Solaris 10 on HP DL385 "Error setting up next portion of DMA transfer" ??

We've got an HP DL385-g2 box running Solaris 10 that has started spewing messages of this form:
Error setting up next portion of DMA transfer
Apr 21 07:44:30 teak scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci1166,14
2@12/pci103c,3234@0/sd@1,0 (sd2):
These only show up under moderately heavy load. This is on a P400/512 SAS controller, hardware mirrored, ZFS filesystem. Apparently there's no data corruption but users are complaining about slow performance. HP support has the knee-jerk response to update controller firmware and the cpqary3 driver. The error message is coming out of the 'sd' driver.
Has anyone else seen this problem ??
thanks,
Don M.

Solved the problem. I changed every piece of hardware i could remove. Last but not least, it was a problem with the 2 GB RAM Modules. I don't really know what exactly.
Funny that it works with Linux (memtest still running), but solaris fails to boot.

Similar Messages

Error setting FSS as the scheduler

Hi,
I'm getting an error setting FSS as the default scheduler and it's not listed as a configured class from dispadmin on Solaris 10. Here is the error:
# dispadmin -d FSS
dispadmin: Invalid or unconfigured class FSS
# dispadmin -l
CONFIGURED CLASSES
==================
SYS (System Class)
TS (Time Sharing)
IA (Interactive)
RT (Real Time)
# poolcfg -c 'modify pool pool_default (string pool.scheduler="FSS")'
poolcfg: put property pool.scheduler failed: Error putting property
# uname -a
SunOS uno 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V240 Solaris
# pkginfo -l SUNWfss
PKGINST: SUNWfss
NAME: Fair Share Scheduler
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.21.15.53
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: core software for the fair share scheduler
PSTAMP: on10ptchfeat20080228002232
INSTDATE: Jun 17 2008 12:58
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 10 installed pathnames
6 shared pathnames
7 directories
3 executables
157 blocks used (approx)
I've installed the SUNWfss package and all the necessary zone packages but no luck. I'm not sure what install cluster was originally used to setup the server so it could be missing some other packages that is causing this to fail. Anyone have any ideas on how to resolve this issue?
Thanks in advance,
Ryan

