Soft release 10.2.1.2941

OS version 10.2.1.3175
After I update to last soft release 10.2.1.2941 all my android apps stop working.
All work`s perfectly before update.
Nw if I start any of them, it`s start initialising and after short time get me out to the main screen.
Don`t tell to me reinstall apps - already try it. Didn`t work as solution.
Any ideas how can I roll back to the previous soft release?

i have update to sofware Realease 10.2.1.2941 and it work normaly include android apps. try to restart the device
Ades Ganteng

Similar Messages

  • Does the CE-505 run the latest ACNS soft release ?

    They are offering me one second-hand device that should be great at my home. Can be upgraded to latest release ? Does it have any limitations ? Despite the difference in hardware performance (which in my case will not be an issue) does it have any differences with the new content engines series ? Anything important I should know ? Please advise, thanks !

    CE-505 does not t support the 4.x code

  • WLC2106 + LAP1131AG configuration help request

    Greetings Everyone.
    One of my customers asked me to configure a WLC 2106 and 2 LAP 1131AG (lightweight) for corporate/guest Wifi.
    Basicly they want to implement a good wifi connection for internal use and a guest one with different QoS. The two lans
    should both have dhcp but they must bet kept segregated so that none from the Guest wifi can access corporate resources.
    Since i've never configured a WLC from scrath i lightly supposed it would be quite straigh forward as routers and switches from Cisco.
    Unfortunately i was totally wrong.
    I've downloaded the "Cisco Wireless LAN ControllerConfiguration Guide" (Soft.Release 6.0 June 2009) and after i red it i made up this workflow
    for the configurations:
    1) Configure Controller: (via serial)
         -     Set Management Interface parameters (IP- SM - Def GW - Dhcp server IP)
         -     Set Ap-Manager Interface  parameters
         -     Virtual Interface parameters
         -     Set Admin Credentials
         -     Dhcp Configuration (internal and/or external)
    2) Ap registration on the controller
         -     Configure vlan with dhcp request redirection to the dhcp server
    3) Configure Wlan following customer's requests.
         -     Configure Wlan Auth for Corporate/Guest Wifi
         -     Configure QoS for both Wlans
    Unfortunately i'm experiencing issue while trying joining the AP to the WLC.
    It appers that the IT guy of my customer tried to configure one of the Ap.
    In that Ap's flash i find files referring to a "mesh" configuration like:
    mesh_cfg.txt - mesh_port_cfg.txt
    which are not present on the other Ap.
    I've tried to register both the Ap using:
    1) Internal DHCP
    2) External DHCP (microsoft W2k8 R2) 
    3) External DHCP (non cisco router)
    But as a matter of fact they got the ip from dhcp but they don't show up in the WLC GUI.
    So, resuming my issues sounds like:
    1) Can't make Ap join the WLC
    2) There are configuratin file on one Ap that i can't clear
    3) DHCP configuration is probably wrong.
    Since i'm quite lost, i'm ready to learn from anyone who could spare some time helping me out.
    Thank you in advance!
    Regards
    Alessio
    P.S.
    Ap version is the following:
    Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Wed 11-Aug-10 15:39 by prod_rel_team
    ROM: Bootstrap program is C1130 boot loader
    BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

    Good Day Everyone.
    After a long fight, the insights of Stephen and Scott  and:
    https://supportforums.cisco.com/docs/DOC-13960  and
    https://supportforums.cisco.com/thread/2003153
    I finally managed to wipe the old configuration and to configure a LAP 1131 attached to one of the POE of the controller.
    After having configured a Wlan and having set the correct DHCP redirection i'm able to connect and get an ip! (WHOA!)
    I've had to set a manual ip address on the AP (let's call AP1 from now on) and to manually point it to the controller.
    I was thinking about using this configuration at the customer's site getting ips from the internal DHCP and thus letting employees using the internal resources of the company.
    With the same idea, i started to configure the second AP (AP2 from now on).
    So i set up a dynamic interface, always on physical port 1 of the controller, gave it an ip address on another class.
    Got into the antenna via console and set an ip accordingly.
    I expected the controller and the antenna to communicate immediately as the AP1 did before BUT:
    LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
    LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
    %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
    %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
    And keep reloading itself on, and on, and guess? Yes, on.
    I'm sure i took a wrong step somewhere, could someone be so kind to enlighten me about it?
    Thanks in advance!
    Alessio

  • This event is displayed in local time, but was created in Brisbane (+10)

    I've seen similar errors some time ago but never had the issue myself. Now suddenly events created on the devices (Q10 and Z10) get this notification when opening the entry. The information itself, start time - end time, is correct and will also sync correctly to the calendar but it is annoying and users complain about it. Will this bug ever be fixed for good? It seems to keep coming back for one time zone at the time..
    Z10 - SW Release 10.2.1.2941 / OS Version 10.2.1.3175

