[solved] Cannot launch cinnamon-settings - missing image module

Hello,
When I try to run `cinnamon-settings` it fails with the following message:
[orschiro@thinkpad ~]$ cinnamon-settings
No module named Image
However, I seem to have installed all relevant packages:
:: python2-imaging and python2-pillow are in conflict (python-imaging). Remove python2-pillow? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: cinnamon: requires python2-pillow
Any ideas?
Last edited by orschiro (2013-11-09 07:51:01)

orschiro wrote:
Hello,
When I try to run `cinnamon-settings` it fails with the following message:
[orschiro@thinkpad ~]$ cinnamon-settings
No module named Image
It may be that there is a file missing in /usr/lib/cinnamon-settings/modules, or code missing from one of the files in that folder. I honestly couldn't say because development is going so fast.
@orschiro: Which versions of the cinnamon and cinnamon-settings-daemon packages do you have installed?
@Karol: It may be unrelated seeing as pam is a separate package to cinnamon-settings-daemon, but I wouldn't rule it out just yet.

Similar Messages

[Cinnamon] Can't launch cinnamon-settings from menu.

Hi all,
I've just put together a fresh install with gdm and cinnamon, but I can't launch the cinnamon-settings widget from the settings button (on the bottom left)
From what I've gathered in my forum / wiki / google searches, this isn't too uncommon. However, unlike in those cases, I can launch the settings widget from the console. I can also navigate through it, except it doesn't actually *do* anything when I change settings. This is somewhat annoying, as I want to theme the desktop / set up my multi-head configuration properly / change the background.. you get the picture.
This is what I have installed:
[wfaithfull@mjolnir ~]$ pacman -Ss | grep cinnamon
community/cinnamon 2.4.8-1 [installed]
community/cinnamon-control-center 2.4.2-3 [installed]
community/cinnamon-desktop 2.4.2-1 [installed]
community/cinnamon-menus 2.4.1-1 [installed]
community/cinnamon-screensaver 2.4.2-1 [installed]
community/cinnamon-session 2.4.3-2 [installed]
community/cinnamon-settings-daemon 2.4.3-1 [installed]
community/cinnamon-translations 2.4.4-1 [installed]
Can anybody point me in the right direction?
Last edited by amicable (2015-05-11 14:00:23)

Wow, this was stupid. I hadn't used cinnamon before - I thought it looked a lot like GNOME.. and guess what, it IS GNOME. that's why the settings don't work. My problem is that GDM picked the wrong session. Jesus.

Cannot launch X - Drivers missing? [SOLVED]

Dear Arch community,
I have gone through the installation but now I fail at starting X. It says that it could not find any screens. I thought that this is probably the case, because I did not install the right drivers. My thinkpad from the T series uses Intel 4000 graphics. Could someone please forward me to the proper drivers? I've tried xf86-video-intel.
the lspci:
Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Thanks for any help, I am a little new to Arch Linux.
edit: just mis configured something - sry to bother you
Last edited by 3xp10r3r|X13 (2012-08-26 14:29:17)

Thanks for the quick reply. I spelled something wrong in the conf files -.-
Took me a long time to find it..sry to bother.

[SOLVED] Apache won't start; missing 4 modules

Hello,
Not sure if this is the correct place to post this, but httpd won't start after an update.
First it claims each of these 4 modules are missing:
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
If I comment these in httpd.conf, the error changes to
httpd: Configuration error: No MPM loaded.
Can anyone please help?
Thanks!
Last edited by r0cz (2014-03-15 16:45:22)

progandy wrote:
nparasta wrote:Oh okay. Yes I actually removed them. In httpd.conf I had set some apache settings, though most of the settings were on their default values. I should maybe re-install apache to get the new files back and redo my settings since the files are so different.
You might want to do that. that is why pacdiff offers the merge option.
PS: Here is an overview of the changes between 2.2 and 2.4: http://httpd.apache.org/docs/2.4/upgrading.html
This solved my problem. Thank you for all your help :-)
Last edited by nparasta (2014-03-24 06:47:01)

[SOLVED] Cannot build Cinnamon 1.6.7-3 due to 404 URL error

Hi ,
just attempted to build and install Cinnamon from AUR , but building stops due to "Requested URL not found 404 error".
Here are the complete results
==> Making package: cinnamon 1.6.7-3 (Sat Dec 15 15:40:32 EET 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found cinnamon-1.6.7.tar.gz
-> Downloading cinnamon-screensaver.desktop...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:02 --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
==> ERROR: Failure while downloading cinnamon-screensaver.desktop
Aborting...
Of course I have Internet up and running as I post right now and already build and installed muffin-wm (the required dependency without problems.)
Tried to uncomment some other mirrors , but to no avail.
Should I wait ? (maybe server is down or URL moved ? )
Thanks
Last edited by NikTh (2012-12-16 04:26:33)

