Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

Hi All,
I have installed Solution Manager 4.0 (OS -Linux ,Database - DB2) .
Now i need to connect solution manager to the R/3 4.6C
Satellite Systems (DEV, QAS ,PRD) for Solution Monitoring
and Service level Reporting .
I have read the configuration guide , but unable to get clear idea .
1) what users (alos type of user -Dialog , Service, Communication etc) do i need create in DEV , and Test in QAS for solution Monitoring .
2) what exact roles /profiles need to be assigned to these users in satellite systems .
3) what users/roles /profiles needs to be done in SOLMAN system
i have applied all the required plug ins and support packs
in satellite systems and solman 40 ..
Please advice . Your response will be a great help for me .
Satish

Hello Satish,
Just clarify, if u have meant connecting the satellite systems for EWA reports to be precise. Early watch Reports. If its is the case, then repond so that i can putin my inputs which may be helpful for you in this config.
Rgds,
Sri

Similar Messages

How to push tickets from one solution Manager to other Solution manager

Hello,,,,alll
i want to push tickets from one solution manager to other solution mamager. Also the status along with various partnet function to be updated as well.
i have done lot of rnd over it..weent thru all the spro settings......even had my developers work day in day out....but the output is not satisfactory!!!!!
is there any way i can do it only via customizing!!!...no development ....
Achilles!!!!!

Hey Shridhar,
I think you can do this by copy the whole client from one system to another.
Instead of using the ABAP consultants, get in touch with BASIS consultant to achieve this.
I have not tried this, but do let me know about it holds for you.
Reward for usefull answer,
Regards,
Anand.

Forward message between CUSTOMER Solution Manager to VAR Solution Manager

Hello,
we have configured our solution manager for VAR enviroment.
Now we need to connect the customer solution manager to our VAR solution manager to forward the message opened at customer site.
In Solution Manager VAR documentation I found 2 documents (How To: Setup Service Desk 2 Service Desk (Demo) https://websmp207.sap-ag.de/sapidb/011000358700000129912009E.ZIP and How To: Einrichtung Service Desk zu Service Desk Verbindung https://websmp207.sap-ag.de/sapidb/011000358700000025722009D.PDF) but they are not very clear.
Did anyone setup this configuration?
Thanks
Andrea

>
Solution Manager wrote:
> In Solution Manager VAR documentation I found 2 documents
> (How To: Setup Service Desk 2 Service Desk (Demo) https://websmp207.sap-ag.de/~sapidb/011000358700000129912009E.ZIP and
> How To: Einrichtung Service Desk zu Service Desk Verbindung https://websmp207.sap-ag.de/~sapidb/011000358700000025722009D.PDF) but they are not very clear.
Hi Andrea,
- What's not clear?
- What information is missing in the documents?
Just post your questions here in the forum.
(I have not yet configured it on my own.)
Best regards,
Ruediger

Trying to understand "User/Role/Profile Synchronization" and Batch Analysis

Hello,
Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job.
I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile to be included to the full and incremental jobs?
How the incremental analysis logic is built ?
br Janne

Janne,
In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
In terms of CC tables:
VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
VIRSA_CC_GENOBJ >> User, Role and Profile master data
VIRSA_CC_GENACT >> User-action, role-action and profile-action data
VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
VIRSA_CC_SAPOBJ >> Action-permission
VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
Hope this helps.
Regards,
Imanol

Function module to modify the user roles & profiles

Hi All,
I am working on user maintenance and i need a function module to modify the user roles & profiles.
Thanks in Advance.
Phani.

i used the below fms
BAPI_USER_ACTGROUPS_ASSIGN for assigning the roles.
delete the profiles of the user qnd assign the profiles to the user:
BAPI_USER_PROFILES_DELETE
BAPI_USER_PROFILES_ASSIGN
i used the above FMs for my requirement.
Regards,
Phani.

4016: User/Role relationship for user

Hi Guru,
I have a requirement to send email notifications to mulitple users.
I created a adhoc role and tried assigning the users to the role but I am getting this error. I am on R12.1.3
4016: User/Role relationship for user
Where do I pick the user to assign it to the role. Should I use wf_users, fnd_user.
I have the user_name in fnd_user and the name iin wf_users is the same.
v_role_name := 'XX_CUSTOM_ROLE'
v_role_display_name := 'XX Custom Display Role'
   wf_directory.createadhocrole(role_name => v_role_name
                    ,role_display_name => v_role_display_name
                    ,role_description => null
                    ,notification_preference => 'MAILHTML'
                    ,email_address => null
                    ,status => 'ACTIVE'
                    ,expiration_date => NULL);
       for i in v_asset_manger(g_project_id)
-----------v_asset_manger is a cursor which picks up all the assets managers on the project--------------
       loop
            select wfr.name into v_full_name from per_all_people_f papf, fnd_user fu, wf_local_roles wfr
        where papf.person_id = fu.employee_id
        and wfr.name = fu.user_name
        and person_id = i.person_id;
        select count(name) into v_count from per_all_people_f papf, fnd_user fu, wf_local_roles wfr
        where papf.person_id = fu.employee_id
        and wfr.name = fu.user_name
        and person_id = i.person_id;
                    if v_count > 1 then
                    v_name := v_full_name||' '||v_name;
                    v_full_name:= null;
                    else
                    v_name :=v_full_name ;
                    end if;
        end loop;
        wf_directory.adduserstoadhocrole(role_name => v_role_name,
                                            role_users =>v_name);
            wf_engine.setitemattrtext (itemtype      => p_itemtype,
                                    itemkey       => p_itemkey,
                                    aname         => 'XX_ASSET_MANAGER',
                                    avalue        => v_name


