SolMan_Setup - Check Prerequistes fails
When running "Managed System Configuration ->Check Prerequisites" job SMSSETUP:AGS_MS_CHECK_PREQ fails with error message "Incorrect call of RSTG".
Job Log:
Date Time Message text Message class Message no. Message type
11.02.2012 12:02:06 Job started 00 516 S
11.02.2012 12:02:06 Step 001 started (program RAGS_SISE_STEP_JOB, variant &0000000000017, user ID RBECKER) 00 550 S
11.02.2012 12:02:06 Imported p_stepid:AGS_MS_CHECK_PREQ 00 001 S
11.02.2012 12:02:06 Imported p_sp:E445AA90817AB01274A39A5689330703BEAEAA01 00 001 S
11.02.2012 12:02:06 Imported p_sp_tsk:N73ABAP$N73DATABASE 00 001 S
11.02.2012 12:02:06 Imported p_exepar:ALL 00 001 S
11.02.2012 12:02:06 Check Prerequisites started SISE_CONF 189 S
11.02.2012 12:02:06 Execute STEP_ID:AGS_MS_CHECK_PREQ 00 001 S
11.02.2012 12:02:06 Execute activity: Diagnostics Prerequisites for system N73~ABAP SISE_CONF 199 S
11.02.2012 12:02:07 Incorrect call of RSTG 00 023 A
11.02.2012 12:02:07 Job cancelled 00 518 A
Anybody an idea how to solve this problem?
Best regards
Roman
Hello!
Have you checked if the managed system actually fulfills the diagnostic prerequisites??
for solman 7.1
Note 1478974 - Diagnostics in SAP Solution Manager 7.1
Note 1483508 - Solution Manager 7.1: Root Cause Analysis pre-requisites
for solman 7.01
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP28
Cheers,
Diego.
Similar Messages
-
Meaning of this error (ISE 1.2 on SNS-3415): HARDWARE RNG INTEGRITY CHECK HAS FAILED!
Hi. We recently purchased an ISE 1.2 appliance (SNS-3415 hardware). It installed fine, but I am unable to access the GUI. When I login to the box and run the following command on the CLI
ISE-12-NS-SD-2/admin# show application status ise
I see the following output:
ISE Database listener is running, PID: 7737
ISE Database is running, number of processes: 38
ISE Application Server process is not running.
ISE Profiler DB is running, PID: 9090
ISE M&T Session Database is running, PID: 8959
ISE M&T Log Collector is running, PID: 9294
ISE M&T Log Processor is running, PID: 9376
% ERROR: ISE SERVICES HAVE BEEN DISABLED BECAUSE
% HARDWARE RNG INTEGRITY CHECK HAS FAILED!
Can anyone help me? What can I do to ensure that the hardware RNG integrity check succeeds. Is it a license issue? Is it faulty hardware? Please advise. I would be very greatful.
Thanks in advance.I worked with a TAC engineer on this and he said one other customer had this issue and the only recourse was reimaging the appliance with the ISE 1.2 ISO image.
I did reboot, restarted services, reset to factory default and none of that worked. It is possible that the issue happened because during setup of the appliance I didn't have network connectivity and went ahead with the setup and configuration of the ISE application anyway. I later had network connectivity but by that time ISE manifested this fault.
Reimaging and ensuring network connectivity during setup the next time around fixed the problem. -
In workflow need to check in passed validaitons and check out failed once?
Hi All,
Can any one let me know is the following requirement possible?
In workflow can I able to split records based on validation result? I need to check in passed validations and check out failed validations..
Regards
RajeevHi Rajeev,
You can try out both branch step and validation step and see which serves your purpose better.
In branch step you can give multiple validation/validation groups,if result is TRUE take the first branch and check in at STOP.
If FALSE,take dont checkin at STOP,either cascade or Rollback as the case be.Also here you can call the same or other Workflow.The split branches can later be combined using MERGE or Group.
