Solaris hosts modify pwdLastAuthTime, Linux hosts do not

I'm trying to debug how Linux hosts bind against my Sun Java Directory Server (6.3).
I would eventually like to collect information on the last time someone authenticated. This isn't perfect, as there's no way to see if someones logging in using an authorized SSH key, but at least I could start to get something.
When I log into solaris hosts with a password, this pwdLastAuthTime updates. When I log into RHEL5 hosts, it does not.
man pam_ldap says:
"To authenticate a user, pam_ldap attempts to bind to the directory server using the distinguished name of the user (retrieved previously)."
So, in theory, the pwdLastAuthTime should be updating as such, no? No name caching is enabled on the machine in question.

Are we talking about the same user in both cases? Are you able to check if the BIND operation in the access log is actually for the user and not the proxyagent (or equiv in Redhat)?

Similar Messages

Host Configuration not found error in database control

I have freshly installed Oracle DB 11g and a starter database.
Then i went to emctl (database control), at the home tab, I noticed the status is up (Green up arrow icon) but the "Instance Name", "Version", "Up Until" entries have the value "unknown"
And then when i Click on the "view all properties link", I noticed that the ORACLE_HOME entry has a warning icon after the entry. Then when you click on the ORACLE_HOME entry link, I get a page saying
Host Configuration not found. Check to see if the target exists.Whats happening? Did I miss something in my installation?
regards,
Anton

What is the OS?. Have you seen the Metalink note: 353681.1
Subject: Problem: Click on ORACLE_HOME gets "Host Configuration not found. Check to see if the target exists"
Doc ID: 353681.1 Type: PROBLEM
Modified Date : 30-JUL-2007 Status: PUBLISHED

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

HOST command not working

Oracle AS Version 10.1.2.0.2, Oracle Forms Version 10.1.2.0.2, Windows XP.
I am using HOST command to read a files from the directory (on the server). But HOST does not working. When i click the button to read the file, it just hangs on and no error on the console.
Does host work on forms 10g?
actually i was using client_host of webutil and its working fine. But it pick the directory from the client. Whereas i need to pick it from the server where AS is. That why i went for HOST command.
Any suggestion.

Hi,
Try this.
1. Create a batch file (which would first set the required variables as when you do the "set".)
2. Add the following to the batch file.
C:\javasoft10g\jre\bin\javaw -classpath C:\javasoft10g\jre\lib\rt.jar;C:\javasoft10g\paths;;C:\javasoft10g\paths\dusjava.jar; %1 %2 %3 %4 %5 %6 %7Save the batch file in some location (say c:\mybatchscript.bat).
From forms, call it like
host('cmd /c c:\mybatchscript.bat > c:\temp\testlog.log' );Now, does it work?
-Arun
P.S : Looks to me like, you are setting some variables (or calling another batch file - set , which sets up the variables). So, make sure you set all the required variables in the batch script itself.
-Arun

Ora-12545 connect failed because target host does not exist(plsql develper)

Hi,
I am using Oracle 10g version, and i am using plsql developer.
I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like:
ora-12545 connect failed because target host does not exist
I have not done any changes in setting though i am getting this problem, earlier i was able to work with plsql developer very good.
I am sending the TNS file for your reference.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vnod-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please help me in this.
Thanks,
Vinod

910575 wrote:
Hi,
I am using Oracle 10g version, and i am using plsql developer.There are numerous products with similar names.
Which vendor provides your software & which version of the software do you have?
Is the Oracle database server system installed on the same system as your client software?
post results from following SQL
SELECT * FROM V$VERSION;
Handle:     910575
Email:     [email protected]
Status Level:     Newbie
Registered:     Jan 26, 2012
Total Posts:     42
Total Questions:     20 (18 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on May 18, 2012 9:30 PM

SAP Router - Host did not respond 8 times

Guys,
I'm able to test OSS connection successfully in SM59. But in service connections, whenever i open connections, the connection failing to open with the "Host did not respond 8 times " error before changing to Cancel. Any suggestions please?