Hi Sree,
THanks for your reply. user_name in fnd_user, the role in wf_local_rules are same.
ex. KSURNAJ in wf_local_roles is same as in KSURNAJ fnd_user
Activity Type Function
Error Name WF_DUP_USER_ROLE
Error Message 4016: User/Role relationship for user 'KSURNAJ' and role 'MAIL_TO_ASSET_MANAGERS-1' already exists.
Error Stack Wf_Directory.CreateUserRole(KSURNAJ, MAIL_TO_ASSET_MANAGERS-1, PER, 2680, WF_LOCAL_ROLES,0) Wf_Directory.AddUsersToAdHocRole2(MAIL_TO_ASSET_MANAGERS-1) Wf_Directory.AddUsersToAdHocRole(MAIL_TO_ASSET_MANAGERS-1, "MINUHYE KSURNAJ") XXPA_BUDGET_APPROVAL_WF_PKG.Inside my look XXXX(PABUDWF, 120524, 258610, RUN) XXPA_BUDGET_APPROVAL_WF_PKG.xx_assign_approver(PABUDWF, 120524, 258610, RUN) Wf_Engine_Util.Function_Call(XXPA_BUDGET_APPROVAL_WF_PKG.xx_assign_approver, PABUDWF, 120524, 258610, RUN)

Object Types in User Status profile for Investment managment

Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
Regards
Rama Shanker Sharma

Dear Ram,
User Status can be maintained in the system as foll
Maintain the Status Profile first in OK02
Status no       Status        Short text         Initial status flag    lowest    Highest
10                  NBU            Not Budgeted             ^                10          20
20                  BUD           Budgeted                                      10          20
in
Status
NBU
maintain the required fields as required by your process requirement
Material purchase order
Material purchase requisition
Partially release project
Release etc
and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
Repeat the same logic for
Status
BUD
I hope this solves your problem, if not please write in detail your requirement.
Regards,
Vikat Verlekar

Compliance Calibrator 5.2 user/role/profile sync

I have run into an issue with a user. Where the user is getting flagged as having risks associated in basis for having a combination of transactions. Under CC it is saying that she has S_Develop Auth Obj with Activity 1 and 2. However when we check the user in R3 all of her profiles and roles that have a Basis associated and have the auth object she has activity 3. So the information is not synchornizing properly.
Thanks for any help

when was the last time you ran a user/role/profile synchronization or a batch risk analysis for this user ?
In case you need more info, check : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50cd7177-5c22-2a10-8cba-8e0c64bc4ea8
Regards.

Automatic Selection of "User Status Profile" for Inspection lot

Hi all,
I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
Thanks
Veeresh

You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
You can use 04pppp where pppp = your plant ID. So 041000, 042000, 042010, 043000, 043140, etc...
In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
FF

User Status Profile for Notification PM

Dear Masters,
I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
Hope to find the reply soon. Thanks in advance.
Chin2

Hi Naveen,
Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
STATUS PROFILE: ZP-NOTIF
Status number        Status     description                                          Init      Lowest       Highest      position     priority
         1                    OPEN       Open Notification                                no        1                   1                 1               1
         2                    RUNG      Equip. Running Condition                    no         1                   2                1               1
         3                    NRUN      Non-Running Condition                       no         1                   2                1               1
         4                    CLSD      Closed                                                 no         1                   2                1               1
When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
"Status RUNG is not allowed (QNF 100000000000) " -> ->
Diagnosis
The user status 'RUNG' has reference number 02. In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
Procedure
You can only set user status whose reference number is not higher than 01.
please help me solving this question its a bit urgent.
Thanks once again for your replies.

