SolMan 4.0 - SCS instance allocates wrong ports

Hello,
we have a solution manager 4.0 installation on IBM iSeries (System i / AS 400).
Kernel is 700 with patch lvl 92/dbsl patch 70.
Central instance is number 50, scs instance is 51.
The system is running in so far that I can logon to it and transaction SICK reports no errors.
Examining the system more accurately revealed that the j2ee server is configured but not operational (transaction SMICM).
Looking at the running jobs, i see that jcontrol, msg_server and server0 are not running.
The developer trace of dev_ms of the central instance shows errors:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:28:07 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2547
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2547) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3173]
[Thr 1] *** ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 5
    (SI_EPORT_INUSE/67; I4; ST) [nixxi.cpp    3173]
[Thr 1] *** ERROR => MsSCommInit: NiBufListen(sapmsS01) (rc=NIESERV_USED) [msxxserv_mt. 10124]
[Thr 1] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1857]
[Thr 1] *** ERROR => main: MsSInit [msxxserv_mt. 5896]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2547) [msxxserv_mt. 5944]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The trace dev_ms of the scs instance is ok, but with wrong ports in my discretion:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:27:18 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2535
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2535) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/S01/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [192.2.1.15] VERSAP01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 1]   3 : [192.2.1.183] 192.2.1.183 (NILIST)
[Thr 1]   4 : [194.221.94.253] SAPROUTER (NILIST)
[Thr 1]   5 : [192.2.1.185] 192.2.1.185 (NILIST)
[Thr 1]   6 : [192.2.1.186] 192.2.1.186 (NILIST)
[Thr 1]   7 : [192.2.1.187] 192.2.1.187 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = VERSAP01.KVN.DE
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = KVN.DE
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsS01 (3650) ***
[Thr 1] *** I listen to internal port 3950 (3950) ***
[Thr 1] CUSTOMER KEY: >E1363402629<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The profile default.pfl looks good to me:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SAPDBHOST = VERSAP01
j2ee/dbtype = db4
j2ee/dbname = S01
j2ee/dbhost = VERSAP01
SAPSYSTEMNAME = S01
SAPGLOBALHOST = VERSAP01
j2ee/scs/host = VERSAP01
j2ee/scs/system = 51
j2ee/ms/port = 3951
rdisp/bufrefmode = sendoff,exeoff
DIR_PUT = /usr/sap/S01/put
rdisp/mshost = VERSAP01
rdisp/msserv = sapmsS01
rdisp/msserv_internal = 3950
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Any idea ?
Is anything wrong with our configuration(which we did not change manually) ?
Do we have to patch the kernel ?
Best regards,
Juergen Scheckelhoff