here is the output:
uno#truss -f dispadmin -l
11433: execve("/usr/sbin/dispadmin", 0xFFBFFC9C, 0xFFBFFCA8) argc = 2
11433: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
11433: resolvepath("/usr/sbin/dispadmin", "/usr/sbin/dispadmin", 1023) = 19
11433: stat("/usr/sbin/dispadmin", 0xFFBFFA78) = 0
11433: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
11433: stat("/usr/local/lib/libc.so.1", 0xFFBFF530) Err#2 ENOENT
11433: stat("/usr/sfw/lib/libc.so.1", 0xFFBFF530) Err#2 ENOENT
11433: stat("/usr/lib/libc.so.1", 0xFFBFF530) = 0
11433: resolvepath("/usr/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
11433: open("/usr/lib/libc.so.1", O_RDONLY) = 3
11433: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
11433: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF280000
11433: mmap(0xFF280000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF280000
11433: mmap(0xFF36E000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF36E000
11433: mmap(0xFF376000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF376000
11433: munmap(0xFF35E000, 65536) = 0
11433: memcntl(0xFF280000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
11433: close(3) = 0
11433: munmap(0xFF3A0000, 8192) = 0
11433: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000
11433: getcontext(0xFFBFF768)
11433: getrlimit(RLIMIT_STACK, 0xFFBFF748) = 0
11433: getpid() = 11433 [11432]
11433: setustack(0xFF3A2088)
11433: priocntlsys(1, 0xFFBFFB2C, 1, 0x00000000, 0) = 4
11433: ioctl(1, TCGETA, 0xFFBFED44) = 0
11433: fstat64(1, 0xFFBFEC60) = 0
11433: stat("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", 0xFFBFE808) = 0
11433: resolvepath("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37
11433: open("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", O_RDONLY) = 3
11433: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF390000
11433: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF380000
11433: close(3) = 0
CONFIGURED CLASSES
==================
11433: write(1, " C O N F I G U R E D C".., 39) = 39
SYS (System Class)
11433: write(1, " S Y S\t ( S y s t e m ".., 19) = 19
11433: priocntlsys(1, 0xFFBFFB2C, 1, 0xFFBFFBA4, 0) = 4
11433: schedctl() = 0xFF26E000
11433: fork1() = 11434
11433: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11434: fork1() (returning as child ...) = 11433
11434: getpid() = 11434 [11433]
11434: lwp_self() = 1
11434: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11434: execve("/usr/lib/class/TS/TSdispadmin", 0xFFBFF6C8, 0xFFBFFCA8) argc = 2
11434: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
11434: resolvepath("/usr/lib/class/TS/TSdispadmin", "/usr/lib/class/TS/TSdispadmin", 1023) = 29
11434: stat("/usr/lib/class/TS/TSdispadmin", 0xFFBFFA58) = 0
11434: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
11434: stat("/usr/local/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11434: stat("/usr/sfw/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11434: stat("/usr/lib/libc.so.1", 0xFFBFF510) = 0
11434: resolvepath("/usr/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
11434: open("/usr/lib/libc.so.1", O_RDONLY) = 3
11434: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
11434: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF280000
11434: mmap(0xFF280000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF280000
11434: mmap(0xFF36E000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF36E000
11434: mmap(0xFF376000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF376000
11434: munmap(0xFF35E000, 65536) = 0
11434: memcntl(0xFF280000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
11434: close(3) = 0
11434: munmap(0xFF3A0000, 8192) = 0
11434: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000
11434: getcontext(0xFFBFF748)
11434: getrlimit(RLIMIT_STACK, 0xFFBFF728) = 0
11434: getpid() = 11434 [11433]
11434: setustack(0xFF3A2088)
11434: ioctl(1, TCGETA, 0xFFBFEDBC) = 0
11434: fstat64(1, 0xFFBFECD8) = 0
11434: stat("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", 0xFFBFE880) = 0
11434: resolvepath("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37
11434: open("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", O_RDONLY) = 3
11434: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF390000
11434: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF380000
11434: close(3) = 0
TS (Time Sharing)
11434: write(1, " T S\t ( T i m e S h a".., 18) = 18
11434: _exit(0)
11433: waitid(P_ALL, 0, 0xFFBFF600, WEXITED|WTRAPPED) = 0
11433: priocntlsys(1, 0xFFBFFB2C, 1, 0xFFBFFBA4, 0) = 4
11433: fork1() = 11436
