Unable to configure PPPoE in Cisco 877 for DSL connectivity
Hi,
I am trying to setup a DSL connection with Cisco 877 as the CPE. The CLI does not list the option of PPPoE for protocol in the vpdn group config prompt. If i manually enter PPPoE as the encapsulation, the vpdn group configured vanishes from the config!
Any clues? Has anyone got a sample config for a cisco 877 connecting to DSL through PPPoE. I followed the sample config in the TAC website giving the example for cisco 827-pppoe -DSL.
Some more inputs - as soon as i connect the DSL line the ATM interface line protocol comes up but unable to see anything in debug vpdn or debug ppp auth. The router IOS feature set is Advanced Security services.
Regards
NSG
Hi Gnanavel,
You need bba-group instead :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftpprfls.htm#wp1088274
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541b8.html#wp1027195
Thanks and Regards,
~Zulfiqar
Similar Messages
-
Unable to configure file adapter using FCC for Multilevel hierarchy
Hi Experts,
Can anyone help me in configuring the Receiver file adapter with FCC for the structure given below
<Root>
<Level1>
<Ele1>
<Ele2>
<Level2>
<Ele2_1>
<Ele2_2>
<Level2a>
<Ele2a_1>
<Ele2a_2>
</Level2a>
</Level2>
</Level1>Hi dineshmale,
I have do this Multilevel hierarchy before. FCC can directly configure this scenario. But I don't know you output format. What my format shown below(here i use '#' instead of space):
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
FCC Parameter:
Recordset Structure: Level1,Level2,Level3
Level1.fieldSeparator = (2 spaces)
Level2.beginSeparator = (some spaces according to the length of the fields in Level1)
Level2.fieldSeparator = (2 spaces)
Level3.beginSeparator = (some spaces according to the length of the fields in Level1and Level2)
Level3.fieldSeparator = (2 spaces)
Level3.endSeparator = \n
There are some points:
1. the endSeparator for Level1 and Level2 doesn't work.
2. the first begin separator in Level2 and Level3 doesn't work.
3. The last field of super node and the first field of child node is separated by the (child).fieldSeparator.
4. ....
What's more, I have write a blog of FCC For Hierarchical Structure in Receiver Channel just now. So it need two days for Approval. Let me know for any issues.
Edited by: guKidd on Dec 14, 2010 7:52 AM
Edited by: guKidd on Dec 14, 2010 7:54 AM -
I'm having problems getting the connector setup software to properly install and configure a machine for connecting to a domain running on a Windows Server 2012 r2 Essentials machine. The machine is a Windows 8.1 Pro laptop. I've successfully setup two other
machines that connect to the domain.
The software runs and prompts for admin user name and password. It then asks about server backup and then completes the setup (successfully according to the setup). The whole process takes less than two minutes and never reboots the machine. The next time
I login into the machine, I'm prompted for my hotmail password (not Ctrl-Alt-Del and domain login). I can access the server and all of the files, but the launchpad and dashboard are not installed. I've searched the Internet for a solution and found nothing.
I downloaded the connector install files from the Microsoft Download Center, but that ran as an update in less than a minute and did nothing.
Anyone run into this? Anyone know of a solution? Help would be much appreciated!Can you share the log files from the client?
Should be under: c:\programdata\microsoft\windows server\logs
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
"Could not find PPPoE server" sudden error on DSL connection
I am having a serious issue I can't seem to solve.
I currently have two laptops running:
One PowerBookG4 running Tiger that stays connected to the internet through a regular DSL modem, and shares the signal through wifi to another laptop, a MacBookPro that connects by airport.
I have had this configuration for two years and never had any problems.
Recently my network service had a shutdown and came back up in a few hours. Ever since then - without ever changing any configurations - the PowerBook continuously gives me the error "Could not find PPPoE server".
But it is not a network problem because when I plug the cable into the MacBook Pro - that has the EXACT same network configurations as the PowerBook - it connects just fine.
