Solaris Express 7/05 panic on first boot

Hi all,
I get a panic on my newly installed Solaris Express 7/05:
Booting from grub with multiboot -k -v
(btw, is there a way to log these errors?)
PCI-device: ide@0,ata0
ata0 is /pci@0,0/pci-ide@11,1/ide@0/cmdk@0,0
UltraDMA mode 5 selected
UltraDMA mode 5 selected
cmdk0 at ata0 target 0 lun 0
cmdk0 is /pci@0,0/pci-ide@11,1/ide@0/cmdk@0,0
/kernel/misc/strplumb: undefined symbol 'dl_attach'
/kernel/misc/strplumb: undefined symbol 'dl_phys_addr'
/kernel/misc/strplumb: undefined symbol 'octet_to_hexascii'
/kernel/misc/strplumb: undefined symbol 'dl_bind'
WARNING: mod_load: cannot load module 'strplumb'
WARNING: strplumb: unable to resolve dependency, module 'misc/nfs_dlboot' not found
panic[cpu00]thread=fec1d920: mod_hold_stub: Couldn't load stub module misc/strplumb
fec33c88 geunix:mod_hold_stub+139 (fec0472c, 1, fe8d96)
fec33ca4 unix:stubs_common_code+9 ()
panic: entering debugger (no dump device, continue to reboot)
Welcome to kmdb
[0]>
System specs:
CPU: AMD Athlon XP 1900+
RAM: 1.3g
MB: ASUS A7V333
DISK: 2x Seagate Barracuda 7200.7, 160GB, 8mb cache (UDMA 5)
I can boot with Failsafe, but no multiboot.
What can I do?

Apparently the nfs client module is need for some reason I don't understand (I'm doing a local CD install). Since I installed the SUNWCrnet cluster this kernel module didn't install.
I resolved this by manually installing the SUNWnfsckr from failsafe mode..

Similar Messages

Kernel panic on first boot after 10.6.8 update

Hi,
Here are the fact:
1) I systematically get a kernel panic on first boot after an attempt to update to 10.6.8 (was able to revert to 10.6.7 using Time Machine; now I'm running my tests on a clone). While doing the update, there are NO USB connexion to my laptop, nor ethernet connexion. Only the power cable.
2) I DO NOT use the software Hands Off which is known to cause such an issue
3) I've tested this on two different hard drive (with a clone of my system)
4) I disabled all third app on startup just to be sure this wasn't a conflict problem
5) After a kernel panic, I'm always able to boot in safe mode
6) I did try both the normal update and the combo update (same result)
Now I'm kinda stuck. The next test I'm thinking performing is to update while in safe mode. But I don't know if it will help.
And yes, my permissions are all fine. Any idea how to troubleshoot this? I believe I need to be in 10.6.8 in order to update to Lion?
Many thanks in advance!
Parneix

Hi,
Sorry about that. Below you'll find the log of my latest kernel panic.
I did follow instructions suggested by user "ds store". The only "kext" file that I've got (by running the commands in the Terminal) was related to the software LittleSnitch. I downloaded it again in order to run the uninstaller. I'll try again to update to 10.6.8 under those conditions and report here.
Mon Jul 4 11:00:32 2011
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x57cf1b5a, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x096b8100, ECX: 0x01500000, EDX: 0x00000001
CR2: 0x00000000, EBP: 0x57dd3df8, ESI: 0x00000001, EDI: 0x096b8100
EFL: 0x00010206, EIP: 0x57cf1b5a, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x57dd3be8 : 0x21b837 (0x5dd7fc 0x57dd3c1c 0x223ce1 0x0)
0x57dd3c38 : 0x2abf6a (0x59e3d0 0x57cf1b5a 0xe 0x59e59a)
0x57dd3d18 : 0x2a1a78 (0x57dd3d30 0x10001 0x57dd3df8 0x57cf1b5a)
0x57dd3d28 : 0x57cf1b5a (0xe 0x9790048 0x9790010 0x10)
0x57dd3df8 : 0x57cf1951 (0x96b8100 0x57cf1f64 0x57cf1f5c 0x7d22fc0)
0x57dd3e18 : 0x543f60 (0x96b8100 0x6c03f00 0x1 0x506b76)
0x57dd3e78 : 0x542137 (0x6c03f00 0x96b8100 0x7d28a00 0x9791da0)
0x57dd3f28 : 0x5426e9 (0x6c03f00 0x7d20340 0x0 0x516766)
0x57dd3f78 : 0x5443d5 (0x6c03f00 0x8 0x57dd3fac 0x1)
0x57dd3fc8 : 0x2a179c (0x9773aa0 0x0 0x2a17ab 0x7c1b000)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.iokit.CHUDKernLib(3)@0x57cf0000->0x57cf3fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 54454580752
unloaded kexts:
(none)
loaded kexts:
com.Cycling74.driver.Soundflower          1.5.1 - last loaded 54075922238
com.Logitech.Control Center.HID Driver          3.2.0
at.obdev.nke.LittleSnitch          2.2.05
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.CHUDUtils          3
com.apple.driver.AppleIntelYonahProfile          14
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.iokit.CHUDProf          3
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.driver.AppleMikeyDriver          2.0.5f13
com.apple.driver.AppleHDA          2.0.5f13
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleIntelNehalemProfile          11
com.apple.driver.AirPortBrcm43xx          423.91.27
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.nvenet          2.0.17
com.apple.driver.AppleBacklight          170.0.46
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.GeForce          6.3.6
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleUSBTCButtons          201.6
com.apple.driver.AppleUSBTCKeyEventDriver          201.6
com.apple.driver.AppleUSBTCKeyboard          201.6
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBOHCI          4.2.0
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.12
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.iokit.KLog          2.4.5
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f13
com.apple.iokit.CHUDKernLib          3
com.apple.driver.DspFuncLib          2.0.5f13
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.5f13
com.apple.iokit.IOHDAFamily          2.0.5f13
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.nvidia.nv50hal          6.3.6
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.NVSMU          2.2.7
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.AppleProfileFamily          41
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.AppleUSBMultitouch          207.7
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0