There was a little glitch in the saprouttab file, which i fixed. But interesting to note that it didn't clear the error. I keep having the same error, but SAP was able to connect inspite of that. As i read elsewhere, often times this error is misleading. anyway, thanks.

RD session host is not detecting the license

My RD session hosts are not able to recognize the RDS CALs. Here is my setup:
License Server :
Windows 2012 Server (workgroup), running on Amazon cloud
No. of license: 20
License activation is done.
RD session host server:
Windows 2008 R2 (workgroup), running on Amazon cloud
Can connect to license server on port 135
License server is added in the RD session host
Licensing Diagnosis under RD session host detects the License server fine and give positive report. (Screenshot attached)
Few other settings:
These are user based CALs.
Firewall is disabled on the license server
As this is in workgroup, the Administrator's password on license server and on RD session host server is same. (else the license diagnosis will fail).
ISSUE:
Even though RD session host is detecting the license server fine as well as the licensing diagnosis gives a positive report, I get the typical balloon pop up saying "RDP connection will be lost after 119 days... " (the typical message it shows
when you do not have RD session host license.)
What Am I missing here. Any pointers would of great help.

Hi,
Thank you for posting in Windows Server Forum.
You need to contact MS Clearinghouse with you all license related documents and numbers with all paper in hand and explain them the scenario they will help you. Below links helps to locate the MS clearing house.
Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
More information:
Switching Between Device and User CALs
This statement “RDS Host and RDS licensing server roles can both be installed on the same server” indicates that you can install RDSH and RDLS on same server. In addition, RDS server 2012 required RD Licensing Server 2012. But
yes, you can install server 2012 RD Licensing Server and associate your RDS CAL’s on it and let’s your RD Session Host server works on server 2008 R2.
Hope it helps!
Thanks.
Dharmesh Solanki

Error message: $host does not have a method 'resetDataPermsCheck'

LiveCycle Designer 8.05.
I am trying to reset the data in a subform. It is working great in certain subforms in my form. However, some of the code is as follows:
if (form1.P1.docSF.new_revision.rawValue == "0") {
// do something
} else {
xfa.host.resetData("form1.P1.newdoc_numberSF");
With this code, I receive an error (in the Warnings panel) that says "$host does not have a method 'resetDataPermsCheck'", yet the subform fields still reset properly. If I move the "xfa.host.resetData..." line out of the "else" section into the "if" section, the error message goes away.
Any idea what might be going on?

Welcome to the forum.
Could someone point to the cause of the error.Could you please mention the complete error message ( the ORA-xxxxx code ) and your database version ( the result of: select * from v$version; )

Host did not respond error in connecting the SAP Router from SERVICE PLACE

Dear Sir,
We renew the Router Certificate by October 2008. We are using broadband connection in our office with firewall (ISA) .
When we try to connect the sap router from SAP Service Market Place, It is connected and after some time, status is changing to Host did not respond due to timeout.
We checked the SAP Router Tab File also. It is correct. Guide us to solve this issue
With Regards
K.Natarajan

Hi
This type of error occurs maximum,only when there is no proper connection between the systems.So,my suggestion is to check with the connection between the systems with the help of Basis person.
regards
krishna

Help with Error: $host does not have a method 'messageBox'

Greetings Everyone:
I get this error in my Log window:
Error: $host does not have a method 'messageBox'
I'm calling xfa.host.messageBox("MyMessage") from form's initialize event.
What am I doing wroing?
Acrobat Pro 9 - Java Script is enabled.
Thanks in advance,
iL