Hello Mr.Hermsen,
some profile parameters were set wrong by the installation routines.
SAP send me some reference profiles from a running solution manager installation and I synchronized our profiles accordingly.
I cannot remember exactly which parameters were wrong, but i guess it was one of the port numbers.
Good luck and best regards,
Jürgen Scheckelhoff
Here are the profiles sent to me from SAP:
........1........2........3........4........5........6........7.......
***********Beginning of data*************
#.*       Default profile DEFAULT.PFL
#.*       Version                 = 000002
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:33:12
SAPSYSTEMNAME = SSM
SAPGLOBALHOST = as0015
SAPDBHOST = as0015
j2ee/dbtype = db4
j2ee/dbname = SSM
j2ee/dbname = SSM
j2ee/dbhost = as0015
DIR_PUT = /usr/sap/SSM/put
1. SAP Central Service Instance for J2EE
j2ee/scs/host = as0015
j2ee/scs/system = 11
j2ee/ms/port = 3911
rdisp/bufrefmode = sendoff,exeoff
1. SAP Messaging Service for ABAP
........1........2........3........4........5........6........7.......
rdisp/mshost = as0015
rdisp/msserv = sapmsSSM
rdisp/msserv_internal = 3910
1. Login Client
login/system_client = 001
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Instance profile SSM_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:34:08
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 3
1. Number of work processes
rdisp/wp_no_dia = 4
rdisp/wp_no_btc = 2
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
1. ABAP parameters
ztta/roll_extension = 2000000000
#CL: reduced initial memory size to save resources. Increase if necessary
#em/initial_size_MB = 4096
em/initial_size_MB = 2048
abap/buffersize = 600000
zcsa/table_buffer_area = 64000000
rsdb/cua/buffersize = 16383
rtbb/buffer_length = 16383
rtbb/max_tables = 500
#RV: Sollte beim Einspielen von grossen Hopa Queues aktiviert werden
#rdisp/max_wprun_time = 0
1. Language
zcsa/system_language = E
zcsa/installed_languages = DE
1. ICM parameters
icm/server_port_0 = PROT=HTTP,PORT=80$$
1. Java parameters
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /QIBM/ProdData/Java400/jdk14
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_prope
j2ee/dbdriver = /usr/sap/SSM/SYS/jdbc/tbx/jt400.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
ms/server_port_0 = PROT=HTTP,PORT=81$$
j2ee/instance_id = ID1053262
#CL: Keep properties file, if some vm params need to be set differently than def
java/as4/keep_props = 1
1. Solman Konfiguration lt. IMG
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = as0015.wdf.sap.corp
icm/host_name_full = as0015.wdf.sap.corp
icm/server_port_1 = 25000
login/no_automatic_user_sapstar = 0
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
........1........2........3........4........5........6........7........
***********Beginning of data*************
#.*       Instance profile SSM_SCS11_AS0015
#.*       Version                 = 000001
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:35:40
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 1
1. SAP Messaging Service for Java
rdisp/msserv = 0
rdisp/msserv_internal = 3911
ms/standalone = 1
ms/server_port_0 = PROT=HTTP,PORT=81$$
1. SAP Locking Service
enque/serverinst = 11
enque/table_size = 4096
rdisp/enqname = $(rdisp/myname)
enque/snapshot_pck_ids = 100
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:37:38
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_DVEBMGS10_as0015
1. Trace level
rdisp/TRACE = 3
service/trace = 3
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Execute_01 = local CLRLIB LIB(R3WRK10)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
Execute_03 = local $(DIR_EXECUTABLE)/saposcol
Execute_04 = local $(DIR_EXECUTABLE)/DLTOLDPKGS SSM
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start application server
DW = $(DIREXECUTABLE)/disp+work$(FT_EXE)
Start_Program_01 = local $(_DW) pf=$(_PF)
1. Start syslog collector daemon
CO = $(DIREXECUTABLE)/rslgcoll
Start_Program_02 = local $(_CO) pf=$(_PF) -F
1. Start syslog send daemon
SE = $(DIREXECUTABLE)/rslgsend
Start_Program_03 = local $(_SE) pf=$(_PF) -F
1. Start internet graphics server
IG = $(DIREXECUTABLE)/igswd_mt
Start_Program_04 = local $(_IG) -mode=profile pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK10)
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_SCS11_AS0015
#.*       Version                 = 000003
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:39:04
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_SCS11_as0015
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Execute_01 = local CLRLIB LIB(R3WRK11)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start SAP locking service
EN = $(DIREXECUTABLE)/enserver$(FT_EXE)
Start_Program_01 = local $(_EN) pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK11)
***********End of Data*******************

Similar Messages

Java is not coming up because of wrong port configuration

Hello guys
It is a ABAP+ JAVA system ,ABAP is system is up but java is not coming up because of wrong port configuration.
getting error as ....service could not start because of missing or wrong port configuration
also tell me how to change this parameter in configtool??
com.sap.aii.connect.integrationserver.r3.mshost

Hi,
Please attach std_server0.out file too. Also, on the Abap side, ensure the HTTP port is set. This can checked by tcode smicm->Goto-> Services. The HTTP entry must be enabled and the port number should be displayed.
If it isnt enabled, then activate the http port in the instance profile using RZ10 Tcode.
Also, AFAIK, the parameter com.sap.aii.connect.integrationserver.r3.mshost is maintained in the exchange profile.
Rgds,
Soujanya

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Apple's Firewall opens the wrong ports!