"Don't Panic" paniced on first boot

I thought this was kind of funny, I upgraded to the new kernel (and thus to "Don't Panic") and after a reboot I was greeted with a kernel panic... It was easily solved by defining "rootfstype=" kernel parameter but it was kind of ironic

It is called don't panic, isnt it ? Dont worry
Last edited by Insane-Boy (2007-08-01 14:36:59)

Solaris Express And This Message

I downloaded Solaris Express V10 (2/06), when I booted laptop using Solaris CD1, the process of the setup stuck on this secreen:
SunOS Release 5.11 Version Sun_31 32-bit
Copyright 1983-2005 Sun Microsystems, Inc.Use is subject to license terms
Configuring devices.Is this something related to CD itself ? or something elase ?
Thanks
Then I have been advised to use verbos booting arguments
I inserted the CD1, the GRUB menu is displayed.
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for lx50, v60x and v65x)1- I chose option 1
2- e---for edit, the following text are displayed in the GRUB menu:kernel /boot/multiboot kernel/unix -B install_media=cdrom
module /boot/x86.miniroot3- I chose option 1 as well.
4- I added this:
kernel /boot/multiboot kernel/unix -B install_media=cdrom -v -m verbose
5- The output is long message, the end part of this message is:
ata1 is /pci@0,0 / pci-ide@1f,1 /ide@1
                 Ultra DMA mode 5 selected
                 Ultra DMA mode 2 selected
                 Ultra DMA mode 2 selected
                 Ultra DMA mode 2 selected
Pseudo-device:winlock0
Winlock0 is /pseudo/winlock@06- Screen stuck with this message.

You are still in the middle of an active forum thread
over there.Thanks for jlliagre (Senior Member in the other forum) who used to answer most threads (the one that you pointed).
He (Senior Member) pointed me to another link, which is this :
http://blogs.sun.com/roller/page/dmick?entry=diagnosing_kernel_hangs_panics_with
I thought (not sure) my problem is easier than sinking into the link above (may be CD problem)
Why abandon that one, when you seem to be making progress over there?I am not giving up that one.

Solaris Express Developer Ed. 5/07 boot crashes

* Crash 1:
I successfully installed Solaris Express Developer Ed. 5/07 on a Dell Inspiron 510m laptop, but after rebooting and selecting Solaris Express from the grub boot menu, the screen gets filled with:
Nested trap, calling reset()
Nested trap, calling reset()
.. and the computer reboots.
* Crash 2:
I also successfully installed Solaris Express Developer Ed. 5/07 on a AMD64 3200+, Gigabyte GA-K8N-SLI, but after rebooting and selecting Solaris Express from the grub boot menu, a message like this is shown (for a split second before restarting) if I boot into 32-bit mode or "failsafe mode":
module "ehci" something something, "NULL dereference" something.
If I boot into (default) 64-bit mode, there is another type of crash output that is not possible to read. Looks like some kind of kernel panic.
The only way I get Solaris Express working is by installing it in VMWare, but that is too slow on those two computers.
What to do? Is there anything I could try except running in 32-bit mode?

