Solution to create scrolling "news" on website which client can update

Hello all,I'd like to create a news scroller for a client
website i am building where they can update the content in a MySQL
database and the results get pulled ino the site into a scroller
feature that will transition through all the topics listed.
Can anyone point me in the right direction or assit me in getting
started? I realize that Java is probably the best solution
but wasn't sure if Spry might also be a possiblity. Thanks in
advance for the help..Josh Henry

What I use is pretty simple and it suits me fine and the look
and feel
was ok'ed by the deisgner and seems to please people using
this site
(www.brittanyclub.org)
a div with a auto over flow as exampled below
.GeneralNews {
overflow: auto;
left: 5px;
top: 180px;
right: 340px;
position: relative;
height: 342px;
width: 300px;

Similar Messages

Need create a new control key, which message control is "error mode", then PR or PO

Hi All,
Can please help me I got an issue in QM ,
Issue Description :- Current QM control key for supplier validation date is “0001”, the message mode is only warning. PR or PO still can be created forcibly. Need create a new control key, which message control is “error mode”, then PR or PO cannot be created successfully.
I thing should add some additional logic using BADI or USER-EXIT.
can please help me how to find BADI or USER-EXIT if you know the appropriate BADI please let me know.
Regards,
Nani

Hi,
I tried that way I entered message control as Defect even purchase requisition is created how can I restricted purchase request ion.
Regards,
Nani.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

How do I remove iMessage "sign in" box from my IPad "messages" screen. I don't want to create a new Apple ID but I can't close this box.

When selecting the "Messages" sceen on my IPad, the iMessage "Sign in" box appears on the screen. I don't want to create a new Apple ID but I can't close this box which is preventing me using the normal text message screen. How do I get rid of this sign-in box?

Yeah i have that same type of problem, sorta.
I made my apple id today on my ipad 2 ios 6 update and i went straight to logging in on iMessage, i logged in, after reading i clicked next, i got the email to verify on my ipod so i verified but as it was still verifying on the ipad it went right back to the log in box. this repeated itself over and over, help?

My wife and my iphones are both on the same apple id. If I create a new apple id for her, can we still share our music?

My wife and my iphones are both on the same apple id. If I create a new apple id for her, can we still share our music?

Yes. If you are using two different instances of iTunes on your computers, make sure the music is on both copies of iTunes.
The person with the new Apple ID will not "own" the music, as it is owned by the one with the former ID. But the way to deal with this is for the new ID person to do Store > Authorize This Computer from iTunes' menu, then have the person with the ID that purchased the music enter his/her Apple ID and password.

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

You have two separate questions here...
To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

Restoring the iPhone will reload its firmware.
Plug the iPhone into (the current version of) iTunes on your computer.
Let it sync. Then choose "Restore" from the iPhone's summary page in iTunes.

READ_TEXT can read text form sap .Which function can update this text?

Which function can update/edit the text that readed by function READ_TEXT ?

Hi,
Check SAP help on SAVE_TEXT
http://help.sap.com/saphelp_40b/helpdata/en/d6/0db8ef494511d182b70000e829fbfe/content.htm
OR
http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/Z_TASK_LIST_LTEXT_UPLOAD.html
Cheers
VJ

Error when using ANY "save site as template Include Content" solution to create a NEW Site Collection

Here is the scenario. (SharePoint 2013)
In Dev/Test/Prod any Site that we Save as Template and include content and then, Download and try to use in a new Site Collection errors out upon use "List does not exist" error.
This occurs with ANY Site, even OOB Team Site template that is immediately "Saved as Template".
We can do this in any other environment (we have several test labs 1 in O365 and 1 in VM that is very OOB)
We can take the site solution from the environments we're having the issue in and use them successfully in our Lab environments (on prem or in the cloud).
We have also tried taking Site solution from lab environment (where we know it works fine) and tried to use these in Dev/Test/Prod and they also error on us.
In the Dev/Test/Prod environments that have the issue if we DO NOT include content, the template works just fine to create a new site collection with the template.
Keep in mind we're talking about environment with no 3rd party apps, no custom code, just 2013 SharePoint with all patches and CU up to June 2013, AND this is ANY template even a vanilla OOB template without anything in it.
You can always save site as template including content, download/upload it to new site collection solutions gallery and activate it without any issue... it's only if you try to use these templates to create a site that the error occurs.
Any thoughts on this?
J

I also experiencing the same issue. I also tried to create a new site-collection using publishing site template, resulting in "list not found" error.
Later I tried just a team-site (with content) -> the same error.
The error appears on two different (post SP1) farms. That's why I tested the site-collection creation on an old (pre SP1) farm: the error doesn't exist. Site-Collections are created properly.
My conclusion is: either SharePoint SP1 or a later CU causing the error.
Regards,
Valerian

Can I create a new Queue/Topic in client application?