    HI,
    i have the same problem. Every entry entered in Q10, correct setting of time zone.
    After the sync the time zone is forgotten. Every entry, entered in BES have to be corrected after sync.
    Several versions of lotus traveler  - still the same problem.
    I cannot understand, that I cannot find a fix from blackberry for more than 6 month.
    I've hope on the new firmware / Bes version 10.3.
    Q10 running on 10.2.2.984

  • Cisco 4900M integrated X2 ports, CVR-X2-SFP10G and SFP-10G-SR

    Hi,
    We are going to order two(2) cisco 4900M switches for core and twelve (12) 2960S switches for access (4 stacks with 3 switches each), connected to the core with 10G MM optical paths (up to 300M each).  In addition I have one gigabit half-card but it is not related to my questions here. Please see my attached diagram.
    So my questions are:
    1. Point 1.Can we use integrated eight X2 ports of every of the both 4900M switches as plugging into four of them four convertors CVR-X2-SFP10G and to plug on every of the convertors sfp tranceivers SFP-10G-SR - as it is described on the diagram, or I need for something more in addition to described? I found only some minimum soft releases to use as requirement to use these convertors and sfp tranceivers, but is there something additional I need?
    Note:I'm asking that because Dynamic Conf Tool doesn't give me to do such configuration, actually these convertors and SFPs are missing there at all, but it sometimes happens with some products...  In documentation it is described this should work (if I didn't pass something which is my main consern and why I'm asking here).
    2.Point 3.If this shouldn't work, the other alternative (not described in my diagram) is to use X2-10GB-SR modules without any SFPs - just ot use SC connectors for the optical cables instead of LC. So my question in that case is will 10G links work between X2-10GB-SR at one side and SFP-10G-SR at the other side where I have 2960S switches and this is the only option? Is is expected to have some problems in that scenario?
    Note:Actually if Point 1 is workable I prefer to use it instead of Point 2 because of minor price optimization when using SFPs with convertors in comparisson to X2-10GB-SR.
    3. If the both variants are possible, which one is preffered and why, what advantages does it have (for example low latency of something else)?
    Thank You in Advance
    Asen

    Just for your information, a fiber link does not care if one end of the fiber has an GBIC (SC-type connector) and the other end has a SFP (LC-type of connector); or any other transceiver footprint (X2, CFP, etc.)..  The thing that is important is that each module is the same specification, and matches the fiber type and link length of the network (10GBASE-SX in this example).
    Good luck.

  • Email pic's are sideways

    Whenever I send portrait pictures in email it sends them sideways.  Doesn't matter if the camera lense is on the top of the device when I take the picture,or bottom.  Landscape sends ok as long as the lense in on the top of my device Even if I rotate the picture on my blackberry it doesnt chge the rotation of the picture. I have turned rotation lock off (which is soooo annoying), hasn't helped.  I have software release 10.2.1.2941, I have turned off mydevice and removed the battery.   Even when I transfer files to my computer I have to rotate them all.  
    Thanks!

    I don't have a solution but I think it's something to do with pixel size and filling the screen, fundi's recommend always taking pictures in landscape mode with cellphones because of the narrow picture in portrait mode when displayed on a TV screen.

  • Material shortage ( soft or hard error ) while releasing production order?

    Hi Guys
    I  am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage.
    My BDC program can't afford any hard errors in the process. The execution stop abruptly for any hard error.
    How to change that Material shortage from hard error to soft error or any info message.
    Any ideas? any thing to do with material master or spro?
    Thanks
    Hari

    Hi
    You can make settings in SPRO, so that the material availability check will not restrict you to go further...
    follow the path:
    SPRO>Production->Shop floor control>Operations->Availability Check-->Scope of check
    There you will find the settings for order creation and release (1 & 2)..
    You have remove the restriction there.
    Regards
    Bala

  • Open letter to Crative Labs regarding lack of support for soft subtit

    Dear Creative Labs
    I'm a proud owner of a Creative Zen Vision W. In this day and age you either have to be a millionaire or truly love videos to buy one; I belong to the secound group.
    We need support for soft subtitles in Creative Zen Vision, Vision W, Vision:M and so forth. Simply put. It can be done with 0 lines of code in the firmware source, and you know it. Everyone are sick and tired of trying to find workarounds.
    We are videolovers; We are not audiophiles who needs an alternati've to iPod that happens to play footage of our kids practicing soccer and show pictures of our fishing tri
    ps.
    Treat us with some respect. People have been begging for soft subs support since the Vision was released in 2005, and you haven't done **bleep**.
    I tried to write a "down to earth" letter here, but you're truly pissing me off.
    Yours truly (untill I discover another portable media player that supports soft subs),
    Daniel AndersenMessage Edited by Otaku on 02-2-200703:3 PM