but installing linux on my computer with two sata
disk teached me to ask carefully from experienced
people before going to insall the OS.
I have
hda1 windows
hdb4 linux ext3
hdb3 linux swap
hdb5 solaris partition (i think)
i'm not sure you can install solaris partition on extended partition?!
usually, we install solaris on a primary partition, and if the first partition of the extended one is FAT32, solaris can mount it
What i am looking to know is, whether any one shared
idea dn experience and screenshot about developing
java applications in solaris.search on netbeans site, there are many screenshots
Also I can not find whether SxDE has Sun N1 grid with
itself or not.
i don't understand what relation you see between java developpment and N1 grid? N1 grid is to deploy apps and/or OS on many machines, isn't it? but i think you can download it on sun site.
hth,
gerard

What is a neat way to delete a stale amavisd pid_file on first boot after panic or power failure?

Lion Mail Server component postfix/smtp 100% reproducible blocks inbound smtp mail delivery on first boot after a panic or power failure.
Error messages from mail.log are like:
postfix/smtp[45785]: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused postfix/smtp[45785]: 2F7131F9A97: to=<[email protected]>, relay=none, delay=76041, delays=76040/0.36/0.05/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused) postfix/error[45790]: 550D61F9A99: to=<[email protected]>, relay=none, delay=76040, delays=76040/0.39/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused) postfix/postscreen[45872]: NOQUEUE: reject: RCPT from [100.200.100.159]:65392: 450 4.3.2 Service currently unavailable; from=<[email protected]>, to=<[email protected]>, proto=ESMTP, helo=<host.domain.tld> /usr/libexec/postfix/greylist.pl[45885]: Temporary message rejection to: <[email protected]> from: <[email protected]> sent from: [100.200.100.159] for: 60 seconds due to greylisting postfix/smtpd[45879]: NOQUEUE: reject: RCPT from host.domain.tld[100.200.100.159]: 450 4.7.1 <[email protected]>: Recipient address rejected: Service is unavailable; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<host.domain.tld>
The issue seems to be related to the amavis content filter due to the connection to port number 10024 and amavisd being configured on that port. Amavis.log:
/usr/bin/amavisd[236]: (!)Net::Server: 2012/07/25-13:38:49 Pid_file already exists for running process (88)... aborting\n\n at line 277 in file /System/Library/Perl/Extras/5.12/Net/Server.pm ... /usr/bin/amavisd[236]: Net::Server: 2012/07/25-13:38:49 Server closing! ...repeating roughly every 10 seconds...
The workaround is to reboot the machine, after the second boot the inbound smtp mail delivery is no longer stuck.
The issue seems to be related to http://serverfault.com/questions/138690/amavisd-net-server-pid-file-already-exis ts-after-system-crash-and-startup
How to permanently fix Apple Mail Server to accept smtp inbound messages on first boot, by removing the left over amavis pid_file from the previous unclean shutdown?

Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932

Solaris express first impressions

Downloaded solaris express on 10/DEC/05 burned to 4 cd's. Did a complete OEM install
Installed 3 times, once with a xircom, 3com and netgear pcmcia cards, no detection of the nics however the pcic slots are detected and show in prtconf -D | grep pcic. Not good
Big show stopper, will not detect the PNY or any other usb memory card the way Solaris 10 picked it up as soon as it was plugged in. Very not good, no way to transfer new drivers w/o burning them to a cd...
It also did not detect the USB mouse the way solaris 10 did both during install and after install.
This is on a Sony VAIO PCG-F480. This seems to be a step backwards where before the only issues were the nic's which I never did get to work and is why I tried the express version.
It did however get the LCD, onboard mouse pad correct which solaris10 also did.

Apparently the nfs client module is need for some reason I don't understand (I'm doing a local CD install). Since I installed the SUNWCrnet cluster this kernel module didn't install.
I resolved this by manually installing the SUNWnfsckr from failsafe mode..

Hi!I'm owner of a MacBook pro 13''.Trying to achieve my first boot of leopard after an issue which a learned that is named kernel panic,I find an error 0x7fff5fc00000 which prevent me by installing MacOs.My guarantee lasts 1 month more.Could anyone help m

You advise me to send MacBook to an apple's service point or is there any way to handle it myself?