11433: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11436: fork1() (returning as child ...) = 11433
11436: getpid() = 11436 [11433]
11436: lwp_self() = 1
11436: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11436: execve("/usr/lib/class/IA/IAdispadmin", 0xFFBFF6C8, 0xFFBFFCA8) argc = 2
11436: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
11436: resolvepath("/usr/lib/class/IA/IAdispadmin", "/usr/lib/class/IA/IAdispadmin", 1023) = 29
11436: stat("/usr/lib/class/IA/IAdispadmin", 0xFFBFFA58) = 0
11436: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
11436: stat("/usr/local/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11436: stat("/usr/sfw/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11436: stat("/usr/lib/libc.so.1", 0xFFBFF510) = 0
11436: resolvepath("/usr/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
11436: open("/usr/lib/libc.so.1", O_RDONLY) = 3
11436: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
11436: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF280000
11436: mmap(0xFF280000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF280000
11436: mmap(0xFF36E000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF36E000
11436: mmap(0xFF376000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF376000
11436: munmap(0xFF35E000, 65536) = 0
11436: memcntl(0xFF280000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
11436: close(3) = 0
11436: munmap(0xFF3A0000, 8192) = 0
11436: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000
11436: getcontext(0xFFBFF748)
11436: getrlimit(RLIMIT_STACK, 0xFFBFF728) = 0
11436: getpid() = 11436 [11433]
11436: setustack(0xFF3A2088)
11436: ioctl(1, TCGETA, 0xFFBFEDBC) = 0
11436: fstat64(1, 0xFFBFECD8) = 0
11436: stat("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", 0xFFBFE880) = 0
11436: resolvepath("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37
11436: open("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", O_RDONLY) = 3
11436: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF390000
11436: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF380000
11436: close(3) = 0
IA (Interactive)
11436: write(1, " I A\t ( I n t e r a c t".., 17) = 17
11436: _exit(0)
11433: waitid(P_ALL, 0, 0xFFBFF600, WEXITED|WTRAPPED) = 0
11433: priocntlsys(1, 0xFFBFFB2C, 1, 0xFFBFFBA4, 0) = 4
11433: fork1() = 11438
11433: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11438: fork1() (returning as child ...) = 11433
11438: getpid() = 11438 [11433]
11438: lwp_self() = 1
11438: lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
11438: execve("/usr/lib/class/RT/RTdispadmin", 0xFFBFF6C8, 0xFFBFFCA8) argc = 2
11438: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
11438: resolvepath("/usr/lib/class/RT/RTdispadmin", "/usr/lib/class/RT/RTdispadmin", 1023) = 29
11438: stat("/usr/lib/class/RT/RTdispadmin", 0xFFBFFA58) = 0
11438: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
11438: stat("/usr/local/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11438: stat("/usr/sfw/lib/libc.so.1", 0xFFBFF510) Err#2 ENOENT
11438: stat("/usr/lib/libc.so.1", 0xFFBFF510) = 0
11438: resolvepath("/usr/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
11438: open("/usr/lib/libc.so.1", O_RDONLY) = 3
11438: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
11438: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF280000
11438: mmap(0xFF280000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF280000
11438: mmap(0xFF36E000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF36E000
11438: mmap(0xFF376000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF376000
11438: munmap(0xFF35E000, 65536) = 0
11438: memcntl(0xFF280000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
11438: close(3) = 0
11438: munmap(0xFF3A0000, 8192) = 0
11438: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000
11438: getcontext(0xFFBFF748)
11438: getrlimit(RLIMIT_STACK, 0xFFBFF728) = 0
11438: getpid() = 11438 [11433]
11438: setustack(0xFF3A2088)
11438: ioctl(1, TCGETA, 0xFFBFEDBC) = 0
11438: fstat64(1, 0xFFBFECD8) = 0
11438: stat("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", 0xFFBFE880) = 0
11438: resolvepath("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37
11438: open("/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1", O_RDONLY) = 3
11438: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF390000
11438: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF380000
11438: close(3) = 0
RT (Real Time)
11438: write(1, " R T\t ( R e a l T i m".., 15) = 15
11438: _exit(0)
11433: waitid(P_ALL, 0, 0xFFBFF600, WEXITED|WTRAPPED) = 0
11433: _exit(0)

