Solaris 8 config for DSL

I want to reconfigure my standalone SunBlade100 for DSL service. The OS is Solaris 8 10/01, and is currently configured for dial-up access to an ISP.
I've edited the etc/hosts, etc/resolve.conf, and etc/nsswitch.conf files, and I created an etc/defaultrouter file containing the gateway IP address.
Sun PPPD 4.0 is installed, and includes PPPoE.
My question is what else do I need to do in order to complete the configuration?
Are there any good references for Solaris DSL configuration?
Thanks in advance?

Hello,
I supose that its an errata but its /etc/resolv.conf and not /etc/resolve.conf.
Your access internet via a router. I don�t know about DSL but if it�s a standar router you shoudn�t have to configure pppd, just a normal network access with the routing and the naming service properly configured.
If you edit /etc/defaultrouter, the changes will take effect on the next reboot, so maybe you�ll have to add a route manually if you cannot shutdown the machine:
route add default your_router_ip
This way you should ping your router, if the routing is properly configured your dns server too (specifying it�s IP) and finally if the naming service is well configured, any Full Qualyfied Domainame on internet.
Try this and post the results. Bye,
Joseba M. Iturbe
P.D: Read another similar post on this disscussion forum.

Similar Messages

How to config for DSL !!!

I am using DSL with the verizon.
I just install 5.8 x86 on my PC.
But could not browse on the Web.
I need to know whatelse I need to do ?
Do I have to Configure DHCP ?
How can I do it ?
Please advise.
Thanks again.
From
Pranav

Your router should be the dhcp server for your internal network or you can just give your solaris machine an address on the same 192.168.2 network. You will have to configure the external interface of your router for dhcp so it will receive an ip, dns and gateway addresses for the outside world (internet) - that is if you were not assigned a set ip address. What type of router is it?
Lee

Is /var/ld/64/ld.config installed by Solaris 8 for 64-bit?

According to the man page of crle command, there is a default configuration file (/var/ld/64/ld.config) for 64-bit objects. But I can not find it.
I tried to run crle -64 command for processing 64-bit objects, and got failed because of the missing of /var/ld/64/ld.config file.
I appreciate if anyone can tell me how to solve my problem.

1. I'm using Solaris 10 10/08
2. yes, no probles during sol8 container installation
3.flar archive is used, creation without any errors
4.here is the S40_setup_preload script:
# Tell ld.so.1(1) to LD_PRELOAD the s8_preload library.
# The crle must be done within the running zone due to differences in the
# format of ld.config between S8 and S10 and beyond.
# As part of the p2v module interface there are environment variables set for
# this script (e.g. FILEDIR - path to brand-specific file repository).
# See the p2v script for a full list of variables.
S8_PRELOAD=/.SUNWnative/usr/lib/brand/solaris8/s8_preload.so.1
S864_PRELOAD=/.SUNWnative/usr/lib/brand/solaris8/64/s8_preload.so.1
# We have to add the s8_preload library to the secure path or commands
# that run with setuid privileges (e.g. a shell via "su" from a normal user)
# will not be allowed to access the library.
SECURE_DEST=/usr/lib/secure/s8_preload.so.1
SECURE64_DEST=/usr/lib/secure/64/s8_preload.so.1
tag="pre_p2v"
if [ -f $S8_PRELOAD ]; then
if [ ! -h $SECURE_DEST ]; then
if [ -f /var/ld/ld.config -a ! -f /var/ld/ld.config.$tag ]; then
cp -p /var/ld/ld.config /var/ld/ld.config.$tag
fi
ln -s $S8_PRELOAD $SECURE_DEST || exit 1
fi
crle -c /var/ld/ld.config -u -E LD_PRELOAD=$SECURE_DEST || exit 1
fi
if [ -f $S864_PRELOAD ]; then
if [ ! -h $SECURE64_DEST ]; then
if [ -f /var/ld/64/ld.config -a \
! -f /var/ld/64/ld.config.$tag ]; then
cp -p /var/ld/64/ld.config /var/ld/64/ld.config.$tag
fi
ln -s $S864_PRELOAD $SECURE64_DEST || exit 1
fi
crle -64 -c /var/ld/64/ld.config -u -E LD_PRELOAD=$SECURE64_DEST ||
exit 1
fi
We have many Solaris 10 systems here but there is no /var/ld/64/ld.config file there only the empty
/var/ld/64 Dir exists. I don't know what's the reason why the post install script is using the S40_setup_preload.
Rainer

Unable to configure PPPoE in Cisco 877 for DSL connectivity

Hi,
I am trying to setup a DSL connection with Cisco 877 as the CPE. The CLI does not list the option of PPPoE for protocol in the vpdn group config prompt. If i manually enter PPPoE as the encapsulation, the vpdn group configured vanishes from the config!
Any clues? Has anyone got a sample config for a cisco 877 connecting to DSL through PPPoE. I followed the sample config in the TAC website giving the example for cisco 827-pppoe -DSL.
Some more inputs - as soon as i connect the DSL line the ATM interface line protocol comes up but unable to see anything in debug vpdn or debug ppp auth. The router IOS feature set is Advanced Security services.
Regards
NSG

Hi Gnanavel,
You need bba-group instead :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftpprfls.htm#wp1088274
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541b8.html#wp1027195
Thanks and Regards,
~Zulfiqar

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Looking for a way to optimize firefox for dsl

i recently switched from cable to dsl.
during the setup a small app from at&t tweaked ie8 to optimize the browser for dsl.
ie8 now loads pages faster than firefox 3.6.8!
is there an add on or set of tweaks that i can apply to optimize firefox ?

