SolMan 7.1 Setup Monitoring - Custom Template is not display to Assign

Hi All,
SAP Solution Manager Configuration: Technical Monitoring - System Monitoring
While creating custom template, i am facing issue, Please check it out below screens,
After done, all setup, the custom template should display to apply and active.But it is not displaying
This is the error msg below,
Please help me out
Regards
Jay

Hello Jagadish,
thanks for your support.
I went with Visual Admin tool to node SID - Server - Services - SLD Data Supplier.
I saw some information - how can I check here?
Afterwards I went to node SID - Server - Services - JCo RFC Provider and saw informations about client, user password. How can I check these informations? I stopped the SAPSLDAPI_SID RFC listener and started again. This worked without problems.
I closed visual administrator and tried to login again via http://hostname:50000/sld. After cklick on button "Administration" there is no reaction - I get a blank site with no information on it.
When I start configuration again through SOLMAN_ADMIN system hangs now in step 107 " SLD Server Configuration".
Regards,
Julia
Edited by: Julia Bayrhammer on Oct 26, 2011 9:04 AM

Similar Messages

Custom playbar does not display in the list of available widgets

I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
Thanks,
Peter

Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

Liquid list custom template does not link to detail layout

I have a custom template I have setup and working fine, but the problem i have is that I cannot link to the detail layout of the webapp, keep getting page not found. This is my code:
<ul>
<li><a href="{{item_url}}">{{item.name}}</a></li>
<li><a href="{{item_url}}">{{item.CompName}}</a></li>
</ul>

Hi there,
Are you running as a collection? Because you have item.name and item.CompName
If that is the case then those are fine, if not then just use name and CompName
If your NOT running a collection the liquid element for url is {{url}} and if you are running a collection {{item.url}}
If you called your custom field CompName because you did not know how to output a custom field with spaces in it, the liquid output for that sort of thing is...
{{item.['My Custom Field']}} Be it collection or not.

Setup Monitoring: REP trigger could not started in background

Hello experts,
I face the following problem in activating system monitoring for a managed system:
Technical monitoring => Step 5 Setup Monitoring with yellow alert:
Assigning templates was successfully but following error occurred:
Activating managed object <SID>~ABAP, object type T_SYSTEM (CID 0050568100011EE18ED899A5F38FCEC4)
REP trigger could not started in background. Waiting 5 seconds for a retry
Details (<Host> and <SID> are replaced):
<SID>
Activating managed object <SID>, object type DBMS (CID 0050568100011EE18ED8981AA0C04EC4)
REP trigger could not started in background. Waiting 5 seconds for a retry
   <host>
Activating managed object lvsapq1, object type HOST (CID 0050568100011EE18ED8981AA0C20EC4)
REP trigger could not started in background. Waiting 5 seconds for a retry
   <SID>ABAP>Host>_<SID>_00
Activating managed object <SID>ABAP<Host>_<SID>_00, object type INSTANCE (CID 0050568100011EE18ED89D6289F96EC4)
REP trigger could not started in background. Waiting 5 seconds for a retry
   <Host>
Activating managed object <Host>, object type HOST (CID 0050568100011EE18ED8981AA0C20EC4)
REP trigger could not started in background. Waiting 5 seconds for a retry
Any ideas where the problem is and how to fix it?
Thanks and best regards, Basti

Hi,
applying and activating a hour later, the problem was gone. But I don't have data in the system monitoring. I have opened another thread for this troubleshooting. Maybe this information is useful for somebody having the same problem.
Thanks, Basti

