Software all out of whack.

Here is where I am at - Im not good with this stuff so treat me like I am 6 and I should be able to figure it out.
I updated my iphone to Ios 7.0.4 via the phones update option under settings.
Once downloaded, my phone keeps saying I have to connect to itunes to get push notifications for my apps (facebook, tinder, all that stuff)...
Tried to connect to Itunes, it tells me my iphone cannot be used because it requires itunes 11.1 or later....
downloaded Itunes 11, tried to install. cancels itself and says I require OSX 10.6.8 or later...
Try to update my OSX and it keeps telling me I have the latest version @ OSX 10.5.8.
In the meantime, My Imessage isnt working, and I cant recieve any app notifications because I am not "synced" with Itunes.
I cannot find anywhere to download the latest osx, what am I missing here???

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Similar Messages

I cannot connect to the internet. I think I have my settings all out of whack now and need to get them back to the way they were when it was working. (I know my wireless router is working because my Dell has no problem connecting to the internet.)

I cannot connect to the internet on my iMac through my wireless router. I think I screwed up the settings and need to reset them. I know the router is working because I can access the internet on my Dell laptop which is located right next to my Mac.

On your iMac try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Trying to install autofills, now firefox add-ons are all out of whack. think i might need to uninstall and re-install add-onns?

I had been trying to add on autofills in firefox, and have managed to throw EVERYTHING out of kilter, and I don't know enough about the Firefox add-ons feature to know where to begin to repair it to normal conditions. Suffice to say that the autofill add on feature does not work at all.

Which autofill extension did you install?
Did you check for reported issues in the comments on its Add-on page?
If the extension isn't working properly then you need to uninstall this extension and possibly look for another extension.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Artboards in Illus CS4 all out of whack

Good Monday,
before today, i was working on a 2 artboard postcard layout, and when i came in this morning, somehow, i must have done something that deleted one of the artboard areas - so now when i print my file, it is as if the artboard centered itself between the two real pieces of artwork and i am unable to get back to 2 artboards. i can see the red line outlining the artboard and it is smack dab in the middle of the art, which prints out as one page, half of one of the "artboards" on one side, and the other half next to it.
i hope that makes sense. i need to get the artboards back in alignment so that i can print my file.
thanks,
Gwen

ah i found my answer through Adobe's help system. dragging the dashed line is how to get them back into place. hope this can help someone else too!
Gwen

My cursors for Photoshop CC are all out of whack!!!

First off, when I'm using the brush tool and I hold command + option to resize my brush, the cursor will immediately change to the eye dropper. If I hit the spacebar it will STAY as the hand cursor, even if I press the B key. Pressing the command key will give me the arrow key, and pressing option will give me the eye dropper. But the cursor will NEVER change back to the brush cursor. It stays as one of the cursors mentioned above. Painting with an arrow or hand cursor is getting very frustrating.
I've gone through all of the cursor preferences, and have even reset PS preferences by holding command + option + shift when starting the application. Nothing has helped.
This is such a weird bug, and I can't seem to find any other instances of it anywhere. It's not like the crosshair problem because you have caps lock turned on...
Can anyone shed some light on this!???
Running CC 2014 (full suite) on an iMac 27' with Mavericks OS.

Have you updated mavericks to 10.9.4?
You have the latest driver from Wacom?
Drivers | Wacom
Does it happen with both the mouse and tablet?
(if you disconnect the tablet and use just the mouse is there any difference)

Updated to 7.0.6 on my iPhone 5s and now my phone is all out of whack. It won't sync the new playlists I added after the update though when it's plugged into iTunes it says it's synced. Help please!

So I updated my iPhone 5s to version 7.0.6 yesterday, and now my iPhone music isn't working properly. It won't sync the playlists that I added after the update though when it's plugged in on iTunes it says that the music is synced. When I select a song in a playlist on the phone it shuffles through the playlists for like 3 seconds and picks a totally different song to play. I tried reinstalling iTunes, I tried restoring the iPhone, is it just a bug with the update? Nothing works. Any solutions are welcome.

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

The colors on the screen of my iPod nano are all out of whack. What can I do to fix this?

It is a 3G and it shows rainbow colors. I've tried resetting it twice, but it stays the same. When I touch the screen, it shows original colors in some areas.

