Socket error on receive message on MDM 7.1 Console

Greetings -
This may be a simple question, but I couldn't find a solution, so here goes:
I have a new install for MDM:
OS: B.11.31 U ia64 (HP Unix)
MDM: 7.1.0.5
DB: Oracle 10.2.0.4
MDM Console Client : 7.1.0.5.92
I have MDM server and database on same server. When I go to connect to the server
and create a repository for the first time, I get the message "Socket error on receive".
This happens when I go to set my DBMS Settngs as well ...
I didn't see that on my Suse Linux 10 install.
I am looking at the logs, but I don't see what / why the initial call does not go through to the
database to set up connection. I have also put in fake SYSTEM / Password in the settings
and I get the same message. It seems that it doesn't get to the point where it authenticates
to the database(??).
I do have a core file. If I do a 'strings' on the core file, it appears that there is a connection
trying to happen. In the nohup.out file, I see this:
[[excerpt]]
[[INFO]] <MDM/Servers/MDS/MDSCommon/XCSGlobalFunctions.cpp:410> "User authentication method: Repository"
ConnectionAcceptor::ConnectionAcceptor(): bind() failed with errno=0x000000E2 'Address already in use'
Trying again for 120 seconds
[/excerpt]
Though this could be a misleading message ...
Few question:
How can I determine how to trace / see how the Console is trying to connect to the
MDM server / database?
How can I figure out what address this is talking about?
Is this just a vague error or should I be looking somewhere specific for troubleshooting?
Please advise!
Thanks!
-s
Edited by: Shaunn Johnson on Nov 12, 2010 9:20 PM

Everyone -
We have a solution, however, it introduces a lot of new things that will require some
investigation. Before I go to that level, let me tell you what we did to resolve:
Recap:
Our MDM installation is on a shared OS (HP Unix) environment. It is not virtual. In short,
we have one large server and multiple application that have their own logical IP Addresses
and hostnames.
When trying to connect from the MDM console (laptop/workstation/etc), through the application
(MDM server) to the database (on the HP Unix system) and create a repository, this is where we
see the 'Socket on receive' error.
Solution:
As per SAP "Note 1264660 - MDM on HP-UX IA crash when used with Oracle 10.2.0.4 client",
part of the problem is because of how Oracle binds to a specific socket. By itself, that
solution did not work. This effects the server side, too. The next steps to fix this were to:
extract the SAP OCL10264.SAR files in the shared client directory (/oracle/client/10x_64/instantclient)
backup the library files from the server-level area of Oracle (/oracle/<SID>/102_64/lib)
stop Oracle, the listener and MDM
copy the SAP OCI files (as noted in 1264660) to the /oracle/<SID>/102_64/lib directory also
verify the Oracle environment variables
restart all systems and services (Oracle, MDM, listener)
Of course, your oracle library paths will vary. Check your LD_LIBRARY_PATH for that location.
We also learned that if we set the LD_LIBRARY_PATH environment variable to where the
oracle client library files were (client side), things should work. We did try that, but it did
not work. At least, we tried it once and started to test other things (including our solution).
Feel free to try that option and update this thread.
Our solution was to copy those files directly into our server path and try again.
Thanks to everyone who took time to look at this!
-s

Similar Messages

Error while receiving message from partner.

HI All,
i am having interface Thrid Party -- > XI -- > SAP
We are using AS2 adapter at sender side and IDOC as receiver end.
My scenerio was working fine till quality server and when we went live message started failing in seburger workbench.
AS2 message: DECRYPTION_ERROR
While when we are sending EDI message to same partner its working fine.
Can any one help me on this.

Do you mean that you use same Decryptoin certificate for both Quality and Production server? Confirm this from your partner. Also, this certificate should be present in Visual Admin/NWA of your production PI server and the name used while importing should be exactly same as the name mentioned in the channel.
Regards,
Prateek

When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

I have the same issue. Does anybody know why this has happened

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive:Please wait... If this message is not eventually replaced by the proper contents of the do

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive: Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps

Error message when trying to receive messages

hi
i am unable to send or receive messages.
when trying to send an email i get this message: 'An error occurred sending mail: The mail server sent an incorrect greeting: Cannot connect to SMTP server 213.8.196.24 (213.8.196.24:25), NB connect error 1460.'
when trying to receive messages i get this message: 'An error occurred with the POP3 mail server. Mail server mail.print-city.co.il responded: '
the problem has just started, i didnt change anything from what was before. internet connection looks ok.
i am attaching the error messages and my account settings.