Custom Component UI not displaying in 11G

Hi All,
   We have a custom component in 10G where we have added new link in the UCM Home Page, it will be displayed beside Administration tab with name Edit Tables, under this we have sub links Alldistr_RVS, Distprod, Distuser, Prdstate, Products_RVS, State_RVS, Stateusr. When we deployed this code in 11G it is not working. Could any one please provide me code to make it work in 11G instace. Appreciate your help on this.
Below is the code used in 10G in resource file
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ampfRVSEditTables htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
<$include how_to_components_menu$>
<$include vbis_edit_tables_link$>
<@end@>
<@dynamichtml how_to_components_menu@>
<$if not how_to_components_menu_included$>
//add a drop-down menu, or a tray to the UI
navBuilder.addChildNodeTo('NAVTREE', 'collection', 'id==EDIT_Tables', 'label==Edit Tables');
if (navBuilder.menuB)
navBuilder.menuB.addTopLevelNode("EDIT_Tables");
else if (navBuilder.trayA)
navBuilder.trayA.addTopLevelNode("EDIT_Tables");
<$EDIT_Tables_menu_included=1$>
<$endif$>
<@end@>
<@dynamichtml vbis_edit_tables_link@>
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==ALLDISTR_RVS',
'label==Alldistr_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_ALLDISTR_RVS_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==DISTPROD',
'label==Distprod', 'url==<$HttpCgiPath$>?IdcService=GET_DISTPROD_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==DISTUSER',
'label==Distuser', 'url==<$HttpCgiPath$>?IdcService=GET_DISTUSER_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==PRDSTATE',
'label==Prdstate', 'url==<$HttpCgiPath$>?IdcService=GET_PRDSTATE_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==PRODUCTS_RVS',
'label==Products_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_PRODUCTS_RVS_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==STATE_RVS',
'label==State_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_STATE_RVS_PAGE');
navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==STATEUSR',
'label==Stateusr', 'url==<$HttpCgiPath$>?IdcService=GET_STATEUSR_PAGE');
<@end@>
</body>
</html>
Thanks.
Ashok

Hi Jiri,
   I from the sample example I tried to develop component to display HOW_TO_COMPONENTS as Menu item under which there is sub item Annuity_Dispname_Mapping, but it is not displaying. I am afraid where it went wrong. Below is the code i used, please help me to fix this. Thank you
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
MenuExample htmlIncludeOrString
</title>
</head>
<body>
<@dynamicdata CoreMenuItems@>
id,           label,       linkType, linkData
HOW_TO_COMPONENTS, How To Components, YuiDev,
ANNUITY_DISPNAME_MAPPING, Annuity_Dispname_Mapping, YuiDev, <$HttpCgiPath$>?IdcService=GET_DATA_ACCESS_PAGE
<@end@>
<@dynamicdata CoreMenuItemRelationships@>
<?commatable mergeKey="primaryKey"?>
parentId,    id,           loadOrder
MENU_A,      HOW_TO_COMPONENTS, 1000
HOW_TO_COMPONENTS, ANNUITY_DISPNAME_MAPPING, 10
<@end@>
<@dynamicdata CoreMenuItemsFlags@>
id,           flags
HOW_TO_COMPONENTS, isLoggedIn
ANNUITY_DISPNAME_MAPPING, isLoggedIn
<@end@>
<@dynamicdata CoreMenuItemsImages@>
id,           image,                imageOpen
HOW_TO_COMPONENTS,     ScsPageItem.gif,
ANNUITY_DISPNAME_MAPPING,     ScsPageItem.gif,
<@end@>
<@dynamicdata ampcustom_menu_items_template_data@>
<?commatable indexedColumns="id"?>
id,                  parentId,    linkType,        flags
HOW_TO_COMPONENTS_LINK_TEMPLATE, HOW_TO_COMPONENTS, external,
<@end@>
<@dynamichtml custom_navigation_menu_items@>
<$include super.custom_navigation_menu_items$>
<$urlCount = 0$>
<$if utLoadResultSet("pne_portal", "PersonalURLS")$>
<$if rsFirst("PersonalURLS")$>
<$loop PersonalURLS$>
<$ddAppendIndexedColumnResultSet("ampcustom_menu_items_template_data", "NavigationMenuItems", "id", "HOW_TO_COMPONENTS_LINK_TEMPLATE")$>
<$rsLast("NavigationMenuItems")$>
<$NavigationMenuItems.id = "HOW_TO_COMPONENTS_" & urlCount$>
<$NavigationMenuItems.label = js(title)$>
<$NavigationMenuItems.linkData = js(website)$>
<$NavigationMenuItems.loadOrder = urlCount$>
<$urlCount = urlCount + 1$>
<$endloop$>
<$endif$>
<$endif$>
<@end@>
</body>
</html>
Thanks