My internet provider explained that it could be a configuration problem caused randomly and that I need to fix it, but I have no idea how to do it. Already scanned the disk, repaired permissions, everything seems fine.
My PPPoE username and password are correct.
Will I have to reinstall the system? Any help would be very very appreciated.Hi Fernanda , and a warm welcome to the forums!
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON. So drag Ethernet up there on the PB if it isn't.
I don't think it'll require a reinstall, first let's drag these files to the Desktop, reboot, and setup everything again...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist -
DMVPN Configuration with ASA 5510 In Front of Cisco 877-K9 HUB Router
Hi Guys,
I'm in a mess, I have Cisco 877-K9 router which sits behind an ASA 5510 FW.
The Design :
Cisco 877-K9 DSL router (DSL with Static IP) ( DMVPN HUB )
||
ASA 5510 Firewall (Outside INT with Static IP / Inside INT LAN) (PAT & ACL)
||
Switch
||
LAN
Now my problem is, My Dmvpn configuration works just fine, I'm able to ping from my Cisco 877 to any Spoke & vise versa.
I'm also able to Ping from my LAN to any Spoke Tunnel IP, but Im not able to ping any LAN IP at Spoke site nor am I able to ping my LAN from any Spoke site.
I've googled alot but have come at designs where the ASA's are behind the Cisco Routers and not infront.
Any help in this regards is highly appreciated. I really need this to work. Attached are the config files....
Thanks,
Aj.Thanks to both of you guys for replying. I should've been more descriptive in my initial post, but just thought of getting more ideas.
All the troubleshooting was done before posting the problem, and to clearify the things, Please find below the results.
1) what RProtocol r u using?
a) It's OSPF
2) if ur using OSPF, try show ip route on the hub and spoke to verify the hub/spoke routes are learned via OSPF
a) I did the "show ip route" and bothe the HUB and Spokes get their routes defined
(on the HUB if I used "network 192.9.201.0 255.255.255.0 area 0" I coudln't get routes advertised on spokes)
(I changed to "redistribute static subnests" and I was able to get Hub routes advertised")
3) are your tunnels config correctly? try show crypto ipsec sa
a) They are as they should be and "show crypto ipsec sa" comes up with proper in/out encrypted data
4) on your hub'spoke do a debug ip icmp
a) Did that as well, and If I do a debug on a Spoke and ping from my HUB to that spoke on the tunnel IP, I get proper src/dest results, but If I ping from HUB to Spoke on a client IP behind the Spoke, It pings but does not show any result on the Spoke debug.
I'm able to ping all the Spoke's Tunnel IPs and clients behind the Spokes from the HUB router, but not from either the ASA nor the clients on my LAN.
Additional to the info above, Please also note :
I did notice something that, from my HUB router, which is also my DSL Modem, I'm unable to ping any clients behind the ASA.
So I guess I'm stuck on the point that My Cisco HUB is unable to talk to my LAN, If I can get the HUB to talk to the internal LAN, I would be able to ping clients on LAN from any Spoke or clients behind Spokes.
From HUB router I'm able to ping clients behind Spokes.
Does that give any Ideas ?
Thanks in Advance.
Aj. -
Unable to configure Linksys E2500 to use PPPoE connection
I am using the Ubuntu Linux 12.04 operating system and have been able to use the Linksys E2500 router with Automatic Configuration – DHCP setting and my modem in PPPoE mode to use my DSL connection. But I would like to be able to use my router with the PPPoE connection setting so I can use a firmware like Tomato which has more advanced features like bandwidth logging.
I was able to log into the configuration page of my SpeedTouch ST516 modem and set it to bridge mode according to the instructions here: http://www.speedtouch.ca/bridgemode.php
I then tried to set up the router to use PPPoE according to the instructions here: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687
I get the message "Can not get an IP address from PPPoE" again when I try to set up the connection in step 4. Resetting the router does not help. I also tried running 'sudo service networking restart' and the 'sudo dhclient -r; sudo dhclient' in Ubuntu's terminal but still got the same message.
