Solaris 10, 6/06 documentation
Found a what's new at:
http://docs.sun.com/app/docs/doc/817-0547
but nothing else.
Does anyone know if Sun is going to post new PDF's for the new version or are we stuck with the "beta" PDF's from FCS?
thanks,
alan
All computer problems occur between zero volts and +5 vdc.
http://www.opensolaris.org/jive/thread.jspa?threadID=10561&tstart=0
Similar Messages
-
Looking for Feedback on Solaris Studio 12.2 Documentation
Send us feedback about Solaris Studio 12.2 Documentation. What's missing? What do you use the most? What do you like/dislike? What would you like to see in future releases?
Start here: http://www.oracle.com/technetwork/server-storage/solarisstudio/documentation/index.html
--Richard Friedman, for the Oracle Solaris Studio documentation team.I know you have a more general concern, but here is the answer on SBR.
SBR - beyond Stack Bounds Read
foo () {
int a[5] = {0, 1, 2, 3, 4};
int i = a[-100]; // Read is beyond stack frame bounds
Possible causes: Reading a local array past the end or before the start. -
Solaris 1.1.2 documentation?
I'm looking to purchase documentation on installation and administration of Solaris 1.1.2. Any suggestions? The oldest I have been able to find on Sun's site is the 2.4 series with refrences to issues in migrating up.
Regards,
William JensenThe "wrong IR type" message is an internal compiler error. Try getting the all the current patches for the Studio compilers and see if that fixes the problem.
Regarding your command line:
Most of the options appear two or three times. You should look into cleaning up the option list.
The -xchip and -xcache options are questionable. If you don't have a particular reason for needing them, remove these options. In the best case they might provide a small performance boost. In the worst case, they will reduce performance significantly.
The -features option has a long list. Most of them are the default and cannot be disabled anyway.
-features=except,rtti,export,tmplife fall into that category.
-features=anachronisms is questionable. It allows code that was considered improper in 1991.
-instances=global is the default
-xalias_level=compatible makes strong claims about the program, allowing the optimizer to make simplifications that are not in general valid. (See the C++ Users Guide for details.) If any of those claims are not true, the program can fail in mysterious ways. -
Solaris 10 in dept documentation
Hi list,
I am completely new to Solaris. I would like to buy a book that covers
Solaris 10 in dept. Any idea about a very good book ?
Many thanks in advance,http://docs.sun.com/
-
Can�t upgrade Solaris 2.6 to Solaris 9 ? HELP
Hi,
I'm trying to upgrade one Sun Enterprise 3500 with Solaris 2.6 to new Solaris 9.
I've already use SUNINSTALL and WEB START methods, without sucess.
There is no error messages in WEB START method..
When using "suninstall" method, I follow all the manual instructions with CLI mode and the instalation returns "install sucess", but when rebooting, some erros apears and starts a reboot cycle:
------ ERROR WITH SUNINSTALL ----------
Use is subject to license terms.
WARNING: add_spec: No major number for fp
WARNING: add_spec: No major number for fp
WARNING: add_spec: No major number for scsi_vhci
WARNING: add_spec: No major number for fp
WARNING: add_spec: No major number for scsi_vhci
WARNING: mod_installdrv: no major number for fcp
Cannot assemble drivers for root /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w21000020372b4363,0:a
Cannot mount root on /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w21000020372b4363,0:a fstype ufs
panic[cpu14]/thread=140a000: vfs_mountroot: cannot mount root
0000000001409970 genunix:vfs_mountroot+70 (0, 0, 0, 200, 14569d8, 0)
%l0-3: 000000000144a400 000000000144a400 0000000001415bc8 0000000001415bd0
%l4-7: 0000000001415800 0000000001411a80 000000000144ac00 000000000144dc00
0000000001409a20 genunix:main+98 (1409ba0, f00584cc, 1409ec0, 32a7af, 2000, 500)
%l0-3: 0000000000000001 0000000000000000 0000000001412b18 0000000078002000
%l4-7: 000000000140a000 0000000000330000 0000000001480dc8 00000000010628d0
skipping system dump - no dump device configured
rebooting...
