[solved] cannot boot from dd usb and cannot install 64 with unetbootin

hi,
been trying to install arch for almost 24 hours now. i just cannot manage to setup USBs to boot from.
first i was using unetbootin, but when the device not found error came up i tried using the methods recommended in the wiki. however, my hp elitebook 2540p cannot boot from the usb created using dd or imagewriter. so i went back to unetbootin and figured out the error was that the syslinux.cfg file needed to have ../../ replaced by archisobasedir=arch archisolabel=KINGSTON. now however, i cannot seem to figure out how to install a 64 bit system. when i run pacstrap all packages have i686 at the end, which i assume means its the 32 bit one.
help
EDIT: ok i have now used 3 different USB sticks and run
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
on them. plugging them into the 2540p the laptop just wont boot. it wont get past the first hp screen, where i normally press esc to enter the menu so i can choose boot options. the usb just blinks and nothing happens. this same problem happens with imagewriter in windows.
Last edited by iOfWhy (2012-07-29 13:01:10)

McDoenerKing wrote:Was the usb stick mounted, when issueing the dd command?
Did you use "of=/dev/sdx1" instead of "of=/dev/sdx" for the dd command?
Which image did you use?
i wrote exactly
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
as mentioned in the edit above, the computer wont get past the hp screen where one gets the option to press the esc key... the usb just blinks and nothing happens...
EDIT:
no the usb was not mounted...
the image was checked with both sha1sum and md5sum...
EDIT2:
ok so i think i am in... i reformatted the usb with fat filesystem, and then went through the second instructions from the wiki, ie installing "Without overwriting the USB stick"... But i am still wondering why i couldnt just do the normal dd method. Is it that the hp bios cannot read certain filesystems?
Last edited by iOfWhy (2012-07-28 13:39:40)

Similar Messages

  • [SOLVED] Cannot install KDE with python-numpy pre-installed?

    Hi, all
    I am with xfce currently and though of tring KDE. However when I  tried to install KDE it turns that there are confilicts between 'kde' and 'python-numpy':
    :: Proceed with installation? [Y/n]
    (318/318) checking keys in keyring [####################################] 100%
    (318/318) checking package integrity [####################################] 100%
    (318/318) loading package files [####################################] 100%
    (318/318) checking for file conflicts [####################################] 100%
    error: failed to commit transaction (conflicting files)
    python2-numpy: /usr/bin/f2py2 exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy-1.8.0-py2.7.egg-info exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__config__.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__config__.pyc exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__init__.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/__init__.pyc exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/_import_tools.py exists in filesystem
    python2-numpy: /usr/lib/python2.7/site-packages/numpy/_import_tools.pyc exists in filesystem
    Can anyone help please?
    thanks,
    ps:
    python-numpy was installed via "pip install numpy" instead of "pacman -S python-numpy". Could this cause any problem?
    Last edited by hellolj (2014-03-02 06:15:30)

    circleface wrote:
    hellolj wrote:By that, does it mean I should always stick to using "pacman" instead of "pip install"?
    Generally it is less pain to stick to pacman only.  Using anything else would mean pacman cannot know what packages certain files belong to, similar to what you ran into here.
    Got it. Seems I have to reinstall my python packages from scratches again.
    Thanks to all the help.
    SOLVED.

  • I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
    Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
    Here is the longer version I've been compiling:
    Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
    http://support.apple.com/kb/HT5446
    Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
    I have sourced some additional information here:
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
    If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report >  Serial ATA and the drives should show up as discrete drives with their info listed separately.

  • Can Satellite L40-139 boot from a USB device?

    Hello,
    I have a new L40-139. Looking through the BIOS I cannot find an option to boot from a USB device such as a USB HDD or USB flash drive. Could someone confirm if teh L40-139 can boot from USB, and is so how to configure the BIOS for this.
    If it cannot does anybody know if there are plans for a BIOS update that would allow this?
    I have to admit that while I like the L40, I am disappointed at how limited the BIOS is.
    Thanks,
    R

    Hello
    I am not 100% sure but, as far as I know, you can not use USB HDD as first bootable device. USB FDD yes, but with external HDD it will not work.