I finally solved my problem by deleting both accounts and then adding them back via tools - account settings - account actions. It was actually pretty simple... all I had to know was email addresses and passwords. Trying to correct the account settings didn't work for me or for the ATT tech I contacted.

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William

Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William

reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.

Received message iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 127).

I received message iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 127).
Now I can't open iTunes and can't find previous version to reinstall . This is on my old computer with Windows XP.
Does anyone know how to fix the problem.

If the article above doesn't sort you out then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. (Similar to Apple's article but with some resources for when things go wrong). Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Error Transmitting the message to endpoint -Received HTTP response code 401

Hello Experts,
I am having a SOAP to Proxy scenario. We are using HTTPS without client Authentication.
Everything is running fine and well set on DEV system. After transporting to Test system, i am getting error as :
Error Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
I get HTTP 200 Ok response in my soap client but the message is not reaching to Integration Engine. It is failing with above error. On CC monitoring for SOAP adapter it shows call completed successfully. But when I use the mesage ID from CC monitoring in Message monitoring i get the error as shown above in Audit log.
I have checked for Roles attached to my user on DEV and Test systems , I have same roles on both systems.
Any inputs to solve this problem will be very helpful to me. Let me know which service users i need to check for this issue?
Thanks in Advance,
XI Queries.

Hi Pinang,
Thanks for input.
1) Check Role -SAP_XI_APPL_SERV_USER is there in XIAPPLUSER or not.
->Done. Its Ok.
2) check tyour port entry is like J2EE port 5<System no> or not.
->Done. Its Ok.
3) If the error in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
->This note refers in case it happens with high load. I am just sending a small request and no one else is using / testing this interface. So no high load.
4) Check password for user XIISUSER
-> Basis team said they checked for all Xi users and they are not locked.
5) Check password for user XIAFUSER
-> Basis team said they checked for all Xi users and they are not locked.
Any other hints will be helpful.
Kind Regards,
Xi Queries.

Error SocketChannel receive multiple messages at once?

Hello,
I use Java NIO, non blocking for my client-server program.
Everything works ok, until there are many clients that sending messages at the same time to the server.
The server can identify all the clients, and begin reading, but the reading of those multiple clients are always the same message.
For example, client A send "Message A", client B send "Missing Message", client C send "Another Missing Message" at the same time to the server, the server read client A send "Message A", client B send "Message A", client C send "Message A", only happen if the server trying to read all those messages at once, if the server read one by one, it's working perfectly.
What's wrong with my code?
This is on the server, reading the message:
private Selector               packetReader; // the selector to read client message
public void update(long elapsedTime) throws IOException {
if (packetReader.selectNow() > 0) {
    // message received
    Iterator packetIterator = packetReader.selectedKeys().iterator();
    while (packetIterator.hasNext()) {
      SelectionKey key = (SelectionKey) packetIterator.next();
      packetIterator.remove();
      // there is client sending message, looping until all clients message
      // fully read
      // construct packet
      TCPClient client = (TCPClient) key.attachment();
      try {
        client.read(); // IN HERE ALL THE CLIENTS READ THE SAME MESSAGES
           // if only one client send message, it's working, if there are multiple selector key, the message screwed
      } catch (IOException ex) {
//      ex.printStackTrace();
        removeClient(client); // something not right, kick this client
}On the client, I think this is the culprit :
private ByteBuffer            readBuffer; // the byte buffer
private SocketChannel client; // the client SocketChannel
protected synchronized void read() throws IOException {
readBuffer.clear();    // clear previous buffer
int bytesRead = client.read(readBuffer); // THIS ONE READ THE SAME MESSAGES, I think this is the culprit
if (bytesRead < 0) {
    throw new IOException("Reached end of stream");
} else if (bytesRead == 0) {
    return;
// write to storage (DataInputStream input field storage)
storage.write(readBuffer.array(), 0, bytesRead);
// in here the construction of the buffer to real message
}How could the next client read not from the beginning of the received message but to its actual message (client.read(readBuffer)), i'm thinking to use SocketChannel.read(ByteBuffer[] dsts, , int offset, int length) but don't know the offset, the length, and what's that for :(
Anyone networking gurus, please help...
Thank you very much.