    Dear Creative Labs
    I'm a proud owner of a Creative Zen Vision W. In this day and age you either have to be a millionaire or truly love videos to buy one; I belong to the secound group.
    We need support for soft subtitles in Creative Zen Vision, Vision W, Vision:M and so forth. Simply put. It can be done with 0 lines of code in the firmware source, and you know it. Everyone are sick and tired of trying to find workarounds.
    We are videolovers; We are not audiophiles who needs an alternati've to iPod that happens to play footage of our kids practicing soccer and show pictures of our fishing tri
    ps.
    Treat us with some respect. People have been begging for soft subs support since the Vision was released in 2005, and you haven't done **bleep**.
    I tried to write a "down to earth" letter here, but you're truly pissing me off.
    Yours truly (untill I discover another portable media player that supports soft subs),
    Daniel AndersenMessage Edited by Otaku on 02-2-200703:3 PM

  • I tried to soft reset my ipod touch with the top button and the screen button.  it turned off and went to the blue screen with the apple.  now it won't do anything-it has stayed on that scren for 4 hours now.  does anyone know how i can fix this?

    i tried to soft reset my ipod touch with the top button and the screen button.  it turned off and then went to the blue screen with the apple like it should.  however, it now just stays on that screen.  it has a sort of clock looking thing at the bottom of the apple that does not move either.  it has stayed on this screen for over 4 hours.  i also can not hard reset it in itunes.  i am not really goood at this sort of thing.  does anyone have this problem or a possible solution?  thanks

    See Here for
    Frozen or unresponsive iPod touch
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Try this First... You will Not Lose Any Data...
    Turn the iPod Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Anyone else having reset loop issues with ipad or ipad mini after IOS 7.02 update ? Based on my research it looks like this release is a total disaster for a lot of users. Locking up phones and ipads. Hopefully 7.03 will fix this mess.

    My Ipad mini is in a constant reset loop since 7.02 upgrade. Did a full recover twice to Factory setting thru Itunes. That did not work. Any thoughts on this release and it's implications. Looks like many people are having the same issues.

    Hi gruhland,
    Thanks for your reply.  It sounds like your device is actually in a restart loop, which is different from the process of a soft reset.  Specifically, what I wanted you to try is this:
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If resetting does not break the restart loop, it sounds like a different direction may be warranted here. Due to the nature of your issue you may find more assistance by using another one of Apple's support resources:
    http://www.apple.com/support/contact/
    Take care,
    - Ari

  • How to install Oracle 10g Release 2 (10.2) for RHEL 5

    Hello Guys,
    I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
    Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
    My Machine is having 12GB RAM and it's 64bit machine.
    So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
    Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
    So please people help me out... i am really thankful to you guys .....
    Thanks ,
    ORACLE DBA P

    That also good idea man. thanks for your valuable advice.
    I have confusion here ...
    3. Changes to be made to Kernel parameters
    After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
    shmmax     2147483648
    shmmni     4096
    shmall     2097152
    shmmin     1
    semmsl     250
    semmns     32000
    semopm     100
    semmni     128
    file-max     65536
    ip_local_port_range     1024 65000
    rmem_default     1048576
    rmem_max     1048576
    wmem_default     262144
    wmem_max     262144
    We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
    kernel.shmmax = 2147483648
    kernel.shmall = 2097152
    kernel.shmmni=4096
    kernel.sem=250 32000 100 128
    fs.file-max=65536
    net.ipv4.ip_local_port_range=1024 65000
    net.core.rmem_default=1048576
    net.core.rmem_max=1048576
    net.core.wmem_default=262144
    net.core.wmem_max=262144
    Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
    ----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
    1. Add the following lines to /etc/security/limits.conf file
    oracle soft nproc 2047
    oracle hard nproc 16384
    oracle soft nofile 1024
    oracle hard nofile 65536
    2. Add the following lines to /etc/pam.d/login file
    session required /lib/security/pam_limits.so
    session required pam_limits.so
    3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
    if [ $USER = "oracle" ]; then
    if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
    else
    ulimit -u 16384 -n 65536
    fi
    fi
    Question: this things also i need to change ?