  • Booting from external USB drive

    I was wondering if there is any way to boot from a USB drive that I have? I partitioned the drive, erased it, and its basically ready to go. But I can't install Mac OS X on it because it says that I cannot reboot from the drive.
    I know that iBook G4s generally can't boot from a USB devise but is there any way to get around this?

    If you're computer is having kernel panics there's a conflict; either software or hardware. 2GB of free space isn't enough but I haven't seen anything that suggests KPs are caused by too little free space. Your computer should start fine with 2GB free. It may have problems after a period of use but it would startup and run.
    Try starting in Safe Mode. If successful move some of your files to the external drive and then restart normally. If it KPs again, restart in safe mode and disable all startup items in System Preferences>Accounts>youraccount and restart. If it KPs again go through the linked troubleshooting steps by Dr. Smoke step by step. That's the only way to resole your problem.

  • My compaq cq62-214nr will not boot from a usb flash drive

    I have a Compaq CQ62-214 NR Notebook. When I enter the bios boot options screen with F9 there is a blank space where Boot from USB/Flash Drive should be. If I enter the bios setup and move usb flash drive up to the first option above Notebook hardrive and Internal CD/DVD Rom ,save the changes to the BIOS then Reboot. Enter the boot options screen again the blank line moves up to the first choice slot but still is blank. If I press enter over that black option the computer does not boot from the OS I have install on the usb flash drive it just starts its normal windows boot screen. YES I have upgraded the BIOS to the lates version F.37
    Can somone tell me what is wrong.

    Try booting into the one time boot menu.
    Step 1: As soon as you turn on the computer on the hp invent screen keep tapping F9 key.
    Step 2: you will get boot otions such as hard drive, optical drive, USb drive
    Step 3: You can hit enter on the usb flash drive. Should boot from the os on your flash drive
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Problem To Boot from a USB

    I have a HP Pavilion 15-n003TX model laptop with me.I have a problem when I try to reboot from a USB device.I am unable to open the boot menu .I have tried all  the possibel keys F12,F9,F10. But I am unable to open the boot menu.Is there any otherway to boot from a USB device?

    Repeatedly tap the F10 key when you start the computer.  Disable Secure Boot and enable Legacy boot.  Then you will be able to change the boot order.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Satellite L20-100 can be booted from external USB hard drive?

    I recently bought Toshiba Satellite L20-100 and I wonder if:
    1. is there any possibility to boot this machine from external usb hard drive?
    2. it is possible to attach another internal hard drive?
    Supposing that the both answers above are 'no', how can I solve the following problem: I need hdd space, I need to boot 3 separate Wxp Operating Systems onto the same machine (Toshiba Satellite L20-100).

    Booting from external USB HD - "No" would be the official, mcrsoft sponsored, answer. However, it is possible. Not easy but it can be done. I've seen it done with my own eyes and there are guides how to do this. Just look for it with search engine. But if you have enough disk space you better do what was suggested here - create 3 partitions and use boot manager.

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • X121e can't boot from external usb cd rom

    Hi all,
    This has kept me busy all day. Read many threads and tried lots of things...but to no avail. I hooked up an external cd-rom drive tot my X121e and changed the boot order to start with the USB drive. Somehow it just doesn't want to boot from cd-rom....Played with the UEFI settings, tried different cd-roms and dvd-roms, but nothing works. It sounds like the X121e is rebooting itself when it reaches the cd-rom drive (the screen stays black so I can't tell for sure).
    When I boot from a different laptop the drive works straight away.....
    Did anyone succeed in booting the x121e from an external cd-rom drive?
    Thanks in advance!!!
    usb4life

    Did you try an DVD drive instead? Do you have the most recent BIOS firmware?
    I was able to boot my X121e from an external DVD writer but I havent't tried a CD-ROM.
    What does happen if you try to boot? Can you be more verbose?
    Are you able to bring up the boot device selection menu? Is the drive being listed?