Essbase Error:Set is too large to be processed. Set size exceeds 2^64 tuple

Hi,
we are using obiee 11.1.1.6 version with essbase 9.3.3 as a data source . when I try to run a report in obiee, I am getting the below error :
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Internal error: Set is too large to be processed. Set size exceeds 2^64 tuples (HY000)
but if I run the same query in excel add in, I am just getting 20 records . wondering why I am getting this error in obiee . Does any one encountered the same issue ?
Thanks In advance,

Well if you want to export in I think you have to manually do it.
The workaround it to open your aperture library by right clicking it and show contents...
Then go into your project right click show contents...
In here there are sub folders on dates that the pictures were added to those projects. If you open the sub folder and search for your pictures name it should be in that main folder.
You can just copy it out as you would any normal file to any other location.
Voila you have manually exported out your file.
There is a very similar post that has been close but again you can't export the original file that you are working on - FYI http://discussions.apple.com/thread.jspa?threadID=2075419

Strange Runtime Error - Error setting property 'page1' in bean of type null

All I have here is a treenode with its URL set to a web page. When the node is clicked, I get this:
===============================
[#|2006-07-25T09:39:20.204-0600|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=16;|WebModule[/HNESWebApp]org.apache.jasper.JasperException: Error setting property 'page1' in bean of type null
javax.faces.FacesException: org.apache.jasper.JasperException: Error setting property 'page1' in bean of type null
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:327)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:311)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at ccic2s.netsvr.hnes.web.hneswebapp.login.LoginFilter.doFilter(LoginFilter.java:198)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Caused by: org.apache.jasper.JasperException: Error setting property 'page1' in bean of type null
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:384)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
... 49 more
|#]
======================
Any ideas?
TIA

Okay, I found it - my bad but this might help you..
Turns out the managed-beans.xml (and possibly other files /directories) under WEB-INF were set to read only due to the CM tool I am using - these files were checked in at one point (probably shouldn't have been). I thought I got them all but had missed a few.
So the moral of the story is beware of setting read-only files!

P6v7 Web Services Oracle Universal Installer Error Setting Java_Home veriab

Hi,
I am installing Primavera P6 v7 web serivces on a Ms Windows 2003 SP2 server machine but it gives error "error setting Java_Home environment variable" every time i run the oracle universal installer setup of P6 v7 web services. I have already installed Java JRE1.6.0_14 and set the JAVA_HOME variables in both system and user variables. I have also tried manually setting path of JAVA during setup but no luck so far everytime same error. I have been looking at the log file in oracle inventory folder but did not find any hint to resolve the issue.
Please suggest a solution or workaround.
Regards,
Shahid

r u using 32bit or 64bit java?? better to use 32 bit java. Create 3 variable for EPPM P6
1) variable name: JAVA_HOME Value: c:\Java32\JRE1.6.0_27
2) variable name: JRE_Location value: c:\Java32\jdk.1.6.0_27\jre
3) variable name: p6_java_home value: c:\Java32\jdk.1.6.0_27

Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed

Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.

Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM

Error setting property in bean of type null

Hi i have jsf page and input text
a managed bean with property sum of type float
i attached this property to the input text:
<h:inputText id="adr" value="#{userBean.sum}"/>
but when enter a value and submit the page
it prints me error in the page:
Error setting property 'sum' in bean of type null
any idea?

The message says that the userBean is null.
Check your faces-config.xml.

Error setting property 'html1' in bean of type null

Dear All;
I am currently on site, and away from my team, so they send over additional screens, that i treid to add to the project i have with me, i added the model, i add the SRC folder, and the .JSPX pages, only when i run the pages, i get Error setting property 'html1' in bean of type null, i checked previous threads, and i know the error and accordingly i checked that the page def exists, which it does, and that all the managed beans are there, and linked to faces config, which they are, so i am just wondering if any1 has any idea, as to how to make the pages work...
regards
Halim

hi frank,
I cross checked, all the entries in the bean, with those in the JSPX source code, and chceked in the auto comment of the JSPX page the name of the bean, i have checked the faces config, i am going to remove the the new models and re-add them, just tell me if i need to add any files other than those:
MODEL X folder, which contains the model
JSPX folder, which contans the pages
SRC folder in view controller
And the faces config to web-inf
thanks in advance man
regards
Halim

Conversion Error setting value ''{0}'' for ''{1}''