  • Adobe Audition CS6 (5.0.1) update patch released

    UPDATE:  A new 5.0.1 update build has been made available as of July 20, 2012, due to an issue discovered in the Dynamics Processing effect.  If you previously updated Adobe Audition CS6, please visit the links below and install the new update.  This update is not available via Adobe Update Manager and must be downloaded via the website.
    Today we released an update to address several bugs in Audition CS6. Many were minor workflow issues, but a few could cause Audition to crash under certain circumstances.
    Download the patch installer directly from: 
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5419
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5418
    bugs fixed in Adobe Audition CS6 5.0.1 update:
    APE files with metadata inserted by other editors cause Audition to crash (Windows)
    If previous session directory no longer exists, Audition leaves the Folder Location field empty
    Multitrack fades no longer respect the fade type preference.  (Worked in CS5.5)
    Audition may crash when users choose to create unique copies of selected MT regions
    Playback stutters when creating a unique copy of a clip while right-click dragging
    Channel Mix settings not honored on export when not exposed in dialog
    EUCON Soft Key set contains keys that do nothing
    Session Tempo broken on systems using commas instead of decimal points
    Bounce to New Track > Selected Track bounces AFTER passing through track output
    If a favorite was recorded on subset of channels, the favorite will fail if those channels are disabled
    Sending a stereo bus side-chained to a mono track may crash the application
    UAD-2 plug-ins missing from Windows Effects menu
    Audition may crash on launch when CoolType encounters certain installed fonts (Mac)

    I'm really happy to see this update out, but I haven't been able to install it on my Mac yet.
    The Updates item in the help menu is greyed out for me. When I try running the installer from the direct download it says 'Updates have been suppressed by your administrator.'
    I can't imagine that I would have disabled updates.
    Any advice?
    Joseph

  • Soft and hard reset for time machine doesn't seem to work does anyone have suggestions?

    I have tried to use a soft reset according to the language on the apple site by using a pin to push the button for a second even up to a minute but it doesn't seem to work.   Does anyone have any suggestions for either a hard or soft reset?  I did get a new  router Netgear wireless extreme thus I'm only using the time capsule portion instead of the wireless router. 

    Tell us what happens when you press in the reset.. you should feel the switch click.. but don't press too hard or you will break the plastic lever arm.
    Connect the TC directly to the Mac by ethernet and open airport utility.
    Can it find the TC.. if so you can do a factory reset from the utility instead. If it cannot find it.. try again with the reset.. you need to hold in reset for about 10-15 sec. The front led will begin to flash rapidly. Release it at that point.

  • My iphone was stolen and my mother gave me her 3GS, however she never updated the soft ware. It is on 3.13 and will not update to IOS 5.  Help!

    My iphone was stolen and my mother gave me her 3GS, however she never updated the soft ware. It is on 3.13 and will not update to IOS 5.  Help!

    How about the issues with 3.1.3 on the 3GS?
    3.1.3 battery problem
    OS 3.1.3 battery issues
    3.1.3 upgrade - shortened battery life?
    Battery life cut after 3.1.3 update on iPhone 3G
    3.1.3 Firmware is a battery killer - how do I back out this upgrade?
    Some users have problems with any release. iOS 5 is no different, not better, not worse.

  • Workflow for P.O release process.

    Hi Guys,
    As per the one of the thread I have done setting as per the below. Ref last 10 line for the details of the problem.
    Hi,
    1) Work flow: - Work flow is standard functionality of SAP.
    I give one example to u.
    In the case of purchase order creation, First purchase person create purchase order, then first purchase order approved by purchase head and then auditor approved purchase order on print of purchase order.
    With work flow you can send soft copy of purchase order to both person purchase head and auditor to approve your purchase order.
    Due to this your process for purchase material is faster then manual process.
    2) You can implement work flow in purchase order release strategy with below mention detail.
    For mail facility, you need to activate workflow for PO release procedure;
    *Go to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders *
    Define Release Procedure for Purchase Orders > Release Codes >
    here assign Workflow indicator as "1" against each Release Code
    Now come to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders >
    Define Release Procedure for Purchase Orders > Workflow >
    Here against each release code assign OT as US and respective User ID's for Release Codes.
    Now Go to OOCU > here under MM, go to MM-PUR,
    Now click on "activate event linking"
    Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
    Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
    Same way and click on "Assign agents" and proceed all above steps.
    Now create a PO and check the SBWP for SAP Mail of respective Users
    This was the details given by the thread but now I have completed till
    OOCU > here under MM, go to MM-PUR,
    Now click on "activate event linking"
    Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
    Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
    For proceeding futher as said in the above procedure. I am getting User ID inside WS20000075 when I click on Assign Agents but I am not getting the details button to repeate the step as said.
    Please let me know whatever I have done is enough to get the mail or is there any thing else need to be done.
    Thanks
    Dhanu

    Hi,
    release code and release group should be assigned in the authorization object for the approving authorities.
    apart from this the settings looks ok and it will work

Maybe you are looking for