Soap TO RFC :-Empty SOAP RESPONSE

Dear Friends,
 I am doing a SOAP TO RFC scenario.And while testing the scenario using SOAP UI TOOL the response is EMPTY its like this.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header/>
 <SOAP:Body/>
</SOAP:Envelope>
Monitoring:-
In message monitoring :- its successful
In SXMB_MONI :-Its a checked Flag.
My Mapping is working fine.
Please help me in Tracing the Problem.
Regards,
jeevan

Hi Jeevan,
Did you check the payload in mapping editor? also check the mappings once more and check the thread
In RFc Response no data is coming
Thanks!

Similar Messages

Unable to connect SOAP to RFC using soap client.

I have tested the SOAP to RFC sync scenario today using a soap client.I have encountered the following error at the SOAP sender channel.
"java.lang.NullPointerException
at com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator.getQualityOfServiceAsString"
the only possible solution found till now through forum is to apply SAP NOTE 1239995. As it is confirmed that SAP note 1239995 is already in the system , request you to post it to SAP for getting any OASIS note . I am also posting the message to SDN forum to get some help.
We are able to connect to the integration server, but are unable to connect through the communication channel.
Is there any othere OASIS notes need to be applied here? Or any other information is need which i am missing ?
regards,
Abhishek

You are in the right track. Looks like you need latest service pack for the soap channel. Follow this thread...
ADAPTER.JAVA_EXCEPTION XMBMessageOperator.getQualityOfServiceAsString error
This link says
Error in sending XML from SoapUI to SAP PI 7.11
This patch level will fix SAPXIAF06P patch #6 (SP-level #06)
Edited by: Baskar Gopal on Apr 5, 2011 4:33 PM

Synchronous RFC -- SOAP Scenario: problem with SOAP Response/Fault Mapping

Hi,
I've a synchronous RFC --> PI --> SOAP Scenario. The problem is that the message structure of the sending RFC doesn't match the Webservice Structure.
The (SAP standard) RFC has just a Request / Response message structure. Part of the Response Message structure is a exception structure.
The Webservice has a Request / Response message structure and in case of an error I get a SOAP:Fault.
Problem now is that I cannot configure that scenario without usage of BPM as I will have to map SOAP:Response or SOAP:Fault to the RFC Response structure.
Has anybody another idea to do that synchronous scenario (with usage of message mapping) without BPM?
BR
Holger

1)
you maus define 3 mapping.
1)request
2)response
3)Fault
in Interface mapping define at response boths (2-3) mapping. its clear??
2)
otherwise sometjhing is not clear, why do you want fault?? why dont you get only response message. we implement this kind of response:
<response_MT>
<ID> (error ID)
<system> (target system)
<error> (Error Description)
</response>
by this way fault message is not needed. but if you must have it just follow the top of message else, propose second.
Thanks
Rodrigo
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 25, 2008 11:52 AM

SOAP to RFC - Sync Scenario. How to find where the response is going to?

Hello All
I have a SOAP to RFC sync scenario.
In SXMB_MONI, i see that both the initial message and the response message are successfully processed.
But, the SOAP sender is not receiving the response message.
How can i trouble shoot this scenario? How can i findout what is going wrong?
Most importantly, How can i find out the web address of the SOAP sender? I do not see it anywhere.
Thanks

Hi Chandra,
Please check this blog.
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
You can by pass your message through a TCPIP gateway , this will help you to see the message contnet and the SOAP header information.
TCPIPGW application is availabel in one of the SAP notes for Monitoring SOAP adapter. and 2 SAP SDN PI blogs are also there on how to use this application...
Regards
Sunil.

Soap to rfc..dont get a response...