This is a follow up question to a problem posted in another forum here. There are a couple of screenshots in the last post that illustrate the problem.
In System Preferences > Sharing > Firewall, checking Apple Remote Desktop opens TCP and UDP ports 3238. The problem is that Apple Remote Desktop needs ports 3283 (not 3238 - note the last two digits are transposed) and 5900. I've already worked around this issue by creating a new firewall entry that opens the correct ports, but I'd really like to get my Sharing Preferences corrected. Plus it bothers me that I can't block port 3238 by unchecking Apple Remote Desktop since that will prevent ARD from working, even though it opens the wrong ports.
This isn't really an Apple Remote Desktop problem, it's something wrong with the firewall in this system's version of OS X. Any idea how I can fix it, other than the ugly workaround I'm using, and short of reinstalling OS X?

Editing the .plist file is easy with xcode's Property List Editor, which I just installed. However, before I did that I simply copied a "correct" /Library/Preferences/com.apple.sharing.firewall.plist file from another computer. That was even easier

Integration server wrong port number

Hi All, Suddenly from yesterday in our production PI server some setting has got changed. Files are not reaching Integration server. On investigation found out wrong port # is appearning. In RWB,Component Monitoring>Integration Engine XPI> Test Message tab, i see Send Message to: Http://<servername>:<wrong port #>/sap/xi/engine?type=entry.
I checked in xsmb_admin-->Integration Engine Configuration, there i see the correct port(8002). Not sure why the same port is not appearning the Test Message Tab.
For testing purpose i changed from 5000 to 8002 and test the message in the Test Message tab and processed. If i have 5000 then i get the below error message:
Transmitting the message to endpoint http://<server>:5000/sap/xi/engine/entry?action=execute using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: A remote host refused on attempted connect operation.
Can you someone throw some light on this issue? This is a production issue.
Thanks,

Hi,
Also check integration server URL (Pipeline URL) is correctly maintained in the Business System for the Integration Server in the SLD.
HTTP port you can also check on Abap stack SMICM -> Servicies option.
--Divyesh

Install BW7 ABAP+JAVA, why is SCS instance nr set to 00?

Hi,
we are trying to install BW7 ABAP+JAVA, and SAPinst defaulted the SCS instance nr to be 00, and the CI nr to be 01. We cannot change this values from the SAPinst screen. We want CI to be 00 and SCS to be 01. Anyway to do this? Thanks.

You could try putting a dummy sapmsXXX and dummy SCS profile in /sapmnt/<other_sid>/profile to fool SAPINST into thinking there's already an instance running on sysnr 00.
Why do you want to reverse the SCS and CI instance numbers though?
Rich

SCS instance in AS (ABAP+JAVA) / AS JAVA system

Hello,
Can somebody pl. tell me what is function of SCS instance in NW04s.
It contains message and enqeue services
But another instance also has message and enqueue services for the same istance.
Thanks in advance.
Regards,
Tushar Chavan

Hello Tushar ,
The Central Services form the basis of communication and synchronization for the Java cluster.
The Message Service keeps a list of the dispatchers and server processes of the Java cluster. It represents the infrastructure for data exchange (small datasets only) between the participating nodes. The message service also supplies information to the SAP Web Dispatcher about Load Balancing Between Many Java Instances.
The Enqueue Service manages logical database locks, which are set by the executed application program in a server process. The enqueue service also synchronizes data across the cluster.
Integration
Central Services are always required when a Java cluster is installed. They are started on a server with their own system number and the system ID (SID) of the whole system.
Hope this will help you to understand .
Regards,
Santosh

Wrong port on links gen. by jpf (wlw-runtime-config.xml)

Hello,
          I am working on WLS 8.1 SP2(SP3) and developing the app with workshop. I use i-planet as webserver and 2 managed server as cluster for wls.
          By Accessing the application, all links created by java page flow, have the name of iplanet server, but they have a wrong port and use http instead of https!
          for example:
          accessing with https:\\wip:5683\mpweb
          brings jpf to link to http:\\wip:7001\mpweb
          Defining port,server and protocol in wlw-runtime-config.xml do not have any effect. The same by using wlw-config.xml.
          Do someone have any idea ?
          Thx.