I double checked that I used right login information and vpi from my ISP. I used the same info to configure the modem to PPPoE mode again so I can connect to the internet. I had to reset the modem back to factory defaults using the reset button at the back to access the modem configuration page after I disconnected the ethernet cable from the router and plugged it into the modem.
Is there a possible bug with using PPPoE with this router? Is there anything else I can try besides what is stated in the instructions linked to above?jaymay
"If you are getting an error "Can't get an IP from PPPoE Server", that would mean that it's possible that the account information you've typed in is incorrect or the modem is not set properly to bridged mode. You can test this by connecting your computer directly to the modem and create a PPPoE dialer. If it will let you connect successfully then you are using the correct username and password. If not then you might have to verify the correct info from your ISP."
> Again, "I double checked that I used right login information and vpi from my ISP. I used the same info to configure the modem to PPPoE mode again so I can connect to the internet." And yes I was also able to connect with a PPPoE dialer and computer directly connected to the modem.
"It could be possible that what you just need to do in the router is to change it's LAN IP address to a different range compared to what you are getting from the modem to avoid IP conflict. For more information about setting up the router with DSL connection, you may refer to this link: Setting up a Linksys router for DSL Internet connection."
> That link is exactly the same link in my sentence: "I then tried to set up the router to use PPPoE according to the instructions here: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687"
The router ip address used is set to http://192.68.2.1 which differs from the ip addresses of the modems I tried. -
Unable to find phone type in CUCM for manual registration
Hi
We are using CUCM 8.0.3 , unable to find Phone type Cisco 8831 for manual registration. How can I add this phone type to CUCM ? Any help is appreciated.Hi there,
+5 to my friends Mahmood & Nadeem here for their good ideas.
The problem here is that there is no Device Pack for CUCM 8.0.3 that supports the 8831 :( The ReadMe below is for the last/latest 8.0.3 device pack;
http://www.cisco.com/web/software/282074299/92918/cmterm-devicepack-8_0_3_24051-1_Readme.pdf
You would need to upgrade CUCM to a minimum of 8.5.1 and then install ;
Cisco Unified Communications Manager 8.5(1.17118-1) Device Package - Compatible UCM Version: 8.5
cmterm-devicepack8.5.1.17121-1.cop.sgn
Cheers!
Rob -
I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express. -
Configuring Cisco ASA for site to site VPN ( Issue with setting up local network)
OK, so our primary firewall is a checkpoint gateway. Behind that we have a cisco ASA for vpn users. I have a project at the moment where we need to connect to another company using site to site VPN through the cisco ASA, as the checkpoint gateway is unable to establish a permanent tunnel with the other companies Cisco ASA.
What would be the best practise for setting up the local network on my side? Create the network on the ASA and then use a L2 vlan to connect to the Core switch?
Setup a L3 interface on the core switch and point it towards the checkpoint gateway which would then point to the ASA?
When you have to select your local network through the site to site wizard do you have to put the inside network address of the ASA?
Our network is setup like this: Access layer switch > Core 6500 Switch > Checkpoint-Firewall > Internet
The ASA is connected to a checkpoint sub interface
Any help would be beneficial as im new to cisco ASAs
Thanks
MarkMark
If we understood more about your environment we might be able to give you better answers. My initial reaction was similar to the suggestion from Michael to use a L2 vlan. But as I think a bit more my attention is drawn to something that you mention in the original post. The ASA is there for VPN users. If the VPN users need to access your internal network then you probably already have something configured on the ASA that allows access to the internal network. Perhaps that same thing might provide access for your site to site VPN?
HTH
Rick -
how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server
Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy . -
Adobe plugin for Outlook in 2013 unable to configure to load at startup
Windows 7 Pro, Office 2013 Home and Business
I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
Any ideas?Hi jeremyh77032804,
Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
Do you have the administrative privileges to this location specified above?
Please let me know.
