[Solved] Can't find zsh in the repositories
After messing with my system, I discovered that alot of the core packages hadn't been updated.
After removing the nouveau stuff, and adding libdrm-git (I think was the package) everything updated this morning....
All well and good.
When I came home, and looked at the report, zsh and some other packages were reported as not being found in the AUR. I'm curious why?
I did a search on the website for zsh, and the zsh package itself (that provides the shell) didn't show up, but the config, lovers, neo, yaourt, etc did.
So what happened to the package? I remember reading that some packages were deleted or something by mistake a while back... Was this one of them? if so, when will they be restored?
TIA,
Last edited by Knute (2009-09-10 22:32:39)
I did some digging and found some wierdnesses that apparently caused issues.
In /etc/yaourtrc, I had pacman-color as the PacmanBin.
In /etc/pacman.conf I had /usr/bin/airpac %u %o in the XferCommand.
I commented the XferCommand out in pacman.conf and changed the pacman-color in yaourtrc to run powerpill.
Well, everything is now being found and successfully updated.
I think it may have been something with airpac, but since it's working now, I'm not going to worry about it.
Similar Messages
-
Where is x2x, I can't find it in the repositories.
Hi,
I preformed a new system installation (systemd) and I can't find x2x.
How can I install it?
Sorry if I'm missing something.
Thanks great community!Quickest/easiest would be to make a PKGBUILD yourself and upload it to AUR, you can find the old one here:
https://projects.archlinux.org/svntogit … 53195f1741 -
Tonight, for example, I have many tabs open which I'd like to close but re-open tomorrow.
I'd like to save them all as "April 30" in my Bookmarks... the 0ld version allowed me to do this, but I can't find this in the new version.
The only way I don't seem to lose those open tabs I'm working with is by doing "Contol + Delete", but I know this shouldn't be done all the time...
There must be a better way, but if there isn't, would I be able to get back and work with the old version?Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.
-
This is about addons. I have read the support article on finding and mana addons and it didn't solve my problem. I can't find some of the addons I installed although they appear on the list of addons installed on the tools addons page. Some are on the long press menu but those I can't find include bluhell, tap tap wrap, tap translate and add block edge.
They appear on the Add-ons list as being enabled, but there doesn't seem to be any user interface to actually use them?
I haven't experimented with those particular extensions. If you don't see what the screen shots on the add-ons site show, usually there is a support link for the extension, or you may find usage tips in the reviews from other users who ran into the same problem. -
I've been uploading audiobooks from Overdrive and now that I'm done listening to them I want to delete them. After I hook my Ipod 7th gen up to the comp, it pulls up iTunes and I go to Music but I can't find any of the book titles there. They all show up in my songs group on my iPod. I've been manually managing the songs so I don't get all my husbands stuff on there. I've cruised through the other sections and tried searching the library without any luck. Any advice???
Follow the instructions here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?
You may be able to find your Apple ID at Look up your old and forgotten Apple ID
-
How do I transfer my play lists from one pc to another? I can't find import on the new version.
Holtey wrote:
Not an option.
Onlly have turn on home sharing or get artwork
Do ou have the iTunes menus showing across the top of the iTunes window?
ctrl B -
I want to use Firefox on my Win 8 desktop. i want to move my favorites, settings and add-ons to a new Win8 laptop from my old Win 7 machine. I know how to do it with Win 7 machines by moving my profile. I can't find appdata on the Win 8 PC to move the profile to.
I will also want to do the same with Thunderbird.The easiest way is to use Sync.
You can find it in Tools / Options.
You'll always have settins, bookmarks, saved passwords, history synced between you computers (and Android devices). -
I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.
How do I print just 1 page out of 14 pages .
I don't see any settings on my iPod and can't find settings on the printer .
Can someone help with this problemGoogle show that you have to cut what you want to print and then paste it into a new app and print from that app.
http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html -
I rented a movie on my computer and transferred it to my iPad mini. I see it was purchased on my computer in my account and the charges for it and can even see where it is on my iPad on the computer but can't find it on the iPad itself. It is not in Videos. I have this problem every time I rent movies and somehow I eventually find it but I don't know how it eventually gets on the iPad. I'm leaving on a trip and want to watch it on the way.
You move the movie from iTunes to iPad (tap to enlarge image)
Movie will be moved to the Videos app. -
After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ -
I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?
In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
How to export contacts from Outlook for Windows. -
I can´t download skype to my new macbook pro, I can´t find it in the App Store, do you know why?
There are a number of developers who have chosen for various reasons not to offer their software through the Mac App Store, so don't assume that if an application is not in the App Store that the application is not available. It may well be available directly from the developer or some other download site. MacUpdate is a good resource for looking for applications:
http://www.macupdate.com
Regards. -
My ipod was stolen, can I find out what the serial number of it is, based on looking at a connection history in my itunes? How would I do this? I didn't register it. I think I found the guy selling it, just looking to confirm the serial number and I'll make a phone call to the police.
Thankskevilay2013 wrote:
is this possible?
Yes.
Open iTunes on the computer you used to sync the iPod and select Preferences… from the iTunes menu.
Select the Devices pane. Position the cursor over any of its backups. The iPod's serial number will appear in a popup window. -
I have replaced my faulty hard drive on my macbook air 1.1 with a new ssd, I need to reinstall the original software,where can I find this on the apple site?
There is no download for the software. The factory software that you are looking for is called ilife. It is all of the software that would have came preinstalled with your mac on your original hard drive when you first bought it. You will have to get new software on your computer. This might actually be a great opurtunity to upgrade to Lions. Search the Lions software in the mac store and it will come up. Click add to cart and check out. The price for it is $20. I defientely recomend Lions, it has alot of new great features. Then wate for the install disk to come in the mail. when it come just pop it in and follow the step by step instructions. If you dont want to upgrade to lions however you can download the ilife package from apple.com for a small price. Hope this helps.
Maybe you are looking for
-
Logitech V270 BT mouse - I'm not satisfied
Friday I bought a Logitech V270 BT mouse. As I already own a wireless apple keyboard, my idea was to get a BT mouse so that I don't have to use an additional USB-receiver. The wireless mighty mouse hasn't convinced me because the button selection by
-
Table of Contents and Section Numbering ??s
Hi, we are using CS6 and have a couple questions about trying to use automated section numbering and table of contents in a single document. We don’t do this often (actually, never used auto-TOC before), so I just want to see if I’m missing something
-
How to tranfer purchases with iTunes 11.0.4.4
HI All, I've just connected my iPhone 4 to iTunes (which i've not done for a while) but I can't seem to find the transfer purchases option which used to be available in previous versions of the software. To confirm the PC is authorised under my accou
-
How to Install Powershell 3.0 in Windows Server 2007
Hi, Could you please let me know the steps to install Powershell 3.0 in Windows Server 2007 Ent. Regards,
-
Move Photos from one Library to another
How can I move pictures from one library to another in Iphoto 11 ?