Resetting...
Software Power ON
When using WEB START, the instalation gives some strange messages at the midle of wizard (using CLI), but continues the instalation. At the end, says "Installing Solaris Software Group", and shows a progression bar, but at same time, changes to prompt and without any error stops the installation. Some process are running but none indicates that install is in progress...
----- WITH WEB START ------ STRANGE MESSAGE:
Reading disc for Solaris Operating Environment...
The system is being initialized, please wait... \
To perform an initial install of the Solaris Operating Environment select
Initial Install. Existing contents of your hard disk will be destroyed.
To perform an upgrade of the Solaris Operating Environment select Upgrade. The
Solaris Operating Environment will be updated and other contents on the hard
disk will be left unchanged. Backing up the existing Solaris Operating
Environment is recommended.
1. Initial Install
2. Upgrade Install
Select Upgrade or Initial install [1] 2
Gathering upgrade information, please wait... \
Could not reinitialize system state. Please exit the installer and restart the
installation.
<Press ENTER to continue|
The system is being initialized, please wait../
To install basic Solaris products into their default directory locations,
select Default Install.
Custom install provides a choice of which Solaris products to install. For each
product, it also provides an option to customize the products install.
Note: Default install is not possible. Default boot disk could not be
determined.
<Press ENTER to continue>
Select the geographic regions and software localizations you want to install.
The English version of Solaris will be installed by default.
[ ] 0 Northern Africa
[ ] 1 Eastern Europe
[ ] 2 Southern Europe
------ AT THE END OF PROCESS -----
Testing the upgrade profile, please wait... /
The following items will be installed:
Solaris Operating Environment: Solaris 9 Software 4/03
Solaris Software Group: Entire Group
Backup Media Type: None
64-Bit Selection: Yes
Region and Locales:
Southern Europe
Portuguese (Portugal) ( pt_PT )
North America
English (United States) ( en_US )
English (POSIX C) ( C )
System Locale: English (United States,ISO8859-1) ( en_US.ISO8
Products:
Solaris 9 Software Supplement CD 385.
Java3D 1.2.1_04 18.3 MB
OpenGL 1.3 105.7 MB
PC launcher 1.0.2 0.9 MB
RSC 2.2.1 8.8 MB
Solaris On Sun Hardware Documentation
SunATM 5.1 9.1 MB
SunForum 3.2 27.1 MB
<--[90%]--[ENTER To Continue]--[n To Finish]-->
SunHSI PCI 3.0 0.5 MB
SunVTS 5.1 PS2 124.4 MB
Enter 'y' to accept these values and start the installation, or 'n' to
return to the beginning and make changes (y/n): y
Installing...
Installing Solaris software group
|-1%--------------25%-----------------50%-----------------75%--------------100%|
# ps -ef
UID PID PPID C STIME TTY TIME CMD
root 0 0 0 17:50:55 ? 0:00 sched
root 1 0 0 17:50:57 ? 0:01 /etc/init -r
root 2 0 0 17:50:57 ? 0:00 pageout
root 3 0 0 17:50:57 ? 0:11 fsflush
root 80 1 0 17:51:57 console 0:00 /bin/ksh /sbin/disk0_install
root 130 1 0 17:52:14 ? 0:00 /usr/sbin/syslogd
root 7407 250 0 19:10:06 console 0:00 ps -ef
root 32 1 0 17:51:01 ? 0:00 /usr/lib/sysevent/syseventd -r /tmp
root 34 1 0 17:51:16 ? 0:00 /usr/lib/devfsadm/devfsadmd -r /tmp -p /tmp/root/etc/path_to_inst
root 242 1 0 17:55:29 ? 0:02 /usr/sbin/nscd
root 250 80 0 17:55:30 console 0:00 sh
root 215 1 0 17:55:29 ? 0:00 /usr/sbin/rpcbind
root 238 1 0 17:55:29 ? 0:00 /usr/sbin/inetd -s
Any ideia whts going wrong?
Thanks for your attention,
Buy
Angelo FariaWell, there is no replys to this, so I presume no one else had this problem...