Regards,
Anubha -
Do i have to configure ssl on cisco unified provisioning manager for it to work
Here is the code
#include <userint.h>
#include "iface.h"
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int write_onoff(uInt8 HL, const char linename[])
int error=0; // error code (initialized to zero i.e. no error)
TaskHandle taskHandle=0; // task ID for DAQmx
char errBuff[2048]={'\0'}; // error message
// DAQmx Configure Code
SetWaitCursor(1);
DAQmxErrChk(DAQmxCreateTask("", &taskHandle));
DAQmxErrChk(DAQmxCreateDOChan(taskHandle, linename, "", DAQmx_Val_ChanPerLine ));
// DAQmx Start Code
DAQmxErrChk(DAQmxStartTask(taskHandle));
// DAQmx Write Code
DAQmxErrChk(DAQmxWriteDigitalU8(taskHandle, 1, 1, 10.0, DAQmx_Val_GroupByChannel, &HL, NULL, NULL));
Error:
SetWaitCursor(0);
if (DAQmxFailed(error)) DAQmxGetExtendedErrorInfo(errBuff, 2048);
if (taskHandle!=0)
// DAQmx Stop Code
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
if (DAQmxFailed(error)) MessagePopup("DAQmx Error", errBuff);
return error;
} // end write_digital_line
int CVICALLBACK test (int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
uInt8 onoff=0;
if (event==EVENT_COMMIT)
GetCtrlVal(panel, control, &onoff);
write_onoff(onoff, "Dev1/port0/line0");
return 0; // return 0 to tell the system the message has been handled -
Configuring Cisco Router for use with Syslog Server
Configuring Cisco Router for use with Syslog Server:
Does anyone know of a good doc for this?
-AshleyStart with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
And if you need more informations, just ask what you want to achieve.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Cisco 2504 Local radius configuration, is their any ways for backing up the user db? In case the WLC dies
Please find the guide to keep the backup:-
http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0/configuration/guide/c70mfw.html#wp1063850 -
Configuring SYNCE/PTP on Cisco 7600 and Cisco MWR for NSN NodeB
Hi to All,
I would to ask for support on how i can establish the PTP between Cisco MWR 2941-DC and a NSN NodeB. The Cisco MWR is connected to a Cisco 7600 with SPA-2X1GE-SYNCE where the SSU/OSN clock is connected on the BITS ports. Hope you can assist me with the configurations.
Thanks,
EugeneDear Genedeath,
I have noticed that you posted this message since last year ..... have you ever been able to solve the case??
I had a glance to the diagram and it looks quite similar to my case.
I need to configure a Cisco MWR2941 for the very first time in order to support SyncE for packet Abis between a NSN FlexyBSC and a NSN BTS.
BTS---------------Gig x/y MWR Gig x/x-----------------------FlexyBSC
I guess the source clock would be provided by BSC...
Can you support me according to your experience ??
thanks and regards!
Mauro
Maybe you are looking for
-
What is the price to upgrade to the new CC version? I can't get any information on anything from Adobe. I am so annoyed with their website, I really have lost interest. I don't use the cloud, and only want to use 1 or 2 of their products. The las
-
Functional area(FKBER( field in the selection screen))
Hi, I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report
-
Excise Group Problm in Number Range
Hi All, I have Created One Excise Group And assigned to One no range. But it is not showing in number range creation ( In SNUM ). My no range object is j_1irg23a1. So pls send your valuable answer...... Thanks And Regards Pradip Pawar
-
Hello All, I´m developing a smartform to print information in a label that has 6cm height. My problem is that when I print the informaton the smartform prints information of the next label on the previous information. It seems that the smartform unde
-
Itunes could not connect to the iPhone "" because of an unknown error occur
New to iTunes and iPhone (3g 8gig black)... Apple store was unable to activate the phone in the store... I installed iTunes today 7.7.0.43 and plugged in phone and got the message: itunes could not connect to the iPhone "" because of an unknown error