Other way can be by using Validation step,setup iteration threshold.here failed jobs will be sent to previous step and passed ones will move ahead in WF.Later you can checkin at STOP and failed jobs would still be in WF in checkout state.
For your reference :
http://213.41.80.15/SAP_ELearning/OKEC/nav/content/011000358700000601512007E.PDF
http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
Thanks,
Ravi -
What do I do if my laptop keeps saying checking media fail and it keeps saying no bootable device
I need help because my laptop keeps saying checking media failed and then it says no bootable device please restart system I don't get it
checking media failed and then it says no bootable device
This is possible HDD failure. Could be that the Hard Drive is no longer working.
*********Click on Kudos if it helped you. Thanks! *********** -
Updates and check DB failed in DB13
Hi All,
in one of our quality system, updates and check DB failed that scheduled in DB13. the error log shows there is permission issue, but i checked the BRTOOLS permissions it has rights, i attached the error log here, plz suggest to solve the issue.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000816, user ID SAPADM)
Execute logical command BRCONNECT On host sapqasr
Parameters: -u / -jid CHECK20100724000000 -c -f check
BR0801I BRCONNECT 7.20 (6)
BR0252E Function stat() failed for '/oracle/QAS/112_64/bin/sqlplus' at location BrFileStatGet-1
BR0253E errno 13: Permission denied
BR0273E Determination of file status for /oracle/QAS/112_64/bin/sqlplus failed
BR0280I BRCONNECT time stamp: 2010-10-26 07.00.43
BR0301E SQL error -12546 at location db_connect-2, SQL statement:
'CONNECT /'
ORA-12546: TNS:permission denied
BR0310E Connect to database instance QAS failed
BR0806I End of BRCONNECT processing: ceekqzgd.log2010-10-26 07.00.43
BR0280I BRCONNECT time stamp: 2010-10-26 07.00.43
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Thanks,
BalajiHi,
BR0301E SQL error -12546 at location db_connect-2, SQL statement:
'CONNECT /'
ORA-12546: TNS:permission denied
BR0310E Connect to database instance QAS failed
From the above errors, I am guessing that you may be trying to run CheckDB / Update statistics jobs from DB13 for REMOTE DB Instance located on Remote Host (i.e. QAS instance).
If my guess is right then, please refer [SAP Note 1256322 - Establishing a remote database connection in DBACOCKPIT|https://service.sap.com/sap/support/notes/1256322] and do the required settings as listed in that SAP Note 1256322 and then retry.
Also ensure that latest BR*tools is in use with the required permissions on local/remote hosts.
Permissions 4775 should be there for brarchive, brbackup, brconnect, brtools with owner ora<sid> and group sapsys.
Permissions 755 should be there for brrestore, brrecover, brspace with owner <sid>adm and group sapsys.
Use the following commands to change the permissions & owners/groups for the same.
chmod 4775 brarchive, brbackup, brconnect, brtools
chown ora<sid>:sapsys brarchive, brbackup, brconnect, brtools
chmod 755 brrestore, brrecover, brspace
chown <sid>adm:sapsys brrestore, brrecover, brspace
ORA-12546: TNS:permission denied
If QAS is the remote DB host, then copy+paste the TNS entry in file tnsnames.ora of monitoring system (located at /oracle/<SID>/<Rel>_64/network/admin location). Its guided in the above suggested SAP Note 1256322. then check the connectivity using tnsping <Instance ID>. It should be completed with success and response time.
