Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.

Hi
We are developing solutions in that area.
If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
then we can discuss about arriving at a solution.
My mail-id is [email protected]
Thanks and Regards,
Bibs

Similar Messages

Need solution for Use Case - Page Fragment?

I have a set of controls and table which I need to insert into many tabs such that each tab displays the same table and functions but with slightly different data. The controls and table could be used in many different areas so doesn't make sense to code each and everyone mutiple times. I thought then that making this set of functions a page fragment and including it would do the trick, however, an exception that I have the same ID's defined was raised.
Can someone tell me what technology I should use for this use case such that one a single page with tabs I can include the same set of controls many times? Can page fragments be used multiple times on one page or do I need some sort of declarative component?
Thank you,
Kris

Task Flows is the way to go...
Just create a bounded task flow and create a default view activity (which is going to be your page fragment with table and other controls).
Now you can drop this TF on every tab and this way you will get a resuable table and control.
Read about Task flows in dev guide if you need further understanding on this.
One more thing, this will give you exactly same stuff on each tab. So, I am not sure what you want to change in every tab? A detailed description of your requirement might help.
Vik
Hope this helps
http://adfjsf.blogspot.com
http://www.linkedin.com/groupSharingMsg?displayCreate=&connId=-1&groupID=1801839

Need solution for use of IS/AS in function/procedure.

Hi All,
What is the diffence in IS / AS using in procedure /function ..
could you please tell ...

There is no difference. They are interchangeable.
By convention, you will frequently see IS used in functions and AS used in stored procedures-- I'm guessing that in some ancient version of Oracle there was a difference. But it's now all a personal preference.
Justin

Solution for using power pc apps with mountain lion

Options for using my Power Pc Apps with Mountian Lion? Specificly I need to use Citrix ICA Client editor.

You would have to erase Mountain Lion and reinstall Lion in order to use PPC apps. Or you could try to Upgrade to a newer version of the PPC software that would no longer be PPC based.
Hope this helps

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

Can i create additional apple id's using the same email address for using multiple products with iCloud?

can i create additional apple id's using the same email address for using multiple products with iCloud?

Hi Anne,
I'm pretty sure different eMail addies are needed for different Apple IDs.

Is the latency period of firefox OS zero for use of Aud 1 App ? I have hearing problem.

Is the latency period of firefox OS zero for use of Aud 1 App ? I have hearing problem.
Pl. inform the devices with Firefox OS with latency period zero. I have hearing aid app Aud1 for assisting in hearing I wanted to buy a phone having Firefox OS with ZERO LATENCY PERIOD!
Also pl. inform if a hearing aid app is available on firefox OS on mobile phones with existing latency period.
THANKS
SHYAM SUNDAR

Hi ChachanKushal38,
Unfortunately, there is not a hearing aid hardware available specifically for Firefox OS.
You may submit feedback directly to the Advocacy team through the following page:
* [https://input.mozilla.org/feedback/ Submit your Feedback]
The [https://wiki.mozilla.org/Advocacy User Advocacy] team reviews all feedback and reports on the findings to the product teams and relevant parties, helping to influence and shape our products.
There is also no application in the Firefox Marketplace by the name of Aud 1. Please contact the creators of that feature for specific information about latency and availability on Firefox OS.
- Ralph

HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

what is the best method for using a iphoto with an external hard drive for greater capacity?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

What version of iphoto do i need for my 2004 powermac with 10.5.8 and where do i get it

what version of iphoto do i need for my 2004 powermac with 10.5.8 and where do i get it

iLife 04 through 09, which are available from places such as eBay or Amazon.
(79729)

Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
https://discussions.apple.com/message/24358339#24358339
If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

Similar Messages

Maybe you are looking for