Solution for 5.1 digital speakers(like inspire5500/5700..)and creative soundcards! IT WOR

I have inspire 5500D that have the same problems than yours ...
the problem is that the digital outputs does not support more than a 2. or coded signals like ac3 (for DD) and theres no way to make it work .... is just imposible ...
now ure question is and what should i do ?
well first of all u should be like me ... really ungry with creative ! HOW CAN THEY SELL SOUNDCARDS INCOMPATBLE WITH THEIR OWN SPEAKERS IS INCREDIBLE ! (example Inspire 5500D/5700D ... incompatible with sbli've 5.D (and all the rest of creative soundcards...) is a joke ?) ....
theres only one solution to youre problem ... and is a pain ! i have done it and now it works perfectly ! here it goes :
Forget u have an external decode .... u must plug the 3 cables (front/rear/center) that now goes to youre decoder, directly to youre soundcard ! (and keeps the external decoder on since is the only way to mantain electricity in youre speakers...) then u will have analogic speakers ! all works great ! but im really ungry that my external decoder that cost much more than a simple analogic speakers is just totally unusefull ...
Now listen youre system now will work really better ! with cmss-3d and THX config u will not remember youre external decoder ! loud rear speakers ? not more .... no 5. in games ? no more ....
Creative digital speakers for PC is just a waste of money ! (good work creative ...)
This repair ALL so u must have REAL 5. in DVD (using soundcard decoder), games, and all kind of applications! (if the sound is in 5. of course ! if not u will still hear envolvent sound thanks tu cmss-3d) so If any needs help about this just ask in this post ....
Message Edited by Istarth on <SPAN class=date_text>0-24-2006 <SPAN class=time_text>07:3 PM
Message Edited by Istarth on 0-24-2006 07:4 PM

Where is the soundblaster forum? I cannot find it's I have a Playworks DTT3500 Digital 5.1 speaker system & am confused as to which sound card to put in my PC to upgrade it-creative or otherwise.Please help,Simon.

Similar Messages

  • Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

    Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.

    Hi
    We are developing solutions in that area.
    If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
    then we can discuss about arriving at a solution.
    My mail-id is [email protected]
    Thanks and Regards,
    Bibs

  • I have iphone 3gs having ios 4.1 and its really creating problem for me to install application like watsapp, viber and etc. when i was trying to install any apps the msgs comes on my screen to install ios 4.3 so can anyone guide me plsss

    After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?

    After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?

  • Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing

    I have read over the past week the problems people have been having configuring their Apple TV and Home Sharing. I was experiencing the same issues as others....until tonight. I finally got it to work with an Ethernet connection. Previously, I was only able to get it to work via wifi and home sharing would drop after awhile.
    1) Xfinity router settings. Like others I was suspicious if the Xfinity router was causing the issues because of the separation between wifi network and Ethernet network. It's not the router problem. I disabled the firewall. Enabled port forwarding. Gave a static IP address to the Apple TV. Added forwarding of ports
       123 TCP
        3689 UDP (all other support says this should be TCP but searched through and found a thread that suggested changing to UDP...this was the key)
        5353 UDP
        80 TCP
        443 TCP
        53 TCP
    DMZ is off
    Device discovery is disabled
    Port triggering is disabled.
    The wifi is setup and functional using DHCP. Lease time is 1 week.
    RESET ROUTER AFTER ENTERING CONFIGURATION.
    2) Mac computer. As of this posting the latest version of iTunes installed. Latest Safari version. All programs updated. Turned on Home Sharing. Turned off firewall. Gave Mac a static IP address. Set Mac for hard drive to never sleep. Set monitor to sleep after 15 minutes. Set date and time to automatically find based upon time zone. ( Apple TV needs to be set to the same time zone as computer and set to manual). Enabled file sharing amongst users on Mac.
    3) Apple TV. Ethernet connection. Configured TCP/IP to static IP address  I configured on router for the Apple TV. Turned on AirPlay. Set date and time to manual and set as the same time zone as the computer with iTunes. Turned on Home Sharing. Using latest version of Apple TV.
    Once the router was reset ( not restored and not just resetting the wifi. A complete router reset), the Apple TV found my iTunes library. It's been running now for over an hour and no drop in the home sharing. Working beautifully. I will be testing in the next couple days allowing the Apple TV to sleep, turning the firewall on the router to a minimal setting to see if it changes anything.
    Just tested the AirPlay from my iPad 2 to the Apple TV while the Apple TV is connected via ethernet connection and it works. At this point it appears that the setup is correct and complete with no errors.
    As a side note, the Ethernet connection between my router and Mac is via commercial devices using the power outlets as the wiring.
    Hope this helps many of you that were/ are struggling to get this to work like I was.

