Soap to rfc..dont get a response...

I have pasted below the complete steps for doing a rfc to soap synchronous scenario...i can send a message and update a custom table in r/3 with the data..however i am not getting any response, i have tested the rfc on r/3 and checked the table ..which is getting updated correctly....any ideas on whats wrong .....More important areas are the items in bold.....which is where i think smthing is not ok.
Design..part........
Create data types
1) testScore_dt
2) testScoreResponse_dt.
Create 2 msg types for 1 and 2...
testScore_MT
testScoreResponse_MT
Create Message Interface
MI_TestScore
Outbound Message Interface Synchronous
input Message is testScore_MT
outputMessage is testScoreResponse_MT
Import rfc
ZRfc_testScore
ZRfc_testScoreResponse
Create 2 message mappings
MM_Input_001
Source is testScore_MT
Destination is ZRfc_testScore
MM_Output_001
Source is ZRfc_testScoreResponse
Destinatio is testScoreResponse_MT
Create 1 Interface mapping
Source is MI_testSource
Target is ZRfc_testScore
Request tab...choose mapping as MM_Input_001
Response tab ...choose mapping as MM_Output_001
Configuration...
Create Sender_BService
Create Reciever_BService
Create Communication channels
CC_Sender_Soap
default namespace
interface = MI_TestScore
CC_Reciever_RFC
Do Reciever determination
Sender = Sender_BService
Interface == ?
Do Interface determination
Need Help ?
Sender Agreement
Sender CC
Reciever Agreement
Reciever CC
Regards
Ravi Raman

Ravi,
I believe your scenario is SOAP to RFC, coz the title and your explanation misleading to different scenarios.
>>>>>>>Do Reciever determination
Sender = Sender_BService
Interface == ?
Do Interface determination
Need Help ?
Receiver Determinatio
Sender = Sender_BService
Interface =MI_TestScore
Configured receivers = Receiver_BService
Interface Determinatio
Sender = Sender_BService
Outbound Interface =MI_TestScore
Inbound Interface = RFC
Mapping = Interface mapping.
raj.

Similar Messages

It is possible to get a response of a asynchronous RFC call thru wait loop

Hi Experts,
The requirement is that i queue up all the requests from a web services ( One queue per plant for example) which i set in the HTTP sender URL ( i mean the queue name ). and i am posting the records thru a RFC call.
1. Let the RFC call be synchronous and in case the R/3 system is done.. Will the XI queue keep the Call and keep on retrying it till the R/3 system is up.
2. Otherwise if the RFC call be asynchronous, is it possible to introduce a wait loop in BPM to listen to the RFC till i get some response ( i think this is not possible).
Need your suggestion on the same...
The requirement demands that no single request from the web service should be lost.. in case of failure of R/3 they should be queued up and re tried.. Forget about the error because of exception in RFC this will be taken care manually..
Thanks for your response in advance.

Hi Rajesh,
you can queue and restart only asynchronous messages. I think you can build a Business Process, where you repeat sending a message til you have success or maximum number of tries is reached. But no good idea, coz you will get timeout at HTTP sender. Aynchronous messages dont have a response.
May be, XI can solve your task in the standard: In transaction SMQR you can just configure what you describe. All asynchronous messages will be queued and restartet in case of receiver not reachable. You can configure no of retries and intervall between.
Regards,
Udo

RFC - XI - WebService :: Not getting complete Response from WS

Hi
I am working on a following Synchronous scenario
SAP R/3 --> Sender RFC Adapter --> XI --> Rec. SOAP Adapter --> MI Web Service
Now I tested the structure of Request/Response Message from WebService in XML Spy, & designed my Request/Response Message structure in XI based on that.
Now when I am sending the request from XML Spy,the Response message which is coming is this -->
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <soapenv:Body>
 <ns1:getResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://www.MI/util">
 <getReturn href="#id0"/>
 </ns1:getResponse>
 <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:AddressDTO" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://to.MIutil.com">
 <latitude href="#id1"/>
 <longitude href="#id2"/>
 <postcode xsi:type="soapenc:string">111</postcode>
 <state xsi:type="soapenc:string">XYZ</state>
 <streetName xsi:type="soapenc:string">NYDEL</streetName>
 <streetNumber xsi:type="soapenc:string">444</streetNumber>
 <streetType xsi:type="soapenc:string">ST</streetType>
 <suburb xsi:type="soapenc:string">SQY</suburb>
 </multiRef>
 <multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">-33.87571285585008</multiRef>
 <multiRef id="id2" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">51.20783220341076</multiRef>
 </soapenv:Body>
</soapenv:Envelope>
{ Pls. take note that it is referring variables}
But when I am sending the Request from SAP R/3 using SAP XI, I am getting the Response message from WebService like this -->
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ns1:getResponse xmlns:ns1="http://www.MI/util" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<getReturn href="#id0" />
</ns1:getResponse>
which suggest that operation is getting called successfully & response is coming back.
Can you tell me what is the reason that why I am not getting the rest of the response .
Regards
- Lalit Chaudhary -