-
Oracle 8.1.6 on Sun Sparc Solaris 8
Any successful story of Oracle 8.1.6 runs on Sun Sparc Solaris 8?
The documentation of Oracle 8.1.6 mentions that it can run on Solaris 2.6 and 7. But how about Solaris 8?
Thanks.Could you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null -
How to configure SNMP in solaris 10
i am working on solaris management console .i want to configure snmp for this to send traps regarding system performance and cpu usage ..can any body know ho to do this
Integration of Directory Server SNMP agent with Solaris Master agent is documented in the Administration Guide Chapter 14: Monitoring Directory Server using SNMP.
http://docs.sun.com/source/817-7613/snmp.html
Regards,
Ludovic. -
Upgrading Solaris 8 to Solaris10
Dear all
Can i upgrade Solaris 8 to Solaris 10 directly or i have to upgrade to solaris 9 first
any documentation specfic to upgrade will be help
Regards2) If Yes does Solaris 10 support Veritas Filesystem ?No, it dows not. If you want to use VxFS you still need to have Veritas products installed on this server
-
What packages are required for an 11.2.0.3 install on Solaris 11?
Where can I find information on which packages are required to install Oracle 11.2.0.3 on Solaris 11?
The documentation only mentions Solaris 10. I tracked down the packages required for Solaris 10, and most of them are either included in the GA release of 11 or obsoleted.
There are however a couple of packages that are missing from the base install of Solaris 11:
SUNWarc (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* developer/library/lint (missing)
SUNWhea (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* system/header (misising)
So it looks like developer/library/lint and system/header are packages from required for Solaris 10 that are missing on 11. The installer however doesn't check for any packages whatsoever.
Does that mean it's safe to install the database?
Edited by: 894946 on Nov 21, 2011 8:38 AMHere is list of packages you need in order to install Oracle 11gR2 on Solaris 11:
SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
Some of the above are installed by default which you can find by:
pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
I believe you will only have to install the following:
pkg install compatibility/packages/SUNWxwplt SUNWarc SUNWhea SUNWxorg-client-programs SUNWxorg-clientlibs
Cheers -
SUNWdsvh & SUNWdsvhx for Solaris 8 only?
Hi All -
I am installing Solaris packaged version of DS 5.2P4 via the JES method on a Sol10 server. I notice the JES4 will install the packages SUNWdsvh & SUNWdsvhx, however the documentation http://docs.sun.com/source/816-6697-10/install.html#23713 mentions this are only for Sol8 installations. I know the documentation above was created prior to DS 5.2 support on Sol10 - but the majority of the documentation is not updated for each release.
Are these packages only for Solaris 8 as the documentation mentions? If so - why would JES4 which knows the installation is taking place on a Sol10 host - install them?
Any ideas?
Thanks allThe short answer is generally no.
The long answer is that it can be done but you will need to make sure that on the Solaris 10 machine you only use functions/headers/libraries that are available on Solaris 8 otherwise they will not be found and the software won't work.
alan -
Hello-
Does anyone know if/where there is information on installing
BC4J on OC4J on Solaris?
All the documentation/installations I've found have been Windows-
specific.
Thanks,
Rico R. GuzmanI did not run the installer on Solaris.
All the installation and configuration was done under windows.
After everything was working I moved the entire directory
structure to Solaris and made one change to the startup batch
file. The startup batch file looks as follows:
nohup java -cp ./classes:orion.jar
com.evermind.server.ApplicationServer
In windows ./classes was .\classes. This was the only change I
had to make.
Since OC4J is pure Java, it is platform independent and this
proved it completely. -
Using Trunking 1.3 to create a trunk accross two switches
Hi:
I have installed Solaris Trunking 1.3 on my SF 880 which is running Solaris 10. It has two CE interfaces which i have configured in one trunk. Failover works fine when I connect them to a single Nortel 8000 switch. The problem is that I can't get failover working properly when I connect one CE interface to a Nortel 8000 switch and the other CE interface to another Nortel 8000 switch. Should this work? I have seen many references, eg in the Solaris Trunking 1.3 documentation, that actually says you can't create a trunk accross switches but i also found BUG ID 5079123 which says you can.