    spma3,
    Appreciate your further message. As you say "it's not fixed", but at least your solution appears to be a viable workaround!
    My Cisco RVS4000 Router will permit me to forward ports for up to 15 applications. Of these, thirteen already have default entries added, although none of these are presently Enabled. For example, here's just 2 lines...
    Application           HTTP        NTP
    External Port          80           123
    Internal Port           80            123
    Protocol                TCP          UDP
    IP Address            No entries at both
    and the Enabled box for both is unchecked. In fact none of these 13 possibilities is Enabled.
    To do what you are advising, I would need to...
    1) Enable the above Port 123 entry, changing it from UDP-->TCP.
    2) Add new entries for 3689 UDP & 5353 UDP... using the two free slots at the end of the table.
    3) Select three of the default entries, and reconfigure them for 80 TCP; 443 TCP; 53 TCP, all as per your guidance. And Enable them.
    Now, my present setup here has...
    1) My PC is wired straight to Port 2 of the Router, and has a Static IP Address set.
    My new ATV2 is hard-wired into the same subnet, albeit thru a series of switches, and again a Static IP is set. My understanding is that hard wiring an ATV automatically disables its WiFi.
    3) My wife's iPad2 is set for DHCP, so it can pick up an IP Address when on the move. It connects into the LAN using one of two WAP4410N Wireless Access Points. Ch-1 & Ch-6, with same SSID and security stuff set up on both. The WAPs in turn are wired in, again with Static IPs set. So depending where she is in the property she can connect with excellent signal strength, reaching the ATV2  by WiFi+LAN.
    On the Router DMZ is OFF, Port Range Triggering has no entries, nothing is Enabled, so is OFF. No idea about Device Discovery!
    Home Sharing is ON for the PC, ATV2 and iPad2, with the same Apple ID/Password set for each. It does work, just not consistently as it should.
    So to fully implement your idea, all I need to do is to enter these details. But I am unclear which IP Address I should put in at each new Single Port Forwarding entry field. Certainly not the iPad2, as its DHCP allocated value will change. Is it the ATV2 or the PC? Not sure, please clarify.
    BTW, I have no plan to deactivate my AVG Firewall on this PC. It is happy to pass all traffic related to iTunes, so cannot see this as a factor. Time zone same on all equipment.
    I tried with just 3689 UDP and 5353 UDP yesterday, and things were definitely better. I used 192.168.20.227, the IP Address for the ATV2.
    Look forward to your answer.

  • Solution for invalid directory item count, startup disk corruption and regular crashes

    Hi,
    My late 2006 MacBook (10.6.8) has recently started crashing quite frequently. The screen becomes dark and a multi-language dialogue appears stating that the computer must be restarted with the power button. When this occurs any audio which was playing begins to repeat/skip and the computer goes into complete lockdown. This is now happening perhaps twice a day or more under moderate use.
    This morning I ran 'Verify Disk' in Disk Utility and the process was stopped, stating that I had two 'Invalid directory item counts' and 'the volume Macintosh
    HD was found to be corrupt'. Here is a screenshot of the Disk Utility window:
    I have rebooted, run a software update and rerun the disk verification but to no avail. I also booted using CMD-S, advised by an older post in another forum which suggested using 'fsck -yf' which ran and stated that the disk had been repaired.
    I bought the MacBook second hand from an Apple dealer but it didn't come with an install disc so I am unable to reboot and repair the disk like that.
    My questions, therefore, are what does this mean for my computer in the future, will either of these issues cause me more trouble?
    What can I do about it without the install disc
    And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
    Thanks in advance for any help you can offer!
    Twitch

    Not much you can do without an install disc which can be purchased from Apple Store >  Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    multi-language dialogue appears
    That is referred to as a kernel panic. OS X: About kernel panics
    Regardless of the kernel panics, you will still need the install disc to repair and reinstall OS X if necessary.
    And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
    Could be part of the problem.

  • THE Solution for partial sync or no sync of contacts and calendars and iPhone malfunctions!