Sounds like a damaged or loose ribben cable or LCD screen. You'll need to have the iPod serviced either by Apple or a third party service center in order to resolve the issue.
B-rock

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

Your file is most likely toast, but still:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Satellite A660 - 3D DVD software runs out of date or is secretly altered

Whats going on; why do I get lynched to pay an additional $59 for software to make my Satellite 3D work?
Ok.
This probably sounds nuts; but my Toshiba Blu-Ray DVD software seems to have a DVD/Blu-ray prevention program in it. Preventing 3D and smaller issues.
It has been out of whack since I updated the software on the Toshiba site and when I updated the nVidia GTS 350M drivers.
That may be co-incidental to the problems which began in previous month/s; as I don`t always play discs on this laptop; so pinning a date when it went pear-shaped is harder.
But, after going through a nightmare (of not working on DVD or Blu-Ray on half my discs for months now); I installed the latest TRIAL ($59) Corel WinDVD 11 Pro player and everything (including 3D) works perfect again. But for 30 days only; until/unless I`m robbed of $59 additional that is.
The problem is/was;-
3D only worked on half of my Blu-Ray 3D discs using pre-installed (and later updated) Toshiba COREL WinDVD media PLAYER. Sometimes it only played 3D side by side; 2 images. No 3D. Some Blu-Ray 3D discs were fine ODDLY. Region code not an issue.
Toshiba DVD 3D player/upconvertor program was the worst (not the SD version, I dont use).
Toshiba (HD) 3D player would not recognise half of my Blu-ray 3D laptop disc drive content. "DVD drive not recognised" error message.
Toshiba DVD player itself would not upconvert any normal DVD to 3D.
Toshiba DVD player would only play NORMAL 2D when running upconvert (no 3D).
Toshiba DVD player would only play HALF-SPEED DVD when upconvert was disabled. When trying to play a DVD in normal 2D mode.
All settings were tried and altered to fix the problem around a thousand times.
Software uninstalled and re-booted and re-installed a dozen times each.
I also had to un-install the software and re-boot and re-install the following;-
nVidia graphics driver (from nVidia sites own 295.73 and re-install Update to the `older` nVidia Toshiba 260.51 driver).
I used to be able to upconvert DVDs to 3D using this laptop; so it did work many months ago; but now that has all stopped for months now.
Its a pain as I have un-installed everything and re-installed all the relevant software from the Toshiba home page; but no solution for the problem without getting mugged an extra $59.
I hate computers for the ten-thousandth time.
1 minute Ramble:-
Its the last Microsoft product I will ever buy (Windows Ultimate rubbish [had to buy a new A3 color lazer printer as no Win 7 drivers for my existing laser printer]).
SAMSUNG (3D internet TV) products from now on. No computers for ten years. Until the rats get it right and stop experimenting on my wallet. $10,000 on PC products in the past 5 years and still being able to do simple things like watch a 3D movie is a hit and miss affair.
I`m rambling....because a hundred hours reading on how to get it working again has scrambled my head.
Spec
Toshiba A660 3D laptop. Satellite.
Windows 7 Ultimate. Updated.
Intel i7 1.73Ghz
Graphics is GTS 350M
4GB Ram (8-gig upgrade on order)
Spare 550GB hard-drive space.
Toshiba site; Bios updated.
Toshiba own DVD 3D player (doesn't cut the mustard) Version 4.00.1.08
Toshiba Corel WinDVD 3D player (doesn't cut the mustard) Version 10.0.5.822
The Nvidia graphics always works fine on the test background page; which makes me think software; but all the relavant software has been updated. Re-installed and re-tried a hundred times with different settings.
I thought the discs were the problem. But 50 DVDs not working in 3D up-converting, or faulty all by themselves? And half of my 3D Blu-Ray collection?
I wondered if these these problems are deeper than this one system. Whether there was a systemic problem somewhere (besides blaming the buyer end-user).
Toshiba assist line in one call was a guy who knew far less than me and had to ask someone advice for every single part of the call. 2 hours to tell me to re-install the software in a long, slow, bit-by-bit way, eventually. We done everything they can do to help. Now they seem to blame the discs and don`t have any answer.
Microsoft x64 Ultimate says its roger all to do with them on their helpline/e-mail assist.
I tried nVidia to no avail;
Any ideas; do I bite the bullet and everyone eventually be forced bit by bit to pay for $59 software to get the thing working.
Whats the beef?