There you go:
# Maintainer:
# Contributor: M0Rf30
# Contributor: unifiedlinux
# Contributor: CReimer
pkgname=cinnamon
pkgver=1.6.7
pkgrel=3
pkgdesc="Linux desktop which provides advanced innovative features and a traditional user experience"
arch=('i686' 'x86_64')
url="http://cinnamon.linuxmint.com/"
license=('GPL2')
depends=('caribou' 'gjs' 'gnome-bluetooth' 'gnome-control-center' 'gnome-panel' 'gnome-session'
'gnome-settings-daemon' 'gnome-themes-standard' 'gstreamer0.10' 'libgnomekbd' 'muffin-wm'
'notification-daemon' 'python2-gconf' 'python2-imaging' 'python2-lxml' 'python2-dbus')
makedepends=('gnome-common' 'intltool')
optdepends=('nemo-fm: Official Cinnamon file manager (a Nautilus fork)'
'nautilus: Official Gnome file manager')
options=('!libtool' '!emptydirs')
install=${pkgname}.install
source=("$pkgname-$pkgver.tar.gz::https://github.com/linuxmint/$pkgname/tarball/$pkgver"
https://github.com/faidoc/cinnarch-packages/blob/master/cinnamon/cinnamon-screensaver.desktop
https://github.com/faidoc/cinnarch-packages/blob/master/cinnamon/cinnamon2d-screensaver.desktop)
build() {
cd ${srcdir}/linuxmint-Cinnamon*
sed -i 's/\ --warn-all\ --warn-error//' src/Makefile.am
./autogen.sh --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/lib/cinnamon \
--localstatedir=/var \
--disable-static \
--disable-schemas-compile \
--enable-compile-warnings=yes \
--with-session-tracking=systemd
make
package() {
cd ${srcdir}/linuxmint-Cinnamon*
make DESTDIR="${pkgdir}" install
#Run python2 instead of python(3)
sed -i 's/bin\/python/bin\/python2/g' \
"${pkgdir}/usr/bin/$pkgname-extension-tool" \
"${pkgdir}/usr/bin/$pkgname-launcher" \
"${pkgdir}/usr/bin/$pkgname-menu-editor" \
"${pkgdir}/usr/bin/$pkgname-settings" \
"${pkgdir}/usr/share/$pkgname/applets/panel-launchers@$pkgname.org/$pkgname-add-panel-launcher.py"
sed -i 's/env python/env python2/g' \
"${pkgdir}/usr/lib/$pkgname-settings/$pkgname-settings.py"
install -Dm644 $srcdir/${pkgname}-screensaver.desktop ${pkgdir}/etc/xdg/autostart/${pkgname}-screensaver.desktop
install -Dm644 $srcdir/${pkgname}2d-screensaver.desktop ${pkgdir}/etc/xdg/autostart/${pkgname}2d-screensaver.desktop
md5sums=('ea73c6367d43d82c61f977477bf0c08c'
'd55c079cdc8bec606f510f87b2a6f776'
'5c6af851ab1cf7e9219f11d86353196a')
md5sums=('ea73c6367d43d82c61f977477bf0c08c'
'edbb612b0ed725b87d743654fbb9f3e3'
'36a2725ca983e9f5d6b3e6a9ea6e0113')

SOLVED Cannot view .pgm and .ppm images

Hi,
I tried to view some .pgm and .ppm images produced by my APT weather satellite image receiver but gqview could not open them. Tried mirage but have same problem. Only gimp opens these type of images.
Last time I tried to view .pgm images was probably more than 3 weeks ago so the problem may have developed after some recent -Syu. Any ideas please?
Looks like the pgm and ppm (at least) file formats spec has changed. I compared with a pgm file saved by gimp and there is a hash-prefixed comment line below the P5. I inserted one in the files produced by my app and now gqview (and others) open them OK. Example:
P5
#comment (anything)
800 600
255
data.........
works ok but:
P5
800 600
255
data.........
can only be opened by gimp.
But still there is another strange problem, when I "open as text" an uncommented .pgm file in gvim, it seems to go into a long loop trying to open the file and has to be stopped with a user interrupt. With a commented file it has no problem!!??
Last edited by neok (2008-11-01 17:51:30)

