3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

I've updated a WP 8.0 application to WP 8.1 Silverlight. When I try to deploy a demo application I get the following error;
3201: The publisher display name, FooBar, specified in the package doesn’t match the publisher name,
FooBar, that’s associated with the developer account.
I've seen several cases with people encounter this issue and then solved by modifying WPAppManifest or the Packages file. My problem is that the
display name and publisher name is exactly the same. Both in the application xml files and in the error message displayed by windows phone store.
Any suggestions?

There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
So it is working as designed and specified.

Similar Messages

I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas

I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas?

Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.

# Question
It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
Does anyone have any ideas or suggestions?
How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''

See:
*https://support.mozilla.com/kb/Downloads+window
*Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history"

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

[svn:fx-trunk] 8437: Change the TextInput border stroke to a solid opaque color so it matches the TextArea border when baseColor is applied .

Revision: 8437
Author:   [email protected]
Date:     2009-07-07 16:52:58 -0700 (Tue, 07 Jul 2009)
Log Message:
Change the TextInput border stroke to a solid opaque color so it matches the TextArea border when baseColor is applied.
Bugs: SDK-18511, SDK-22097
Doc notes: none
QE notes: none
Reviewer: XD
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18511
    http://bugs.adobe.com/jira/browse/SDK-22097
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/NumericStepperTextInputSki n.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextInputSkin.mxml

That's one of the problems with liquid (%) based layouts. In your default.css file, replace the top 2o selector rules with the following:
body {
    font-family: Verdana, Arial, Helvetica, sans-serif;
    font-size: 12px;
    color: #333;
    margin:0;
    padding:0;
    background: url(images/main-right.png) repeat-y;
.thrColLiqHdr #container {
    width: 95%;
   min-width: 870px; /**keep page from collapsing**/
    margin:0 auto;
    background: url(/images/halftone1.png);
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Ocs package does not match the current software components

Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satish

Hi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny

Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!

Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

OCS package does not match the current software component vector

Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector"

"emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus

HT3529 How do you change the settings so when you search your iPad it doesn't show the iMessages?

How do you change the settings so when you search your iPad it doesn't show the iMessages?

You could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.

The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert head in pt 2 code.

At the end of the part 2 tutorial, this was the code:
@charset "utf-8";
/* CSS Document */
#container {
width: 968px;
background: #FFF;
margin: 0 auto;
padding-left: 10px;
padding-right: 10px;
overflow: hidden;
}#main_image {
background-image: url(images/main.jpg);
background-repeat: no-repeat;
#container #main_image {
height: 376px;
width: 968px;
#left_column, #center_column, #right_column {
width: 316px;
float: left;
#center_column, #right_column {
margin-left: 10px;
The part 3 tutorial instructed this:
Copy the <script> tags from the Edge Web Fonts site, and paste them into the <head> section of index.html in Dreamweaver just above the <link> that attaches the style sheet like this:
<head>
<meta charset="utf-8">
<title>Check Magazine</title>
<script src="http://use.edgefonts.net/sarina.js"></script>
<link href="styles/check_cs6.css" rel="stylesheet" type="text/css">
</head>
As you can see from the code at the end of part two (listed at the top), there is no reference to <head> anywhere in the code; therefore, I am uncertain as to where to insert these code instructions.

I assume that the embedded tags are in the index document, not the styles type document?   I appreciate the information, but I don't see how it relates to my question. Maybe your answer was just over my head? My original question was: If the instructions say this:
Copy the paste them into the section of index.html in
Dreamweaver just above the that attaches the style
sheet like this:
and there the word does not appear anywhere on the index file that I can see it (whether it's embedded or otherwise), where do I insert the code?
Date: Fri, 8 Feb 2013 10:29:29 -0800
From: [email protected]
To: [email protected]
Subject: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert <head> in pt 2 code.
    Re: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert in pt 2 code.
    created by Nancy O. in Dreamweaver - View the full discussion
The pair of and tags are an integral part of any HTML document. When you create a new page in DW, it automatically creates the core HTML tags for you, so in that regard, there's nothing for you to add except content and styles. Embedded CSS styles are inserted inside the document's tags like so:       body      #LeftSideBar       #RightSideBar      #MiddleContent
External CSS is a separate physical file to which all your HTML pages are linked. Similar to above, links to external style sheets go inside the tags like this:
HTML & CSS Tutorials - http://www.html.net/http://w3schools.com/ Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5058678#5058678
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5058678#5058678
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5058678#5058678. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'

Hi,
There are three different types of APs associated with controller and working fine.
1.       AIR-LAP1252AG-E-K9
2.       AIR-LAP1522AG-E-K9
3.       AIR-CAP1552E-C-K9
WLC is AIR-CT5508-K9. Software version is 7.4.100.0. Field Recovery Image is 7.0.112.21. Firmware version is FPGA 1.7, Env 1.8, USB console 2.2. WCS is 7.0.240.0 for Windows.
WCS is sending alarms for AIR-LAP1522AG-E-K9:
Message: AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'.
Before Controller was 7.2.4 (not sure).
Country configured on WLC is AE and shows -CE regulatory domain. Mesh APs are also associated.
I believe this Critical alarm should not come.
how much is this alarm important? What should be done to resolve this?

Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
Sent from Cisco Technical Support iPad App

3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

Similar Messages

Maybe you are looking for