Hi,
Yes it can be possible, you have to maintain SOAP Header.
please see the below links..
How to extract XI-header fields from XI-message in JAVA?
/people/sap.user72/blog/2005/12/11/how-to-apply-themes-in-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=href%20%20in%20xi&cat=sdn_all
Regards
Chilla..

SOAP- XI- RFC , while posting soap request thru SPY , getting exception,

Hello friends,
I am trying SOAP->XI->RFC scenario. would like to explain in brief about requirement then let me know if this is correct approach
Our client wants a pull approach from R/3 , for example lets say he wants to get Material Master data from R/3.
So he will send a SOAP request with the material number and r/3 should return back the details.
So we have decided to go with SOAP->XI->RFC approach
That means a sender SOAP Adapter and a receiver RFC adapter,
I have done all the designing, like creating my own DataType,MessagType all interfaces etc.
then i created a Bussiness system of type third party with host name as XI host name to use for sender, and a business system of type Web As ABAP and used one of the R/3 as receiver system.
Doubts: Once i created Soap channel in my sender businees system(where Interface name i gave my Message Interface name and its Namespace), and the receiver channel in my another bussiness system, i created the entire scenario using Configuration Wizard.
NOW THE PROBLEM STARTS.
After clicking Define Web Service , it asks for URL
i gave following url
http://ps3181:50000/XISOAPAdapter/MessageServlet?channel=TPBS_Rohit:soapChannel
TPBS_Rohit is my Sender (third party bussiness system name), and soapChannel is the channel under it.
tell me if this is right
Then in the Message Interface i selected my Message Interface name that i had created in Design for publishing.
MAJOR DOUBT
It Asks for
Service :
Interface Name :
Interface NameSpace :
what do i give here.
this is what i have given
Service : TPBS_Rohit, Sender (third party bussiness system name)
Interface Name : MI_SOAP <again the same message interface name that i have published earlier>
Interface NameSpace : same namespace.
AM i right ???
I am sure somthing is wrong since when i tried sending a SOAP request using XML SPY , this is what i get.
[code]<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>Exception</code>
 <text><![CDATA[
java.lang.Exception: invalid channel (party:service:channel) = TPBS_Rohit:soapChannel
 at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:498)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
 ]]></text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>[/code]
Please Let me know where have i gone wrong ?

hi manikandan,friends
i changed the url to http://ps3181:50000/XISOAPAdapter/MessageServlet?channel=:TPBS_Rohit:soapChannel
colon included.
but now i get the following error trace in SPY ..
[code]<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>failed to call the adapter engine</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>DeliveryException</code>
 <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:697)
 at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
 at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:221)
 at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
 at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:543)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
 at com.sap.aii.af.mp.soap.ejb.AFCallerApplication.perform(AFCallerApplication.java:122)
 at com.sap.aii.messaging.srt.ApplicationBubble.onMessage(ApplicationBubble.java:29)
 at com.sap.aii.messaging.srt.ExtensionBubble.onMessage(ExtensionBubble.java:56)
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:576)
 ... 20 more
Caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:366)
 at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:123)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:419)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
 ]]></text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>[/code]

*Soap TO RFC :-Empty SOAP RESPONSE*

Dear Friends,
 I am doing a SOAP TO RFC scenario.And while testing the scenario using SOAP UI TOOL the response is EMPTY its like this.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header/>
 <SOAP:Body/>
</SOAP:Envelope>
Monitoring:-
In message monitoring :- its successful
In SXMB_MONI :-Its a checked Flag.
My Mapping is working fine.
Please help me in Tracing the Problem.
Regards,
jeevan

Hi Jeevan,
Did you check the payload in mapping editor? also check the mappings once more and check the thread
In RFc Response no data is coming
Thanks!

SOAP to RFC - Sync Scenario. How to find where the response is going to?

Hello All
I have a SOAP to RFC sync scenario.
In SXMB_MONI, i see that both the initial message and the response message are successfully processed.
But, the SOAP sender is not receiving the response message.
How can i trouble shoot this scenario? How can i findout what is going wrong?
Most importantly, How can i find out the web address of the SOAP sender? I do not see it anywhere.
Thanks

Hi Chandra,
Please check this blog.
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
You can by pass your message through a TCPIP gateway , this will help you to see the message contnet and the SOAP header information.
TCPIPGW application is availabel in one of the SAP notes for Monitoring SOAP adapter. and 2 SAP SDN PI blogs are also there on how to use this application...
Regards
Sunil.

