This event is displayed in local time, but was created in Brisbane (+10)

I've seen similar errors some time ago but never had the issue myself. Now suddenly events created on the devices (Q10 and Z10) get this notification when opening the entry. The information itself, start time - end time, is correct and will also sync correctly to the calendar but it is annoying and users complain about it. Will this bug ever be fixed for good? It seems to keep coming back for one time zone at the time..
Z10 - SW Release 10.2.1.2941 / OS Version 10.2.1.3175

HI,
i have the same problem. Every entry entered in Q10, correct setting of time zone.
After the sync the time zone is forgotten. Every entry, entered in BES have to be corrected after sync.
Several versions of lotus traveler - still the same problem.
I cannot understand, that I cannot find a fix from blackberry for more than 6 month.
I've hope on the new firmware / Bes version 10.3.
Q10 running on 10.2.2.984

Similar Messages

Within the last hour, I noticed that my older MacBook Pro, while I was playing it in iTunes, lost contrast on the screen. I am sorry, but I did not take exact notes on this event. Around the same time, I did do a back up, uploaded software, etc.

Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen. I am sorry, but I did not take exact notes on this event. Around the same time, I did do a back up, uploaded Apple software, etc.
I'm using two MacPros simultaniously, the old one for iTunes, and the new one for the other things. My new one has no problems, so am wondering if there is an easy way to correct the older MacPro's contrast problems. The computer is over three years old, and I'm wondering also if this failure is an aging sign. (I also have other problems, such as a noisy DVD drive, which is part of the reason I bought a new MacBook Pro.)

Is the older MBP a pre-Unibody model from early 2008? If so, it could be having this problem:
http://support.apple.com/kb/ts2377
If so, you would be entitled to a free repair.
The lost contrast could be considered distorted video.
Do you have an external monitor? If the external shows the same lost contrast, the graphics chip is likely the culprit. If the external is OK, then you probably have an issue with the built in display or possibly with its connections.
You may also want to check in Universal Access to see if the contrast bar is set in its normal position (all the way to the left).
Apple has a special test they can run to diagnose the NVIDIA issue, so if you have access to an Apple Store, make an appointment at the genius bar to have it run.
Good luck!

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

I know this has been posted a few times but, High Pitch noises!!!!!!!!!

I keep getting wierd high pitch noises from the MOBO, I have tried to push in the MSI plate on the NB but it didn't stop the noise. But what I have found out stops it is kind of wierd.
If I go into any Windows Explorer window and right click on certain icons, (i.e. C: Hard Drive, the nVidia Ethernet Adapter, or my DVD-RW) the noise stops suddenly, but if I click off of the right click menu the noise starts back up again. I don't get it? Also if I use my mouse wheel and scrol up and down rapidly, the sound stops while I am scrolling, but once I stop it comes back.
I know that this has been posted a few times, but I still haven't found any way to stop the noise other than the ways above. So if anyone has/had the same problem and knows how to fix it, I would really appreciate it if you would share.
EDIT: I have also tried to return my CPU to stock speeds but there is still a noise.

Im sure this noise, is the copper coils around the components near the cpu socket.. its a known problem on MSI boards, where they start to resernate / vibrate.
I've seen two solutions, neither have i tried, as I don't have the problem, but they are pretty harmless.
one is to apply a small amount of superglue over the copper coils, allow to set and switch back on,, or a safer way (in my opinion) is to use some wax (or electical sealing wax).
see this post
High Pitch Sound Identified! Read more...

Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event?? It asks "for all events or only this event" if i change the time. But it changes ALL events when i try and switch calendars. Any help??

I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar. I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts". But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days. I want to change that in my calendar. When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event. no problem....just this single event. but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event. can anyone help with this??? am i doing something wrong? is there a way to do this or not with the new iCal program??? i used to do this and never had any problems. Thank you!

You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN

Is there a way to display the actual time footage was shot?

I have two cameras I used for footage and they are not continuous so I need to find an easy way to quickly get the footage close to where they need to align. It would be great if there was a way to display that actual time of day in hours/minutes/seconds based on the cameras clock instead of just timecode, which doesn't give my much of a reference of the camera's time. Does anyone know of a way to display camera time?