Hi All,
I am using the Bea Application server 10.0.MP1 and want to start the respective app servers using nohup ./startWeblogic.sh.
However every time I use the nuhup.out command, it complains with the error:
<Jul 19, 2011 2:01:53 AM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitial
izationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<Jul 19, 2011 2:01:53 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jul 19, 2011 2:01:53 AM CDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jul 19, 2011 2:01:53 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
I have been reading your threads and have created the boot.properties file. I have placed in the following directory:
- /tezaam/apps/bea/user_projects/domains/xxx_domain/security
The boot.properties file contains two lines:
username=weblogic
password=weblogic
Question: Is is in the correct directory path or should it reside elsewhere as I am not using a nodemanager and start each AdminServer on its own.
Appreciate feedback.
Thanks
Tony

Re: Running weblogic multiple instances on different ports

Hi,
I am planning to run multiple weblogic instances on different ports on the
same machine.
Is it possible ? If so, how ?
Details:
I am using IIS on the same machine. I am currently running weblogic on
7001 and 7002(ssl).
I dont how to run multiple instances. Please help me or guide me where I
can get documentation.
These two instances have to refer two different set of code bases ...
Please point me where I can more details.
Thanks in advance.
Sreedhar V

Is it possible for the two instances on the same machine to participate in
the same cluster? I believe servers in a cluster must share the same port
(which is also used for multicasting). Does a virtual IP address need to be
configured?
"Per Jessen" <[email protected]> wrote in message
news:[email protected]..
>
>
Sreedhar Vankayala wrote:
Hi,
I am planning to run multiple weblogic instances on different ports on
the
same machine. Is it possible ? If so, how ?Assuming you are using WLS6.x, simply define as many servers as needed andgive
them different ports to listen to. This is easily accomplished using theWLS
Admin Console.
Then start individual weblogic processes using this config file.
regards,
Per Jessen, Zurich.

Library shows wrong ports when using external MIDI

Whenever I start a new project and choose an external midi track the library displays the wrong ports. I have an Axiom 25, Motif XS6, and a Kurzweil through an Ultralite. The Axiom and Ultralite show correctly but the MOTIF (which has 3 ports) are all under the Axiom Port 1 listing. Any ideas on how to reset the library so it displays the correct ports.

I found the answer: The Axiom was listed in the default evnironment. when clicking on one of the wayward axioms that appeared in the library it actually produced the right port in the midi track. Then looking at the environment I found that it had produced another axiom with the yamaha port. By clicking on all four axioms in the library I was able to go to the environment and change the name to the proper Yamaha port. They then appeared in the library correctly.
The secret was setting up the environment correctly.

SCS Instance - enque/table_size

Hi all,
We need to adjust the parameter enque/table_size in our J2EE system. How can we define it in the SCS instance? We have already adjusted the parameter for the ABAP stack in RZ10. We have yet to adjust the parameter for the JAVA stack? How can we do this? Are we on the right track in SCS, or can we use exchange profile for this?
Much appreciated, Thanks!

Hello,
Do you mean that after changing the profile by editing the file and make a system restart the values of the profile file have been changed? Can you please then check the name of the profile and be sure that from RZ10 you did not change and activate that same profile?
Regards,
Blanca

SCS instance installation on CI host or DB host

Hi,
We are installaing NW2004s installation (XI) on different systems on windows 2003. CI on differnet system DB on different system. Now my question is where to install SCS instance . On CI host or DB host.
SCS is must on Windows environment.
Please sugegst.
Thanks
Lisa

This is a duplicate post. Please see the discussion in the threads:
NW2004s SCS instance installation
SCS instance install on windows

Sapinst.exe SAPINST_USE_HOSTNAME= virtual hostname of (A)SCS instance

Hi all,
For starting installation on HA systems with following command INST_USE_HOSTNAME=<virtual hostname of (A)SCS instance>
<virtual hostname of (A)SCS instance> points to SAP<SID> or GPSYSTEM ?
GPSYSTEM is name of virtual host created during MSCS , or SAP<SID> which is created for A(SCS)..
Which is used for starting , However i have started with GPSYSTEM, resulting in some issues, therefore is suspect. Please advice.
Thanks,
Rahul