Help - Templates are not displaying in English

For some reason, the templates in Pages (as well as in iWeb) are not displaying in English -- although that's my default language on my MacBook. I would think this is something easy to fix, but I must just be overlooking something. (MS Word displays its templates in English).
Can someone please help -- it is a bit annoying that the templates are displaying in a different language. Thanks.

Welcome to Apple Discussions
iWork uses a "filler" text known as Greeking to let you see how the templates look with text without having text that would distract you from the layout. This is a fairly common question, so DennisG wrote a user tip about it - Placeholder text in a foreign language.

Columns in Dreamweaver CS3 Template Pages Not Displaying Correctly in IE8

I have a site that has most pages created with a template page that displays three columns below the navbar (counting a small column to the left for the logo at the top the table has four columns). The home page (index.html - not from the template) displays the same colums as the template pages correctly, but all the pages created with the template show the first column as way to wide and the next two columns as far too narrow.
I have trawled the internet to find a solution, but as my knowledge of HTML is limited it is proving near impossible for me to even find a relevant forum topic, let alone a workable solution. All I want is for the template pages with three visible columns below the navbar to display the same widths as those in index.html.
I am working on a mac and the pages all preview fine in Safari, Firefox etc, but not in IE8 on Windows 7 machines.
I have tried rather indelicately to shove various bits of code in to fix the width of the columns and render such commands as table-layout=fixed etc, but with absolutely no effect.
The site is: www.southoverfoods.com
If anyone can help I will be grateful.

You do want to fix these errors -
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.southoverfoods.com%2Fabout.html&charset =%28detect+automatically%29&doctype=Inline&group=0
Most are straightforward.
If you view the page in IE9, and click on the compatibility icon, the rendering looks right. Unfortunately, I cannot force that rendering with any of the accepted meta tag usages!
<meta http-equiv="X-UA-Compatible" content="IE=7" />
<meta http-equiv="X-UA-Compatible" content="IE=8" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
So I'm a little puzzled what to do....

Changes in custom.css are not displayed on iPad

Dear all,
I'm using a custom.css file in my Analysis Application.
Changes in this CSS-file are immediately shown in my design in Design Studio and when executed on the BI Platform.
However, these changes are not displayed when I run the application in SAP BusinessObjects Mobile on iPad.
Thanks for sharing your ideas,
Hans

Hi Hans,
If you make changes to your custom css file and reupload the file to your BIP and then open the report, does it help if your clear your browser's cache and reload the report again, do you see the css changes then?
So instead of restarting the APS just clear the Browser Cache. The changes will be seen only in the browser and for the user who has cleared his browser cache.
If you want to disable css caching there are different options available in general but with Design Studio only some of them can be implemented: you could configure your web server (for example Apache) to force refresh of cached data for example by setting some header parameters/values or with some other method.
(just take into notice the performance implications of such a setting: the best option would be to force the reloading of the css file only when it changes and only for files that are changed, not for all css files all the time)
There is a lot of information about overcoming caching techniques alone when you do a search on the stackoverflow site, for example this one has some good techniques:
What is an elegant way to force browsers to reload cached CSS/JS files?
Regards,
David

Customer Party Account Not displayed

Dear All,
After Saving the billing document, If I see the accounting document, The customer party account is not displayed. Instead I see a G/L account in place of my customer account. Calculations are correct but cant see the customer account. Need all ur help.
I have checked the acc det but there doesnt seem to be any problem. Still any kind of input and suggestions are really appreceated.
Note :- Reconcill acc maintianed in cust master and net value and taxes are calculated correctly in billing
Regards
Denish Patel