In sun's JMS turorial the application client sends messages to the queue, which is created administratively, using the j2eeadmin command. Can I create a new destination(queue or topic) in my client's code?
Thanks very much.

Thank you very much, flhood. This is my first time to gain aid from website except my school's BBS.
But I still cann't solve the problem, here is my code, can you help me to check it if there is anywhere that I might do wrong?( I omit the try/catch part)
QueueConnectionFactory queueConnectionFactory =null;
QueueConnection queueConnection =null;
QueueSession queueSession =null;
Queue queue =null;
Queue tempQueue =null;
QueueSender queueSender =null;
TextMessage message =null;
final int NUM_MSGS;
Context jndiContext =null;
jndiContext =new InitialContext();
queueConnectionFactory =(QueueConnectionFactory)jndiContext.lookup("QueueConnectionFactory");
queueConnection =queueConnectionFactory.createQueueConnection();
queueSession =queueConnection.createQueueSession(false,Session.AUTO_ACKNOWLEDGE);
queueConnection.start();
queue =queueSession.createQueue("MyQueue");
tempQueue =queueSession.createTemporaryQueue();(Actually I don't know why I shall need a tempQueue if I have the queue.)
queueSender =queueSession.createSender(queue);
message =queueSession.createTextMessage();
NUM_MSGS=10;
for (int i =0;i <NUM_MSGS;i++){
message.setText("This is message "+(i +1));
System.out.println("Sending message:"+message.getText());
queueSender.send(message);
These codes run well if I lookup in the JNDI for the existing queue "MyQueue", but when I try to make it dynamically, the resutlt shows(I only use texteditor+j2sdk1.4+j2ee1.3.1):
Java(TM) Message Service 1.0.2 Reference Implementation (build b14)
Sending message:This is message 1
Exception occurred:javax.jms.InvalidDestinationException: No Destination found f
or name: MyQueue
I use deloytool to check the destionation, of course the "MyQueue" hasn't been created, but I use try/catch to brace these two line:
queue =queueSession.createQueue("MyQueue");
queueSender =queueSession.createSender(queue);
Nothing gain.
They are really puzzling me!

Create a new web application, how shall I update the file server.xml

Hi,
I will create a new web application, i.e named newApp. Then I create a file structure as follows:
- <server-root>/newApp
- <server-root>/newApp/WEB-INF
- <server-root>/newApp/WEB-INF/classes
Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
I use windows XP Pro, and Tomcat 4.1.27.
My server.xml file looks like below:



<Server port="8005" shutdown="SHUTDOWN" debug="0">


<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>


<Service name="Tomcat-Standalone">


<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>












<Engine name="Standalone" defaultHost="localhost" debug="0">



<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>


<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>







<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">





<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>

<DefaultContext reloadable="true"/>

<Context path="" docBase="ROOT" debug="0"/>

<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>




<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>username</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>url</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>
</Server>

To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
You have to add a <servlet> element to this file.
Something like this:
<servlet>
<servlet-name>blabla</servlet-name>
<servlet-class>blablapackage.Blablaclass</servlet-class>
<init-param>...</init-param>
</servlet>
Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d. Can anyone please help me on this issue?

Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??

Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes. Can anybody advise?

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpful

Hello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/

Due to my account being hacked, I changed my Apple ID, I did not create a new account. Now my software updates want the old ID but will not accept the password. How can I update built in software.

My orginal Apple ID was hacked, so I changed my Apple ID. I did not create a new ID. I have changed my ID on my profile on my MacBook Pro. However now I have an update for factory installed software iPhoto and iMovie that is asking for the old ID. How can I get the updates or force them to use the new ID that I am using for every other Apple product I own.

You'll have to talk to Apple about AppleID and account issues, we are just other users here.

Solution to create scrolling "news" on website which client can update

Similar Messages

Maybe you are looking for