By the way I can't use the version of trunking software that is bundled with Solaris 10 because it doesn't support the CE interfaces.
Cheers
SteveThanks for your reply. I should have mentioned that i don't need load balencing over the trunk to work. I just need failover to work. In fact that is just what the bug id says i should be able to do across two switches. Here's a copy of the bug id:
Bug ID: 5079123
Synopsis: Trunking 1.3 to support L2 failover across switches
Category: enet_trunking
Subcategory: softwareState: 10-Fix Delivered
Description: Due to overwhelming requests to support L2 failover solution for Sun NIC across two switches. This is not trunking or Link aggregation feature as it breaks the standard of all trunk members connect to one switch.
Requirements are :
1. provide Layer 2 failover similar to IPMP(layer 3) and yet be simple enough to configure.
2. No loadbalancing.
3. Connect across two switches. and when one switch/nic fails, the traffic moves seemlessly and instantly.
4. Failback: When the failed link is back online, traffic moves back to original link. Date Modified: 2004-09-08 06:13:32 GMT+00:00
Cheers
Steve -
This is my first installation for Solaris 10.
I installed the Solaris 10 & my required applications on one Sun FireV210 server. Now I have another server & I want it to be a backup for the first one in case of any failure may happen.
So what is the best way to copy the first server (operating system & applications)?
I heard that I can use installation method called �Flash Installation�; so is it the best way or I can use something else?!!
& if it�s the way does anyone have the Solaris 10 flash installation documentation or a simplified installation tutorial??!!
Thanks in advanceHi,
try to use HTTP for the transfer between
the two servers. Normally You can pass the
firewall using HTTP (like browsers do).
Therefor use classes in the java.net packages.
CU,
Mathias -
How to disable reverse DNS lookup on SSH login
How do I disable reverse DNS lookup on SSH login in Solaris 9? I'm using the version bundled with Solaris 9.
OpenSSH documentation says that I should set UseDNS to no but the option doesnt work in the bundled version of SSH server.
I do not want to upgrade the bundled version of SSH server. Your help will be greatly appreciated.Ah nevermind. I think it was some command I ran changing english.lproj that did this so i am starting over.
-
I've six SUN SERVERS. Four are V890 with Solaris 8 and the other two V480 with Solaris 10. How to configure SNMP in all these ? I want to send SNMP traps to a NMS. How to achieve it ? snmpd daemon is present in V480 machine.
Thanks
---Britto
Message was edited by:
bravobrittoIntegration of Directory Server SNMP agent with Solaris Master agent is documented in the Administration Guide Chapter 14: Monitoring Directory Server using SNMP.
http://docs.sun.com/source/817-7613/snmp.html
Regards,
Ludovic.
Maybe you are looking for
-
Dreamweaver CS5.5 not displaying fonts correctly in live view
I've integrated some web fonts into my website, which display properly in every browser on my computer (and more importantly) on on other computers properly; strangely enough, Dreamweaver CS5.5's live view doesn't display them as they should be displ
-
How to call PL/SQL stored procedure using ODBC?
Could anyone tell me how can I call PL/SQL stored procedure using ODBC? Are there any sample codes? Thanx! null
-
Where can I find customized rfc function?
Hi. 1. I checked using wsadmin and soamanager, T-code wsadmin works forme. What I'm considering is if I connect from remote side(exp: jco) , how can I find these methods? 2. I create function via the se80, and can check in wsadmin, se 37. Is it possi
-
Hi I have exchange 2012 in my environment and I am using office 2013. when I open outlook and try to navigate new mail and search any name.,, there user status don't show online even if Lync 2013 that user showing online.. How can i solve this issue
-
Problem Running Reports on Web layout
Hi Gurus, I am using Oracle Developer Suite 10g Release1 and I am using OS Windows XP. I created a Barcode Report and I am trying to run it via web and it is hanging. Can you please let me know y this is happening. I am using Oracle 10g DB. Thanks an