Hi
I have to populate a drop-down list on my page with the values coming from the DB.
JSF code:
<td align="right"><div id="wait" style="visibility:hidden;">Select an existing Application</div></td>
<td align="left"><div id="wait1" style="visibility:hidden;" >
<h:selectOneMenu id="exist" value="#{processApplication.selectedOwner}" styleClass="selectOneMenu">
<f:selectItems value="#{processApplication.existingOwners}"></f:selectItems>
</h:selectOneMenu>
</div>
</td>
processApplication bean:
public List<SelectItem> getExistingOwners() {
//existingOwners = this.getOwners();
try{
     List < SelectItem > existingOwners = new ArrayList < SelectItem > ( ) ;
     SelectItem si_0 = new SelectItem();
     SelectItem si_1 = new SelectItem();
SelectItem si_2 = new SelectItem();
     si_0.setValue("11");
     si_0.setLabel("sri");
     si_1.setValue("21");
     si_1.setLabel("ADAMS");
     existingOwners.add(si_0);
     existingOwners.add(si_1);
     logger.info("values in the list" +existingOwners.get(1).getValue());
          }catch(Exception e){
               logger.debug(e.getCause());
               e.printStackTrace();
          return existingOwners;
     public void setExistingOwners(List<SelectItem> existingOwners) {
          try{
          this.existingOwners = existingOwners;
          }catch(Exception e){
               logger.debug("%%%%");
               logger.debug(e.getCause());
               e.printStackTrace();
public String getSelectedOwner() {
     try{
     List<SelectItem> test = this.getExistingOwners();
     selectedOwner = (String)test.get(1).getValue();
     logger.debug("selected owner from the list" +selectedOwner);
     }catch(Exception e){
     logger.debug(e.getCause());
     e.printStackTrace();
     return selectedOwner;
     public void setSelectedOwner(String selectedOwner) {
          this.selectedOwner = selectedOwner;
public List<SelectItem> getExistingOwners() should actually be a call to the DB to get the list.
But since i was getting exception I tried to hard code the list in the method itself.
But , I get this exception:
logger.info values in the list 21
[6/15/09 12:49:45:687 EDT] 0000003d ServletWrappe E SRVE0068E: Uncaught exception thrown in one of the service methods of the servlet: /processApplication.jsp. Exception thrown : javax.servlet.ServletException: Conversion Error setting value ''{0}'' for ''{1}''.
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:658)
     at com.ibm._jsp._processApplication._jspService(_processApplication.java:149)
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:118)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:701)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:646)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
Earlier, I had a drop down list that was working perfectly fine.
But its values came from a Helper class and not the DB.
What is it that Iam missing or doing wrong?
Please help me.
Thanks.

Based on your example on the link that you referred to I tried to do this
fillSelectItems();
as the initialization block (I read what it means)
changed my getter method to
public List<SelectItem> getExistingOwners() { return existingOwners; }
private void fillSelectItems() {
this.existingOwners = new ArrayList<SelectItem>();
try{
     existingOwners.clear();
     List test = this.getOwners();
     SelectItem[] myitem = new SelectItem[test.size()];
     for(int i=0;i<test.size();i++) {
     Object[] arrayOne = (Object[])test.get(i);
try{
     SelectItem tmp = new SelectItem();
     tmp.setLabel(arrayOne[0].toString()+(String)arrayOne[1]);
     tmp.setValue((Integer)arrayOne[0]);
     myitem[i] = tmp;
this.existingOwners.add(myitem);
}catch(Exception e){
          logger.debug(e.getCause());
          e.printStackTrace();
     }catch(Exception e){
          logger.debug(e.getCause());
          e.printStackTrace();
Basically, I moved what I had earlier in getter method I have it now in the fillSelectItems()
Butthen, I get a NullPointerException.

Error: Set type Z contains multiple-value attributes

Hi forum,
I have a problem when i try to assign a set type with the same value but diferent name on another set type to the same product category.
This is the detail of the error but i dont know where i have to set this indicator:
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Any sugerence about this?
Regards and thanks in advance,
Mon

Hi Nelson,
I create two set types, the description is not the problem. I have discover that when i try to assign these attributes in the same set type or in other appears this error.
The set types have the same values. For example:
zcountry1. Values: sp - spain. fr - france.
zcountry2. Values: sp - spain. fr - france.
When i try to configurate the comm_hierarchy in my category appears this error:
Set type zcountry2 contains multiple-value attributes.
Diagnosis
The set type ZGAME5 contains multiple-value attributes. It cannot be assigned to the category as extended maintenance has not been activated.
Procedure
Multiple-value attributes are stored in the PME. If you want to use the set type ZGAME5, you must set the Extended Maintenance Options indicator for the hierarchy.
Extended Maintenance Is Possible for the Hierarchy
Definition
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Where is this indicator¿? in R3?
So, these are the steps...can anybody help to me?
Regards and thanks in advance.