    Alright. So...this worked for me too. Finally...and no hlep from the apple store OR apple care! Got a new phone from apple store...FAIL...no call back from Sr. Tech...FAIL.
    So...I did the following:
    On the phone first:
    1) Switch to airplane mode
    2) Reboot phone by holding top key and front button until apple logo appears (not red slider to turn off phone)
    3) Settings - iCloud - Turn contacts OFF - Delete From Phone (make sure you get a check mark after completion)
    Then on the Mac:
    4) Open address book on mac
    5) Command + A to select all contacts in address book...double tap trackpad and export as V card
    6) Command + A to select all contacts in address book...goto Edit...drop down menu and choose delete cards
    7) Verify all are deleted on iCloud because the address book is synced to my iCloud account
    8) Drag and drop vcard backup back into all contacts in address book or choose import from File menu in address book
    9) Verify all contacts were back on iCloud by visiting iCloud on my computer's browser
    Back to the phone:
    10) Turn Airplane mode off...make sure I connected to my WiFi network
    11) Settings - iCloud - Turn contacts ON
    Voila! Got 483 of my 488 contacts...good enough for me...only had 99 to 149 for the past month!!!!
    OH - This also fixed my calendar issue...all my appointments are back!
    Hope this helps somebody!
    - Beau

    I just looked a little further in the forums and found this thread. http://discussions.apple.com/thread.jspa?threadID=2048666&tstart=15
    Following the instructions in about the third post down cleared up my duplicate contacts.
    Message was edited by: bjt364

  • After recent upadte to firefox 9.0 beta 5 the screen becomes black for most part. Its like the pages and everything is working perfectly but it becomes black and flickers a lot.

    I m using win 7 home premium 64 bit edition. Yesterday night i updated the firefox to the latest 8.0.1 version and as soon as I open the window parts of the screen becomes black and starts flickering a lot. Can use everything on my laptop except browsers.Cant use it anyhow and also my internet explorer stops working when i try to download anything.

    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price
    Sometime it takes a little while for the water to damage the iPod.

  • Solution for a course going to a black screen and locking up after a while (20-30 slides for me)?

    The LMS is Saba and I'm using Captivate 6.  I am testing the course in production.  The course goes to a black screen and locks up.  The first time was at slide 28 of 55 which is a widget and the second time was at slide 20 of 55 which is a multiple choice test item.  I'm not sure if the type of slide I'm trying to advance to matters but I want to give as much info as possible. The issue seems to be random since I was first able to get to slide 28. 

    With LMS issues you should always test the same project in SCORM Cloud before you blame the project.  If SCORM Cloud shows the same issue, fine, blame the project.  If SCORM Cloud has no issue with it, get in touch with the LMS vendor.  It may be that they need to update some component of their SCORM Player software.

  • What's the best storage solution for a large iLife? RAID? NAS?

    I'm looking for an affordable RAID storage solution for my Time Machine, iTunes Library, iMovie videos, and iPhoto Library. To this point I've been doing a hodgepodge of external hard drives without the saftey of redundancy and I've finaly been bitten with HD failures. So I'm trying to determine what would be the best recommendation for my scenario. Small Home Office for my wife's business (just her), and me with all our media. I currentlty have a mid-2010 Mac Mini (no Thunderbolt), she has an aging 2007 iMac and 2006 MacBook Pro (funny that they're all about the same benchmark speed). We have an AppleTV (original), iPad2 and two iPhone 4S's.
    1st Question: Is it better to get a RAID and connect it to my Airport Extreme Base Station USB port as a shared disk? OR to connect it directly to my Mac Mini and share through Home Sharing? OR Should I go with a NAS RAID?
    2nd Question: Simple is Better. Should I go with a Mac Mini Server and connect drives to it? (convert my Mac Mini into a server) or Should I just get one of those nice all-in-one 4-bay RAID drive solutions that I can expand with?
    Requirements:
    1. Expandable and Upgradeable. I don't want something limited to 2TB drives, but as drives get bigger and cheaper I want to easily throw one in w/o concerns.
    2. Simple integration with Time Machine and my iLife: iTunes, iMovie, iPhoto. If iTune's Home Sharing feature is currently the best way of using my media across multiple devices then why mess with it? I see "DLNA certified" storage on some devices and wonder if that would just add another layer of complexity I don't need. One more piece to make compatible.
    3. Inexpensive. I totally believe in the "You Get What You Pay For" concept. But I also realize sometimes I'm buying marketing, not product. I imagine that to start, I'm going to want a diskless system (because of $$$) to throw all my drives into, and then upgrade bigger drives as my data and funds grow.
    4. Security. I don't know if its practical, but I like the idea of being able to pop two drives out and put them in my safe and then pop them back in once a week for the backup/mirroring. I like this idea because I'm concerned that onsite backup is not always the safest. Unfortunately those cloud based services aren't designed for Terabytes of raw family video, or an entire media library that isn't wholey from the iTunes Store. I can't be the only one facing this challenge. Surely there's an affordable way to keep a safe backup for the average Joe. But what is it?
    5. Not WD. I've had bad experiences with Western Digital drives, and I loathe their consumer packaged backup software that comes preloaded on their external drives. They are what I meant when I say you get what you pay for. Prettily packed garbage.
    6. Relatively Fast. I have put all my media on an external drive before (back when it fit on one drive) and there's noticeable spool-up hang time. Thunderbolt's nice and all, but so new that its not easily available across devices, nor is it cheap. eSata is not really an option. I love Firewire but I'm getting the feeling that Apple has made it the red-headed step-child of connections. USB 3.0 looks decent, but like eSata, Apple doesn't recognize it exists. Where does that leave us? Considering this dilemma I really liked Seagate's GoFlex external drives because it meant I could always buy a new base and still be compatible. But that only works with single drives. And as impressive as Seagate is, we can't expect them to consistently double drive sizes every two years like they have been -cool as that may be.
    So help me out without getting too technical. What's the best setup? Is it Drobo? Thecus? ReadyNAS? Seagate's BlackArmor? Or something else entirely?
    All comments are appreciated. Thanks in advance.