This host name need be the name which you put in 7.4.2 step 10(when you create the client access point, you also need assign a IP address to this name in your public network, this is refer teh installation guide for ehp4, not ehp5), if your DNS setting haven't done the resolution for this virtual host name, you need put a entry to you hosts file, for example, if you use virtual host name is GPSYSTEM, your hosts in nodeA and nodeB need have below line:
<IP address for this virtual host>   GPSYSTEM
Later on after finish this installation, you can let network team add it to your DNS setting. you need can ping GPSYSTEM after you finish 7.4.2 and bring the access point online. You need use sapinst.exe SAPINST_USE_HOSTNAME=GPSYSTEM to do the installation.
BTW, you should add all your three virtual host name into your hosts file or setup in DNS at first, the three virtual hosts is:
virtual host for failover cluster
virtual host for DB
virtual host for ASCS(suppose you only need ABAP stack), below is my hosts before setup it in DNS
172.30.15.30     DBPRD    #virtual host for db
172.30.15.31     SAPPRD #virtual host for ASCS
172.30.15.32     CSPRD   #virtual host for failover cluster
BR,
Peter
Edited by: Peter Yu on Aug 2, 2011 3:30 PM
Edited by: Peter Yu on Aug 2, 2011 3:32 PM

SAPINST Repeatedly Checking Installed SCS Instance !

Hi Gurus,
We are installing PI 7.0 on Solaris / Oracle platform. We have one Physical Server Having multiple logical instance ( no physical
partition, just logical partitions ) . SCS is installed successfully, without any issue.
On that same physical box, once the SCS is installed on X Logical Partition , to install the DB Instance on the other logical partition Y , we set SAPINST_USE_HOSTNAME = xxxxxxdb ( this is logical host for db instance + db ) and EACH time we launch the SAPInst and what happen repeatedly is :
- SAPInst first displays the message " Invalid Parameter xxxxxx and xxxxxxdb
- Next SAPInst displays the msg " Instllation of SCS Completed Successfully "
- Next when we click on ' ok ' button , SAPInst simply disappears without even displaying the Home Page of SAPInst, which
will have all the options for the various SAP Systems
SAPINST.LOG has following entry
<<<<<<<<<<<
INFO 2009-12-28 16:11:52.342
Working directory changed to /usr/sap/XXX/InstDir.
WARNING 2009-12-28 16:11:53.029
Host name has been overridden. Using host name 'xxxxxx' which might not be the real host name.
INFO 2009-12-28 16:11:53.046
Copied file '/usr/sap/XXX/InstDir/inifile.xml' to '/usr/sap/xxx/InstDir/inifile.7.xml'.
INFO 2009-12-28 16:11:53.826
Copied file '/usr/sap/XXX/InstDir/statistic.xml' to '/usr/sap/XXX/InstDir/statistic.29.xml'.
INFO 2009-12-28 16:11:53.968
Creating file /usr/sap/XXX/InstDir/INSTANA.XML.
INFO 2009-12-28 16:11:55.986
Copied file '/usr/sap/XXX/InstDir/keydb.xml' to '/usr/sap/XXX/InstDir/keydb.7.xml'.
INFO 2009-12-28 16:12:37.593
The installation of component Execution of Service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > Oracle > Distributed System > Based on AS ABAP and AS Java > Central Services Instance (SCS) has been completed successfully has been completed successfully.
INFO 2009-12-28 16:12:37.638
The installation of component NW_Doublestack_SCS|ind|ind|ind|ind finished 28_Dec_2009_16_12_37 has been completed successfully.
INFO 2009-12-28 16:12:37.657
Creating file /usr/sap/XXX/InstDir/sapinst_instdir/.lastInstallationLocation.
<<<<
Any Suggestion that, why the SAPInst will behave in such weired way each time, we attempt to launch SAPInst on different
logical host i.e. XXXXXDB and still it will simply keep checking that SCS Instance has completed successfully and then
disappear ??!
Any / ALL inputs are welcome and your time and efforts are highly appreciated.
Thanks,
Regards,
- Ishan

Are you using the same installation directory by chance? I've noticed this type of behavior when you re-use an installation directory (with all the log files and so on).
Hope that helps.
J. Haynes

SolMan 4.0 - SCS instance allocates wrong ports

Similar Messages

Maybe you are looking for