Error:Set by Host Name:CRMDEV;Transaction:R3AS:SMOF_DOWNLOAD

Hi Folks,
I am trying to replicate BP from CRM to R/3.All the Mappings from CRM to R/3 are already maintained.Also I have created the subscriptions and publications for R/3 in Admin Console.All the RFC Connections are working correctly. When I checked the SMQ1 in CRM I got the following error:
Set by Host Name: CRMDEV;Transaction R3AS:Report:SMOF_DOWNLOAD.
Can anyone guide me how to solve this issue?
Thanks.
Sudhan

Hi All,
Solved this issue myself.
Basically no need to worry about this queue message.
1) I done set the filter for EQUIPMENT in t-code R3AC1
2) Customer Relationship Management --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> define default setting for Replication or equipment.
Site name - ERP logical system name
IBase Category - EQ
Obj.Family - 0401
Category ID - MAT_Z401 (Important note is this category is created under R3PRODSTYP hierarchy, under MAT_ category). Equipments in ERP also should create using this Category, then only the equipments will be downloaded)
Delta down load checked
3) Go to R3AS and select load object as EQUIPMENT and start
4) you can see the IBASE in CRM using IB53 or using the webUI search.
Thank you and Regards,
Niranjan

Error Setting up Transcoding

Hi there,
Please help me with the above problem, details are:
Product :
Adobe Encore CS3
Error Message:
Error setting up transcoding
System:
HP Pavillion
Media Center m8070a PC
Intel Pentium D Processor 915
1024 MB DDR2
250GB 3G SATA hard drive
NVIDIA Geforce 7500LE 3D
Details
Have set up a project as follows:
a) Two movie timelines - the product from a project in Adobe premiere pro CS3
b) One slide show created from a set of pictures - with a .wav audio file as music background
The file has been set up to play one of the timelines as first play. After finishing playing the video, it goes on to display the menu. Have selected one of the wedding menus (Blossoms Menu). Have run all link checks and everything comes out OK from the check button.
When I click "Build" the file starts to transcode and starts with the slideshow. It then returns the error message "Error setting up transcoding" and when I click ok it says "Slideshow Build...failed".
What I tried to do:
a) Removed the audio file - still faced the error
Please advise what is causing this error

I am having this exact same problem. Any help would be much appreciated!
Thanks in advance.
T.

Error Setting Up Transcoder

Finish a project but when I try to transcode some avi files I get "Error setting up transcoder"
If I try to create a DVD Image I get the same message.
Anybody had this problem??
Info:
WinXP Pro SP2
Avi's encoded with power director 4.0 using compressor xvid mpeg-4 codec
Thanks

> I encoded the avi to DV-AVI using power director, but the files resulted in 8GB each! that's a lot of space. Anyway id did worked on encore and made a 4.7GB, but it took too much time. Is there a DV-Codec that will encode a xvid to DV-AVI with less space requirement???
The way Encore does this is to tell you in the project window what the transcoded bitrate will be with the current settings.
You can prove this to yourself by making sure the correct column is being displayed in the project window - right click on the part where the columns are named, and you should see a pop up with the option "columns". Make sure that the "bitrate" column is being displayed.
Then, go to the project transcode settings (right-click on the asset in the project window in the "Transcode Settings" column) and pick a low value. You will see the value in "bitrate" column change.
@Joe - I thought Encore did indeed display the bitrate that the current transcode settings will give - it's in the project window, under "bitrate" described above