Hi Steve:
Thanks for your prompt responses. I appreicate that. I got the latest version.
I'm OT on at home looking for more answers...I'm guessing it's an installation issue...
I even tried console.println("Message"); CTRL + J and blank. I did this on Acrobat and LC.
I'm gonna do a full unistnall and reinstall when I get back to office.
The software is coming from our IS dept so I know it's squeaky clean.
I did an Installer Repair but the problem has returned.
I also can't use/access any xfa.layout memebers....
I get this errors even on newly created forms...it hasn't crashed again so I can't get any bucket ID log yet.
Here's whats on my office box that giving me grief:
LC version 8.2.1.4029.1.523496
Acrobat Pro 9
Java Version 6 Update 15
OS Platform: (HP Box)
SQL Server 2008 Express (HotFix installed)
VS2008,Office2k7.
XP SP3
iL

Re: Error: $host does not have a method 'messageBox'

Hello Experts:
I'm experiencing strange behavior on my LC Designer ES application.
I recieve a warning and my console window (ctrl+j) doesn't show up nor does the message box.
I cannot see xfa.layout members on the object drop-down menu. I have re-installed to no avail.
This occurs on every all forms. The default script is set to JavaScript.
Can anyone explain this behavior. Is it an installation issue?
Thank you for your time, iL.
Log:
Generating PDF Document...
Script failed (language is javascript; context is xfa[0].form[0].form1[0])
script = xfa.host.messageBox("My Message");
Error: $host does not have a method 'messageBox'
PDF generated successfully.
Script:
form1::initialize - (JavaScript, client)
xfa.host.messageBox("My Message");
System Info:
LC version 8.2.1.4029.1.523496
Acrobat Pro 9
Java Version 6 Update 15
SQL Server 2008 Express (HotFix installed)
XP SP3, Office 2k7

Hi Steve:
Thanks for your prompt responses. I appreicate that. I got the latest version.
I'm OT on at home looking for more answers...I'm guessing it's an installation issue...
I even tried console.println("Message"); CTRL + J and blank. I did this on Acrobat and LC.
I'm gonna do a full unistnall and reinstall when I get back to office.
The software is coming from our IS dept so I know it's squeaky clean.
I did an Installer Repair but the problem has returned.
I also can't use/access any xfa.layout memebers....
I get this errors even on newly created forms...it hasn't crashed again so I can't get any bucket ID log yet.
Here's whats on my office box that giving me grief:
LC version 8.2.1.4029.1.523496
Acrobat Pro 9
Java Version 6 Update 15
OS Platform: (HP Box)
SQL Server 2008 Express (HotFix installed)
VS2008,Office2k7.
XP SP3
iL

SAPRouter Status : Host did not respond

Hi,
When I try to open service connections some times I get it connected.
But some times I get this message( Host did not respond ) with a warning sign on it.
Please suggest what could be the problem?
And why it is just a warning?
Thanks & Regards
Mrutyunjay

Hi Juan / Wolfgang,
Very much thankful for your time.
Sorry for delayed response.
I get connected to the sapserv2.. for some time the status remains connected.. and when i refresh it after some time it changes to "Host did not respond" ...
If it is timeout it should not connect at all..
Even though the status is Host did not respond still SAP is able to connect and work.
Wolfgang : I will go through the note and will come back to you.
Thanks & Regards
Mrutyunjay

Saprouter - Host did not respond times

Hello,
We have configured the saprouter with a VPN, the test connection in SM59 is OK.
When I try to start "R/3 Support" in SAP Support Portal, the SAP Service Connector gives me the message: "The service connection has been opened successfully." but SAPRouter status does not get "connect", it keeps on "Host did not respond x times".
How can I find the problem? If the SAP Connector shows me "The service connection has been opened successfully."?
Regards

Hi Richard
1. Is it new SAProuter installed or already working one?
2. In which OS? could you refer the SAP links
Installing the SAProuter - SAProuter - SAP Library
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c06c8846-c160-2d10-d18e-d9961e9c7219?QuickLink=index&…
BR
SS

Solaris hosts modify pwdLastAuthTime, Linux hosts do not

Similar Messages

Maybe you are looking for