Software components can keep modifiable in bw 3.5 system change options

hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgent

Hi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks  Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the  Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

Similar Messages

  • How many software components can create maintenance requests/notifications? So far, I count three...

    These are all in EA-PLM
    ILM_UI 'Basic Maintenance Processing: User Interface'
    RPLM_QIMT 'Quality Inspector and Maintenance Technician Roles'
    EAM_SIMPL'Simplification Project in Enterprise Asset Management'
    I can find portal business packages for iViews, but I'm looking for the Web Dynpro ABAP applications. Are there any more?
    Thanks!

    Wow! Thank you guys for the quick response and pointing me in the right direction!
    Altenbach, your example does exactly what I need! 
    Moving forward I should be able to reference the actual total torque number from the call by reference subvi and have the event structure initiate based on the change of that number correct?
    I tried something like this already and for some reason when I add a terminal to the terminal pane on the subvi it does not show up on the main vi. I can only imagine this is because the sub vi is "call by reference". The subvi already outputs an indicator to the front panel of the main vi called "total torque". This is inside a case structure so I don't know how to reference it for the subvi which you created.
    Again, I just want to say I am very thankful I am for the help. I am not here looking for free programming help. I am here asking questions because I truly want to learn. I know I will have to spend a lot more time reading tutorials and practicing basics. This program was just given to me last minute and I'm doing my best. Usually I am very resourceful and can find solutions on my own. This one was just over my head. Thank you.
      -Sean-
    Attachments:
    Impact Tester Main_03.vi ‏245 KB
    ITS_Data Graphs.vi ‏567 KB

  • Can't modify Mavericks iCloud settings from System Preferences or connect Mail to iCloud

    I tried Keychain for the first time the other day, went away for the weekend and forgot my master password #*#@$!
    In the process of trying a few different fixes I've changed my Apple ID password.  Most things are working well.
    I can log in to iCloud via a browser using my Apple ID & new password.  I can also log in to itunes using the new password.
    When I select iCloud from System Preferences and purposefully enter a wrong password, it tells me 'Incorrect password' in red font.  But when I enter the correct password, it is not rejected but the 'Enter Password' option remains on display and all the iCloud options/checkboxes remain greyed out.  
    In Mail, there is an error symbol against the iCloud inbox.  When I click on the error/circle symbol I am told 'Mail can't connect to the iCloud account "iCloud" ' and am requested to enter the password, which I do but with no effect. 
    Contacts has a similar problem and displays an error circle next to the iCloud account list, as does Calendar.
    Any ideas out there?  Please help me!!  
    Is there any way to use Time Machine to revert to earlier settings?

    If you are running Mt. Lion download and apply the OS X Mountain Lion Update v10.8.2 (Combo).  It includes the iCloud preference pane for the System preferences. 
    If you're running Lion then download and apply the OS X Lion Update 10.7.4 (Client Combo) as it also includes the iCloud preference pane.
    OT

  • [ECC6 - se06] - how to set System Change Option / subentries to modifiable or not modifiable

    When the customizing is set to "modifiable" we have to set all thesub items to "modifiable".
    What is the parameter to make all the sub items under Global Settings to modifiable or not modifiable.
    In fact, it is very long and not so interesting to set all sub items each time we are requested to open Customizing.

    Thank you Reagan,
    I think I wasn't precise enough.
    As I tried to show in my snapshot, I agree that I can change all the under items but that is my problem.
    How to make them ALL selected when you set the parent "Global Seting" to modifiable.

  • Import of Software Components to Enterprise Services Builder in XI/PI 7.10

    Hi,
    I'm searching for a way to import software components into the Enterprise Services Builder. My system is a XI/PI 7.10.
    I created the software component in the System Landscape Directory. Can anyone tell me a way how to import those components into the ESR?
    I cannot find import from system landscape directory in the tools tab.
    Thanks in Advance,
    Carsten

    <b>Hi Carsten,
    Its simple mate...just open "Enterprise Service Builder" page.There go to menu option "Object --> Create" or click on "Create Object" icon, then you'll get a window from where you can choose radio button "Import from SLD".
    And to create local software component from ESR itself  then click on radio button "Local Software Component Version".
    Cheers..
    Ram.</b>

  • Products and software components not found in SLD?

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and  i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i amot able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i am not able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

  • My mastro page is not the final page. I can't modified it. The mastro is long 800px but in the design page is long 1000, why?

    my mastro page is not the final page. I can't modified it. The mastro is long 800px but in the design page is long 1000, why?