Adadmin error - DCPW null for "IZU" - aipspv(): Error setting up PDI list

Hi,
I am getting the folowing error while running adadmin
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
AD Administration error:
DCPW null for "IZU" [278]
AD Administration error:
Failed getting PDI list for product 'izu'
AD Administration error:
aipspv(): Error setting up PDI list for upgrade
Already checked the metalink notes
294354.1 Failed Getting Pdi List For Product 'Alr'
211674.1 Autoupgrade Fails with Error setting up PDI listc
171092.1 AutoPatch Error: aipspv()
Checked the status of IZU product in fnd_product_installations
What does this "DCPW" stand for ?
adadmin complains of the value being null
What should be the right value ?
How can I update that ?
Can someone please help to resolve the issue
Thanks

Hi Hussein
FNDCPASS errored out with ORA-01403 error
Also gave "Memory fault"
dba_users and fnd_oracle_userid show that this user exists
/apps/qtcstg > FNDCPASS apps/<pwd> 0 Y system/<pwd> ORACLE IZU IZU
Log filename : L5504280.log
Report filename : O5504280.out
Memory fault
/apps/qtcstg > cat L5504280.log
Application Object Library: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
module:
Current system time is 18-JAN-2007
06:27:22
APP-FND-02704: Unable to alter user IZU to change password.
APP-FND-01564: ORACLE error 1403 in changepassword
Cause: changepassword failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was
executed from the file &ERRFILE.

IllegalArgumentException: Conversion Error setting value ''{0}'' for ''{1}'

Hi all i am facing one problem while using <h:selectManyMenu style="height:100;" value="#{cityf.cityLook}">
<f:selectItems value="#{cityf.city}" />
</h:selectManyMenu>
so ,plz help me about this error.!!!!!!
java.lang.IllegalArgumentException: Conversion Error setting value ''{0}'' for ''{1}''.
     com.sun.faces.util.Util.getSelectItems(Util.java:670)
     com.sun.faces.renderkit.html_basic.MenuRenderer.getOptionNumber(MenuRenderer.java:509)
     com.sun.faces.renderkit.html_basic.MenuRenderer.renderSelect(MenuRenderer.java:486)
     com.sun.faces.renderkit.html_basic.MenuRenderer.encodeEnd(MenuRenderer.java:451)
     javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:740)
     com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:473)
     com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:470)
     com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:253)
     javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
     javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:629)
     javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:566)
     com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
     org.apache.jsp.Demo_jsp._jspx_meth_h_005fpanelGrid_005f0(Demo_jsp.java:192)
     org.apache.jsp.Demo_jsp._jspx_meth_h_005fform_005f0(Demo_jsp.java:159)
     org.apache.jsp.Demo_jsp._jspx_meth_f_005fview_005f0(Demo_jsp.java:125)
     org.apache.jsp.Demo_jsp._jspService(Demo_jsp.java:90)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
     org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
     org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
     org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
     org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
city.jsp:
<html>
<body>
<f:view>
<h:form id="select">
<h:panelGrid columns="1">
<h:column>
<h:outputText value="Select City : "/>
<h:selectManyMenu style="height:100;" value="#{cityf.cityLook}">
<f:selectItems value="#{cityf.city}" />
</h:selectManyMenu>
</h:column>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
City Bean:
public class City {
     private CityIDLookup[] city;
     private String[] cityLook;
public CityIDLookup[] getCity() {
     return city;
public void setCity(CityIDLookup[] city) {
     this.city = city;
public String[] getCityLook() {
     return cityLook;
public void setCityLook(String[] cityLook) {
     this.cityLook = cityLook;
faces.config.xml:
<managed-bean>
<managed-bean-name>cityf</managed-bean-name>
<managed-bean-class>com.class.City</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>

With SelectItem I mean the javax.faces.model.SelectItem class.
<h:selectManyMenu value="#{myBean.selectedItems}">
    <f:selectItems value="#{myBean.selectItems}" />
<h:selectManyMenu>MyBeanprivate String[] selectedItems; // + getter + setter
private List<SelectItem> selectItems; // + getter

Solaris 10 on HP DL385 "Error setting up next portion of DMA transfer" ??

Similar Messages

Maybe you are looking for