Solution Manager 7.1 Integration with Sharepoint

Hello,
We are trying tio implement Solution docuemtnation in Solution manager 7.1 integrated with Sharepoint. Need any suggestion or guidence to integrate Solution MAnager with Share point.
We want to store docuemtn in share point and would like to provide a link of this docuemnt in Solution MAnager.
Regards,
BA

Is it possible that i can give a url of solution amanager project in portal or in some other frontend from where I can access the docuemtn availablle in the perticulat project in SM using th url. ( without SAP GUI)
A project specific iview maybe if you are using SAP Portal? I have not tried it myself, so I cannot elaborate on the topic.
But project specific documents (if they are being uploaded to MOSS and only web-linked in SolMan) should just be locked/read only and can be access controlled using MOSS security as well. So I wonder why the complication of providing it to everyone on a Portal link, when the webfront end for MOSS should provide you the link and the content can be controlled using MOSS security
Also apart from MOSS is it possibel to use TREX as an search engine.
This would be a possible disadvantage, but you are not missing out on much, because MOSS's context based search is actually better, and i ssay this from personal experience.
Hope that Helps!
Cheers!!

Similar Messages

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Acrobat Reader integration with SharePoint 2007

Hi,
We have been having some major issues with people opening PDF files from document libraries in MOSS 2007.
Firstly in v9.x we find that only one user can access a PDF file at a time because it automatically opens the file as editable. This isn't a problem, however when another user tries to open it instead of being asked to open a read only\local copy, they just get an access violation error. We have found that sometimes even though a user has closed the file, the access violation errors continue and the only way round it is to copy the file locally, delete the original and then copy it back up to the document library.
I see that version X has been written to include much better integration with SharePoint. However our company policy is that we do not use check in\check out, so i'd like to disable this prompt. I've found this article which seems to have instructions on how to do it, however the registry change does not seem to have made any difference. I notice that on that article is says "DO NOT PUBLISH THE DOCUMENT EXTERNALLY UNTIL 10.1 SHIP". I'm unsure whether this is a typo and it's meant to be 10.01 which has recently been released or whether this article should not yet be available.
Has anyone managed to get the registry change working?
Cheers
James

Hi,
I was going to move this to a more appropriate forum but I'm not clear on where to try. Can you repost this under the Reader forum as well as on http://answers.acrobatusers.com/?
thanks,
Ben

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

Can Exchange 2007 to be integrated with SharePoint 2013

Can Exchange 2007 to be integrated with SharePoint 2013?

In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SSRS reports integration with sharepoint 2010

Hi Friends,
Any one can u pls tell me what are the prerequisites for integrating SSRS Reports with Sharepoint.
This is the first time im going to integrate SSRS reports with Sharepoint. Any one pls help me on this.
Thanks in advance.
Regards,
LuckyAbdul

Hi LuckyAbdul,
We can integrate Microsoft SQL Server Reporting Services with SharePoint Foundation 2010 or SharePoint Server 2010 by configuring a report server to run in SharePoint integrated mode. There are some prerequisites for integrating SSRS Reports with SharePoint,
including Report server requirement, SharePoint Products and Technology requirements and Database server requirements in SQL 2008 R2.
The Reporting Services Configuration Manager is no longer required or supported to configure and administer Reporting Services SharePoint mode in SQL 2012. Use SharePoint Central Administration to configure a report server in SharePoint mode.
The configuration steps for this version you need to do in Reporting Services Configuration Manager and In Central Administration, please see the following articles:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Yammer Integration with SharePoint 2010

Hello Team
We integrated Yammer with SharePoint 2010 and everything were working properly, since we updated embeded code with latest yammer its not working properly-
http://success.yammer.com/integrations/yammer-embed/
Following issues are occured-
• In the new yammer feed, I couldn’t find a way to add an attachment or photo to the post. This is a vital component to the functionality of the feed
• In the previous version the feed also had tabbed areas to show different Yammer Areas: ‘My Feed’, ‘Private Messages’, ‘Notifications’, and ‘More >’. Is there any way to keep this functionality.
We also wanted to integrate SSO with our FBA SharePoint 2010 site. But could not found any good article so far. Is there any option by which we can do SSO and all above functionlaity.
Thanks Ranveer Katiyar