    Than you Aish for answer to me
    is the first time I use Adobe Muse, my problem is the following:
    I want me to do a landing page with a preload.
    I have done one page very long (5400px)  and i worked just in one mastro because i didn't need other pages.
    I have made a group with my menu and the slide. I put the menu at the bottom of the slide because i want the slide appear first of the menu: like a presentation... once the presentation ended scrolling down and my menu will appear and so the site. I want me to do the effect of the menu fixed and everything beneath scrolling up and down.
    When i have done it, i realized it couldn't work, because the slide together with the menu remain fixed, but the slide covered everything beneath.!!!! I realized again tha maybe it's better having a page for preload and then let the website to start, so i change my pages in adobe muse.
    I added another page in my plan window in adobe muse,  i made another mastro page i change the properties in the page make it shorter  and i drag the new mastro in the new page, then i copied in the empty page my slide.From there in ahead it doesn't work anything in my mastro page.
    Then i deleted everything but not the landing page of the beginning, because i found a preload widget in internet, but now when i activate my mastro in the page in the Plan mode, and with the double click i go inside, i can't modified anything also if i click the option "unlock all in page", and when i go in the site preview everything is uncorrect and it'isn't like my mastro page.
    Sorry for my very long mail and i hope you will understand.
    Thank you again
    regards
    Paola

  • Can't Modify Test Package

    Hi,
    After creating Test Plan and Test Package while trying to modify Test Plan and Test Package (replacing old test cases with the new one) we are getting error: "Changes to Repository or cross-client Customizing not permitted" "Choose 'Display Object' or 'Cancel'"
    It was working before without any error. We started getting this error recently.
    Any suggestion resolving the issue will be appreciated.
    Regards,

    Hi Muhammad 
    Did you face this message only on this scenario? Are the other changes still working?
    Did you check the System Change Option settings (SE06) and Client settings (SCC4)?
    Regards
    Valdecir

  • Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

    Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked.  When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
    I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

    You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

  • Any software by which I can keep an eye on my daug...

    Hi All,
    Is there any way or any software by which I can keep an eye on my daughter mobile (nokia lumia 520) for:
    SMS, Whtsapp, sms, call details and GPS Location as she is going to hostel for studies?
    Lorenz 

    What feature you going to get faster? Ya we too have faster...
    Notifications? We too have notifs
    minimize? Ya we too can minimize
    but standby is not increased in latest and even ram
    many apps bluetoothftp, alchemyos, jmp3tag, here and now and many apps doesn't support 500 but it supports 311... Even i have screenshot embeder,Handler setting embeder

  • I am trying to install software. I keep getting error message: 1008:9,-5000 Access denied Error. Plus: "You don't have enough access privileges for this installation." I have Administration privileges on MY machine. So, why can't I install software on it?

    The machine I am trying to install on is a MacBook Pro. The software is for an IRIScan express 2 scanner. It says (and provides a disc containing the software) it is compatible with Mac OS.
    In System reqirements it states the following:
    This is the minimal system configuration required to use Readiris:
      a Mac OS computer with a G3 processor.
      the operating system Mac OS X version 10.2 (“Jaguar”). Earlier ver- sions of the Mac OS operating system are not supported!
      110 MB of free hard disk space.
    I have no idea what (nor where to find out if it has) a G3 processor is. My machine has Mountain Lion. Is this "above" or "below" "Jaguar"?
    Any assistance will be appreciated.

    I'll try Silverfast.   
    Err... Try VueScan first. VueScan have one-for-all software, Silverfast - lot of modules for specific scanners. If they not have version for your specific scanner - no chances.
    VueScan works with at least some IRIS models: http://applejac.typepad.com/applejac_macintosh_users/2009/05/vuescan-universal-s oftware-image-capture-tool.html
    And I see 10.7-10.8 support on IRIS page: http://www.irislink.com/c2-1628-189/Mac-OS-compatibility-support.aspx

  • Summary report to show all the software components and version installed

    We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
    Thanks!

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Error while trying to import Software components from SLD.

    Hi Gurus,
    Need Help.
    When we are trying to import Software components from SLD we are getting following error. Could not read list of software component versions from SLD. In Description  i am getting following two points.
    1. Could not read list of software component versions from SLD (COULD_NOT_READ_SWCV)
    2. User credentials are invalid or user is denied access
    We have tried following
    1. LCRSAPRFC and SAPSLDAPI are working fine.
    2  SLDAPICUST is ok
    3. In nwa connections are available for LCRSAPRFC and SAPSLDAPI.
    Request you to let us know how to resolve this issue.
    Thanks in advance.

    Hello ,
    Can you check below roles assigned to the user id?
    SAP_SLD_CONFIGURATOR
    SAP_SLD_DEVELOPER
    SAP_SLD_ORGANIZER
    Thanks

  • I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

    I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

     
    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99807)

  • Message interface does not exist in any software components installed on th

    Message interface does not exist in any software components installed on this business system.
    hello,
    When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
    I have deleted the business systems and the technical system and created them again, but no result.
    The product and software componets are in the technical sytem and business systems.
    Any help would be usefull.
    thanks,
    Job

    Hello!
    If someone will search in the future for this error, here is the solution:
    The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
    The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
    Kind regards,
    Klaus

Maybe you are looking for