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu Bar
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

[SOLVED] Cinnamon 2.4.6 cinnamon-settings themes segmentation fault

Hello,
I cannot get into the cinnamon-settings themes application. I debugged it with gdb:
Loading Themes module
[New Thread 0x7fffd233f700 (LWP 22746)]
[New Thread 0x7fffd3341700 (LWP 22695)]
[New Thread 0x7fffd4560700 (LWP 22692)]
[New Thread 0x7fffdf3d2700 (LWP 22687)]
[New Thread 0x7fffe9948700 (LWP 22680)]
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff33741a2 in ?? () from /usr/lib/libgtk-3.so.0
If I run it on console
~$ cinnamon-settings themes
Python module
Could not find bluetooth module; is the cinnamon-control-center package installed?
Loading Themes module
Segmentation fault (core dumped)
and from journalctl -x
-- Subject: Process 22999 (cinnamon-settin) dumped core
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Documentation: man:core(5)
-- Process 22999 (cinnamon-settin) crashed and dumped core.
-- This usually indicates a programming error in the crashing program and
-- should be reported to its vendor as a bug.
kernel: cinnamon-settin[22999]: segfault at 7f9ac9984045 ip 00007f9a87c0b1a2 sp 00007ffe3f759510 error 4 in libgtk-3.so.0.1400.9[7f9a87a57000+6ac000]
I've already reset all cinnamon settings and removed my used cinnamon theme numix and numix gtk theme. Also I created an softlink for default in ~/.themes, ~/.icons to Adwaita, because I've read that this is the gtk3 default Theme.
Has someone experienced the same problem?
this is my first post here, I hope someone can help me.
Tim
Last edited by quaddy (2015-04-08 11:42:34)

Hi,
update: after the last few updates the problem has vanished.. don't know why and what package was affected..
Tim

[SOLVED] cinnamon-settings doesn't start (segmentation fault)

Hi
I cannot start cinnamon-settings anymore, I get a segmentation fault error.
Here's the output of gdb:
Starting program: /usr/bin/python2 /usr/bin/cinnamon-settings
Got object file from memory but can't read symbols: File truncated.
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
process 1430 is executing new program: /usr/bin/python2.7
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
[New Thread 0x7fffe97ee700 (LWP 1434)]
Error while mapping shared library sections:
`/usr/lib/python2.7/site-packages/PIL/_imaging.so': not in executable format: File format not recognized
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7a9314b in PyModule_GetDict () from /usr/lib/libpython2.7.so.1.0
(gdb) bt
#0 0x00007ffff7a9314b in PyModule_GetDict () from /usr/lib/libpython2.7.so.1.0
#1 0x00007fffe1ddc68e in ?? ()
#2 0x0000000000c1e310 in ?? ()
#3 0x00007ffff7dd5058 in extensions () from /usr/lib/libpython2.7.so.1.0
#4 0x0000000000c1e310 in ?? ()
#5 0x00007ffff7b03807 in _PyImport_LoadDynamicModule ()
from /usr/lib/libpython2.7.so.1.0
#6 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
#7 0x00007ffff7b01dc6 in ensure_fromlist () from /usr/lib/libpython2.7.so.1.0
#8 0x00007ffff7b02615 in PyImport_ImportModuleLevel ()
from /usr/lib/libpython2.7.so.1.0
#9 0x00007ffff7ae7d48 in builtin___import__ ()
from /usr/lib/libpython2.7.so.1.0
#10 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
#11 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
from /usr/lib/libpython2.7.so.1.0
#12 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
from /usr/lib/libpython2.7.so.1.0
#13 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
from /usr/lib/libpython2.7.so.1.0
#14 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
#15 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
from /usr/lib/libpython2.7.so.1.0
---Type <return> to continue, or q <return> to quit---
#16 0x00007ffff7b00c33 in load_source_module ()
from /usr/lib/libpython2.7.so.1.0
#17 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
#18 0x00007ffff7b01dc6 in ensure_fromlist () from /usr/lib/libpython2.7.so.1.0
#19 0x00007ffff7b02615 in PyImport_ImportModuleLevel ()
from /usr/lib/libpython2.7.so.1.0
#20 0x00007ffff7ae7d48 in builtin___import__ ()
from /usr/lib/libpython2.7.so.1.0
#21 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
#22 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
from /usr/lib/libpython2.7.so.1.0
#23 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
from /usr/lib/libpython2.7.so.1.0
#24 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
from /usr/lib/libpython2.7.so.1.0
#25 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
#26 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
from /usr/lib/libpython2.7.so.1.0
#27 0x00007ffff7b00c33 in load_source_module ()
from /usr/lib/libpython2.7.so.1.0
#28 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
#29 0x00007ffff7b01b1f in load_next () from /usr/lib/libpython2.7.so.1.0
#30 0x00007ffff7b024fe in PyImport_ImportModuleLevel ()
---Type <return> to continue, or q <return> to quit---
from /usr/lib/libpython2.7.so.1.0
#31 0x00007ffff7ae7d48 in builtin___import__ ()
from /usr/lib/libpython2.7.so.1.0
#32 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
#33 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
from /usr/lib/libpython2.7.so.1.0
#34 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
from /usr/lib/libpython2.7.so.1.0
#35 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
from /usr/lib/libpython2.7.so.1.0
#36 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
#37 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
from /usr/lib/libpython2.7.so.1.0
#38 0x00007ffff7b00c33 in load_source_module ()
from /usr/lib/libpython2.7.so.1.0
#39 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
#40 0x00007ffff7b01b1f in load_next () from /usr/lib/libpython2.7.so.1.0
#41 0x00007ffff7b024fe in PyImport_ImportModuleLevel ()
from /usr/lib/libpython2.7.so.1.0
#42 0x00007ffff7ae7d48 in builtin___import__ ()
from /usr/lib/libpython2.7.so.1.0
#43 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
#44 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
---Type <return> to continue, or q <return> to quit---
from /usr/lib/libpython2.7.so.1.0
#45 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
from /usr/lib/libpython2.7.so.1.0
#46 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
from /usr/lib/libpython2.7.so.1.0
#47 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
#48 0x00007ffff7b09fef in run_mod () from /usr/lib/libpython2.7.so.1.0
#49 0x00007ffff7b0b212 in PyRun_FileExFlags ()
from /usr/lib/libpython2.7.so.1.0
#50 0x00007ffff7b0c427 in PyRun_SimpleFileExFlags ()
from /usr/lib/libpython2.7.so.1.0
#51 0x00007ffff7b1d7ca in Py_Main () from /usr/lib/libpython2.7.so.1.0
#52 0x00007ffff746f040 in __libc_start_main () from /usr/lib/libc.so.6
#53 0x000000000040073e in _start ()
(gdb)
Thanks for any help!
Last edited by arnaudm (2014-10-15 08:08:40)