Regards,
Bhavik G. Shroff -
Location: bcpimp.cpp:1797
Expression: cbOutTemp < cbOutputStr
SPID: 52
Process ID: 2364
Msg 3624, Level 20, State 1, Line 3
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.If you check your sql server error log folder you will see dump files created. You need to send those dump files to Microsoft for inspection because outside of microsoft product support the symbols for reading the dumps are not available without which it
wont be easy to find the issue.
http://support.microsoft.com/kb/2028589
In the meantime check if you are on the latest version of Service Pack and if not apply the latest service pack. Majority of these kind of assertions are bugs which are solved in Service Packs/Cumulative Updates.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Check In failed for the activity
Hi,
Here we have developed a Webdynpro application through JDI. We have created an activity for the application. The application is working fine, but we are facing the problem with the check in. It is saying check in failed for the activity. Below are the deatils about the exception occured while check in.
13:31:51.546 UPLOAD (FAILED: Upload file content on repository failed) Create.wdview.xlf (C:\Documents and Settings\Suresh.Bachimanchi\.dtc\4\DCs\company\example\_comp\src\packages\com\abc\example\vac\create\Create.wdview.xlf)
13:31:51.546 CHECKIN (FAILED: Upload file content on repository failed) ExampleApp (act_w_test_example_2e_com_FPM_DEV_dev_inactive_u_cmsuser_t_2006_10_09_12_46_38_GMT_6ba2c1c6-6897-4411-ab2c-808649ab567c)
Regards
SureshHi,
Refer to the flwg link,
http://help.sap.com/saphelp_nw04/helpdata/en/21/1cdf3f3e054e1de10000000a155106/content.htm
Hope it helps.
Regards
Srinivasan T -
Check Db fails after kernel patch update
Hi,
I've updated kernel 710 to the latest patch "159" on my PI 7.10 system, however now Check DB fails when scheduled from DB13 with a
"Scheduling failed" error.
We have SQL 2005 & I'm able to execute the job succesfully via the SQL Managemnt console.
Also, all the other background jobs are working just fine.
Pls. help.
Thanks,
Saba.
Edited by: Rajeev Ganju on Jul 22, 2009 2:37 PMHello,
Since I'm on SQL, I use DB13 just for Check DB.
I've tried deleting everything & recreating the schedule, but it has'nt helped.
Even after rescheduling, SM37 doesnt reflect the scheduled jobs.
Thanks,
Saba.
Edited by: Saba Sheikh on Jul 23, 2009 9:21 AM -
Grid Control 11g Agent: The free port availability check has failed.
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
Amos814475 wrote:
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
AmosYEP, overhere the same problem.
Can't figure out yet what the problem exactly is.
In our case I deinstalled a working 10.2.0.4 agent ( same port same config ) and tried to install 11g Agent.
It fails with the above message. We however are on AIX, and that hasn't a 'netstat -p' option to find occupied ports easily.
Because the database is question needs to be monitored constantly I now reinstalled the 10.2.0.4 agent again and works seemlessly
Still unsolved.....
FJFranken -
Check complete. The overall result of this check is: Failed ASM ins
Need steps to clean that plz
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that you may have an Automatic Storage Management (ASM) instance improperly configured or one that was not properly cleaned up from a previous install.
Recommendation: You must completely remove the ASM instance by deleting the entry for it from the oratab file, or you must configure it properly by ensuring that the oratab file is updated to point to a valid Oracle Home where ASM is configured.
========================================================Either remove the line in the /etc/oratab file for the ASM instance, or add it if it is missing.
The file shows the proper format of the line. -
(Loader Class AS3) How to check load fail?
Hi everybody, I have used Loader Class to load a JPEG file into my Flash movie during runtime.
my_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, startListener);
my_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressListener);
I'm only able to check event completed and event in progress. Is there a function to check load fail? I want my flash movie to show an error textbox pop out when the Loader Class is unable to find the JPEG file.my_loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
function ioErrorHandler(event:IOErrorEvent):void {
trace("ioErrorHandler: " + event);
} -
hello guys, this is my first time here. nice to meet you..
anyways, i have a problem. i have a satellite c50-a491 laptop and im trying to install windows 10 tech preview and every time im trying to install the os thru usb there is "check media fail" error and continues to lock screen, what should i do? when i installed windows 8.1 pro months ago it worked, but now when im trying to do it again the error appears.
i need you replies as soon as possible. thanks.Satellite C50-A491
Try it this way.
