.
Thanks,
Pratibha.

Hi,
Let me put it in detail steps:
In forward flow we will be sending an IDoc. It will be processed and later an Acknowledgement file will be generated.
Now, we want to PULL this Ack file. If the other party had to push the Ack file, the scenario would have been simple.
But, we want to poll for this file and then pull it.
So, we would have something like this:
1. FILE SENDER sends a sample file.
2. We will be applying the beans in file sender to make it a synchronous scenario. So, the Ack file will be received at the location mentioned in the corresponding FILE RECEIVER adapter.
3. We have a SOAP RECEIVER which should send the ACK file in response.
I have configured the same scenario where the RECEIVER was HTTP adapter. The 3rd party had provided us the URL and ENT-APRF value. When I used to send the sample file via FILE SENDER to this HTTP receiver, I was able to retrieve the ACK file via the FILE RECEIVER.
Now, I wish to configure the same using RECEIVER SOAP adapter.
I need to know about the config at SOAP end i.e. how and where the ACK file will be available at the SOAP end for the FILE sender to pull the file.
Ack files will be encrypted..
Any views/suggestions will be of great help.
Thanks,
Pratibha.

File to Soap synchronous Scenario

Hi Experts,
I have designed an synchronous File to SOAP scenario in PI 7.31. I am able to send the request am getting the response to target path also correctly but am not able to see the msg in SXMB_MONI.am not using ICO am using dual stack in PI 7.31 plz help on this.
Regards,
Rajendar K

Hi Rajendar, what does your configuration look like? (e.g. Service Interfaces, Oparation Mapping)
I'm trying to do the same but SOAP response message is not getting back into IE. I have LOGGING_SYNC already set to 1.
Thanks, Aaron

RFC to SOAP Synchronous

Hi all,
Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC. Please explain in detail.
would appreciate your helpful information
Thanks

Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC.
So you mean to say the RFC that you include in the Request of message interface is RFC1 and that in the Response of the same MI is RFC2?
If the sending Business System (SAP) is the same then this should be like any other RFC to SOAP sync scenario.
You may need to mappings RFC1_to_SOAPReq and SOAPResp_to_RFC2
Develop the MI accordingly with the corresponding Messages included and then include the appropriate mappings in Interface Mapping.
Regards,
Abhishek.

Soap synchronous

Similar Messages

Maybe you are looking for