Hi,
According to your description, my understanding is that when you add the Yammer feeds app to SharePoint page, it occurs "The
page or app using unsupported version of yammer platform" error.
This maybe related to the Yammer API version has been updated, the solution is to update the Yammer app in site contents.
Here is a similiar thread for your reference:
Yammer App for SharePoint – unsupported version
Here is a detailed useful article for your reference:
"This page or app is using an unsupported version of the Yammer platform" error message when you use the Yammer App for SharePoint
If the issue still exists, I suggest you can check the ULS log error message for more detailed information. By default, the ULS log for SharePoint 2010 is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Dyanmics CRM integrated with sharepoint 2010 foundation - new created account folder can not trigger sharepoint workflow.

I integrated MS CRM 2013 with SharePoint foundation 2010 for document management. integration works.
Now I need to create several subfolders and set proper permission on each folder. So, I created a workflow to do it automatically. It works when I manually create a new folder under SharePoint account, or I manually run it for an account folder. Thus, sharepoint
workflow works as I expected.
However, when I access Account's document from CRM (first time), sharepoint would create an folder for this account. In this case, the workflow doesn't work. and it show error: "Failed on Start(retrying)".
Anyone has experience on similar issues or have clue how to trace this error?

Hi Justin,
From your description, the issue might be related to the workflow created by visual studio.
Could you please try to locate error message in workflow report or ULS log:
https://technet.microsoft.com/en-in/library/cc298927%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
also debug the workflow per:
http://blogs.msdn.com/b/philloth/archive/2009/01/19/how-to-debug-a-workflow-with-visual-studio.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Solution Manager 7.1 Integration into SAP Landscape

Hi All
I have a few questions for all the SAP Solution Manager experts out there and for anyone that would like to take a stab at these questions. An organization would like to implement a 3 system landscape for the following SAP Applications; SAP ERP, SAP CRM, SAP SRM, SAP Portal, SAP XI, SAP BI (SAP BW and SAP BOBJ) as well as SAP Solution Manager. They want to use all the functionality that is available in Solution Manager. The questions that I pose is as follows;
     1. How many Solution Manager systems must one implement? A 3 system landscape or will a 2 system landscape suffice? Bearing in mind that    functionality such as CHARM will be implemented.
     2. Where will the productive SLD reside? How would this SLD connect to the Solution Manager Systems?
     3. To which Solution Manager System will all the diagnostic agents connect to?
Your expert input would gladly be appreciated and points awarded accordingly.
Regards
Deen

Hi Deena,
I good approach would be to use a two system landscape.
Where - all sandbox and development systems are connected to develpoment solman.
and - all other systems, like quality, pre-prod, and prod are connected to production solman.
For CHARM, this is sufficient. Keep the hardware specs on the higher side of production solman.
You should use a separate SLD instance on your solution manager. WHY, incase you need to update the SP level, as SLD needs to be on the highest level, outage from SOLMAN or PI would be avoided.
You can also use, SLD of Solution manager, SYNC you dev sld with prod sld - uni directional sync - eg for stack generation.
SLD connect to your solution manager during solman_setup basic configuration and preparation of your landscape through LMDB.
Check.
SLD and LMDB Topology: Replacing the Source SLD for the LMDB
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/a5/971735dd184f5c8d943c6cf423d13a/content.htm
Connect diagnostic agents to your producitve solution manager.
For more please reply back.
Good Luck !!
Regards,
Divyanshu

Project online / cloud and integration with SharePoint.