-Shut down Windows 8 while pressing the Shift key to completely power off.
-Power on and press F2 while the Toshiba logo is displayed to enter the UEFI Setup Menu.
-Go to the Security tab and set the "Secure Boot" setting to "Disabled".
-Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot."
-Press F10 to save and exit.
In order to successfully install Windows 10, you may need to remove the existing GPT partitions during Setup and create new ones.
-Jerry -
Satellite C855-1TD starts with message "Checking media [Fail]"
Okay, My Toshiba laptop has suddenly refused to work and will not start up. When it loads past the initial toshiba loading screen, a black screen appears saying "Checking media [fail]" I've tried everything that I have seen online that does not include opening up my laptop. It does not let me acess the Bios and I have tried every combination available.
My laptop is a Toshiba Satellite C855-1TD and runs on windows 8.1 software.
Any ideas? Thanks!Hi
Usually you should be able to access the BIOS pressing the F2 button while booting up the unit.
I cannot say for sure but it looks to me like serious hardware malfunction if you are not able to access the BIOS.
Such serious hardware problem might be related to motherboard problems as well as RAM modules.
In case you are able to access the BIOS, check if the HDD is still visible on the first BIOS page.
If HDD isnt visible, then the notebook cannot find a proper bootable device and therefore the error Checking media fail appears. -
Hi All,
I need your help.
My use case is to edit a document locally which fails.
In detail:
After pressing Edit locally the file opens in the right application.
Then I change some entries in the document, save it and want to check in the doc.
After a while the checkin fails and I get the error message:
"A communication error occurred. "QAlerts.xls" could not be uploaded"
I must say its not an typically document, its an Excel file with more than 50 MB.
In the error log you can read about timeout.
So checked the configuration for example the Http Provider Service, but in my mind all looks good.
Im glad for any other ideas.
Many thanks
SteveClosed because get no answers
-
Check printing - failed to load image
hello
i have an issue with printing checks. a long standing one.
my problems started when i put an image on a check. i wanted to add a signature image. once i did that, the popup that came up when i print a check did not come up. only for one user. i tried to solve the problem but it never got sorted out. so i created another username and removed the old one and it was working fine.
next i had an issue with the check not printing on blank pages for overruns only for one customer. to test why this was happening, i went to print preferences and and tried changing the maximum lines from 25 to 20. it popped a message saying 'failed to load image'. i ignored it. after that, i have now started to get the same problem of not getting the confirmation message when a check is printed.
why is this happening? is my only solution to delete this user and recreate one? any suggestions?Hi,
For the image related issue:
+Since it is a User specific issue,we would require the difference in permissions and security settings for that particular user and for a user for which it is working.
+What is the format of the picture (.JPG, >GIF etc.)
+If this happens only for one super user then try to create a new super user and test.
Regards,
Abhinav Banerjee
SAP Business One Forums Team
Edited by: Abhinav Banerjee on Nov 22, 2008 3:20 AM
Maybe you are looking for
-
HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the lap
-
i have a question about Dynamic Menus for Navigation... i am a new in jsf/adf... and i want a suggestion about my new application i am trying to do: my boss has give me all the items that the menu will have.... and this menu will be the same for all
-
What could the 'other' section be?
7.75 gigabites of this. http://img163.imageshack.us/img163/1307/screenshot20130224at401.png I'm pretty unsure as of what it is, I have an iphone 4s. any help?
-
Xsl for-each not working in BPEL
Hi, My input xml would contain the attribute @SourceModified at many places. In a xsl, for each occurence of that attribute I need to assign a set of values and then invoke a partnerlink. My code is <xsl:template match="/"> <xsl:for-each select="//@S
-
When I attach certain PDF files to an email, sometimes the first page is viewable in the email. How do I eliminate this?