Hi
You wrote really long story :) anyway this is an user to user community Im not sure if I could clarify all these issue for you but I would try to share my knowledge with you.
But firstly it would be really interesting to know what Satellite A660-xxx do you have exactly?
You said that you have installed the Win 7 ultimate.
According to the Toshiba page the notebook was preinstalled with Windows Home Premium. The preinstalled WinDVD was a full version (not trial) and you have not to pay for this software. In my case I have not to pay for any software (except MS Office :) )
you said also:
> I installed the latest TRIAL ($59) Corel WinDVD 11 Pro player and everything (including 3D) works perfect again. But for 30 days only; until/unless I`m robbed of $59 additional that is.
So it seems that you dont use the preinstalled Win DVD but you have installed other version which was not preinstalledso you have to purchase such version if you want to use a full version of any software which is not part of Toshiba image.
> 3D only worked on half of my Blu-Ray 3D discs using pre-installed (and later updated) Toshiba COREL WinDVD media PLAYER. Sometimes it only played 3D side by side; 2 images. No 3D. Some Blu-Ray 3D discs were fine ODDLY. Region code not an issue.
Take a look into this Toshiba document:
+3D video content not displayed in 3D when using the Toshiba Blu-ray Disc Player+
http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm
>Toshiba DVD 3D player/upconvertor program was the worst (not the SD version, I dont use). Toshiba (HD) 3D player would not recognise half of my Blu-ray 3D laptop disc drive content. "DVD drive not recognised" error message. Toshiba DVD player itself would not upconvert any normal DVD to 3D. Toshiba DVD player would only play NORMAL 2D when running upconvert (no 3D). Toshiba DVD player would only play HALF-SPEED DVD when upconvert was disabled. When trying to play a DVD in normal 2D mode.
Found some info regarding the Toshiba player which should provide answers to most mentioned issues:
+Toshiba DVD Player Troubleshooting+
http://aps2.toshiba-tro.de/kb0/TSD17036L0000R01.htm
+Toshiba DVD Player Settings+
http://aps2.toshiba-tro.de/kb0/TSB17036M0000R01.htm
+Important Information for Using the Toshiba DVD Player+
http://aps2.toshiba-tro.de/kb0/TSB17036N0000R01.htm
+Useful information for playing DVDs with the Toshiba DVD Player+
http://aps2.toshiba-tro.de/kb0/TSB17036O0000R01.htm

Photos syncing from folder to iPhone all out of order?

I have 2 folders synced to my iPhone 4 photo app.
They were previous camera rolls before I set up my phone as a new device. They are all named in order and taken in order, for example IMG_001.jpg was my first picture in my old camera roll. IMG_822.jpg was the last photo taken before I did the backup, and is the last in the folder.
The folder I am syncing from on my windows computer displays all of the pictures by filename (and because of that, by date) but when syncing with iTunes they end up on the phone ALL out of order. I can't find any rhyme or reason to how they are displaying. Most of the earlier photos show up at the beginning like they should, and the last at the bottom of the scroll appear to be mostly right, but then it's completely random from there.
I've tried unsyncing them, removing them, and then adding them back again and nothing seems to work. I've even tried renaming the IMG_xxx numbers to different things and they still appear to sync in the same random order.
Am I doing something wrong, or is this a huge bug for someone with OCD like me? lol

This is highly annoying.
I have probably 15-20 Smart Albums in iPhoto 8.1.2 in OS10.6.4 that are syncing to iOS4.0
On the old software, my Smart Albums for photos would show up AS the smart albums I created. Now they show up in the iPhone one giant mess called "Photo Library".
I can view photos broken up under "Events" on the iPhone by specific dates, but the dates don't tell me what the name of the event was, and some Smart Albums had multiple dates grouped together in one Smart Album and I don't really want them broken out separately by date. I want them organized how I organized them...
In short, I want my photos grouped the way I have explicitly grouped them. It used to work, it doesn't now.
Since iOS4.0 I am also getting sync errors all the time in iTunes. "iPhone cannot be synced because the required file cannot be found." WHICH FILE??? tell me and I will delete it...
I've rebuilt the entire database in iPhoto (took 4 hours). I've scanned iTunes and removed all broken links and duplicate files. I've scanned the hard drive with the disk tool. I've emptied the iPhone and reinstalled iOS4 on it 5 times. I've turned syncing off for all non-essential applications and stuff I don't actually sync like voice memos. Same problem.
I think I want my iOS 3 back. I don't really like multitasking anyway, always having to turn off applications for the one or two times in a million where task switching if helpful...
Ugh....

"Some of your quicktime software is out of date" Message

Hi,
I have a problem with quicktime for which I would like advice. The symptom is that each time quicktime is loaded or accessed, there is a pop-up message box which says,"Some of your quicktime software is out of date. You can fix this problem by updating to the latest version." There's a cancel button, which I use nearly every time, and a "Do It Now" button. Note that I am running the latest version of quicktime.
When I use the "Do It Now" button, I get an error message pop-up which says,"Information obtained from the Quicktime server is invalid. Please try again later." I don't use quicktime stand alone for anything, so I don't really know if it's working OK. It seems to be, but I've not done a thorough testing. The dominant symptom is in iTunes, where I experience lock-ups. I spoke with an Apple technical support person for a while about it, and we (re)did the compulsory uninstall, reinstall stuff to no avail.
The Apple guy pointed me to an Apple website detailing some methods to fix various problems with iTunes/quicktime. (http://docs.info.apple.com/article.html?artnum=93976) I have tried everything there. One of the things was an experiment to try to detect interactions with other programs. Using MSCONFIG, I did a custom start-up which enabled nothing but quicktime. No change. I have removed (ctrl-panel->add/remove programs...) many of the programs which were installed. No change.
Questions/Comments?
Thanks for any info,
jimmBob

I just got off the phone with an Apple technician, and we solved the error problem. Basically we just went through my whole computer searching for all quicktime and iTunes files that were left behind. Be sure to check your C: > Windows > System32 folder for ANY and ALL QuickTime files. The files we found that caused the error were hidden in a filed titled "quicktime" in the System32 folder. Make sure you delete it, uninstall all iTunes and QuickTime programs (including Apple Software Update and Apple Mobile Device Support) from the Control Panel, and reinstall the latest files for iTunes and QuickTime and the error should go away.
Hope this helps!