Waiting for your valuable inputs......
Let me explain in detail :-
After saving the billing document, the accounting document is generated. My Customer subledger account itslef is not displayed in it. Which means my customer is not debited the amount. i.e. when i see FBL5N there is no record of my transaction.
Some information :- When i manually change the billing type to f2, while creating the billing document. Then its working fine. I can see my customer subledger account. I have also assigned the same pricing procedure to other document and tested, there also it seems to work fine. I have checked the G/L assignments (VKOA) nearly a 100 times. I dont think theres any problem there.
Unable to check the error. Need help. Any kind of input is really appreciated. Any function modules to check with abaper inorder to know the reason for the cause ??
Regards
Denish Patel
Edited by: denish__01 on Dec 10, 2010 11:34 AM
Edited by: denish__01 on Dec 10, 2010 11:53 AM

Customer fields do not display in cProj 4.5

Hello,
I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
I am using following steps to do this:
1. Enhance database tables for customer fields
2. Create field groups for customer fields
3. Assign customer fields for fields groups
4. Define fields groups per project type
5. Save and open cProjects
But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
Does someone has an idea what is going wrong with it and where I can start searching the problem?
Thx, Vanessa

Hello Vanessa,
there is one more step that needs to be done in the customizing:
You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
If you have no field control, these fields will be always hidden.
Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
Regards,
Silvia

Customer number is not displayed at Query

Hi to all,
I have created a query where i need to display the Receivables aging Report.
when i check data at Cube level data is coming properly for Every Customer.
but when i filter customer at Query level data is not displayed at query level.
Please can any one provide me solution.
i shall be thnakful to you for this.
Regards
Pavneet Rana

Thanks for Reply,
For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
although correct data exist for every customer at CUBE level.
Regards
Pavneet Rana

Custom Portal Service not displayed under Service Configuration

Hi All,
I am working on EP 7.0 SP8.
SAP Portal is not displaying any custom built Portal Services under Service Configuration tab.
I checked with the permission, and I am having the required authorization for my service.
I am not able to find any document on making the custom service available under Service Configutation to start/stop the service.
Please let me know any reference docs on this.
-Thanks,
Pavan

Hi Pavan,
> working on EP 7.0 SP8
Glad to hear that you are not stuck on EP5 No, really, that is older than old... Anyhow:
> not displaying any custom built Portal Services under Service Configuration tab
There services are only listed if they are configurable, i.e. if they have a service profile with at least one property (compare http://help.sap.com/saphelp_nw70ehp2/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm). Otherwise it makes less sense to restart a service (normally this is done after changing a service profile parameter).
Hope it helps
Detlev

Web template chart not displayed properly

Hi all
I am facing an issue while displaying graph (column) in web template the graph is coming but only some horizontal and vertical lines. igs server is running but graphs are not coming properly if i am puting table then its coming properly..
Regards
Amiya

Hi,
What does it mean ? it is not displaying or partially displaying ?
Regards
Pcrao.

Pge Template Popup not displaying the buttons

I assigned the template popup to a page. But now the button in that page is not displaying.
Any help?
Thanks
Deb

It's always helpful if you provide the following information up front with any question:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s) used
- Theme
- Templates
- Region type
I assigned the template popup to a page. But now the button in that page is not displaying.What is the purpose of this page? Is it actually a pop-up? Or just intended to have minimal structure? What button—what is its purpose? Is it in a region or item position? An HTML button or a template button?
The problem is not with the page template. while opening the page I am passing the printer friendly parameter as YES which I have to. And that i causing all the mess.Printer friendly mode typically applies some generic changes to how a page renders, one of which is not to show buttons.
Why do you have to have the page in printer friendly mode? And why do you want a button then to be displayed against normal convention?

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

SolMan 7.1 Setup Monitoring - Custom Template is not display to Assign

Similar Messages

Maybe you are looking for