I have pasted below the complete steps for doing a rfc to soap synchronous scenario...i can send a message and update a custom table in r/3 with the data..however i am not getting any response, i have tested the rfc on r/3 and checked the table ..which is getting updated correctly....any ideas on whats wrong .....More important areas are the items in bold.....which is where i think smthing is not ok.
Design..part........
Create data types
1) testScore_dt
2) testScoreResponse_dt.
Create 2 msg types for 1 and 2...
testScore_MT
testScoreResponse_MT
Create Message Interface
MI_TestScore
Outbound Message Interface Synchronous
input Message is testScore_MT
outputMessage is testScoreResponse_MT
Import rfc
ZRfc_testScore
ZRfc_testScoreResponse
Create 2 message mappings
MM_Input_001
Source is testScore_MT
Destination is ZRfc_testScore
MM_Output_001
Source is ZRfc_testScoreResponse
Destinatio is testScoreResponse_MT
Create 1 Interface mapping
Source is MI_testSource
Target is ZRfc_testScore
Request tab...choose mapping as MM_Input_001
Response tab ...choose mapping as MM_Output_001
Configuration...
Create Sender_BService
Create Reciever_BService
Create Communication channels
CC_Sender_Soap
default namespace
interface = MI_TestScore
CC_Reciever_RFC
Do Reciever determination
Sender = Sender_BService
Interface == ?
Do Interface determination
Need Help ?
Sender Agreement
Sender CC
Reciever Agreement
Reciever CC
Regards
Ravi Raman

Ravi,
I believe your scenario is SOAP to RFC, coz the title and your explanation misleading to different scenarios.
>>>>>>>Do Reciever determination
Sender = Sender_BService
Interface == ?
Do Interface determination
Need Help ?
Receiver Determinatio
Sender = Sender_BService
Interface =MI_TestScore
Configured receivers = Receiver_BService
Interface Determinatio
Sender = Sender_BService
Outbound Interface =MI_TestScore
Inbound Interface = RFC
Mapping = Interface mapping.
raj.

RFC- XI -SOAP and response back to RFC

Hi,
I am doing RFC-XI-SOAP and get response back from SOAP to RFC.
if I am not check the "Do Not Use SOAP Envelop" then it gives error in SXMB_MONI says - NO SOAP envelop.
"No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK"
if I check thet check bos ""Do Not Use SOAP Envelop" then it gives no error in SXMB_MONI , but message is not giving response back from webservice in SXMB_MONI it shows only
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
gurus ...Pl. reply asap

hi, all
you are right the XML sp/tcpgateway response structure is different than what I used earlier,
now I build the same structure,but then also some problem occures it is giving only one element from structure in response.
it is giving
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<STATUS>Success</STATUS>
</ns1:MYRFC.Response>
while actual inbound from WS is ...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ns0:testrequestResponse xmlns:ns0="conversion" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" Status="Success" DbgCmd_="testrequest" DbgTag_="REQUEST">
- <ns0:SAP_OUTPUT>
<ns0:E1 Value="3000194" />
<ns0:E2 Value="300"/>
<ns0:E3 Value="3"/>
</ns0:E4 Value="94">
</ns0:testrequestResponse>

RFC - XI - SOAP ERROR.