    I am currently using WD 2TB Thunderbolt hard drive for my iTunes, which i love and is works great.  i am connected directly to my Mac Book Pro. I am running low on Memory and thinking of buying a bigger Hard drive.  My question is should I buy 6TB thunderbolt HD or 6TB NAS drive to work solely for iTunes.  I have home sharing enabled for my Apple TV 
    I also have my time capsule connected just as back up only.   

  • Solution for printing of Purchasing Documents in SAP with version managemen

    Hi experts,
    We found that the standard solution does not meet the following requirements for purchasing document
    1)     The print for the latest version of the document does not contain items unaffected by change. It  requires printing of whole document with all items, but with version number and highlighted changes.
    2)     The standard solution cannot highlight some of the changes which are not captured by version management like text changes, target value and Contact (Purchasing Group) in header, text changes at item level, etc.
    3)     The standard solution can be used to reprint the whole PO without version management but that cannot highlight the changes specific to the version for which it is printed.
    If any solution which can meet the requirements specified above, please let us know <removed by moderator>.
    Thanks in advance.
    Edited by: Thomas Zloch on Mar 30, 2011 9:39 AM

    Ok.
    I have already done with SPRO configuration.
    MM->Purchasing->Version management->
    It has implemented ECC 6.0. The version management has been activated for Purchasing documents. The standard printing solution for printing of these documents (PO, Outline Agreements and RFQ) print these documents with changes made in the latest version. Any item which is not changed in the latest version does not get printed.

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • I have a solution for DKIM signing in Windows Server

    Hello.
    I have a solution for DKIM signing Keys in Windows Server 2008 and 2012
    Explanation will be long in the forum.
    If someone in need, please contact me by skype ID: sasgroupe
    Thank you

    Hi,
    Nice.
    But is it feature that header is not scroll horizontally ?
    Br, Jari

  • What is the best solution for bad service at home

    I need to know if there is any solution for this problem a's in signal boosters and all....

    You should contact your Service Provider and tell them your problem that you are facing..
    That's the only way because they can solve the problem from their end         

  • Custom based solution for Lync Server 2010

    I am working with a customer which is a school and we are implementing Lync Server 2010 as UC solution. There are few considerations for this solution. The requirements are -
    1. The girls should always chat to girls not boys and vice-versa
    2. The students from same class should chat and not with other classes.
    So, wondering if we have any solution for the same. We dont have time and developer to work on Lync Server SDK and give us the solution.
    Thanks and Regards/Harpreet S

    Hi,
    Yes, please try ethical wall as Saleesh said.
    http://windowspbx.blogspot.com/2012/07/controlling-who-has-what-access-to-who.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • My ipod is locked for like 23,000,000 minutes (like 43 years) and its not syncing to my computers so i cant factory reset it what should i do

    So my Ipod got locked for 23,178,602 minutes (like 43 years) and the ipod will not sync to my laptop or pc and i can not reset it, what can i do to get it unlocked with out waiting 43 years?

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
         After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

Maybe you are looking for