Software to change USB voltage on Gigabyte motherboard

Hi, all!
I need a program/driver which could change USB voltage on the fly. I need that due to iPad 2 which says "Not charging" when I connect it to my PC. I googled and find out that iPad requires higher current in USB port than most motherboards provide.
In this thread a tool for ASUS motherboards was offered but it's for Windows only. The fact that such a tool exists makes me thinking that it could be implemented for Linux too.
Thanks.

Never mind, it's ok.
Actually, I accidentally told you wrong information. When I decided to find out exact motherboard model, I realized my motherboard is ASUS P5PL2. Sorry, I had to check that far before starting the thread.
However, I have kind of good news. Here (http://ubuntuforums.org/showthread.php?t=1504845) someone solved the problem on Ubuntu 10.10 x64 and offered a small program which enables iPad charging on PC. For those who might read this thread later I provide direct links to it:
Page with the program
Direct link to zipped deb file
Direct link to source code
Unfortunately, when I connect my iPad and start the program, it says:
[bz@bolt ipad_charge]$ sudo ./ipad_charge
ipad_charge: no such device or an error occured
I'm not sure, but I guess this might be related to the problem I mentioned two days ago.

Similar Messages

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

Try here > Mac App Store: "An unknown error occurred (100)" when purchasing

How can I programmatically change the voltage range settings in a DAQ Assistant

Hi,
First post here.
I need to be able to change the voltage range properties of a daqmx DAQ Assistant based on user input. My hardware, an SCXI-1102C does not allow changing this property on a running task, so I'd like to either set the analog input voltage range before the DAQ Assistant activates, or pause the DAQ Assistant immediately after it starts, set the values and then resume.
I don't know how to edit the task ahead of time because the DAQ assistant creates the task when it runs, and there is no task before that.
In the attached picture, I have a conditional section, set to run only if the while loop iteration is 0. I take the task from the Daq assistant, send it to a stop task vi, set the property, and then send the task on to the start task vi. I can watch it run with the debug light on, and everything seems to work correctly, but on the second (and all the other) iteration of the loop, I read out AI.Max and it seems like the DAQ Assistant has re set it back to 5V. Can anyone see what is going wrong here?
BTW, this is continuous acquisition and the code does not produce error messages when it runs.
I did come across a similar question that someone posted here back in 2006, but his question was specifically aimed at a Labview API (VB, I think), and not an actual G solution.
Attached are the actual vi in question and a png image of the block diagram.
Thanks!
Ruby K
Solved!
Go to Solution.
Attachments:
Labview_question.PNG ‏14 KB
Sample_AIV.vi ‏91 KB

First, if you want to start getting beyond the basics with DAQ, you are going to have to stop using the DAQ assistant and do it with lower level DAQmx VI's. There are hundreds of examples in the example finder. You can even right click on the DAQ assistant and select open front panel. That will create a subVI that you can open and see what is going on behind the scenes. Do it. I think you'll find the DAQ task is being recreated on each (though I'm not 100% of how the settings are established or maintained in each section of that subVI).
The second problem is you have a bit of a race condition on iteration 0. Those two DAQ property nodes are running at the same time. So when you read the AI.Max, it may be happening before or after the AI.Max is set in your case structure.
Third, make sure you wire up your error wires.

Satellite S3000: how to change a component on the motherboard?

How do you open the case of this laptop/notebook?
I need to change a component on the motherboard.
I get to the stage where all the screws on the base are off, and it seems like all that remains for access into the casing for the 'system board' motherboard is that MAYBE the strip on the front, just below the screen, should be removed.
Is this so? What do I need to do at this stage?
It's urgent that I get to do this in the next few hours.

I dont know what components you want to change on the motherboard but I dont think that its a good idea. :O
However, I dont think that you will find any officials manual how to do anything on this unit. I think only the service partner can receive such documents.
I have found in the net this site:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm
It describes how to open and remove all parts from the Satellite 1200. I know its not a Sat 3000 but you can detect roughly how to do it.
But you know if you have not experience you shouldnt do or remove anything ;)

N95: does any1 no wer i can get software to change...

N95: does any1 no wer i can get software to change the font type, i.e to tamoha or modern or something like that

I am not sure if you can change the font the phone uses, perhaps try getting hold of theme packs that have the look and feel you like.

How to change CPU voltage on a laptop?