I get a difficult error now, following is the error.
my scerio is rfc -> xi -> soap.
http://90.3.9.11:7001/axis/DocumentService.jws?wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:intf="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:message name="exportFileBySapIDRequest">
<wsdl:part name="userID" type="xsd:string" />
<wsdl:part name="mySingleID" type="xsd:string" />
<wsdl:part name="sapID" type="xsd:string" />
</wsdl:message>
- <wsdl:message name="exportFileBySapIDResponse">
<wsdl:part name="exportFileBySapIDReturn" type="xsd:string" />
</wsdl:message>
- <wsdl:portType name="DocumentService">
- <wsdl:operation name="exportFileBySapID" parameterOrder="userID mySingleID sapID">
<wsdl:input message="impl:exportFileBySapIDRequest" name="exportFileBySapIDRequest" />
<wsdl:output message="impl:exportFileBySapIDResponse" name="exportFileBySapIDResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="DocumentServiceSoapBinding" type="impl:DocumentService">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="exportFileBySapID">
<wsdlsoap:operation soapAction="" />
- <wsdl:input name="exportFileBySapIDRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://DefaultNamespace" use="encoded" />
</wsdl:input>
+ <wsdl:output name="exportFileBySapIDResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://90.3.9.11:7001/axis/DocumentService.jws" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="DocumentServiceService">
- <wsdl:port binding="impl:DocumentServiceSoapBinding" name="DocumentService">
<wsdlsoap:address location="http://90.3.9.11:7001/axis/DocumentService.jws" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Design **************************************
DT_exportFileBySapIDRequest
--> exportFileBySapIDRequest
 -> userId
 -> mysingleId
 -> sapId
DT_exportFileBySapIDResponse
--> exportFileBySapIDResponse
 -> exportFileBySapIDReturn
exportFileBySapIDRequest(Message Types)
exportFileBySapIDResponse(Message Types)
MI_RFC_TO_Webservice (Synchronous Inbound)
exportFileBySapIDRequest
exportFileBySapIDResponse
MM_RFC_TO_Webservice_Req
Z_XI_FI_MAILTEST <----> exportFileBySapIDRequest
MM_RFC_TO_Webservice_Resp
exportFileBySapIDResponse <-----> Z_XI_FI_MAILTEST.response
IM_RFC_TO_Webservice
Z_XI_FI_MAILTEST MI_RFC_TO_Webservice
Configuration ************************************
Communication Channel
sender : SAP_Sender_RFC_SEP
receiver : RFC_TO_Webservice
 target url : http://90.3.9.11:7001/axis/DocumentService.jws
sxmb_moni Trace ************************************
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sscxidev:8001</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 90.3.9.13</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - MYS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) MYS MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping BA9D2B14DB953699A6F72BB0C992416E</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping CAB00A010BF111DBCC73F1B85A1E0C79</Trace>
<Trace level="1" type="T">Interface Mapping http://xi.mySingle.draft.send IM_MYS</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_MYS_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_MYS_ completed. (executeStep() of com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">http://xi.mySingle.draft.send.MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Channel found: - MYS - FS_MysEmpty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://sscxidev:50100/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Async processing: skip mapping of response</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks.

Have you cheked this blogs?
If you havenot,
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

SOAP and RFC

Hi All,
My scenario is SOAP-PI-RFC,
The webservice is being triggered from PORTAL-BPM and the values are updated to ECC through a RFC,
Could anyone explain me in detail for the following below queries,
1.I have created RFC connection as ABAP type for ,
a)PI-ECC(RFC)
b)ECC(RFC)-PI
is that fine ?
2.Other than JCo connections is anyother connections are needed for Portal-PI connectivity.
3.Should I need to install ESR content in to PI(7.1) server
Regards,
Lavanya

Hi All,
When the WSDL is being called by portal team,they are getting error as
"An error while downloading WSIL file. Error message: Deserializing xml stream http://xxxx:0000/sap/xi/engine?type=entry failed.com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Invalid Response Code: (500) Empty HTTP request received. The requested URL was:"Connect to http://xxx:50000/sap/xi/engine?type=entry, used user to connect: xxx"
Regards,
Lavanya
Edited by: Lavanya Balanandham on Mar 11, 2011 5:08 AM

SRT 031 Empty SOAP Message received

Hello,
I have an external Web service wich it works under SOAPui, but when I generate a Proxy and a port in SAP using the WSDL file , and then i try to test it I have this error message.
SOAP:1 031 SRT: Empty SOAP message received
How can I solve this problem?
Thanks in Advance.

Hi Jitendra,
We are having similar problems, we're getting the SRT 031 Empty SOAP Message received error but the RFC destination is set up OK.
Running the same webservice from other tools gets a response OK, so the issue must be on the ABAP/SOAManager side of things
Do you have any more ideas of how to troubleshoot this?
Thanks in advance
Tony

WebService no NW DS e utilização no NW PI (RFC to SOAP)