RFC to JDBC Sync Scenario and get JDBC response

Hi All,
We need to create RFC to JDBC synchronous interface with update_insert action.
And we need to get the number of records updated or inserted as response and map the response and send it back to ECC as RFC response mesg.
I have gone through the help document on JDBC and it says :
The response document has the following format; one of the two values is always 0 because either an UPDATE or an INSERT action is always executed:
<update_count>count</update_count>
<insert_count>count</insert_count>
Now following is the question: Is this this the standard feature? Because in our case Database side they will not be sending any response back.
So with the synchronous receiver JDBC channel would we get this update and insert count as response by default?.
Please help with replies.
Thanks,
Jane

Hi Jane
No setting needs to be done by the Database team, it is a standard feature.
Whenever you insert or update records in DB using the JDBC Adapter, you will get the response with the count.
If insertion fails due to some reason in JDBC Adapter, then there will be no response.
Regards
Osman

Why getting "DeliveryExcetion" in SOAP- XI- RFC scenario?

Hi,
This is the scenario :
i) I made a Integration Scenario for updating a Network in Project System(SAP-CE8) from my Web application in SOAP->XI->RFC context. I was able to update it using transaction SE37 on SAP R/3. But when i wanted to update it through XI using web service approach. The Web service returned "DeliveryException" message. Caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE. Upon looking into Runtime Workbench in XI ... i found that a call was made across XI in Message Monitoring with "System Failure".
ii) To correct this situation, I reconfigured my XI scenario by deleting the previous sender channel(SOAP) and recreating a new channel(SOAP) and redefined the webservice. This time the problem got worse as I got "ModuleUnknownException" and no entry in message monitoring. However when i tried with the old channel i still got the "DeliveryException" message.
My Queries are following :
a) What are the causes of "DeliveryException".
b) When is the web service created ... after just defining the web service in configuration builder ... or after some time ?
c) Why could it be possible to access the web service using old communication channel path while it was already deleted and change list activated ...
d) What is the possible causes of Module Exception...

Hi Ranjan,
Thanks for reply.
1) You get the System Failure message when the message coming into the Integration server is not valid and if it can't interpret properly.
Check the message you are receiving from the Web Services and your message interface and make sure they are the same or at least correct.
Does it mean that return message from web service is not mapped properly? I have checked all the message mappings are correct in my scenario. What may be the possible causes of "DeliveryException".? Can you please specify any particular thing to be taken care of while doing Message Mapping?
3) Check your Cache, if the changes has actually been activated. Cache may not have been updated hence the old objects still exists.
I had activated the changes and cleared the cache after deleting the communication channel. But still I was able to use that old communication channel.
Regards,
Vikas Khandpur

SOAP to rfc XMLSPY not conneting with PI 7.1 server

hiii gurus,
I am trying soap to rfc scenario. i have completed all the steps.. generated the webservice . now i am testing from XMLSPY
when im sending the soap request to sender i m getting the following error.
"<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA["
"com.sap.aii.af.lib.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $)
The Channel has been configured correctly.. i dont know what is the problem... In some conversion i saw something like the userid which im giving should have the role as SAP_XI_APPL_SERV_USER. when i checked it not assigned .. so i assigned manually. but still the same problem exits..
please help me experts.
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Sep 2, 2009 5:20 PM
Edited by: Balaji Pichaimuthu on Sep 2, 2009 5:21 PM