I purchased an HP Envy Touch smart 15 for about 1000$ It is using Windows 8.1 a Intel Core i7-4700MQ processor clocked at 2.40Hz, 16.0GB RAM. I have the problem "Your primary display driver has stopped responding and has sucesfully recovered" I have searched for solutions and I have found many sources to say that the soulution was just to change the voltage from 1.00 to 1.05. This makes sense to me as I have tried changing the Timeout delay and deleting/reinstalling drivers, windows updates, switching to windows 7 even. Nothing has worked and the only solution people are getting is this. The only problem is this is a laptop and I checked the bios and found no option for this. Is there a program I can do this with? Thank you for taking the time to read this and please help! It happens often and it is making my schoolwork/homework a living heck. :/

Hi,
No, you won't be able to "overclock" this kind of laptops. One main understanding reason: Laptops will overheat very quick and their lives will be very short. Vendors don't want users send their machines back because of overheated during warranty period.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

I have my CS3 software in a usb flashdrive now when i install to my new formatted desktop error

i have a cs3 software in a usb flash drive, but now it can't be installed to my newly formatted desktop?
"Adobe set up has encountered a problem and needs to closed." Error signature AppName: setup.exe AppVer:1.0.135.0 Offset:002a7116

clean and then try installing, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
if that fails, download the installation files,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I buy the software to change the pdf file to excell file en costa rica

How can I buy the software to change the pdf file to excell file???

Not sure what you are expecting. Scale is just an abstract concept. The overall content and appearance of the drawing doesn't change. If you place the same drawing on teh same page and just change it's supposed scale, you have changed nothing effectively . As far as AI is concerned, all that matters is the size of the content in relation to the page its on. If you want things to appear at specific sizes, you must scale them accordingly on the page and also keep in mind that AI uses inches as its base unit. so essentialyl you need to define the DPI of the drawing.
Mylenium

PXIe6556 - How to change output voltage during the generation?

I would like to know if is possible to change the output voltage (data lines) during the generation?
1. Start Generation - Vout=1V
2. Change output voltage without stop the generation to Vout=1.2V
3. Change output voltage to ....
Tks
Solved!
Go to Solution.

Hello engfpe,
Take a look at the example bellow.
In this case, it's being generated a waveform, but you can change all that process for a simple constant.
Regards,
Pedro Ivo da Cruz
Engenharia de Aplicações
Attachments:
Voltage (non-regeneration) - Continuous Output.vi ‏72 KB

MOVED: cannot change CPU Voltage??(first time here)

This topic has been moved to Overclockers & Modding Corner.
cannot change CPU Voltage??(first time here)

In Cell Menu you will find something like CPU VID / Over VID. The first will be set to Startup (=you CPU default volts) and the 2nd will be disabled but you can set them manually to CPU VID = 1.4 and OverVID to 3.3% / 5% etc to let the CPU use higher volts when Oc'd. Good luck !

Will sudden change of voltage affect iPad when charging?

Anyone know if sudden change of voltage (lower voltage) affect iPad while charging? I notice when I'm printing some docunments my lights flashes and my UPS voltage display shows sudden drop of voltage. I'm worry if it will affect the iPad.
Thanks.

I notice that you are using an UPS. What is the capacity of the UPS and are you loading it to the max?
 Cheers, Tom

P7N Diamond USB Voltage issues?

Hey Bosskiller & AaronYuri,
Are either of you, or anyone else, aware of any USB voltage issues on this board? I recently bought a 32GB USB Flash drive that was failing bad out of the box. When I tried to boot into Windows Vista with the USB Key plugged in, Vista would give errors saying that the device was not recognized and has failed. I had to unplug the USB Key and plug it back in in order for it to work. Also I was not able to boot from it after creating bootable files on it using the MSIHQ USB Bootble Tool. During BIOS POST, the PC would hang at "Initializing USB Devices" for about 20 seconds and then eventually continue, having not recognized the USB device. I called up the manufacturer support and they suggested that the USB key was not getting enough voltage and had me try plugging it into different USB slots. Turns out that if I plugged it into my Monitor USB Hub it would work fine. Same is true if I plug it into any of the two lower USB slots on the P7N mogo (back of computer). Device fails if plugged into the upper slots or the slots on the front of the PC tower. I use other devices in the front and upper slots all the time without issue, but perhaps they require low voltage. Does this make any sense? Thank you.
Overspeed

Have you tried with different USB device to check if the similar problem will persist?

Software to change USB voltage on Gigabyte motherboard

Similar Messages

Maybe you are looking for