Prezados, bom dia.
Um grande help de vcs ...
Gerei um EJB Stateless bem simples no Developer Studio 2004s. Em seguida criei um WebService (Virtual Interface, WSD e Configuration) a partir do bean criado. Finalmente gerei o EAR e fiz o deploy no Servidor.
Feito isso, o WebService gerado aparece no WebService Navigator e consigo executá-lo perfeitamente.
Agora vem os problemas:
#1 - No WebService Navigator tem uma opção de fazer o download do WSDL. Eu fiz isso e importei no PI (External Definitions). Só que os parâmetros expostos no WS não aparecem na aba Message do PI, com isso, eu não consigo utilizar esse WSDL no Message Mapping, Message Interface, etc. Alguma sugestão de como devo proceder para gerar o WSDL correto ou mesmo o XSD?
#2 - Como não consegui importar o WSDL no PI, gerei o DataType, MessageType, etc na unha, configurei a interface no Integration Configuration, SOAP Adapter, RFC Adapter, Receiver Determination, etc, etc, etc ... Quando executo a RFC, na SXMB_MONI a interface aparece como se tivesse sido executada corretamente, mas no RWB aparece o seguinte erro quando pesquiso pelo canal SOAP configurado: Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
Desde já agradeço toda e qualquer ajuda.
Grande abraço a todos.
Hyalen.

Ola, acho que vc já deve ter conseguido resolver esse problema, mas vamos lá, quanto a interface RFC estar ok no monitor de msgs do PI e com erro no RWB isso ocorre devido ao processo ter transcorrido ok durante toda a msgeria, ou seja, o processo recebeu a msg, fez o mapping transformation, chamou a rfc e finalizou o processo, no RWB porem, que mostra o resultado da chamada desse processo final, retorna o erro que a RFC ou conexao nao foi encontrada, podem ser dois fatores ai, o RFC Destinations (SM59) entre seus ambientes foram criados corretamente e os testes deles estao ok? A RFC realmente existe no ambiente que esta tendo que enviar? O comunication channel esta criado no local correto apontando para o ambiente correto?
Quando ao WSDL, para poder dar uma analisada nele coloque ele aqui no forum por favor, porem vc poderia fazer um testes com o SOAP UI ( aplicativo para testes de webservices ) que é disponivel gratuitamente para verificar se a assinatura do servico esta correta.

Error while Testing Soap To RFC

Hi All,
While doing Soap To RFC I got the following error in testing part :
The SOAP response indicates that an error occurred:
Server Error
<detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
com.sap.aii.af.lib.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $)
 at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:428)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
 at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
 at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
 at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
 ]]></text>
 </s:SystemError>
 </detail>
Please help me out to solve this.
Regards,
Nutan

1 Check your seder soap url.
2 check your host in RFC destination
use these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79 - how to use soap adapter
RFC -> XI -> WebService - A Complete Walkthrough (Part 1) - rfc to xi to webservice(soap)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) part-2
Invoke Webservices using SAPXI - invoke the web service
The specified item was not found. - sender rfc adapter steps
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131- [original link is broken] [original link is broken] [original link is broken] Looking for replacing SAP.NET connectors with SAP XI

Soap to rfc scinario

In general in the soap to rfc scinnario if we will send the purchese order as request and we will get purchase order number as response. after getting the number what we will do with that number. is there is any imporatance. or we have to save that number some where?

Hi Ramakrishna
You can say this scenario like this
PO Number is the invoice created coresponding to your order. If you want you can trace your order by this PO number
and this info is stored in the Data Base
for more details on SOAP to RFC scnario follow these threads
/people/shabarish.vijayakumar/blog/2007/11/07/walkthrough--soap-xi-rfcbapi
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
/people/baris.buyuktanir2/blog/2007/03/06/how-to-create-a-web-service-with-attachments-soap-with-attachments
Regards
sandeep
if helpful kindly reward points