arnaudm wrote:
The problem indeed came from _imaging.so, I reinstalled the package python2-pillow and everything works fine now.
Thank you!
Hey man,
Sorry to be a pain but how did you figure out that it was 'python2-pillow' that needed reinstalling?
I cant see anywhere in the log that explicitly states a problem with python2-pillow?

Cannot paste develop settings to multiple images in Lightroom 3

I have just started using Lightroom 3 and am only able to paste develop settings to one image. If I select multiple images it will only paste the setting to the active image, not all selected images. I never had this issue with Lightroom 2. Is anyone else experiencing this problem?

Hi Dorin
I think the complaint is still valid - there should be no reason that you should have to toggle to Auto Sync before being able to paste your develop settings to the entire target selection, not just the active image in the selection. It should work with that switch toggled to Sync mode as well -- there is obviously a bug here.
I am having the identical problem as the original poster. I am using LR 3.3 on a Mac, OS 10.6.5, in other words I cannot get develop settings to copy to all my selected target images while I am in the Develop module, only the active image within the target images, without toggling the Sync button to Auto Sync.
This even after the release notes for 3.3 say they have corrected for the problem "Paste Settings did not apply to all images in the Develop module Filmstrip" (see http://blogs.adobe.com/lightroomjournal/2010/12/lightroom-3-3-and-camera-raw-6-3-now-avail able.html)
This is silly. How do we ask Adobe to correct this bug?
Cheers
Adam

[SOLVED] Cinnamon settings not working

Edit: just uninstalled cinnamon git and installed cinnamon. All working now.
Hello,
Yesterday I wanted to updated Cinnamon, so I used Yaourt to get Cinnamon.. After restarting Cinnamon, I noticed very large icons in the tray (battery and volume), that actually didn't fit..
I then though maybe I had cinnamon-git before, so I used Yaourt to get cinnamon-git, which then uninstalled the normal version of Cinnamon and installed the dependencies.. Still had large icons.. So I set default settings. Fixed the icons, but now I can't open settings! :S
Anyone able to help?
Thanks.
Last edited by NorthAntrim (2012-09-16 19:04:38)

I can't open cinnamon settings either. Get this from terminal trying to open cinnamon-settings:
(cinnamon-settings.py:1233): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:51:14: Theming engine 'unico' not found
/usr/lib/python2.7/site-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed
import gobject._gobject
No module named Image
Last edited by Dotslash (2012-09-18 06:58:58)

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules"

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules". I've read through a few threads and made the recommended changes but still no luck, it crashes everytime. I have a Mac Pro 2010 with a Nivdia Quadro FX 4800.