  • Portege A100 PPA10A - Will BIOS update allow to boot from a USB device

    Hi,
    I have an Old Portege A100, Model: PPA10A-0002LP, but I can't seem to find that model on any Toshiba website, closest I've seen is the " PPA10A-0002L".
    I'm wanting to see if there's a BIOS update that will allow me to Boot from a USB Device.
    The issue I am having is that I need to reinstall Windows, but the CD ROm cant read discs.
    It does Network Booting PXE, but i'm new to this sort of thing and have absolutly no idea what to do there.
    Any help would be great,
    Thanks

    Hi
    Portege A100 seems to be developed only for Australian market.
    As you said there is a Portege A100 PPA10A-0002L model number listed on the Toshiba Australian page but the Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A.
    So in my opinion the BIOS should work too.
    Anyway, I doubt that the BIOS update will add any further booting options.
    Usually the BIOS support the booting from CD/DVD drive, HDD, LAN and USB FDD.
    It should be possible to boot from a bootable diskette using an USB FDD drive.
    I doubt you would be able to boot from USB ODD since this Portege A100 supports an internal CD/DVD drive.

  • Can't boot from a USB

    Hi guys,
    Fist my laptop is a Toshiba satellite P870 and I've been trying for weeks but I can't boot from a USB, I mean, I've been used programs like: power ISO, ultra ISO, Linux live USB creator and nothing! But if I try to doing it in other notebook or PC with the same USB it boots without any problem. So I would like to know if theres a trick or something that I'm missing.
    By the way it happens the same when I try to use a CD or DVD, bootable, of course.
    Hope you can help me out!

    Have you set your boot Priority so that the USB is highest?
    Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
    Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

  • Tecra M2: Can I Boot from External USB/Firewire-HDD ???

    Hi All,
    how can I boot from an external USB Drive ?
    The Bios 1.20, 03/15/2004 doesn't seem to support this on my Tecra M2.
    I have an Maxtor 300Gig external HDD which can be connected via Firewire or USB. Usually I am using an Firewire PCMCIA-Card to connect this HDD, which has 3 partitions on it.
    Would it also be possible, to Boot via PCMCIA-Firewire ?
    Many thanks in advance.
    Lembong

    Hi
    As far as I know its not possible to boot from a USB HDD. I know that in some cases its possible to boot from compatible USB FDD and CD/DVD drives but note from HDD.
    This theme was disused a lot of time here in the forum.
    Please check this other posting:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4534&messageID=14824#14824
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8963&messageID=31325#31325
    Regards

  • How do I boot from a USB flash drive?

    I have two different Toshiba laptops. In the BIOS settings I only see the following options.
    Laptop 1:
    CD/DVD
    FDD
    LAN
    HDD1/SSD1
    Laptop 2:
    HDD1/SSD1
    HDD2/SSD2
    eSATA HDD
    CD/DVD
    FDD
    LAN
    Is it possible to make either computer boot from a USB flash drive?
    Thanks in advance for any help,
    yeto

    FDD (Floppy Disk Drive) equates to USB in my Toshiba laptops. Seems like it's taking some BIOS designers a long time to catch up with the rest of the computer world!
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    Bahamaguy wrote:
    I have a MacBook pro late 2011 version it's not booting up ....
    So what you want is to be able to boot from OS X and retrieve your files
    Create a data recovery/undelete external boot drive
    Of course if it's not booting up, it's easier to fix in place
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
    ...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
    "Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
    If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
    If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
    Most commonly used backup methods
    So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
    There is no Startup Manager option to choose what to boot from?
    This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
    What did you use to make the external OS X USB bootable drive?

Maybe you are looking for