A kernel error is often a hardware issue, so, if it's still under warranty, it's best to take it back to Apple or an AASP.
However, there are several issue which aren't clear.
You talk about "first boot of leopard".
If this Mac is 11 months old, it should have come with Snow Leopard already installed, so why is this the first boot? Or are you talking about Leopard (Mac OS X v10.5), not Snow Leopard (v10.6)? If so, booting from earlier versions of Mac OS X is not supported.

Solaris Express, Dev. Edition 2/07 install problem

Im trying to install the solaris express developer edition 2/07 dvd i got in the mail.
Everything goes fine until i have to set up the hard drive for installation. I have two hard drives, 1 SATA (Server 2003), and a 20Gb IDE for this Solaris install.
When i click next to start installing, it drops out with an error against Solaris Software. the error is as follows:
ERROR: Could not create Fdisk partition table.
ERROR: Could not label disks
ERROR: Could not update disks with new configuration
ERROR: System installation failed
Pfinstall failed. Exit stat = java.lang.UNIXProcess@2af0812
sing existing Solaris fdisk partition (c2d1)
Im not a nub to linux but i have never used solaris and its been a few years since i've touched it - but im familiar with console.
Any help would be greatly appreciated. =D

You do not supply more comprehensive info on Your hardware. Therefore I would like to suggest quite conservative approach.
1. First of all it will be helpful to get from SUN's website the "Install check tool". It is an image (bootable CD) of diagnostic soft.
2. Disable in Bios the SATA disk.
3. Boot the computer with "Install_check_tool" CD inserted into the drive. I hope that this diagnostics will be OK.
4. Restart the computer and start Solaris installation. You can perform this step directly after step no. 2. Now Bios will see only IDE disc and installation should proceed OK. If not - supply more info on Your hardware and resulting (in this situation) diagnostics.
Good luck!

Solaris Express installation experience

Hi folk,
I want to add to my previous post about not getting the graphical installer to work at all due to the notorious
nVidia bug in Xorg.
I have now tried the console install thats supplied as a backup method in Express.
I got through all the sections, installed everything and then got an error that it could not install
the boot blocks, and attempting to boot gives a Bad PBR error.
My first attempt at installing in this manner was to have a drive split between Windows and Solaris, and with this error, I thought.. OK, I'll dedicate the entire drive to Solaris and try installing again.. this i did, but the same error
continued to haunt me.
No matter what I did, it cannot install to the boot block and thus renders Solaris Express useless to me.
system specs:
AMD64 on nForce4 Ultra motherboard
2 Gigs physical DDR400 memory
256MB Legend GeForce 6800GS Video
1x IDE 320GB Seagate Harddrive ( This was to be the Solaris drive, and is first on the list in BIOS )
1x SATA 180GB Hitachi Harddrive ( Windows XP Pro boot drive )
1x SATA 250GB Hitachi Harddrive
If there is any more information that I can give that may help, please dont hesitate to ask.

I found some time ago this:
http://www.webservertalk.com/message1607925.html
and this:
http://www.opensolaris.org/jive/thread.jspa?threadID=29846
Maybe they'll be helpful.
Rev

Solaris Express Developer x86 -- only 64-bit?

Hi, people, glad to be back. Just downloaded Solaris Express Developer edition x86 and installed -- almost with no problems.
It's a system with Intel Celeron D with 64-bit and Hyper Threading support, DDR2 1Gb.
Now running Solaris I noticed it's a 64-bit version, not 32-bit, as I meant to have. The command `isainfo -n` gives back ... "amd64"!
Is there a 32-bit version of Solaris Express DE x86?
Or maybe I need not worry at all and keep running the 64-bit one (actually, I've got no problem as yet)?
Thanks in advance for any comments.

So, my system supports 64-bit computing after all. I
never thought about it, in fact.
But does it mean Solaris Express DE x86 runs as
64-bit on the systems supporting 64-bit, and as
32-bit on 32-bit-only systems?Yes, that's correct. Solaris 10 was the first version of Solaris to support 64 bit operation on the x86 architecture.
It and later versions (including Solaris Express DE x86) should automatically detect the architecture and run in that mode at boot time. There are some ways to force it to run in 32 bit mode only if necessary, but that would be unusual.
Darren

Solaris Express Site?

What's with Sun's Solaris Express download site? It's been down for "maintenance" for the last three days.