Hello and thanks for the response. Yes, I've read that post and many others, I still get the same message when trying to open. I've realized there's no way to get tech support for any of the products I'm using. Is there another place hat can help me with this problem? I really wanted to try PP but looks like I won't be able to.
Thanks

I use Gnome, but cinnamon-settings.py launches when I right-click.

I use Gnome, but cinnamon-settings.py launches when I right-click on the desktop.
Also, I need to manually use gnome-tweak-tool to change the wallpaper; setting wallpapers
from the file manager does not work, and the Picture tab in Gnome's background settings
is empty.

'''{ Ctrl + B }''' opens and closes the Bookmarks Sidebar.

[SOLVED] Can't launch Cinnamon

I've installed cinnamon-git using yaourt. Installation was OK, but trying to launch cinnamon using causes error:
>cinnamon --replace
Window manager warning: Failed to load theme "Adwaita": Failed to find a valid file for theme
Currently wiki propose to visit http://cinnamon-spices.linuxmint.com/ .I've downloaded a theme from there and unpacked it to /usr/share/themes. But it not works too.
Then I tried to install cinnamon-themes, and no progress again: cinnamon cant find valid file for each theme I've installed.
What I've done wrong? How to install theme correctly?
Last edited by krieger (2012-06-28 19:04:46)

Heh... Thank you. I just installed cinnamon-git after xorg.

After update, I cannot launch any browsers[SOLVED]

Hello,
I've updated today my kde 4 desktop and now, I cannot launch any of my browsers.
Command line launch gives me this message:
[mak@myhost ~]$ firefox
Bus error
[mak@myhost ~]$
When I try to launch chromium, I get this message:
[mak@myhost ~]$ chromium-browser
/usr/bin/chromium-browser: line 4: 1833 Bus error ./chrome --enable-greasemonkey --enable-user-scripts "$@"
[mak@myhost ~]$
Any idea fixing this error?
Oh, and one more thing, when I try to restart the system hangs. I had to use the reset button.
Proc: 2.6 gig
Desktop kde 4.3 64bit
Mem: 6 gig
Video: radeon hd 3600
Motherbord: asus
Kernel: 2.6.31-ARCH
On a separate partition, I also run the exact same system but with xfce. The update doesn't seem to be effected the that desktop.
Thanks,
jmak
Last edited by jmak (2009-10-21 16:23:13)

This is what I got.
[mak@myhost ~]$ ls /var/run/dbus*
/var/run/dbus.pid
/var/run/dbus:
system_bus_socket
[mak@myhost ~]$ ps ax | grep dbus
1321 ? Ss 0:00 /usr/bin/dbus-daemon --system
1531 ? S 0:00 dbus-launch --autolaunch 3a1f94d4be759c3a515467be4ab68be9 --binary-syntax --close-stderr
1532 ? Ss 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
1647 ? S 0:00 dbus-launch --sh-syntax --exit-with-session
1648 ? Ss 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
1768 pts/1 S+ 0:00 grep dbus
[mak@myhost ~]$

Albums missing images yet .apalbum files contain their references

I have a project with about 4,000 color transparency scans. I organized the slides into about 150 albums in December 2006. I recently discovered that sometime between then and now (several Aperture version upgrades) about 1/3 of the albums (seemingly a random assortment) contain no images. However the images still exist in the parent project.
If I look in the .apalbum files of the empty albums I see an array of versionUuids which correspond to the missing images. If I search for those versionUuids in the appropriate .apimportgroup directory I can find the name of the image files. Using a manual search and rescue I can reconstruct the albums.
I'm looking for a way to get Aperture to reconstruct the albums itself - saving the time it will take for me to do it manually. I've tried rebuilding the library by launching Aperture and holding down CMD-OPT. I've also tried the more severe method of removing the Aperture.aplib directory and ApertureData.xml file and then rebuilding the libraries. Neither restored the albums.
Are there any other tricks that might get Aperture to reconstruct the albums?
Thanks

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

[solved] Cannot launch cinnamon-settings - missing image module

Similar Messages

Maybe you are looking for