Hello ejp, thanks for the reply.
(1) You can't assume that each read delivers an entire message.Yep I know about this, like I'm saying everything is okay when all the clients send the message not in the same time, but when the server tries to read client message at the same time, for example there are 3 clients message arrive at the same time and the server tries to read it, the server construct all the message exactly like the first message arrived.
This is the actual construction of the message, read the length of the packet first, then construct the message into DataInputStream, and read the message from it:
// packet stream reader
private DataInputStream input;
private NewPipedOutputStream storage;
private boolean     waitingForLength = true;
private int length;
protected synchronized void read() throws IOException {
readBuffer.clear(); // clear previous byte buffer
int bytesRead = client.read(readBuffer); // read how many bytes read
if (bytesRead < 0) {
    throw new IOException("Reached end of stream");
} else if (bytesRead == 0) {
    return;
// the bytes read is used to fill the byte buffer
storage.write(readBuffer.array(), 0, bytesRead);
// after read the packet
// this is the message construction
// write to byte buffer to input storage
// (this will write into DataInputStream)
storage.write(readBuffer.array(), 0, bytesRead);
// unpack the packet
while (input.available() > 0) {
    // unpack the byte length first
    if (waitingForLength) { // read the packet length first
      if (input.available() > 2) {
        length = input.readShort();
        waitingForLength = false;
      } else {
        // the length has not fully read
        break; // wait until the next read
    // construct the packet if the length already known
    } else {
      if (input.available() >= length) {
        // store the content to data
        byte[] data = new byte[length];
        input.readFully(data);
        // add to received packet
        addReceivedPacket(data);
     waitingForLength = true; // wait for another packet
      } else {
        // the content has not fully read
     break; // wait until next read
(2) You're sharing the same ByteBuffer between all your clients
so you're running some considerable risks if (1) doesn't happen.
I recommend you run a ByteBuffer per client and have a good look
at its API and the NIO examples.Yep, I already use one ByteBuffer per client, it's not shared among the clients, this is the class for each client:
private SocketChannel client; // socket channel per client
private ByteBuffer readBuffer; // byte buffer per client
private Selector packetReader; // the selector that is shared among all clients
private static final int BUFFER_SIZE = 10240; // default huge buffer size for reading
private void init() throws IOException {
storage; // the packet storage writer
input; // the actual packet input
readBuffer = ByteBuffer.allocate(BUFFER_SIZE); // the byte buffer is one per client
readBuffer.order(ByteOrder.BIG_ENDIAN);
client.configureBlocking(false);
client.socket().setTcpNoDelay(true);
// register packet reader
// one packetReader used by all clients
client.register(packetReader, SelectionKey.OP_READ, this);
}Cos the ByteBuffer is not shared, I think it's impossible that it mixed up with other clients, what I think is the SocketChannel client.read(ByteBuffer) that fill the byte buffer with the same packet?
So you're probably getting the data all mixed up - you'll probalby be seeing a new client message followed by whatever was there from the last time, or the time before.If the server not trying to read all the messages at the same time, it works fine, I think that if the client SocketChannel filled up with multiple client messages, the SocketChannel.read(...) only read the first client message.
Or am I doing something wrong, I could fasten the server read by removing the Thread.sleep(100); but I think that's not the good solution, since in NIO there should be time where the server need to read client multiple messages at once.
Any other thoughts?
Thanks again.

Idoc ORDERS returned by PI with message "External Error Header Received"

Hello,
I would appreciate if somebody can help on this :
I'm sending idocs ORDERS05 from R/3 4.6C to PI 7.01.
Idocs are generated and sent successfully from R/3 but are not generated in PI.
From R/3, Idocs are visibible in T BD87 and are classified under "Idocs in target system" with :
- status 56 : "External Error Header Received"
- idocs have a number in R/3 but no partner idoc number
- Partner number is the purchase order vendor number
Thanks a lot for your help.
CCH

Hello,
Thanks a lot for those helpful replies.
Looking in the sxmb_moni, xml messages is blocked and error message is "Error while reading ID of own business system from
the SLD for system SND and client 320"
-I have ckecked the SLD and technical system SND-320 is well linked to business system SND-320.
-I have ckecked SM59 and tested the html link between XI and SNC but reply is "empty reply". Am I supposed to have a positive check at this point ?
-I have checked my distant user in SAP SNC and change its role to SAP_XI_IS_SERV_USER_MAIN
Concerning we20 in XI, I can't declare an the HTTP connection SND-320, not recognized as a Logicial System
At this point, Idocs are reaching XI from R/3 but don't reach SNC.
Regards,
Cédric

Messages (-1) error - can't send or receive messages

Haven't been able to send or receive messages since last night. Error shown in link below. Really strange. Don't remember doing anything in particular that might have caused it.
http://img217.imageshack.us/img217/6581/photogo.png

Dankton, pls ignore the No Sim thing. Its the same error with the sim also, I've taken out the sim and put it into my old 3GS that lets me send/receive msgs. The error is the same with or without the sim.
Can't even access all my old messages.

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Socket error on receive message on MDM 7.1 Console

Similar Messages

Maybe you are looking for