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Be careful with extensions like Fasterfox that make significant changes to network prefs. Not all sites may work well with such tweaks and by making too many connections to a server you may annoy administrators and get banned.

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Oracle 8.1.5 and Solaris v7 for Intel

Does anyone know if Oracle 8i (8.1.5) will work on Solaris v7
for Intel. Don't laugh...I know these are old versions but if
they will work I would like to know.

Does anyone know if Oracle 8i (8.1.5) will work on Solaris v7
for Intel. Don't laugh...I know these are old versions but if
they will work I would like to know.

How can I use the "gcc compiler and emacs editor" in Solaris 8 for Intel?

I installed Solaris 8 for Intel to my desktop computer.
After the installation, I found I couldn't use the companion software (the software CD included in the Multilinugal Media Kit for Solaris 8) - especially the emacs editor and gcc compilers.
I certainly installed the companion software to my computer. And I can identify that those softwares are
really installed to my system. In order to check out whether I installed them or not, I went to the "System Administrator" and opened the "Solaris Product Registry", in which I identified that all the files in
the companion software were succesfully installed in my computer.
However, when I open terminal or console box and tries to use those
software, the system responds that "there is no emacs or gcc."
Why I cannot use those things?
Did I install the companion software wrong?
I really don't understand why I can't use them.
For your reference, I saw the directories "/usr/bin" and "usr/ccs/bin"
too.
In /usr/bin I typed
#as
and no such command.
In /usr/ccs/bin
#as
and also no such command
was what I had as a response.
If I installed the companion software CD correctly and if they are installed somewhere in my computer,
where I can find them and how I can use those softwares?
Lastly, whenever I try to connect to my ISP via telnet mode, I see this
message.
"Try to connect ...
connected to ***.***.***.*** (IP address of my ISP)
Closed by foreign hosts."
Is there any one who knows why this happens?
Thanks for reading my question.

gcc and emacs install in /opt/sfw. You should change your path statement to include /opt/sfw/bin and should obtain the FAQ from sunfreeware.com. The FAQ answers all your questions.
I have installed gcc and gtk and am using both at this time.
[email protected]

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

If you are seldom in a Wi-Fi Network Area, then you can turn off Wi-Fi until you knowingly are in such a Network Area. You can go through your Applications where you don't really need to know the instant an Update is available and turn off the push update notifications. You can turn down the screen brightness. You can set the sleep cycle to 1-min. You could set your email to check for new messages every 30-min. rather than less than 1 min. Just some of many steps available.

Solaris 8 for intel boot disk.

My Solaris 8 for intel boot disk was delivered to me corrupted and will not boot in serveral of my machines, how do I go about creating another one or should I request a replacement. Thanks.

Hi
This is Raghu from Hyderabad, India
you can download bootdisk creation files from following site.
http://soldc.sun.com/support/drivers/dca_diskettes/
try in with this URL it may be help you out.
please give me reply
Raghu

Fail to install solaris 8 for intel

hello. i downloaded three files and made a CD for each one. but during the installing on a Dell PowerEdge 6450
(4 x Pentium III 550)which has two AIC 7899 ultra160/m SCSI adapters and a Dell PERC RAID controller (i note they are not included in the hardware compatibility list of solaris 8 for
intel), the install process stopped when it was "I2O Nexus:
initializing IO processor 0" and didn't go any further. when i attempt to intall it on another machine(2 x PIII 1000) which has a AIC 7892 ultra160/m SCSI adapter, the process
stopped saying "no disks that meet the criteria in the solaris installer documentation found" after solaris web start began to run. before this, it has reported resource conflict of PNP0C01
and ISY0050. and the installing stopped when "using RPC bootparams for network configuration information" on a PIII 800 PC. what's wrong with my installing. is it due to the incompatibility of hardware or something else?how to resolve it if possible? help is in need very much.besides,what does
DCA mean?sorry, i'm a newbie in this field.
thanks
xoing

Hi,
Problem with PERC RAID controller card.
You try to install the driver for AIC 7899 and Dell PERC RAID controller card. In dell computers, they have dell PERC RAID controller driver for Solaris 7 version. They don't have the driver for solaris 8 version.
You can download driver for SCSI AIC 7899 from this URL:
http://www.adaptec.com/worldwide/support/driverdetail.html?cat=/Product/ASC-39160&filekey=u160_slrs_v121_dd.img.Z
Then you check with your local dell support provider for PERC RAID controller driver for solaris 7 and solaris 8.
Thanks.
revert back.
regards,
Senthilkumar
SUN - DTS

Solaris 8 config for DSL

Similar Messages

Maybe you are looking for