Greetings!
I am new user to the project online and trying to understand differences / options for cloud offering.
If we need to use Cloud for project and portfolio management, do we use need to purchase project pro with sharepoint cloud.
What are the option features? Is there a reference document explaining the offering?
Best Regards,
stct...
stct

Stct,
This might help
http://office.microsoft.com/en-us/project/microsoft-project-online-online-project-management-software-FX103802026.aspx
Hrishi Deshpande Senior Consultant

Oracle Identity and Access Management Suite Plus Integration with Oracle ADF

Hi All,
Kindly advice if Oracle Identity and Access Management Suite Plus can be integrated with Oracle ADF based applications to manage the end-to-end lifecycle of user accounts specifically addressing to roles/priviledges and security.
Request you to share links to documentation where I can study the steps to integrate both the frameworks.
Looking forward to hear from you soon.
Best Regards,
Ankit Gupta

Hi Sébastien,
I came across the below link for the required integrations -
Oracle&reg; Fusion Middleware Installation Guide for Oracle Identity and Access Management 11g Release 2 (11.1.2) - …
Oracle&reg; Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management 11g Release 2 (11.1.2) - Co…
Best Regards,
Ankit Gupta

Using saprouter in solution manager 4.0 environment with SMD

I am currently using Solution manager 3.2 (on SAP basis 6.20 technology). We have not used any Solution Manager functionality that necessitated using the internal ITS, thus all access to solution manager SAP has been through sapgui or RFC. Both these protocols can be routed through saprouter and we make use of this fact, having placed non-natting firewalls between both sapgui users ans SAP; and some ccmagents and SAP.
Now we want to move on to solution manager 4.0 with the JAVA stack and also run SMD. We need SMD because we have also begun using SAP Netweaver 04 Enterprise Portal (Java only SAPs) which we wish to monitor with SAP solution monitor. The portals are all on an internet facing eithernet segment outside the non-natting firewall protecting our ABAP SAPs (including Solution Monitor host).
Is it possible to route SDM agent connections to SDM through saprouter? If so, are there any examples?
What about sapwebdispatcher? Can it also be routed through saprouter? examples?
What about SLD? same questions...
What about Mercury Loadrunner?

No! No! I am not interested in using a saprouter between OSS and my http connection that is effectively http://myhost:5xx00/smd. I am wondering about the SMD agent connection to SMD server (and vise versa). The hosts I want to monitor cannot ping the solution monitor diagnostics machine, but ccmsping via saprouter is possible. Can the SMD agent talk to the SMD server via saprouter? Examples? Can the SMD server talk to the agent via saprouter (perhaps different saprouter)?
SMD agent ---> firewall1 --> intranet --> firewall2/saprouter --> SMD server
SMD server --> firewall2/saprouter --> firewall1/saprouter --> SMD agent

EP7.31 integration with Sharepoint 2010

Hi ,
we are integrating EP 7.31 with Sharepoint 2010 server, we can able to see in HTTP header in MYSSO2 ticket cookie,but Sharepoint application can't able to parse the ticket,
Here is the Log :
[Thr 10788]     Initializing SSF Library Version
[Thr 10788]     SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,[aesni],NB
[Thr 10788] Leave function MySapInitialize with rc = 0.
[Thr 10788] Thu Feb 27 07:39:05 2014
[Thr 10788] Ticket is 橁硅䑍杁䅁眹㍢お坙㙷㍚畖䡤牖塙䥏䉁楎塙灎㉙ㅆ䝤汨湢灒㉙う坡甹...
[Thr 10788] DecodeB64Len returns 0. iDecLength=251
[Thr 10788] *** ERROR => Ticket has probably not yet been parsed. [ssoxxext.c   2494]
Thanks,
Balaji

Hi,
No, Project Server 2013 requires SharePoint 2013.
See reference below:
https://technet.microsoft.com/en-us/library/ee683978.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Solution Manager 7.1 Integration with Sharepoint

Similar Messages

Maybe you are looking for