Solution Manager and external Central Monitoring system

We have a Solution Manager system SOL and a Central Monitoring system
CEN. The monitored system SDS is configured to report CCMS data to CEN
and I wanted SOL to be able to access this data. After configuring SDS
to CEN, CEN that the following entry in RZ21:
SDS#SDS_RZ20_COLLECT#SDS_RZ20_ANALYZE
After performing the wizard in SOL, SOL now has the following entries
in RZ21:
SDS2#SM_SDS2CLNT200_READ#SM_SDS2CLNT200_TRUSTED
This would indicate to me that SOL is reading the CCMS information
directly from the monitored system, rather than via CEN.
In the 'Setup System Monitoring' of Solution Manager the Central
Monitoring System and CEN destination are SOL and NONE respectively.
Is this configuration correct, and if not how do I correctly configure
it?
Is the monitored system now only reporting data to SOL, or is it
reporting to both CEN and SOL?
Regards,

Issue closed

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

Solution manager 7.1 Service desk can be used for multiple customers

Dear all,
Please help me on the below situation
we have configured solution manager 7.1 service desk for one customer , if we have 2 to 3 customers is it possible to use the same service desk
we have 900 ume client has give to customer A here he can raise the ticket and tickets are monitored easly ,if we have two to three customers
do we need create supperate client for them ? if we create supperate client
what about the ume
if we have in a same client for all the 6 customers , eod how to monitor the tickets ?
tickets are in a sequance order
example: customer a ticket number 800000801
customer b ticket number 800000803
after six months if the a customers want all the tickets how to get it ?
You can reach me on 9666633938
[email protected]

Hi,
If you want to send an email when the status is changed please do the following custominzing:
T.Code SPPFCADM
Select appl. CRM_ORDER and Define Action Profile
Enter into action profile SMIN_STD and copy SMIN_ STD_MAIL to ZMIN_STD_MAIL (Include "Z" into the description to identify later)
Select Schedule Automatically and Partner Dependant (select Reporter, Support Team...based on you requirement)
Check in Processing Type that Method, Class and SmartForm is assigned.
Now you have define the action profile.
Come back to T.Code SPPFCADM
Select appl. CRM_ORDER and Condition configuration
Active Technical Names and go trough SMIN_ STD, you should create here the action profile defined in the previous step. In the right side go to button "create" and select the action profile ZMIN_STD_MAIL.
Into this new step go to Schedule Condition Tab where you should create a new definition, when you want that the action is execute (button Edit Condition) where you should create a condition like:
USER STATUS = E0001SMIN0001 (E0001 is the status and SMIN0001 the status profile assigned to the transaction type)
Now you have schedule your action profile
The last work is to configure the t.code SCOT. It should be done by your basis team.
Regards,
Marta Prendes

Solution Manager vs Enterprise Solution Manager

Dear All,
We already have solution manager installed in our SAP System landscape.
But a visiting consultant give a new word to managers about enterprise solution manager with following benefits.
1-If we have enterprise solution manager then SAP AG can access our system and inform us about system health.
2-If we have enterprise solution manager then SAP AG will react on our ticket not on what we send but on the the actual actual condition of system.
3-We can only utilize our support services in a right way if we have enterprise solution manager.
1- Now first where I can check that the installed solution manager is standard or enterprise?
2- The benefit which is listed above is really available in enterprise solution manager?
3- Any tutorial or link defining how to install and configure enterprise solution manager.
Any response will be highly appreciated
regards,
Syed Saifuddin
SAP BASIS Administrator

Dear Paul
Following is the current Status of our Solution Manager
S / W Comp / Rels           / Level           / Highest support Package / Short Desc of Software Component
SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
SAP_BW     700     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP     700     0007     SAPKNA7007     SAP Application Platform
BBPCRM     500     0007     SAPKU50007     BBPCRM
CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST     400     0010     SAPKITL420     SAP Solution Manager Tool
ST-A/PI     01J_CRM500     0000          -     Application Servicetools for CRM 500 / 5
ST-ICO     150_700     0005     SAPK-15075INSTPL     SAP Solution Manager Implementation Cont
ST-SER     700_2006_1     0003     SAPKITLOG3     SAP Solution Manager Service Tools
Bachup Solution I will manage with Tivoli Storage Manager.
But give me a path to upgrade my Solution Manager to EHP1 or Solution Manager Enterprise Edition.
regards
Syed Saifuddin

Solution Manager : TC SOLUTION_TRANSFER , Solution Import Error

Hi All,
I am trying to export a Solution from one Solution Manager to Another.
I have exported the Solution from System A using TC: SOLUTION_TRANSFER , a solution.zip file was generated , now when I get to system B and was trying to import the solution.zip from TC:SOLUTION_TRANSFER , i get a short dump with error " The ASSERT condition was violated" , The zip file is around 128 MB. Does anyone know a way around this situation.
Thanks for your help
Thanks
Uday

Hi Uday,
the parameter icm/HTTP/max_request_size_KB holds a maximum file value for the upload via WebDynpro . The default value is 100 MB. You need to adapt the value to upload a file with size 128 MB. You'll find more details in
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/3e87b3ca6b72d0e10000000a42189c/frameset.htm]
Best regards,
Michael

Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

Similar Messages

Maybe you are looking for