<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions name="aryan_soap_rfc_mi" targetNamespace="http://aryansoap2rfc" xmlns:p1="http://aryansoap2rfc" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:documentation />
- <wsdl:types>
- <xsd:schema targetNamespace="http://aryansoap2rfc" xmlns="http://aryansoap2rfc" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="aryan_req_soap_mt" type="file_req_soap_dt" />
<xsd:element name="aryan_soap_rfc_mt" type="file_res_soap_rfc_dt" />
- <xsd:complexType name="file_req_soap_dt">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/VersionID">5bf85d84978d11deab10001422b066ca</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
<xsd:element name="company_code" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="file_res_soap_rfc_dt">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/VersionID">811a2213978d11dec05a001422b066ca</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
<xsd:element name="company_code" type="xsd:string" />
<xsd:element name="company_name" type="xsd:string" />
<xsd:element name="city" type="xsd:string" />
<xsd:element name="Country" type="xsd:string" />
<xsd:element name="Language" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="aryan_req_soap_mt">
<wsdl:documentation />
<wsdl:part name="aryan_req_soap_mt" element="p1:aryan_req_soap_mt" />
</wsdl:message>
- <wsdl:message name="aryan_soap_rfc_mt">
<wsdl:documentation />
<wsdl:part name="aryan_soap_rfc_mt" element="p1:aryan_soap_rfc_mt" />
</wsdl:message>
- <wsdl:portType name="aryan_soap_rfc_mi">
<wsdl:documentation />
- <wsdl:operation name="aryan_soap_rfc_mi">
<wsdl:input message="p1:aryan_req_soap_mt" />
<wsdl:output message="p1:aryan_soap_rfc_mt" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="aryan_soap_rfc_miBinding" type="p1:aryan_soap_rfc_mi">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
- <wsdl:operation name="aryan_soap_rfc_mi">
<soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
- <wsdl:input>
<soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="aryan_soap_rfc_miService">
- <wsdl:port name="aryan_soap_rfc_miPort" binding="p1:aryan_soap_rfc_miBinding">
<soap:address location="http://pi71server1.domain.com:50200/XISOAPAdapter/MessageServlet?channel=:aryan_3rdparty_recv_BS:aryam_soap_rfc_sender_cc&version=3.0&Sender.Service=aryan_3rdparty_recv_BS&Interface=http%3A%2F%2Faryansoap2rfc%5Earyan_soap_rfc_sender_cc" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Hii im trying to post my content of my wsdl file.. but in preview mode its loook like above ... actually thats my wsdl file only.. but when post a message .. it coming like above string.
Edited by: Balaji Pichaimuthu on Sep 3, 2009 7:02 AM

Soap to rfc scinario

In general in the soap to rfc scinnario if we will send the purchese order as request and we will get purchase order number as response. after getting the number what we will do with that number. is there is any imporatance. or we have to save that number some where?

Hi Ramakrishna
You can say this scenario like this
PO Number is the invoice created coresponding to your order. If you want you can trace your order by this PO number
and this info is stored in the Data Base
for more details on SOAP to RFC scnario follow these threads
/people/shabarish.vijayakumar/blog/2007/11/07/walkthrough--soap-xi-rfcbapi
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
/people/baris.buyuktanir2/blog/2007/03/06/how-to-create-a-web-service-with-attachments-soap-with-attachments
Regards
sandeep
if helpful kindly reward points

SOAP to RFC sync scenario

Hello members:
we have a business scenario: SOAP to RFC sync
an external system (ABC) sends documentrequest thru XI SOAP adapter and makes an RFC call to a BAPI and gets back the resposne to the ABC system.we are handling 4 mappings. 1. request msg to a common msg 2. common msg to BAPI request3.bapi response to common msg 4. common msg to response msg(which is same as the req msg)
i have the request msg and common msg as external definitions. I did the following steps and wanted to
know if i am right.
1. there are no data type & msg type needed for this
2. 4 msg interfaces
i) document o/b sysnc
ii) document i/b sync
iii)common o/b sync
iiii) common i/b sync
3) 4 mappings
i) document to common
ii) common to bapi req
iii) bapi resp to common
iiii) common to req/response
4) 3 intf mappings
source intf**********               target intf
i)document o/b               common o/b uses mapping #1
ii)request :common i/b         bapi i/b uses mapping #2
   resposne:bapi i/b           common i/b uses mapping #3
iii) common i/b             document i/b uses mapping # 4
pls provide your inputs if my approach is rite? do i need to have 4 msg intefaces?has any made mappings where 4 mappings are involved ( without BPM)
Thanks in advance

Hi,
I think you will have only 2 interfaces.
1. Sync Outbound interface (SOAP Structure)
    Two message types Req and Res
2. Sync Inbound interface (RFC Structure)
    Two message types Req and Res
Then two message mapping
1. SOAP Request to RFC Request
2. RFC Response to SOAP Response
and finally one Interface mapping.
Thanks,
Prakash

SOAP to RFC scenario (SFDC - ECC synch)

Working on a SFDC to ECC synch scenario using SOAP to RFC interface. I generated the WSDL for SFDC team and tested on soapUI, I am able to see the successful request/response structure in sxmb_moni.
However, when the SFDC team is sending the request in real time from SFDC, the request is successful in SFDC but not reaching PI and hence there is no response. The error I see in sxmb_moni for this is
<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PROXY_NOT_ALLOWED_ON_IS</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Are there any additional setting need to be done.
Please guide on this issue . Thanks
Edited by: jbagga on Nov 14, 2011 7:42 AM