I was able to get networking to partially work with a similar setup, no DNS yet.
VMWare configured for Bridged, VMWare Tools installed. Mistake I made was booting the first time without checking that VMWare was set to Bridged and not NAT.
ifconfig -a plumbfound a pcn0 device and then
ifconfig pcn0 up
ifconfig pcn0 dhcpGot an IP address.
I can now SSH to my linux host from Solaris but no DNS and the gnome network administration tool keeps having a problem with the "backend script" it is trying to run. Back to Solaris 10 reference book I go.

Kernal Panic early in boot up.

Got myself a brand spankin new MBP 15in 2.4 the other day!
But, first time bootin the sucker up, got a kernal panic not 2 seconds into boot. Didn't even get past the white screen with the apple logo. Hm... Not a good sign... Especially when you're booting it up for the first time at the apple store
Ok, shut down, boot up again. Oh! Kernal panick again. Hmmmm... Shut down, boot up. No problems this time.
So I thought, well, I guess that's that.
Then just last night, tried booting up again, got the same kernal panic at early boot.
So I figure it's probably only when the computer is cold booting. Which seems to me like it would be some kind of hardware issue.
Good thing for me I got AppleCare after learning my lesson with a harddrive on a powerbook but I wanted to see what everyone else thinks of this just for my knowledge.
Laptop is sitting in my car right now, off, hopefully cold enough so that when I go to the Apple store later today it'll panic for the nice guys at the store.
By the way, this is the first product I got with AppleCare, am I supposed to set up some kind of appt. with them or can I just show up?
Message was edited by: Musashi Strebe

Well, I took it back to the store to get it exchanged, but they decided to run an Airport upgrade that apparently isn't released through software update... AirportExtremeUpdate2007004.dmg is the file.
So far, no kernal panics... and it's been 2 weeks. Granted, I don't shut down my computer often now that I've completely transferred from my old powerbook.
The laptop does freeze occasionally coming out of sleep, I don't think it's a related issue, but I'll search on it anyway.

First boot of local zone - how to determine when sysidtool has finished

Hello,
we use a /etc/sysidcfg in order to do the solaris base configuration automatically. After the first boot of a local zone I recognized that some tools are started by solaris (sysidtool, etc.) which apply the settings mentioned in /etc/sysconfig.
Since we want to script some post-install set-ups I need to know, when the first boot including all "first-boot-scripts" has completely finished. Is it possible to query this information, maybe by calliing a special tool or by looking up some string within an logfile?
I would be grateful for any hints,
Thomas

I haven't checked, but I assume they have normal dependencies in the SMF tree so that other services don't start until they complete.
I would probably look at the milestone/multi-user-server service and see if it's online yet. If it is, they're probably done.
Darren

GIMP on Solaris Express CD Set

Hello Ladies and Gentlemen,
I want to run newer version of GIMP preferably at least 2.4. My current Solaris version is Solaris 10, Jan 2005 version. I ordered Solaris Express 11 x86 core and, 6 CD set since I was not looking forward to download free GTK libs to set up a local build environment for GIMP since it would take at least an entire day to get GIMP working using my dial up modem.
I have several questions about Solaris Express 11x86 OS/Application Set
1. Does it still use familiar GRUB 0.9X as boot loader? I am not familiar with GRUB 2.x
2. Would my old Star Office 8 install on Solaris Express 11x86 OS
3. Would the new version of GIMP comes with Solaris Express 11x86 would install on old
Solaris 10 of January 2005 version?
4. Since Graphics and Audio editing programmes runs better when swap and /tmp slices on the
second physical disk. Can I at least make Solaris 10 and Solaris Express share these
spaces ? I give 12GB for /usr 16GB for /opt and 4GB for / and 16GB for /export/home on
one primary partition on fist disk and /tmp and swap on another 4 GB primary partition on the
second disk.
I would appreciate yourkind advice and time.
Pinecloud
Dell Dimension
Intel Dual Core 3GHz
2GB Memory
SATA II Western Digital VelociRaptor 300GB x 2
Philips DVD/CD Writer
nvidia GE Force 6600GT
Sound Blaster Audigy emu 10K1
3M USB Dial-up Modem

Hi,
I think that you should take a look on [http://www.blastwave.org|blastwave.org] and search for pkg-get utility. It's similar to apt-get (solve dependencies). And I believe they should have a newer version of gimp. I have been using this repository a lot when I was using Solaris 10.
It won't mess up your old libs &etc. Everything is installed into /opt/csw.
HTH
Best regards
Lubos Kocman
[email protected]
Edited by: setuid.h on 11.1.2009 12:41

Solaris Express 7/05 panic on first boot

Similar Messages

Maybe you are looking for