Video Levels out of whack

Can anyone clue me in as to why my levels look fine in the FCP waveform but not on my external waveform? They are way out of whack; whites at 120 IRE and blacks at -5 IRE, when they are in limits on the FCP waveform. Idiot check has been checked - the external WF is setup on the FCP bars to the proper calibration.
One clue in this mystery is my baseline black level (the sync pulse I guess - the lines that should stay at -40 and 0) jump up and down from shot to shot.
I'm working with SDI in and out for tape. The WF is using the Composite out and has a Sigma reference signal going to it.
I thought I had the answer to this already but have since discovered this oddness of the baseline jumping all over and I don't want to go lifting the black levels when the baseline seems to be the root of the problem.
Any help from you engineer type people out there is appreciated.

First, open the Io Control Panel and select the radio button in the Analog Output tab to add setup (+7.5). What does that do for your black levels on the external scope?
I suspect what you're seeing is the difference between digital and analog levels.
Report back and we'll go from there.

"Some of your Quicktime software is out of date" popup

I must have had an earlier version of quicktime installed on my computer, but I have updated to 7.2, all the patches etc.. And I get this error. I have gone as far as uninstalling all Apple components, deleting all refrences to Quiktime in the regtistry and reinstalling. The same messgae comes up in two seperate popups. The annoyance level in unbeliveable. Any assistance getting rid of these would be appreciated. I saw the question posted on the forum for an earlier release of QT and the fix was to patch it. I have even upgraded to PRO in an effort to get more support for this issue. Any assistance would be great.

I also am plagued with this problem. In case it helps anyone to diagnose this issue, here is how it started on my computer. It showed up immediately after installing Kid Pix Deluxe 3. During the install, the Kid Pix software said that I needed to install Quicktime to run the program. Since I already had the latest iTunes/Quicktime softare (v7.4), I chose not to install it (the Kid Pix CD had Quicktime 5). When I restarted my computer, it immediately brought up the "Some of your Quicktime software is out of date..." dialog box. Ever since, programs that access Quicktime in some way cause the "...out of date..." dialog to appear. As of yet I have not seen any solution that works; the recommendations to uncheck Flash files in the MIME settings and to uncheck automatic updates did not work for me. Uninstalling Kid Pix and repairing my Quicktime and iTunes installation do not fix the problem either. I have not tried completely uninstalling and then reinstalling Quicktime and iTunes.

Colors in Pages out of whack?

After I installed OSX 10.6.7 and its combo update, Pages is TOTALLY out of whack -- black text comes out white, colors come out all wrong, when I highlight text it comes out some odd purple lilac-like color.. And there seems to be no way to change this! Any suggestions on how to fix this?

Hold down CONTROL OPTION CMD and click 8. This is a toggle for black on white or white on black.
Regards,
Captfred

Unable to link incompatible devices. Please update all out of date devices

I just recently got the trio kit with two DM100's and the wireless controller.
Linksys Easy Link Advisor (LELA) does not install the controller, but it was able to be installed with most functionality manually. (running windows xp 64)
Right Now I am getting the error "unable to link incompatible devices. Please update all out of date devices" when I try to link my zones named Player1 and Player2 for party mode. When viewing details they show different firmware versions (1.7.3 and 1.23.31). I have tried to update, but they show up as completely updated in LELA.
How can I force a firmware upgrade? I did a search, and the help file was of no use. There is also no download available.
For the next gen of linksys home audio, how about a standard webconfig/telnet where I can define a static IP address for the wired and wireless connections? Eventually I hope to start up wireshark and see how this all works, because the system is cumbersome in its current state.
Solved!
Go to Solution.

Basically, Leave it powered on, connected to the internet over the weekend.
Another user also mentioned:
You can force the update to happen by using the Media Center Sofware.
   1. Open media center software
   2. Mouse over the DMP-100 player window and right click to expose menu
   3. Select About to see current firmware version and option to update.
I did this, and it updated...eventually. Took overnight (>3hours), and there was no user feedback/acknoledgment that the command had been received/processed/completed.

Software all out of whack.

Similar Messages

Maybe you are looking for