SFDC sending request to PI. SFDC Request is not hitting PI, neither traceable in MONI or RWB.
SFDC request is not hitting PI . The ForeFront has allowed the SFDC IP range to target PI using reverse proxy rules. But SFDC and Forefront both get the "HTTP 500 internal server error"
The question is , I am helpless until the request is monitored anywhere in MONI or RWB_communication channel
Also SFDC receives some fault message error along with HTTP 500 i.e. Header Missing in Soap Message Header. In this case, also if its PI related error there should be at least some track of request hitting PI in MONI or RWB. also tried creating a WSDL with PI username and password in the WSDL under Header tags, still the same situation
ALL Ports are open by BASIS team.
Can someone point out any helpful solution. URGENT !! Thanks a ton in advance.
EVERYTHING , THE ENTIRE REQUEST/RESPONSE STRUCTURE WORKS PERFECT WITH SOAPUI.

SOAP TO RFC scenario (where the R/3 is not in same network)

Dear Friends,
I am trying to configure a SOAP to RFC (syn).where my SAP R/3 system is in our network .And we dont have all the details for creating a BUSINESS SYSTEM. I tried with BS.but every time I am getting "FAILED TO CALL ADAPTER ENGINE Error ,,,witha no_receiver_aggrement clause".
but i have done the same scenario where the R/3 system is in the same network.
I would like know ,what are the pre-requites for confeguring such a scenarion.And please give a detailed idea...
where what is required and why........
thanks,
jeevan.

Hai Raj,
Thanks for your reply.
My admin says.....the particular IP has full permissions...
One more thing when i am trying to import the BAPI request.I am able to get the data from the remote SAP.
So i believe everything is fine from NETWORK side.
And in the receiver RFC communication side I have seen just by changing the sap IP address to the public IP (Earlier the scenario was working fine with the local SAP system).
I doubt do I have to do in the SLD business system level.
thanks,
jeevan.

How to implement Exception Handling for soap to RFC sync interface...

Dear Experts,
we have an interface like soap to Rfc sync, already develepment is done and moved to production. but we are getting some quatitity is greater than item then it is throwing an error below. i want to handle that exception in XI level.
please guide i am not found any document for this type of interface.
Please suggest what can i do for this. Please share me the screen shot for this.
Error Log:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">Z_DEPOT_DISPATCH.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<rfc:Z_DEPOT_DISPATCH.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>Delivery quantity is greater than target quantity 10.000 MT</Text><Message><ID>VL</ID><Number>363</Number></Message><Attributes><V1>10.000</V1><V2>MT</V2></Attributes></rfc:Z_DEPOT_DISPATCH.Exception>
Regards,
Kiran Polani

Dear All,
This is clearly soap to rfc interface and we are using currently PI 7.0. This is a validation of BAPI, BAPI is not accepting the field of "Quantity is some value". The quatity is greater than the amount BAPI is throwing an error like "APPLICATION_ERROR". Is it possbile to validate in XI Level.
Soap --> XI--> BAPI(Request)
BAPI--> XI-->Soap(Response)( in this step what ever message return by bapi those error message not getting 3 rd party application).
here by catching that error and i should throw to 3rd party application.
is it possible to handle this or not.?
If it is possible in Fault Mapping/Fault message type please give me the steps or document for me.
I am new for fault mapping?
Please help me on this.
Regards,
Kiran Polani

A strange problem with SOAP - XI - RFC

Hi,
I have configured a SOAP-XI-RFC scenario. I want to execute the BAPI_MATERIAL_GET_LIST and BAPI_MATERIAL_GETDETAIL.
When i send the soap request through XMLSpy, I do not get the expected result. For getdetail even though i give a valid material number, it sends me a response saying ...
<RETURN>
<TYPE>E</TYPE>
<CODE>M3262</CODE>
<MESSAGE>Enter a material number</MESSAGE>
<LOG_NO/>
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1/>
<MESSAGE_V2/>
<MESSAGE_V3/>
<MESSAGE_V4/>
</RETURN>
and for getlist it does not return me anything.
i checked executing the BAPI directly in R/3 and it returns proper values.
The most surprising thing is that the messag monitor, sxmb_moni and all the monitors show a success message
Can anyone help me with this?
Any pointers will be of great help
Regards,
Rohit

Hi ,
Check your message mapping once again with the sample test using test tab...
The most surprising thing is that the messag monitor, sxmb_moni and all the monitors show a success message
RFC call successfully goes to SAP and gives a return message to XI.SO it is showing message..
sekhar

Soap to rfc..dont get a response...

Similar Messages

Maybe you are looking for