SOAP --XI ---RFC or Java Client Proxy

Hello Gurus,
Need your adivce for a scenario in XI
Scenario --- To implement XI with SAP SCEM(Supply Chain Event Management).
Client is sending data from Web Portal (JSP Page) and wants to integrate with R/3.
(Request from client and Response from R/3 shown again at browser )
Web Portal (JSP Page) is on server A and XI on server B
Queries ---
1. Can I use Java Client Proxy Approach --- proxy --- xi -- rfc approach
If Web Portal (JSP page) is working in server A and XI in server B then can I call xi server from jsp page by passing xi server credential (username,password,bus service) and using sync Interface I can show result back to browser.
2. For SOAP Approach -- SOAP -- XI --- RFC approach
Suppose I need to send two parameters from my Web Portal (JSP page) to xi to R/3 and it will return some result.
Concept of Webservice --- any application (like BAPI ) exposed.
a. Pls tell me all the steps required for IR and ID
b.How can I invoke that generated webservice from my jsp page --- so that my request parameters values go to xi from my jsp page and to R/3 and then result from R/3 to xi and to my jsp page.
Regards

I think second approach is more appropriate ie. SOAP>XI>RFC
Some of the blogs you can refer:
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
Sender SOAP adapter config: http://help.sap.com/saphelp_nw04s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Hope this helps,
Rgds,
Moorthy

RFC to SOAP Interface - Problem in Request Message Mapping

Dear All,
We are working on RFC to SOAP Scenario i.e. pulling out data from an WebService from SAP via PI.
In Request Message Mapping, when the wsdl file is uploaded as Target Message, the wsdl request shows the nested elements like below.
<Request>
 <Request_New>
 <PAR1>xyz</PAR1>
 <PAR2>123</PAR2>
 </Request_New>
</Request>
But the desired Request should go like below.
<Request>
 <PAR1>xyz</PAR1>
 <PAR2>123</PAR2>
</Request>
Hence it gives an error saying that the tag Request_New does not exist.

Dear All,
Our target webservice cotains multiple methods.
The every method contains its corresponding request, response and SQL ecxeption as messages.
In case of request structures, every method (except crmPaymentReceived) contains more than 1 root element.
So while calling those methods having more than 1 root element, the additional header tag will always appear(not avoidable) in the request coming from SAP PI.
For Example,
Request Structure for method u2018isLoginIdExistu2019 (having more than 1 root element)
<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing"> -
>>>>> u201CThis Header tag will always appear u201D
<isLoginIdExistin0>asp</isLoginIdExistin0>
<isLoginIdExistin1>1</isLoginIdExistin1>
</ns1:isLoginIdExistRequest>
</soap:Body>
</soap:Envelope>
For this method, we get the error(saying that ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing" does not exists).
Request Structure for method u2018crmPaymentReceivedu2019 (having only 1 root element)
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd=http://www.w3.org/2001/XMLSchema-instance xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<ns1:crmPaymentReceivedin0 xmlns:ns1="http://netpricing">false</ns1:crmPaymentReceivedin0>
</soap:Body>
</soap:Envelope>
For this method, we get the success response.
I tested their wsdl URL in XMLspy and wizdal(a wsdl testing tool), it shows request in the format having only root elements and not the header tags.
But header tags will always appear when header tag contains more than 1 root element.
Can anybody suggest me how do I tackle this?
Thanks in Advance.

Error in Interface Sync RFC-XI-SOAP

Hi,
I have an interface RFC - XI - SOAP Sync.
The error appears only in PRD environment and is intermittent error.
Follow the message error in sxmb_moni:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Security.SecurityException: The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions. ---> System.Security.SecurityException: Requested registry access is not allowed. at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName, Boolean useMutex) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName) at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() --- End of inner exception stack trace --- at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception) at mServices.WebServices.mServices.CancelServiceOrderList(OrderTypeCancelTO[] orders) --- End of inner exception stack trace ---</SAP:AdditionalText>
Could you help me?
Thank a lot.
Maicon.

> {quote:title=Rosa Maicon wrote:}
> Hi,
> I have an interface RFC - XI - SOAP Sync.
> The error appears only in PRD environment and is intermittent error.
> The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions.
This looks like a permission error for the user role provided in production. try sending soap request from web client tool and see whether you get the same error.
Check whether you have all the permissions required and also check whether there is WS security in the production environment.
Regards,
Pavan

*Soap TO RFC :-Empty SOAP RESPONSE*

Similar Messages

Maybe you are looking for

Soap TO RFC :-Empty SOAP RESPONSE