Software 10.2.1.2941

hi, after i update my BB Z30 to latest software 10.2.1.2941, battery standby time become short. what happen to new update??? please help

John_Clark wrote:
If you're experiencing problems here's what I performing a Securty Wipe of the device. This will wipe all your personal data from the phone.
To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
http://www.blackberry.com/btsc/KB33591
Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
Did you not read this part of my post? I can help you but only if you follow instructions. If you choose not to then I can't guarantee any results. I wanted you to wipe ALL data from the device (only after making a full backup, of course) and then leave the device empty of your data to see if your original problem persisted.
Is your media stored on a media card?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Software 10.2.1.2941. Fast discharge a battery

Hi!
I update software 3 days ago (10.2.1.2941) After this update, if I use wifi then very fast discharge a battery. More fast then before.

Hi Minetolog.,
I'd faced same issue on Z30. I removed android market and apps installed. I removed my sim card n activated flight services. Did a security wipe. Now everything is on track
Proudful & loyal Blackberry supporter ..
throwing mud at others makes you happy now but in future you might end up in sinking in mud lake.. wake up b4 it happens. Be secure
10.3.0.296

Problems in my q10

Please ...
How i change my screen saver on my BlackBerry Q10 ??
" my screen saver not my screen lock " this option is n't exist now in "software 10.2.1.2941 "
Thank u ...

Do you mean Set a picture as your wallpaper?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Mobile Data not working after 10.2.1.2941 update

I updated my BB Z 10 software to 10.2.1.2941 last night. It take a long and was stucked on Blackberry Logo for 3 hours after restart. I pressed Power button for 10 seconds and it got started after that. But now i am facing a strange problem my previously installed applications are behaving normal but when i install a new app from bb world it do not detect a mobile data while they works normal on on wi-fi. What may be the reason??? Help me guys...

Try removing your SIM card, reinsert, and power up again?
Don't turn the device off first.. leave it powered on, remove the battery , remove and reinsert the SIM. Replace battery.
Also, give me an idea of what application(s) you are seeing this the mobile data fail on?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry 10 OS software upgrade issues

Please help!!!...hello everyone...I'm having issues with ma Z10...ever since I upgraded to the 10.2.1.2941 OS I've not been able to connect with my 3G network...anytime I try to connect to the 3G network all it says is *emergency calls only*....the issue started right after I upgraded my OS...please what do I do?
Solved!
Go to Solution.

Hello crownmx01
It is always recommended to troubleshoot software/hardware/network issues with reset BlackBerry phones first.
KB02141 Reset a BlackBerry smartphone
If the problem persist, then you need to make a call your mobile service provider to consult this network issue.
Good luck and let us know.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Q10 Software Upgrade Interupted

Hi,
While I was upadting the Blackberry OS Software from 10.1.0.273 to 10.2.1.2941, it showed a download of 2gb and when the downloading was completed, it started installing. At 99% of installing, an error message occured saying that SoftwareUpgrade is interupted. I tried updating for 4 to 5 times, but always the same error is displayed.
Kindly please give me the solution for this asap.
I have bought the handset yesterday itself only.

Use the instructions in the first post of the thread below.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...
When it gets to the Country and Carrier codes to input into Sachesi use the data from the first post in the following thread (instead of what I have listed in my thread above):
http://forums.crackberry.com/bb10-leaked-beta-os-f395/sachesi-codes-os-downloads-920390/
When you're all done do a Security Wipe on the device to delete the OTA download you did originally.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Blackberry Z10 Software Update problem?? HELP!! PLEASE!!! :'(

I received the blackberry software update about a month ago, 10.2.1.2941, i'm currently at 10.2.1.2102 system softwate, I keep ignoring the update because my internet connection is bad, but now, I can't update!!! When I click "check for updates", it shows "you have the latest software", what happened with my z10?? Help me!

You can manually download it here....
http://us.blackberry.com/software/blackberry-10-os.html?d=BB10Touch&o=10

Issue of OS 10.2.1.2941

Hi guys, last week I received auto notification to update software to 10.2.1.2941, I did via wifi. From that day to now I am facing a series of issue, my mobile battery not gonna be charged more than 70% BBM, what's app and message application got stuck. I wiped out my whole data , restart many times. Consistently I ve been facing this issue. I am not much good in technology. I Just want to fix this issue, I am unable to figure out. Is there any link available if I want to degrade my software into former one. Can somebody help me out? God bless you.
Regards,
Sadia
Solved!
Go to Solution.

Hi,
You can use autoloader, look here but keep in mind it will destroy all You personal data like You got new device and You'll can't use backup after OS downgrade, so You should to use third-part apps to save You critical data (contacts, media etc.) and restore it after autoloader apply. I suggest You Enpass for password backup and Fire Chest Backup for the rest but it's Your deal what You want to use.

Software Upgrade Interupted

Hi,
While I was upadting the Blackberry OS Software from 10.1.0.273 to 10.2.1.2941, it showed a download of 2gb and when the downloading was completed, it started installing. At 99% of installing, an error message occured saying that Software Upgrade is interupted. I tried updating for 4 to 5 times, but always the same error is displayed.
Kindly please give me the solution for this asap.
I have bought the handset yesterday itself only.

Please only post your questions once. I already answered you here:
http://supportforums.blackberry.com/t5/BlackBerry-Q10/Q10-Software-Upgrade-Interupted/m-p/2905266
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

Adobe Cloud Which Software does it come with

With Adobe Cloud Which Software or apps does it come with?

All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

Step-by-Step Help Needed for Deploying Some Adobe Software

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

How to find licence number to activate software ?

I have just bought the Adobe creative Cloud for enterprise.
I had download the creative cloud and now each software is asking for a licence number but I can't find it.
And I have no acces to Adobe Licensing website to get one.
Can you help me?
Thanks.

Hi Berengere,
Welcome on the Adobe Forums!
There is no serial number needed to activate the Creative Cloud, the Adobe ID will be used to activate the product.
As the product mentioned is Cloud for Enterprise, you have to verify first if your Adobe ID (email address) has been assigned to the user rights.
You will find more information in the following link: http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
If you have already proceeded the the previous steps, please try the steps below then:
1. Clean Up cached user login information
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the opm.db file.
Launch Creative Cloud.
2. Reset the Hosts file
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Please, let us know how it goes.
Thank you.
Arnaud.

Software 10.2.1.2941

Similar Messages

Maybe you are looking for