There is a somewhat tedious workaround that will help (perhaps, since I don't know what your footage is).
Load in all the clips you plan to use in your edit. Select them one at a time and click File\Timecode and type in your "time of day" clock timecode and Set at Beginning. Click OK.
This will then change the Media Start from 00:00:00:00 for every clip to whatever you type in.
If anyone finds, or knows of, a way to do this automatically, I'd be very interested to hear about it!
HTH,

Report execution time should displayed in Local Time

Hi,
I have a query related to the Report execution time.
Our SAP Servers are available in US. The Servers are configured in US Time.
We have developed a Z report and used SY-UZEIT to display the Report Run Time.
we also have a plant in India.
When we execute this report for India Plant we are getting the execution run time for US.
But we need to get the run time in India Time.
Please help ASAP.
Regards,
Shankar

Hi Shankaran,
In your Z report, give a condition to check if the Plant is in India. If it is in india, then get SY-UZEIT and add the time difference to get IST.
Display this time on your report.
For implementing this, you will have to convert the Date and Time into Timestamp (use FM "LXHME_TIMESTAMP_CONVERT_INTO"), add the Time to this Time stamp (use FM "TIMESTAMP_DURATION_ADD" and convert it back to Date and Time (use FM "LXHME_TIMESTAMP_CONVERT_FROM").
Reward points if useful.
regards,
Raj
Message was edited by: Rajagopal G

I know this has been asked a million times but I just don't understand?

I have photoshop elements 7 and Nikon D300. When I take pictures with my camera the color is fine in the live view screen. When I download them to Nikon and to "My Pictures" and look at them the color is fine. When I email them the color is fine. As soon as I put them in Photoshop Elements 7 they are a few shades lighter. It is not the monitor because the color is the way it is suppose to be when the photo is in any other program. I don't want to print them off my printer, I just find it hard to edit the photo in any way when it is so much lighter than it is if I just look at it in my picture files. How can i adjust just the way the photos look on element so they will match my email, my picture file and my camera?

Two possibilities that could explain your symptoms:
1. You have your camera set to use the Adobe RGB color space, and you're viewing the photos in the Organizer. There is a known bug where the Organizer incorrectly shows the colors of such photos. You can quickly test whether this is your problem by opening a problem photo in the full Editor -- if the colors look different than in the Organizer, then you're encountering this bug. A workaround is to set your camera to use the sRGB color space.
2. You have a color profile associated with your display in Windows that was probably installed by software provided by your display's manufacturer. PSE uses such profiles to more accurrately display colors. But the built-in profiles provided by manufacturers may not be very accurate. If you're satisfied with the colors of your photos when viewed outside of PSE, then disassocate the profile from the display:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Colors_are_wrong

HT4053 does find my iphone display the local time on the search device or the iPhone

When my iPhone has been found using "find my iPhone" is the time displayed local to the the phone or the searching device?

Does iCloud or find my phone have a track of imei numbers?
No. There is no way you can locate the phone by IMEI number using any means.
Did you report the theft to your carrier? They have your IMEI number. If the thief is stupid enough to be using your phone on your account, the police can locate it.
What to do if your iOS device is lost or stolen
Reporting a lost or stolen Apple product

So I have an I Pad that will not charge. This is the second time that this situation has occurred the first time it was covered under warranty (But not this time). So they offered me a new old one for $250.00 and 90 day warranty. Seems like the life if th

Any thoughts about my second go around with an I pad that will not charge. This is second go around and I'm wondering if I should repalce or opt out and go different route ???? Can not imagin that Apple could give the type of support I'm recieving and continue?? The first one was under warranty not so lucky this time.

Go to the Apple Store and try a different charger & cable.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

RE:idvd I know this has come up a gazillion times but...

I'm running OS X 10.7.5 Lion. I bought a new ilfe08, installed idvd and updated it. The themes just wont load, instead I'm stuck with the eternal blue swirl. Can't find some of the stuff other posts say is in various libraries. I don't want to mess things up - just want my idvd! Help!

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Using MacBook Pro running 10.7, how do I copy a DVD that is NOT commercially created, but was created on a Mac using IDVD?

Having a DVD that I created on a Mac, how do I make additional copies? I know from reading some instructions, to use the Disk Utility, but from there I don't see the inserted DVD to be copied on the left side, as the instructions say for step #2. Please help

Hello wrinkle2,
Thank you for using Apple Support Communities.
The following article provides information on duplicating a DVD in Disk Utility.
Disk Utility 12.x: Duplicate a disk, CD, or DVD
Regards,
Jeff D.

HT5772 How do you delete a movie from a local computer without deleting it from the library? This should be such a simple procedure, but it's not. And while we're at it, why is iTunes NOT one of the dropdown product choices?

All Apple support says about deleting movies from a computer is that you "should" be able to re-download it if you live in the right area. Well, I'm in the U.S.A. and just deleted one of the movie extra features exactly as described in the support directions. According to Apple I should be able to re-download this from the cloud at any time, but now I no longer even see the title listed. That's why I wanted to test their support statements with a Movie Extra instedad of a real movie. This should be the simplest of tasks to manage, yet they make it extremely difficult. Why? I own the movies and I want them to stay in my iTunes library basically forever. Makes sense, right? But, I only have so much room on my laptop to store movies that I want to have with me on long trips, etc. So if I only have the space to store 3 or 4 movies on the disk, shouldn't I have the ability to every once in a while delete one of those movies from my local computer ONLY, NOT my library, so that I can download a different movie? Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library. So why does support say you can download again any time from the cloud then? The worse part is, the calamity doesnt stop there. Wait until you see the message you actually get once you say that yes, you do want to delete the movie (but only because you assume that you really can download it again sometime). Here is the exact 2 messages you get from Apple, in the same popup box.
Do you want to move the selected movie to the Recycle Bin, or keep it in the iTunes Media Folder?
Only files in the iTunes Media Folder will be moved to the Recycle Bin.
[Cancel] [Move to the Recycle Bin] [Keep File]
Is that the most confusing popup or what? Who develops this kind of software?!?!?!
I have tried it both ways and the only difference is that the file shows up in the Recycle Bin or doesn't. But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud. Better hey, if I clicked "Keep File", where is it? I can't see it anywhere, so where is it kept and what can I actually do with it?
I have to be honest, I love my iPhone and some of the neat features, but when it comes to iTunes, I have never seen a more difficult piece of software to use in my life... and I'm a software developer. Your Support documentation is actually more confusing than the softwae itself, it's almost as if you don't want people to use the software, just simply buy stuff and listen/watch it, but nothing else. Seriously, this is the most cumbersome, unfriendly piece of software I've ever seen. What does it say about Apple iTunes when everyone has to google solutions for how to do something rather than using Apple support documentation.
Seriously disappointed in Apple iTunes and it's never really gotten any better over time. This is one of the primary reasons I have never moved all of my recording studios and office operations over to an Apple platform. Hardware and phones are awesome, but your software is either grossly incompetent or intentionally designed to make it all but impossible to use. Either way, it's worthless to me. We're talking about software that does nothing else but manage media that I already own on multiple devices. That should be one of the simplest things in the world to do. Sad... very sad.
While we're at it.... why isn't iTunes listed on the product dropdown below? Maybe it's not even considered a product, which would explain it's goofiness I guess.

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

I used to be able to add an event in the past on iCal, but can't now. The event immediately deletes itself. Is anyone else having this problem?

I use my calendar to keep track of things and sometimes I like to add past events so they are on my calendar. Starting today, iCal hasn't been letting me do that and it's very frustrating!

Hi! I was having the same problem too- was entering an event from 2 months ago but it would then disappear. I tried entering several events, some of them multiple times but they kept disappearing. Finally figured it out though: go to Settings: Mail, Contacts, Calendar. Scroll to calendar, then You have the option of adjusting the sync time of your calendar. Mine was set to "1 Month" so everything older than that was disappearing. I changed it to "6 Months" and when I returned to the calendar all events I previously entered that had seemingly disappeared, magically reappeared! Even in the multiple forms I had entered them so I deleted the duplicates! Good Luck!

This event is displayed in local time, but was created in Brisbane (+10)

Similar Messages

Maybe you are looking for